388 lines
9.9 KiB
C
388 lines
9.9 KiB
C
/*
|
|
* linux/arch/arm/mach-pxa/littleton.c
|
|
*
|
|
* Support for the Marvell Littleton Development Platform.
|
|
*
|
|
* Author: Jason Chagas (largely modified code)
|
|
* Created: Nov 20, 2006
|
|
* Copyright: (C) Copyright 2006 Marvell International Ltd.
|
|
*
|
|
* 2007-11-22 modified to align with latest kernel
|
|
* eric miao <eric.miao@marvell.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* publishhed by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/types.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/memory.h>
|
|
#include <asm/mach-types.h>
|
|
#include <asm/hardware.h>
|
|
#include <asm/irq.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/irq.h>
|
|
|
|
#include <asm/arch/pxa-regs.h>
|
|
#include <asm/arch/mfp-pxa300.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pxafb.h>
|
|
#include <asm/arch/ssp.h>
|
|
#include <asm/arch/pxa27x_keypad.h>
|
|
#include <asm/arch/littleton.h>
|
|
|
|
#include "generic.h"
|
|
|
|
/* Littleton MFP configurations */
|
|
static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
|
|
/* LCD */
|
|
GPIO54_LCD_LDD_0,
|
|
GPIO55_LCD_LDD_1,
|
|
GPIO56_LCD_LDD_2,
|
|
GPIO57_LCD_LDD_3,
|
|
GPIO58_LCD_LDD_4,
|
|
GPIO59_LCD_LDD_5,
|
|
GPIO60_LCD_LDD_6,
|
|
GPIO61_LCD_LDD_7,
|
|
GPIO62_LCD_LDD_8,
|
|
GPIO63_LCD_LDD_9,
|
|
GPIO64_LCD_LDD_10,
|
|
GPIO65_LCD_LDD_11,
|
|
GPIO66_LCD_LDD_12,
|
|
GPIO67_LCD_LDD_13,
|
|
GPIO68_LCD_LDD_14,
|
|
GPIO69_LCD_LDD_15,
|
|
GPIO70_LCD_LDD_16,
|
|
GPIO71_LCD_LDD_17,
|
|
GPIO72_LCD_FCLK,
|
|
GPIO73_LCD_LCLK,
|
|
GPIO74_LCD_PCLK,
|
|
GPIO75_LCD_BIAS,
|
|
|
|
/* SSP2 */
|
|
GPIO25_SSP2_SCLK,
|
|
GPIO17_SSP2_FRM,
|
|
GPIO27_SSP2_TXD,
|
|
|
|
/* Debug Ethernet */
|
|
GPIO90_GPIO,
|
|
|
|
/* Keypad */
|
|
GPIO107_KP_DKIN_0,
|
|
GPIO108_KP_DKIN_1,
|
|
GPIO115_KP_MKIN_0,
|
|
GPIO116_KP_MKIN_1,
|
|
GPIO117_KP_MKIN_2,
|
|
GPIO118_KP_MKIN_3,
|
|
GPIO119_KP_MKIN_4,
|
|
GPIO120_KP_MKIN_5,
|
|
GPIO121_KP_MKOUT_0,
|
|
GPIO122_KP_MKOUT_1,
|
|
GPIO123_KP_MKOUT_2,
|
|
GPIO124_KP_MKOUT_3,
|
|
GPIO125_KP_MKOUT_4,
|
|
};
|
|
|
|
static struct resource smc91x_resources[] = {
|
|
[0] = {
|
|
.start = (LITTLETON_ETH_PHYS + 0x300),
|
|
.end = (LITTLETON_ETH_PHYS + 0xfffff),
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
[1] = {
|
|
.start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
|
|
.end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
|
|
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
|
}
|
|
};
|
|
|
|
static struct platform_device smc91x_device = {
|
|
.name = "smc91x",
|
|
.id = 0,
|
|
.num_resources = ARRAY_SIZE(smc91x_resources),
|
|
.resource = smc91x_resources,
|
|
};
|
