1435 lines
35 KiB
C
1435 lines
35 KiB
C
/*
|
|
* Mediatek MT7530 DSA Switch driver
|
|
* Copyright (C) 2017 Sean Wang <sean.wang@mediatek.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/mdio.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_mdio.h>
|
|
#include <linux/of_net.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <net/dsa.h>
|
|
|
|
#include "mt7530.h"
|
|
|
|
/* String, offset, and register size in bytes if different from 4 bytes */
|
|
static const struct mt7530_mib_desc mt7530_mib[] = {
|
|
MIB_DESC(1, 0x00, "TxDrop"),
|
|
MIB_DESC(1, 0x04, "TxCrcErr"),
|
|
MIB_DESC(1, 0x08, "TxUnicast"),
|
|
MIB_DESC(1, 0x0c, "TxMulticast"),
|
|
MIB_DESC(1, 0x10, "TxBroadcast"),
|
|
MIB_DESC(1, 0x14, "TxCollision"),
|
|
MIB_DESC(1, 0x18, "TxSingleCollision"),
|
|
MIB_DESC(1, 0x1c, "TxMultipleCollision"),
|
|
MIB_DESC(1, 0x20, "TxDeferred"),
|
|
MIB_DESC(1, 0x24, "TxLateCollision"),
|
|
MIB_DESC(1, 0x28, "TxExcessiveCollistion"),
|
|
MIB_DESC(1, 0x2c, "TxPause"),
|
|
MIB_DESC(1, 0x30, "TxPktSz64"),
|
|
MIB_DESC(1, 0x34, "TxPktSz65To127"),
|
|
MIB_DESC(1, 0x38, "TxPktSz128To255"),
|
|
MIB_DESC(1, 0x3c, "TxPktSz256To511"),
|
|
MIB_DESC(1, 0x40, "TxPktSz512To1023"),
|
|
MIB_DESC(1, 0x44, "Tx1024ToMax"),
|
|
MIB_DESC(2, 0x48, "TxBytes"),
|
|
MIB_DESC(1, 0x60, "RxDrop"),
|
|
MIB_DESC(1, 0x64, "RxFiltering"),
|
|
MIB_DESC(1, 0x6c, "RxMulticast"),
|
|
MIB_DESC(1, 0x70, "RxBroadcast"),
|
|
MIB_DESC(1, 0x74, "RxAlignErr"),
|
|
MIB_DESC(1, 0x78, "RxCrcErr"),
|
|
MIB_DESC(1, 0x7c, "RxUnderSizeErr"),
|
|
MIB_DESC(1, 0x80, "RxFragErr"),
|
|
MIB_DESC(1, 0x84, "RxOverSzErr"),
|
|
MIB_DESC(1, 0x88, "RxJabberErr"),
|
|
MIB_DESC(1, 0x8c, "RxPause"),
|
|
MIB_DESC(1, 0x90, "RxPktSz64"),
|
|
MIB_DESC(1, 0x94, "RxPktSz65To127"),
|
|
MIB_DESC(1, 0x98, "RxPktSz128To255"),
|
|
MIB_DESC(1, 0x9c, "RxPktSz256To511"),
|
|
MIB_DESC(1, 0xa0, "RxPktSz512To1023"),
|
|
MIB_DESC(1, 0xa4, "RxPktSz1024ToMax"),
|
|
MIB_DESC(2, 0xa8, "RxBytes"),
|
|
MIB_DESC(1, 0xb0, "RxCtrlDrop"),
|
|
MIB_DESC(1, 0xb4, "RxIngressDrop"),
|
|
MIB_DESC(1, 0xb8, "RxArlDrop"),
|
|
};
|
|
|
|
static int
|
|
mt7623_trgmii_write(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(priv->ethernet, TRGMII_BASE(reg), val);
|
|
if (ret < 0)
|
|
dev_err(priv->dev,
|
|
"failed to priv write register\n");
|
|
return ret;
|
|
}
|
|
|
|
static u32
|
|
mt7623_trgmii_read(struct mt7530_priv *priv, u32 reg)
|
|
{
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = regmap_read(priv->ethernet, TRGMII_BASE(reg), &val);
|
|
if (ret < 0) {
|
|
dev_err(priv->dev,
|
|
"failed to priv read register\n");
|
|
return ret;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static void
|
|
mt7623_trgmii_rmw(struct mt7530_priv *priv, u32 reg,
|
|
u32 mask, u32 set)
|
|
{
|
|
u32 val;
|
|
|
|
val = mt7623_trgmii_read(priv, reg);
