345 lines
8.4 KiB
C
345 lines
8.4 KiB
C
/*
|
|
* pata_cs5536.c - CS5536 PATA for new ATA layer
|
|
* (C) 2007 Martin K. Petersen <mkp@mkp.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* Documentation:
|
|
* Available from AMD web site.
|
|
*
|
|
* The IDE timing registers for the CS5536 live in the Geode Machine
|
|
* Specific Register file and not PCI config space. Most BIOSes
|
|
* virtualize the PCI registers so the chip looks like a standard IDE
|
|
* controller. Unfortunately not all implementations get this right.
|
|
* In particular some have problems with unaligned accesses to the
|
|
* virtualized PCI registers. This driver always does full dword
|
|
* writes to work around the issue. Also, in case of a bad BIOS this
|
|
* driver can be loaded with the "msr=1" parameter which forces using
|
|
* the Machine Specific Registers to configure the device.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/libata.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <asm/msr.h>
|
|
|
|
#define DRV_NAME "pata_cs5536"
|
|
#define DRV_VERSION "0.0.6"
|
|
|
|
enum {
|
|
CFG = 0,
|
|
DTC = 1,
|
|
CAST = 2,
|
|
ETC = 3,
|
|
|
|
MSR_IDE_BASE = 0x51300000,
|
|
MSR_IDE_CFG = (MSR_IDE_BASE + 0x10),
|
|
MSR_IDE_DTC = (MSR_IDE_BASE + 0x12),
|
|
MSR_IDE_CAST = (MSR_IDE_BASE + 0x13),
|
|
MSR_IDE_ETC = (MSR_IDE_BASE + 0x14),
|
|
|
|
PCI_IDE_CFG = 0x40,
|
|
PCI_IDE_DTC = 0x48,
|
|
PCI_IDE_CAST = 0x4c,
|
|
PCI_IDE_ETC = 0x50,
|
|
|
|
IDE_CFG_CHANEN = 0x2,
|
|
IDE_CFG_CABLE = 0x10000,
|
|
|
|
IDE_D0_SHIFT = 24,
|
|
IDE_D1_SHIFT = 16,
|
|
IDE_DRV_MASK = 0xff,
|
|
|
|
IDE_CAST_D0_SHIFT = 6,
|
|
IDE_CAST_D1_SHIFT = 4,
|
|
IDE_CAST_DRV_MASK = 0x3,
|
|
IDE_CAST_CMD_MASK = 0xff,
|
|
IDE_CAST_CMD_SHIFT = 24,
|
|
|
|
IDE_ETC_NODMA = 0x03,
|
|
};
|
|
|
|
static int use_msr;
|
|
|
|
static const u32 msr_reg[4] = {
|
|
MSR_IDE_CFG, MSR_IDE_DTC, MSR_IDE_CAST, MSR_IDE_ETC,
|
|
};
|
|
|
|
static const u8 pci_reg[4] = {
|
|
PCI_IDE_CFG, PCI_IDE_DTC, PCI_IDE_CAST, PCI_IDE_ETC,
|
|
};
|
|
|
|
static inline int cs5536_read(struct pci_dev *pdev, int reg, int *val)
|
|
{
|
|
if (unlikely(use_msr)) {
|
|
u32 dummy;
|
|
|
|
rdmsr(msr_reg[reg], *val, dummy);
|
|
return 0;
|
|
}
|
|
|
|
return pci_read_config_dword(pdev, pci_reg[reg], val);
|
|
}
|
|
|
|
static inline int cs5536_write(struct pci_dev *pdev, int reg, int val)
|
|
{
|
|
if (unlikely(use_msr)) {
|
|
wrmsr(msr_reg[reg], val, 0);
|
|
return 0;
|
|
}
|
|
|
|
return pci_write_config_dword(pdev, pci_reg[reg], val);
|
|
}
|
|
|
|
/**
|
|
* cs5536_cable_detect - detect cable type
|
|
* @ap: Port to detect on
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* Perform cable detection for ATA66 capable cable. Return a libata
|
|
* cable type.