|
|
|
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
|
|
/* use bit 30, 31 as the indicator of command parameter number */
|
|
#define CMD0(x) ((0x00000000) | ((x) << 9))
|
|
#define CMD1(x, x1) ((0x40000000) | ((x) << 9) | 0x100 | (x1))
|
|
#define CMD2(x, x1, x2) ((0x80000000) | ((x) << 18) | 0x20000 |\
|
|
((x1) << 9) | 0x100 | (x2))
|
|
|
|
static uint32_t lcd_panel_reset[] = {
|
|
CMD0(0x1), /* reset */
|
|
CMD0(0x0), /* nop */
|
|
CMD0(0x0), /* nop */
|
|
CMD0(0x0), /* nop */
|
|
};
|
|
|
|
static uint32_t lcd_panel_on[] = {
|
|
CMD0(0x29), /* Display ON */
|
|
CMD2(0xB8, 0xFF, 0xF9), /* Output Control */
|
|
CMD0(0x11), /* Sleep out */
|
|
CMD1(0xB0, 0x16), /* Wake */
|
|
};
|
|
|
|
static uint32_t lcd_panel_off[] = {
|
|
CMD0(0x28), /* Display OFF */
|
|
CMD2(0xB8, 0x80, 0x02), /* Output Control */
|
|
CMD0(0x10), /* Sleep in */
|
|
CMD1(0xB0, 0x00), /* Deep stand by in */
|
|
};
|
|
|
|
static uint32_t lcd_vga_pass_through[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x80),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x36, 0x50),
|
|
CMD1(0x3B, 0x00),
|
|
};
|
|
|
|
static uint32_t lcd_qvga_pass_through[] = {
|
|
CMD1(0xB0, 0x16),
|
|
CMD1(0xBC, 0x81),
|
|
CMD1(0xE1, 0x00),
|
|
CMD1(0x36, 0x50),
|
|
CMD1(0x3B, 0x22),
|
|
};
|
|
|
|
static uint32_t lcd_vga_transfer[] = {
|
|
CMD1(0xcf, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd0, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd1, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd2, 0x14, 0x00), /* CKV 1,2 timing control */
|
|
CMD2(0xd3, 0x1a, 0x0f), /* OEV timing control */
|
|
CMD2(0xd4, 0x1f, 0xaf), /* ASW timing control (1) */
|
|
CMD1(0xd5, 0x14), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
};
|
|
|
|
static uint32_t lcd_qvga_transfer[] = {
|
|
CMD1(0xd6, 0x02), /* Blanking period control (1) */
|
|
CMD2(0xd7, 0x08, 0x04), /* Blanking period control (2) */
|
|
CMD1(0xd8, 0x01), /* CKV timing control on/off */
|
|
CMD2(0xd9, 0x00, 0x08), /* CKV 1,2 timing control */
|
|
CMD2(0xde, 0x05, 0x0a), /* OEV timing control */
|
|
CMD2(0xdf, 0x0a, 0x19), /* ASW timing control (1) */
|
|
CMD1(0xe0, 0x0a), /* ASW timing control (2) */
|
|
CMD0(0x21), /* Invert for normally black display */
|
|
CMD0(0x29), /* Display on */
|
|
};
|
|
|
|
static uint32_t lcd_panel_config[] = {
|
|
CMD2(0xb8, 0xff, 0xf9), /* Output control */
|
|
CMD0(0x11), /* sleep out */
|
|
CMD1(0xba, 0x01), /* Display mode (1) */
|
|
CMD1(0xbb, 0x00), /* Display mode (2) */
|
|
CMD1(0x3a, 0x60), /* Display mode 18-bit RGB */
|
|
CMD1(0xbf, 0x10), /* Drive system change control */
|
|
CMD1(0xb1, 0x56), /* Booster operation setup */
|
|