|
|
val &= ~mask;
|
|
val |= set;
|
|
mt7623_trgmii_write(priv, reg, val);
|
|
}
|
|
|
|
static void
|
|
mt7623_trgmii_set(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
mt7623_trgmii_rmw(priv, reg, 0, val);
|
|
}
|
|
|
|
static void
|
|
mt7623_trgmii_clear(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
mt7623_trgmii_rmw(priv, reg, val, 0);
|
|
}
|
|
|
|
static int
|
|
core_read_mmd_indirect(struct mt7530_priv *priv, int prtad, int devad)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
int value, ret;
|
|
|
|
/* Write the desired MMD Devad */
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Write the desired MMD register address */
|
|
ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Select the Function : DATA with no post increment */
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Read the content of the MMD's selected register */
|
|
value = bus->read(bus, 0, MII_MMD_DATA);
|
|
|
|
return value;
|
|
err:
|
|
dev_err(&bus->dev, "failed to read mmd register\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
core_write_mmd_indirect(struct mt7530_priv *priv, int prtad,
|
|
int devad, u32 data)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
int ret;
|
|
|
|
/* Write the desired MMD Devad */
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, devad);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Write the desired MMD register address */
|
|
ret = bus->write(bus, 0, MII_MMD_DATA, prtad);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Select the Function : DATA with no post increment */
|
|
ret = bus->write(bus, 0, MII_MMD_CTRL, (devad | MII_MMD_CTRL_NOINCR));
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* Write the data into MMD's selected register */
|
|
ret = bus->write(bus, 0, MII_MMD_DATA, data);
|
|
err:
|
|
if (ret < 0)
|
|
dev_err(&bus->dev,
|
|
"failed to write mmd register\n");
|
|
return ret;
|
|
}
|
|
|
|
static void
|
|
core_write(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
|
|
|
|
mutex_unlock(&bus->mdio_lock);
|
|
}
|
|
|
|
static void
|
|
core_rmw(struct mt7530_priv *priv, u32 reg, u32 mask, u32 set)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
u32 val;
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
val = core_read_mmd_indirect(priv, reg, MDIO_MMD_VEND2);
|
|
val &= ~mask;
|
|
val |= set;
|
|
core_write_mmd_indirect(priv, reg, MDIO_MMD_VEND2, val);
|
|
|
|
mutex_unlock(&bus->mdio_lock);
|
|
}
|
|
|
|
static void
|
|
core_set(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
core_rmw(priv, reg, 0, val);
|
|
}
|
|
|
|
static void
|
|
core_clear(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
core_rmw(priv, reg, val, 0);
|
|
}
|
|
|
|
static int
|
|
mt7530_mii_write(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
u16 page, r, lo, hi;
