OpenCloudOS-Kernel/drivers/usb
Feng-Hsin Chiang 7d50195f6c usb: host: Faraday fotg210-hcd driver
FOTG210 is an OTG controller which can be configured as an
USB2.0 host. FOTG210 host is an ehci-like controller with
some differences. First, register layout of FOTG210 is
incompatible with EHCI. Furthermore, FOTG210 is lack of
siTDs which means iTDs are used for both HS and FS ISO
transfer.

Signed-off-by: Feng-Hsin Chiang <john453@faraday-tech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29 11:15:39 -07:00
..
atm usb: atm: speedtch: be careful with bInterval 2013-07-25 11:49:30 -07:00
c67x00 usb: c67x00 RetryCnt value in c67x00 TD should be 3 2013-03-07 12:31:37 +08:00
chipidea Device tree updates for v3.11 2013-07-04 15:51:45 -07:00
class usbtmc: convert to devm_kzalloc 2013-07-25 12:01:12 -07:00
core Merge 3.11-rc3 into usb-next 2013-07-29 07:43:16 -07:00
dwc3 usb: dwc3: USB_DWC3 should depend on HAS_DMA 2013-07-15 13:05:27 +03:00
early fix build of EHCI debug port code when USB_CHIPIDEA but !USB_EHCI_HCD 2012-11-02 10:13:33 -07:00
gadget Merge 3.11-rc3 into usb-next 2013-07-29 07:43:16 -07:00
host usb: host: Faraday fotg210-hcd driver 2013-07-29 11:15:39 -07:00
image USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
misc Merge 3.11-rc3 into usb-next 2013-07-29 07:43:16 -07:00
mon USB: regroup all depends on USB within an if USB block 2013-04-09 16:49:07 -07:00
musb USB: remove unneeded idr.h include 2013-07-24 14:43:05 -07:00
phy Merge 3.11-rc3 into usb-next 2013-07-29 07:43:16 -07:00
renesas_usbhs usb: renesas_usbhs: gadget: remove extra check on udc_stop 2013-07-15 13:01:24 +03:00
serial USB: serial: pl2303: fix the upper baud rate limit check for type_0/1 chips 2013-07-29 11:14:16 -07:00
storage USB: storage: Add MicroVault Flash Drive to unusual_devs 2013-07-22 11:29:26 -07:00
wusbcore USB: HWA: fix device probe failure 2013-06-24 16:20:43 -07:00
Kconfig USB: Check for ARCH_EXYNOS separately 2013-06-19 01:25:48 +09:00
Makefile usb: host: Faraday fotg210-hcd driver 2013-07-29 11:15:39 -07:00
README
usb-common.c usb: add devicetree helpers for determining dr_mode and phy_type 2013-06-17 13:47:09 -07:00
usb-skeleton.c USB: usb-skeleton.c: add retry for nonblocking read 2013-07-25 12:01:13 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.