43 lines
1.0 KiB
Plaintext
43 lines
1.0 KiB
Plaintext
USB PHY
|
|
|
|
OMAP USB2 PHY
|
|
|
|
Required properties:
|
|
- compatible: Should be "ti,omap-usb2"
|
|
- reg : Address and length of the register set for the device.
|
|
|
|
Optional properties:
|
|
- ctrl-module : phandle of the control module used by PHY driver to power on
|
|
the PHY.
|
|
|
|
This is usually a subnode of ocp2scp to which it is connected.
|
|
|
|
usb2phy@4a0ad080 {
|
|
compatible = "ti,omap-usb2";
|
|
reg = <0x4a0ad080 0x58>;
|
|
ctrl-module = <&omap_control_usb>;
|
|
};
|
|
|
|
OMAP USB3 PHY
|
|
|
|
Required properties:
|
|
- compatible: Should be "ti,omap-usb3"
|
|
- reg : Address and length of the register set for the device.
|
|
- reg-names: The names of the register addresses corresponding to the registers
|
|
filled in "reg".
|
|
|
|
Optional properties:
|
|
- ctrl-module : phandle of the control module used by PHY driver to power on
|
|
the PHY.
|
|
|
|
This is usually a subnode of ocp2scp to which it is connected.
|
|
|
|
usb3phy@4a084400 {
|
|
compatible = "ti,omap-usb3";
|
|
reg = <0x4a084400 0x80>,
|
|
<0x4a084800 0x64>,
|
|
<0x4a084c00 0x40>;
|
|
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
|
|
ctrl-module = <&omap_control_usb>;
|
|
};
|