|
|
int ret;
|
|
|
|
page = (reg >> 6) & 0x3ff;
|
|
r = (reg >> 2) & 0xf;
|
|
lo = val & 0xffff;
|
|
hi = val >> 16;
|
|
|
|
/* MT7530 uses 31 as the pseudo port */
|
|
ret = bus->write(bus, 0x1f, 0x1f, page);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = bus->write(bus, 0x1f, r, lo);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
ret = bus->write(bus, 0x1f, 0x10, hi);
|
|
err:
|
|
if (ret < 0)
|
|
dev_err(&bus->dev,
|
|
"failed to write mt7530 register\n");
|
|
return ret;
|
|
}
|
|
|
|
static u32
|
|
mt7530_mii_read(struct mt7530_priv *priv, u32 reg)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
u16 page, r, lo, hi;
|
|
int ret;
|
|
|
|
page = (reg >> 6) & 0x3ff;
|
|
r = (reg >> 2) & 0xf;
|
|
|
|
/* MT7530 uses 31 as the pseudo port */
|
|
ret = bus->write(bus, 0x1f, 0x1f, page);
|
|
if (ret < 0) {
|
|
dev_err(&bus->dev,
|
|
"failed to read mt7530 register\n");
|
|
return ret;
|
|
}
|
|
|
|
lo = bus->read(bus, 0x1f, r);
|
|
hi = bus->read(bus, 0x1f, 0x10);
|
|
|
|
return (hi << 16) | (lo & 0xffff);
|
|
}
|
|
|
|
static void
|
|
mt7530_write(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
mt7530_mii_write(priv, reg, val);
|
|
|
|
mutex_unlock(&bus->mdio_lock);
|
|
}
|
|
|
|
static u32
|
|
_mt7530_read(struct mt7530_dummy_poll *p)
|
|
{
|
|
struct mii_bus *bus = p->priv->bus;
|
|
u32 val;
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
val = mt7530_mii_read(p->priv, p->reg);
|
|
|
|
mutex_unlock(&bus->mdio_lock);
|
|
|
|
return val;
|
|
}
|
|
|
|
static u32
|
|
mt7530_read(struct mt7530_priv *priv, u32 reg)
|
|
{
|
|
struct mt7530_dummy_poll p;
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, reg);
|
|
return _mt7530_read(&p);
|
|
}
|
|
|
|
static void
|
|
mt7530_rmw(struct mt7530_priv *priv, u32 reg,
|
|
u32 mask, u32 set)
|
|
{
|
|
struct mii_bus *bus = priv->bus;
|
|
u32 val;
|
|
|
|
mutex_lock_nested(&bus->mdio_lock, MDIO_MUTEX_NESTED);
|
|
|
|
val = mt7530_mii_read(priv, reg);
|
|
val &= ~mask;
|
|
val |= set;
|
|
mt7530_mii_write(priv, reg, val);
|
|
|
|
mutex_unlock(&bus->mdio_lock);
|
|
}
|
|
|
|
static void
|
|
mt7530_set(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
mt7530_rmw(priv, reg, 0, val);
|
|
}
|
|
|
|
static void
|
|
mt7530_clear(struct mt7530_priv *priv, u32 reg, u32 val)
|
|
{
|
|
mt7530_rmw(priv, reg, val, 0);
|
|
}
|
|
|
|
static int
|
|
mt7530_fdb_cmd(struct mt7530_priv *priv, enum mt7530_fdb_cmd cmd, u32 *rsp)
|
|
{
|
|
u32 val;
|
|
int ret;
|
|
struct mt7530_dummy_poll p;
|
|
|
|
/* Set the command operating upon the MAC address entries */
|
|
val = ATC_BUSY | ATC_MAT(0) | cmd;
|
|
mt7530_write(priv, MT7530_ATC, val);
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_ATC);
|
|
ret = readx_poll_timeout(_mt7530_read, &p, val,
|
|
!(val & ATC_BUSY), 20, 20000);
|
|
