OpenCloudOS-Kernel/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp

116 lines
3.7 KiB
Plaintext

What: /sys/devices/platform/firmware\:zynqmp-firmware/ggs*
Date: March 2020
KernelVersion: 5.6
Contact: "Jolly Shah" <jollys@xilinx.com>
Description:
Read/Write PMU global general storage register value,
GLOBAL_GEN_STORAGE{0:3}.
Global general storage register that can be used
by system to pass information between masters.
The register is reset during system or power-on
resets. Three registers are used by the FSBL and
other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
Usage::
# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
Example::
# cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
Users: Xilinx
What: /sys/devices/platform/firmware\:zynqmp-firmware/pggs*
Date: March 2020
KernelVersion: 5.6
Contact: "Jolly Shah" <jollys@xilinx.com>
Description:
Read/Write PMU persistent global general storage register
value, PERS_GLOB_GEN_STORAGE{0:3}.
Persistent global general storage register that
can be used by system to pass information between
masters.
This register is only reset by the power-on reset
and maintains its value through a system reset.
Four registers are used by the FSBL and other Xilinx
software products: PERS_GLOB_GEN_STORAGE{4:7}.
Register is reset only by a POR reset.
Usage::
# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
# echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
Example::
# cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
# echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
Users: Xilinx
What: /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
Date: March 2020
KernelVersion: 5.6
Contact: "Jolly Shah" <jollys@xilinx.com>
Description:
This sysfs interface allows to set the shutdown scope for the
next shutdown request. When the next shutdown is performed, the
platform specific portion of PSCI-system_off can use the chosen
shutdown scope.
Following are available shutdown scopes(subtypes):
subsystem:
Only the APU along with all of its peripherals
not used by other processing units will be
shut down. This may result in the FPD power
domain being shut down provided that no other
processing unit uses FPD peripherals or DRAM.
ps_only:
The complete PS will be shut down, including the
RPU, PMU, etc. Only the PL domain (FPGA)
remains untouched.
system:
The complete system/device is shut down.
Usage::
# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
# echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
Example::
# cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
# echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
Users: Xilinx
What: /sys/devices/platform/firmware\:zynqmp-firmware/health_status
Date: March 2020
KernelVersion: 5.6
Contact: "Jolly Shah" <jollys@xilinx.com>
Description:
This sysfs interface allows to set the health status. If PMUFW
is compiled with CHECK_HEALTHY_BOOT, it will check the healthy
bit on FPD WDT expiration. If healthy bit is set by a user
application running in Linux, PMUFW will do APU only restart. If
healthy bit is not set during FPD WDT expiration, PMUFW will do
system restart.
Usage:
Set healthy bit::
# echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
Unset healthy bit::
# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
Users: Xilinx