95 lines
2.4 KiB
C
95 lines
2.4 KiB
C
/*
|
|
* arch/blackfin/mach-common/clocks-init.c - reprogram clocks / memory
|
|
*
|
|
* Copyright 2004-2008 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <linux/init.h>
|
|
#include <asm/blackfin.h>
|
|
|
|
#include <asm/dma.h>
|
|
#include <asm/clocks.h>
|
|
#include <asm/mem_init.h>
|
|
|
|
#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */
|
|
#define PLL_CTL_VAL \
|
|
(((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \
|
|
(PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000))
|
|
|
|
__attribute__((l1_text))
|
|
static void do_sync(void)
|
|
{
|
|
__builtin_bfin_ssync();
|
|
}
|
|
|
|
__attribute__((l1_text))
|
|
void init_clocks(void)
|
|
{
|
|
/* Kill any active DMAs as they may trigger external memory accesses
|
|
* in the middle of reprogramming things, and that'll screw us up.
|
|
* For example, any automatic DMAs left by U-Boot for splash screens.
|
|
*/
|
|
size_t i;
|
|
for (i = 0; i < MAX_DMA_CHANNELS; ++i) {
|
|
struct dma_register *dma = dma_io_base_addr[i];
|
|
dma->cfg = 0;
|
|
}
|
|
|
|
do_sync();
|
|
|
|
#ifdef SIC_IWR0
|
|
bfin_write_SIC_IWR0(IWR_ENABLE(0));
|
|
# ifdef SIC_IWR1
|
|
/* BF52x system reset does not properly reset SIC_IWR1 which
|
|
* will screw up the bootrom as it relies on MDMA0/1 waking it
|
|
* up from IDLE instructions. See this report for more info:
|
|
* http://blackfin.uclinux.org/gf/tracker/4323
|
|
*/
|
|
if (ANOMALY_05000435)
|
|
bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11));
|
|
else
|
|
bfin_write_SIC_IWR1(IWR_DISABLE_ALL);
|
|
# endif
|
|
# ifdef SIC_IWR2
|
|
bfin_write_SIC_IWR2(IWR_DISABLE_ALL);
|
|
# endif
|
|
#else
|
|
bfin_write_SIC_IWR(IWR_ENABLE(0));
|
|
#endif
|
|
do_sync();
|
|
#ifdef EBIU_SDGCTL
|
|
bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS);
|
|
do_sync();
|
|
#endif
|
|
|
|
#ifdef CLKBUFOE
|
|
bfin_write16(VR_CTL, bfin_read_VR_CTL() | CLKBUFOE);
|
|
do_sync();
|
|
__asm__ __volatile__("IDLE;");
|
|
#endif
|
|
bfin_write_PLL_LOCKCNT(0x300);
|
|
do_sync();
|
|
bfin_write16(PLL_CTL, PLL_CTL_VAL);
|
|
__asm__ __volatile__("IDLE;");
|
|
bfin_write_PLL_DIV(CONFIG_CCLK_ACT_DIV | CONFIG_SCLK_DIV);
|
|
#ifdef EBIU_SDGCTL
|
|
bfin_write_EBIU_SDRRC(mem_SDRRC);
|
|
bfin_write_EBIU_SDGCTL((bfin_read_EBIU_SDGCTL() & SDGCTL_WIDTH) | mem_SDGCTL);
|
|
#else
|
|
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ));
|
|
do_sync();
|
|
bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1);
|
|
bfin_write_EBIU_DDRCTL0(mem_DDRCTL0);
|
|
bfin_write_EBIU_DDRCTL1(mem_DDRCTL1);
|
|
bfin_write_EBIU_DDRCTL2(mem_DDRCTL2);
|
|
#ifdef CONFIG_MEM_EBIU_DDRQUE
|
|
bfin_write_EBIU_DDRQUE(CONFIG_MEM_EBIU_DDRQUE);
|
|
#endif
|
|
#endif
|
|
do_sync();
|
|
bfin_read16(0);
|
|
}
|