|
|
*/
|
|
|
|
static int cs5536_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 cfg;
|
|
|
|
cs5536_read(pdev, CFG, &cfg);
|
|
|
|
if (cfg & (IDE_CFG_CABLE << ap->port_no))
|
|
return ATA_CBL_PATA80;
|
|
else
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* cs5536_set_piomode - PIO setup
|
|
* @ap: ATA interface
|
|
* @adev: device on the interface
|
|
*/
|
|
|
|
static void cs5536_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const u8 drv_timings[5] = {
|
|
0x98, 0x55, 0x32, 0x21, 0x20,
|
|
};
|
|
|
|
static const u8 addr_timings[5] = {
|
|
0x2, 0x1, 0x0, 0x0, 0x0,
|
|
};
|
|
|
|
static const u8 cmd_timings[5] = {
|
|
0x99, 0x92, 0x90, 0x22, 0x20,
|
|
};
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
int mode = adev->pio_mode - XFER_PIO_0;
|
|
int cmdmode = mode;
|
|
int dshift = ap->port_no ? IDE_D1_SHIFT : IDE_D0_SHIFT;
|
|
int cshift = ap->port_no ? IDE_CAST_D1_SHIFT : IDE_CAST_D0_SHIFT;
|
|
u32 dtc, cast, etc;
|
|
|
|
if (pair)
|
|
cmdmode = min(mode, pair->pio_mode - XFER_PIO_0);
|
|
|
|
cs5536_read(pdev, DTC, &dtc);
|
|
cs5536_read(pdev, CAST, &cast);
|
|
cs5536_read(pdev, ETC, &etc);
|
|
|
|
dtc &= ~(IDE_DRV_MASK << dshift);
|
|
dtc |= drv_timings[mode] << dshift;
|
|
|
|
cast &= ~(IDE_CAST_DRV_MASK << cshift);
|
|
cast |= addr_timings[mode] << cshift;
|
|
|
|
cast &= ~(IDE_CAST_CMD_MASK << IDE_CAST_CMD_SHIFT);
|
|
cast |= cmd_timings[cmdmode] << IDE_CAST_CMD_SHIFT;
|
|
|
|
etc &= ~(IDE_DRV_MASK << dshift);
|
|
etc |= IDE_ETC_NODMA << dshift;
|
|
|
|
cs5536_write(pdev, DTC, dtc);
|
|
cs5536_write(pdev, CAST, cast);
|
|
cs5536_write(pdev, ETC, etc);
|
|
}
|
|
|
|
/**
|
|
* cs5536_set_dmamode - DMA timing setup
|
|
* @ap: ATA interface
|
|
* @adev: Device being configured
|
|
*
|
|
*/
|
|
|
|
static void cs5536_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const u8 udma_timings[6] = {
|
|
0xc2, 0xc1, 0xc0, 0xc4, 0xc5, 0xc6,
|
|
};
|
|
|
|
static const u8 mwdma_timings[3] = {
|
|
0x67, 0x21, 0x20,
|
|
};
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 dtc, etc;
|
|
int mode = adev->dma_mode;
|
|
int dshift = ap->port_no ? IDE_D1_SHIFT : IDE_D0_SHIFT;
|
|
|
|
if (mode >= XFER_UDMA_0) {
|
|
cs5536_read(pdev, ETC, &etc);
|
|
|
|
etc &= ~(IDE_DRV_MASK << dshift);
|
|
etc |= udma_timings[mode - XFER_UDMA_0] << dshift;
|
|
|
|
cs5536_write(pdev, ETC, etc);
|
|
} else { /* MWDMA */
|
|
cs5536_read(pdev, DTC, &dtc);
|
|
|
|
dtc &= ~(IDE_DRV_MASK << dshift);
|
|
dtc |= mwdma_timings[mode - XFER_MW_DMA_0] << dshift;
|
|
|
|
cs5536_write(pdev, DTC, dtc);
|
|
}
|
|
}
|
|
|
|
static struct scsi_host_template cs5536_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
static struct ata_port_operations cs5536_port_ops = {
|
|
.set_piomode = cs5536_set_piomode,
|
|
.set_dmamode = cs5536_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = cs5536_cable_detect,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
/**
|
|
* cs5536_init_one
|
|
* @dev: PCI device
|
|
* @id: Entry in match table
|
|
*
|
|
*/
|
|
|
|
static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.sht = &cs5536_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = 0x1f,
|
|
.mwdma_mask = 0x07,
|
|
.udma_mask = ATA_UDMA5,
|
|
.port_ops = &cs5536_port_ops,
|
|
};
|
|
|
|
const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
|
|
u32 cfg;
|
|
|
|
if (use_msr)
|
|
printk(KERN_ERR DRV_NAME ": Using MSR regs instead of PCI\n");
|
|
|
|
cs5536_read(dev, CFG, &cfg);
|
|
|
|
if ((cfg & IDE_CFG_CHANEN) == 0) {
|
|
printk(KERN_ERR DRV_NAME ": disabled by BIOS\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return ata_pci_init_one(dev, ppi);
|
|
}
|
|
|
|
static const struct pci_device_id cs5536[] = {
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), },
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cs5536_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = cs5536,
|
|
.probe = cs5536_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init cs5536_init(void)
|
|
{
|
|
return pci_register_driver(&cs5536_pci_driver);
|
|
}
|
|
|
|
static void __exit cs5536_exit(void)
|
|
{
|
|
pci_unregister_driver(&cs5536_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Martin K. Petersen");
|
|
MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, cs5536);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
module_param_named(msr, use_msr, int, 0644);
|
|
MODULE_PARM_DESC(msr, "Force using MSR to configure IDE function (Default: 0)");
|
|
|
|
module_init(cs5536_init);
|
|
module_exit(cs5536_exit);
|