226 lines
7.2 KiB
C
226 lines
7.2 KiB
C
/*
|
|
* drivers/net/ethernet/mellanox/mlxsw/pci.h
|
|
* Copyright (c) 2015 Mellanox Technologies. All rights reserved.
|
|
* Copyright (c) 2015 Jiri Pirko <jiri@mellanox.com>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the names of the copyright holders nor the names of its
|
|
* contributors may be used to endorse or promote products derived from
|
|
* this software without specific prior written permission.
|
|
*
|
|
* Alternatively, this software may be distributed under the terms of the
|
|
* GNU General Public License ("GPL") version 2 as published by the Free
|
|
* Software Foundation.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _MLXSW_PCI_H
|
|
#define _MLXSW_PCI_H
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include "item.h"
|
|
|
|
#define PCI_DEVICE_ID_MELLANOX_SWITCHX2 0xc738
|
|
#define MLXSW_PCI_BAR0_SIZE (1024 * 1024) /* 1MB */
|
|
#define MLXSW_PCI_PAGE_SIZE 4096
|
|
|
|
#define MLXSW_PCI_CIR_BASE 0x71000
|
|
#define MLXSW_PCI_CIR_IN_PARAM_HI MLXSW_PCI_CIR_BASE
|
|
#define MLXSW_PCI_CIR_IN_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x04)
|
|
#define MLXSW_PCI_CIR_IN_MODIFIER (MLXSW_PCI_CIR_BASE + 0x08)
|
|
#define MLXSW_PCI_CIR_OUT_PARAM_HI (MLXSW_PCI_CIR_BASE + 0x0C)
|
|
#define MLXSW_PCI_CIR_OUT_PARAM_LO (MLXSW_PCI_CIR_BASE + 0x10)
|
|
#define MLXSW_PCI_CIR_TOKEN (MLXSW_PCI_CIR_BASE + 0x14)
|
|
#define MLXSW_PCI_CIR_CTRL (MLXSW_PCI_CIR_BASE + 0x18)
|
|
#define MLXSW_PCI_CIR_CTRL_GO_BIT BIT(23)
|
|
#define MLXSW_PCI_CIR_CTRL_EVREQ_BIT BIT(22)
|
|
#define MLXSW_PCI_CIR_CTRL_OPCODE_MOD_SHIFT 12
|
|
#define MLXSW_PCI_CIR_CTRL_STATUS_SHIFT 24
|
|
#define MLXSW_PCI_CIR_TIMEOUT_MSECS 1000
|
|
|
|
#define MLXSW_PCI_SW_RESET 0xF0010
|
|
#define MLXSW_PCI_SW_RESET_RST_BIT BIT(0)
|
|
#define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000
|
|
|
|
#define MLXSW_PCI_DOORBELL_SDQ_OFFSET 0x000
|
|
#define MLXSW_PCI_DOORBELL_RDQ_OFFSET 0x200
|
|
#define MLXSW_PCI_DOORBELL_CQ_OFFSET 0x400
|
|
#define MLXSW_PCI_DOORBELL_EQ_OFFSET 0x600
|
|
#define MLXSW_PCI_DOORBELL_ARM_CQ_OFFSET 0x800
|
|
#define MLXSW_PCI_DOORBELL_ARM_EQ_OFFSET 0xA00
|
|
|
|
#define MLXSW_PCI_DOORBELL(offset, type_offset, num) \
|
|
((offset) + (type_offset) + (num) * 4)
|
|
|
|
#define MLXSW_PCI_CQS_MAX 96
|
|
#define MLXSW_PCI_EQS_COUNT 2
|
|
#define MLXSW_PCI_EQ_ASYNC_NUM 0
|
|
#define MLXSW_PCI_EQ_COMP_NUM 1
|
|
|
|
#define MLXSW_PCI_AQ_PAGES 8
|
|
#define MLXSW_PCI_AQ_SIZE (MLXSW_PCI_PAGE_SIZE * MLXSW_PCI_AQ_PAGES)
|
|
#define MLXSW_PCI_WQE_SIZE 32 /* 32 bytes per element */
|
|
#define MLXSW_PCI_CQE_SIZE 16 /* 16 bytes per element */
|
|
#define MLXSW_PCI_EQE_SIZE 16 /* 16 bytes per element */
|
|
#define MLXSW_PCI_WQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_WQE_SIZE)
|
|
#define MLXSW_PCI_CQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_CQE_SIZE)
|
|
#define MLXSW_PCI_EQE_COUNT (MLXSW_PCI_AQ_SIZE / MLXSW_PCI_EQE_SIZE)
|
|
#define MLXSW_PCI_EQE_UPDATE_COUNT 0x80
|
|
|
|
#define MLXSW_PCI_WQE_SG_ENTRIES 3
|
|
#define MLXSW_PCI_WQE_TYPE_ETHERNET 0xA
|
|
|
|
/* pci_wqe_c
|
|
* If set it indicates that a completion should be reported upon
|
|
* execution of this descriptor.