CMD1(0xb2, 0x33), /* Booster mode setup */
|
|
CMD1(0xb3, 0x11), /* Booster frequency setup */
|
|
CMD1(0xb4, 0x02), /* Op amp/system clock */
|
|
CMD1(0xb5, 0x35), /* VCS voltage */
|
|
CMD1(0xb6, 0x40), /* VCOM voltage */
|
|
CMD1(0xb7, 0x03), /* External display signal */
|
|
CMD1(0xbd, 0x00), /* ASW slew rate */
|
|
CMD1(0xbe, 0x00), /* Dummy data for QuadData operation */
|
|
CMD1(0xc0, 0x11), /* Sleep out FR count (A) */
|
|
CMD1(0xc1, 0x11), /* Sleep out FR count (B) */
|
|
CMD1(0xc2, 0x11), /* Sleep out FR count (C) */
|
|
CMD2(0xc3, 0x20, 0x40), /* Sleep out FR count (D) */
|
|
CMD2(0xc4, 0x60, 0xc0), /* Sleep out FR count (E) */
|
|
CMD2(0xc5, 0x10, 0x20), /* Sleep out FR count (F) */
|
|
CMD1(0xc6, 0xc0), /* Sleep out FR count (G) */
|
|
CMD2(0xc7, 0x33, 0x43), /* Gamma 1 fine tuning (1) */
|
|
CMD1(0xc8, 0x44), /* Gamma 1 fine tuning (2) */
|
|
CMD1(0xc9, 0x33), /* Gamma 1 inclination adjustment */
|
|
CMD1(0xca, 0x00), /* Gamma 1 blue offset adjustment */
|
|
CMD2(0xec, 0x01, 0xf0), /* Horizontal clock cycles */
|
|
};
|
|
|
|
static void ssp_reconfig(struct ssp_dev *dev, int nparam)
|
|
{
|
|
static int last_nparam = -1;
|
|
|
|
/* check if it is necessary to re-config SSP */
|
|
if (nparam == last_nparam)
|
|
return;
|
|
|
|
ssp_disable(dev);
|
|
ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
|
|
|
|
last_nparam = nparam;
|
|
}
|
|
|
|
static void ssp_send_cmd(uint32_t *cmd, int num)
|
|
{
|
|
static int ssp_initialized;
|
|
static struct ssp_dev ssp2;
|
|
|
|
int i;
|
|
|
|
if (!ssp_initialized) {
|
|
ssp_init(&ssp2, 2, SSP_NO_IRQ);
|
|
ssp_initialized = 1;
|
|
}
|
|
|
|
clk_enable(ssp2.ssp->clk);
|
|
for (i = 0; i < num; i++, cmd++) {
|
|
ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
|
|
ssp_write_word(&ssp2, *cmd & 0x3fffffff);
|
|
|
|
/* FIXME: ssp_flush() is mandatory here to work */
|
|
ssp_flush(&ssp2);
|
|
}
|
|
clk_disable(ssp2.ssp->clk);
|
|
}
|
|
|
|
static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
|
|
{
|
|
if (on) {
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
|
|
if (var->xres > 240) {
|
|
/* VGA */
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
|
|
} else {
|
|
/* QVGA */
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
|
|
}
|
|
} else
|
|
ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
|
|
}
|
|
|
|
static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
|
|
[0] = {
|
|
/* VGA */
|
|
.pixclock = 38250,
|
|
.xres = 480,
|
|
.yres = 640,
|
|
.bpp = 16,
|
|
.hsync_len = 8,
|
|
.left_margin = 8,
|
|
.right_margin = 24,
|
|
.vsync_len = 2,
|
|
.upper_margin = 2,
|
|
.lower_margin = 4,
|
|
.sync = 0,
|
|
},
|
|
[1] = {
|
|
/* QVGA */
|
|
.pixclock = 153000,
