OpenCloudOS-Kernel/arch/arm/boot/dts/kirkwood-6282.dtsi

157 lines
3.9 KiB
Plaintext

/ {
mbus {
pcie-controller {
compatible = "marvell,kirkwood-pcie";
status = "disabled";
device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x00 0xff>;
ranges =
<0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000
0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */
0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>;
pcie@1,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 9>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 2>;
status = "disabled";
};
pcie@2,0 {
device_type = "pci";
assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>;
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
interrupt-map = <0 0 0 0 &intc 10>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gate_clk 18>;
status = "disabled";
};
};
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
compatible = "marvell,88f6282-pinctrl";
reg = <0x10000 0x20>;
pmx_nand: pmx-nand {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
"mpp4", "mpp5", "mpp18", "mpp19";
marvell,function = "nand";
};
pmx_sata0: pmx-sata0 {
marvell,pins = "mpp5", "mpp21", "mpp23";
marvell,function = "sata0";
};
pmx_sata1: pmx-sata1 {
marvell,pins = "mpp4", "mpp20", "mpp22";
marvell,function = "sata1";
};
pmx_spi: pmx-spi {
marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3";
marvell,function = "spi";
};
pmx_twsi0: pmx-twsi0 {
marvell,pins = "mpp8", "mpp9";
marvell,function = "twsi0";
};
pmx_twsi1: pmx-twsi1 {
marvell,pins = "mpp36", "mpp37";
marvell,function = "twsi1";
};
pmx_uart0: pmx-uart0 {
marvell,pins = "mpp10", "mpp11";
marvell,function = "uart0";
};
pmx_uart1: pmx-uart1 {
marvell,pins = "mpp13", "mpp14";
marvell,function = "uart1";
};
pmx_sdio: pmx-sdio {
marvell,pins = "mpp12", "mpp13", "mpp14",
"mpp15", "mpp16", "mpp17";
marvell,function = "sdio";
};
};
thermal@10078 {
compatible = "marvell,kirkwood-thermal";
reg = <0x10078 0x4>;
status = "okay";
};
rtc@10300 {
compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
reg = <0x10300 0x20>;
interrupts = <53>;
clocks = <&gate_clk 7>;
};
i2c@11100 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <32>;
clock-frequency = <100000>;
clocks = <&gate_clk 7>;
status = "disabled";
};
sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <21>;
clocks = <&gate_clk 14>, <&gate_clk 15>;
clock-names = "0", "1";
phys = <&sata_phy0>, <&sata_phy1>;
phy-names = "port0", "port1";
status = "disabled";
};
mvsdio@90000 {
compatible = "marvell,orion-sdio";
reg = <0x90000 0x200>;
interrupts = <28>;
clocks = <&gate_clk 4>;
pinctrl-0 = <&pmx_sdio>;
pinctrl-names = "default";
bus-width = <4>;
cap-sdio-irq;
cap-sd-highspeed;
cap-mmc-highspeed;
status = "disabled";
};
};
};