|
|
*/
|
|
MLXSW_ITEM32(pci, wqe, c, 0x00, 31, 1);
|
|
|
|
/* pci_wqe_lp
|
|
* Local Processing, set if packet should be processed by the local
|
|
* switch hardware:
|
|
* For Ethernet EMAD (Direct Route and non Direct Route) -
|
|
* must be set if packet destination is local device
|
|
* For InfiniBand CTL - must be set if packet destination is local device
|
|
* Otherwise it must be clear
|
|
* Local Process packets must not exceed the size of 2K (including payload
|
|
* and headers).
|
|
*/
|
|
MLXSW_ITEM32(pci, wqe, lp, 0x00, 30, 1);
|
|
|
|
/* pci_wqe_type
|
|
* Packet type.
|
|
*/
|
|
MLXSW_ITEM32(pci, wqe, type, 0x00, 23, 4);
|
|
|
|
/* pci_wqe_byte_count
|
|
* Size of i-th scatter/gather entry, 0 if entry is unused.
|
|
*/
|
|
MLXSW_ITEM16_INDEXED(pci, wqe, byte_count, 0x02, 0, 14, 0x02, 0x00, false);
|
|
|
|
/* pci_wqe_address
|
|
* Physical address of i-th scatter/gather entry.
|
|
* Gather Entries must be 2Byte aligned.
|
|
*/
|
|
MLXSW_ITEM64_INDEXED(pci, wqe, address, 0x08, 0, 64, 0x8, 0x0, false);
|
|
|
|
/* pci_cqe_lag
|
|
* Packet arrives from a port which is a LAG
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, lag, 0x00, 23, 1);
|
|
|
|
/* pci_cqe_system_port
|
|
* When lag=0: System port on which the packet was received
|
|
* When lag=1:
|
|
* bits [15:4] LAG ID on which the packet was received
|
|
* bits [3:0] sub_port on which the packet was received
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, system_port, 0x00, 0, 16);
|
|
|
|
/* pci_cqe_wqe_counter
|
|
* WQE count of the WQEs completed on the associated dqn
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, wqe_counter, 0x04, 16, 16);
|
|
|
|
/* pci_cqe_byte_count
|
|
* Byte count of received packets including additional two
|
|
* Reserved Bytes that are append to the end of the frame.
|
|
* Reserved for Send CQE.
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, byte_count, 0x04, 0, 14);
|
|
|
|
/* pci_cqe_trap_id
|
|
* Trap ID that captured the packet.
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, trap_id, 0x08, 0, 8);
|
|
|
|
/* pci_cqe_crc
|
|
* Length include CRC. Indicates the length field includes
|
|
* the packet's CRC.
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, crc, 0x0C, 8, 1);
|
|
|
|
/* pci_cqe_e
|
|
* CQE with Error.
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, e, 0x0C, 7, 1);
|
|
|
|
/* pci_cqe_sr
|
|
* 1 - Send Queue
|
|
* 0 - Receive Queue
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, sr, 0x0C, 6, 1);
|
|
|
|
/* pci_cqe_dqn
|
|
* Descriptor Queue (DQ) Number.
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, dqn, 0x0C, 1, 5);
|
|
|
|
/* pci_cqe_owner
|
|
* Ownership bit.
|
|
*/
|
|
MLXSW_ITEM32(pci, cqe, owner, 0x0C, 0, 1);
|
|
|
|
/* pci_eqe_event_type
|
|
* Event type.
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, event_type, 0x0C, 24, 8);
|
|
#define MLXSW_PCI_EQE_EVENT_TYPE_COMP 0x00
|
|
#define MLXSW_PCI_EQE_EVENT_TYPE_CMD 0x0A
|
|
|
|
/* pci_eqe_event_sub_type
|
|
* Event type.
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, event_sub_type, 0x0C, 16, 8);
|
|
|
|
/* pci_eqe_cqn
|
|
* Completion Queue that triggeret this EQE.
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, cqn, 0x0C, 8, 7);
|
|
|
|
/* pci_eqe_owner
|
|
* Ownership bit.
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, owner, 0x0C, 0, 1);
|
|
|
|
/* pci_eqe_cmd_token
|
|
* Command completion event - token
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, cmd_token, 0x08, 16, 16);
|
|
|
|
/* pci_eqe_cmd_status
|
|
* Command completion event - status
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, cmd_status, 0x08, 0, 8);
|
|
|
|
/* pci_eqe_cmd_out_param_h
|
|
* Command completion event - output parameter - higher part
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, cmd_out_param_h, 0x0C, 0, 32);
|
|
|
|
/* pci_eqe_cmd_out_param_l
|
|
* Command completion event - output parameter - lower part
|
|
*/
|
|
MLXSW_ITEM32(pci, eqe, cmd_out_param_l, 0x10, 0, 32);
|
|
|
|
#endif
|