|
|
.xres = 240,
|
|
.yres = 320,
|
|
.bpp = 16,
|
|
.hsync_len = 8,
|
|
.left_margin = 8,
|
|
.right_margin = 88,
|
|
.vsync_len = 2,
|
|
.upper_margin = 2,
|
|
.lower_margin = 2,
|
|
.sync = 0,
|
|
},
|
|
};
|
|
|
|
static struct pxafb_mach_info littleton_lcd_info = {
|
|
.modes = tpo_tdo24mtea1_modes,
|
|
.num_modes = 2,
|
|
.lcd_conn = LCD_COLOR_TFT_16BPP,
|
|
.pxafb_lcd_power = littleton_lcd_power,
|
|
};
|
|
|
|
static void littleton_init_lcd(void)
|
|
{
|
|
set_pxa_fb_info(&littleton_lcd_info);
|
|
}
|
|
#else
|
|
static inline void littleton_init_lcd(void) {};
|
|
#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
|
|
|
|
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
|
|
static unsigned int littleton_matrix_key_map[] = {
|
|
/* KEY(row, col, key_code) */
|
|
KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
|
|
KEY(0, 1, KEY_4), KEY(1, 1, KEY_5), KEY(2, 1, KEY_6), KEY(0, 2, KEY_7),
|
|
KEY(1, 2, KEY_8), KEY(2, 2, KEY_9),
|
|
|
|
KEY(0, 3, KEY_KPASTERISK), /* * */
|
|
KEY(2, 3, KEY_KPDOT), /* # */
|
|
|
|
KEY(5, 4, KEY_ENTER),
|
|
|
|
KEY(5, 0, KEY_UP),
|
|
KEY(5, 1, KEY_DOWN),
|
|
KEY(5, 2, KEY_LEFT),
|
|
KEY(5, 3, KEY_RIGHT),
|
|
KEY(3, 2, KEY_HOME),
|
|
KEY(4, 1, KEY_END),
|
|
KEY(3, 3, KEY_BACK),
|
|
|
|
KEY(4, 0, KEY_SEND),
|
|
KEY(4, 2, KEY_VOLUMEUP),
|
|
KEY(4, 3, KEY_VOLUMEDOWN),
|
|
|
|
KEY(3, 0, KEY_F22), /* soft1 */
|
|
KEY(3, 1, KEY_F23), /* soft2 */
|
|
};
|
|
|
|
static struct pxa27x_keypad_platform_data littleton_keypad_info = {
|
|
.matrix_key_rows = 6,
|
|
.matrix_key_cols = 5,
|
|
.matrix_key_map = littleton_matrix_key_map,
|
|
.matrix_key_map_size = ARRAY_SIZE(littleton_matrix_key_map),
|
|
|
|
.enable_rotary0 = 1,
|
|
.rotary0_up_key = KEY_UP,
|
|
.rotary0_down_key = KEY_DOWN,
|
|
|
|
.debounce_interval = 30,
|
|
};
|
|
static void __init littleton_init_keypad(void)
|
|
{
|
|
pxa_set_keypad_info(&littleton_keypad_info);
|
|
}
|
|
#else
|
|
static inline void littleton_init_keypad(void) {}
|
|
#endif
|
|
|
|
static void __init littleton_init(void)
|
|
{
|
|
/* initialize MFP configurations */
|
|
pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
|
|
|
|
/*
|
|
* Note: we depend bootloader set the correct
|
|
* value to MSC register for SMC91x.
|
|
*/
|
|
platform_device_register(&smc91x_device);
|
|
|
|
littleton_init_lcd();
|
|
littleton_init_keypad();
|
|
}
|
|
|
|
MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
|
|
.phys_io = 0x40000000,
|
|
.boot_params = 0xa0000100,
|
|
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
|
|
.map_io = pxa_map_io,
|
|
.init_irq = pxa3xx_init_irq,
|
|
.timer = &pxa_timer,
|
|
.init_machine = littleton_init,
|
|
MACHINE_END
|