if (ret < 0) {
|
|
dev_err(priv->dev, "reset timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Additional sanity for read command if the specified
|
|
* entry is invalid
|
|
*/
|
|
val = mt7530_read(priv, MT7530_ATC);
|
|
if ((cmd == MT7530_FDB_READ) && (val & ATC_INVALID))
|
|
return -EINVAL;
|
|
|
|
if (rsp)
|
|
*rsp = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mt7530_fdb_read(struct mt7530_priv *priv, struct mt7530_fdb *fdb)
|
|
{
|
|
u32 reg[3];
|
|
int i;
|
|
|
|
/* Read from ARL table into an array */
|
|
for (i = 0; i < 3; i++) {
|
|
reg[i] = mt7530_read(priv, MT7530_TSRA1 + (i * 4));
|
|
|
|
dev_dbg(priv->dev, "%s(%d) reg[%d]=0x%x\n",
|
|
__func__, __LINE__, i, reg[i]);
|
|
}
|
|
|
|
fdb->vid = (reg[1] >> CVID) & CVID_MASK;
|
|
fdb->aging = (reg[2] >> AGE_TIMER) & AGE_TIMER_MASK;
|
|
fdb->port_mask = (reg[2] >> PORT_MAP) & PORT_MAP_MASK;
|
|
fdb->mac[0] = (reg[0] >> MAC_BYTE_0) & MAC_BYTE_MASK;
|
|
fdb->mac[1] = (reg[0] >> MAC_BYTE_1) & MAC_BYTE_MASK;
|
|
fdb->mac[2] = (reg[0] >> MAC_BYTE_2) & MAC_BYTE_MASK;
|
|
fdb->mac[3] = (reg[0] >> MAC_BYTE_3) & MAC_BYTE_MASK;
|
|
fdb->mac[4] = (reg[1] >> MAC_BYTE_4) & MAC_BYTE_MASK;
|
|
fdb->mac[5] = (reg[1] >> MAC_BYTE_5) & MAC_BYTE_MASK;
|
|
fdb->noarp = ((reg[2] >> ENT_STATUS) & ENT_STATUS_MASK) == STATIC_ENT;
|
|
}
|
|
|
|
static void
|
|
mt7530_fdb_write(struct mt7530_priv *priv, u16 vid,
|
|
u8 port_mask, const u8 *mac,
|
|
u8 aging, u8 type)
|
|
{
|
|
u32 reg[3] = { 0 };
|
|
int i;
|
|
|
|
reg[1] |= vid & CVID_MASK;
|
|
reg[2] |= (aging & AGE_TIMER_MASK) << AGE_TIMER;
|
|
reg[2] |= (port_mask & PORT_MAP_MASK) << PORT_MAP;
|
|
/* STATIC_ENT indicate that entry is static wouldn't
|
|
* be aged out and STATIC_EMP specified as erasing an
|
|
* entry
|
|
*/
|
|
reg[2] |= (type & ENT_STATUS_MASK) << ENT_STATUS;
|
|
reg[1] |= mac[5] << MAC_BYTE_5;
|
|
reg[1] |= mac[4] << MAC_BYTE_4;
|
|
reg[0] |= mac[3] << MAC_BYTE_3;
|
|
reg[0] |= mac[2] << MAC_BYTE_2;
|
|
reg[0] |= mac[1] << MAC_BYTE_1;
|
|
reg[0] |= mac[0] << MAC_BYTE_0;
|
|
|
|
/* Write array into the ARL table */
|
|
for (i = 0; i < 3; i++)
|
|
mt7530_write(priv, MT7530_ATA1 + (i * 4), reg[i]);
|
|
}
|
|
|
|
static int
|
|
mt7530_pad_clk_setup(struct dsa_switch *ds, int mode)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
u32 ncpo1, ssc_delta, trgint, i;
|
|
|
|
switch (mode) {
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
trgint = 0;
|
|
ncpo1 = 0x0c80;
|
|
ssc_delta = 0x87;
|
|
break;
|
|
case PHY_INTERFACE_MODE_TRGMII:
|
|
trgint = 1;
|
|
ncpo1 = 0x1400;
|
|
ssc_delta = 0x57;
|
|
break;
|
|
default:
|
|
dev_err(priv->dev, "xMII mode %d not supported\n", mode);
|
|
return -EINVAL;
|
|
}
|
|
|
|
mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
|
|
P6_INTF_MODE(trgint));
|
|
|
|
/* Lower Tx Driving for TRGMII path */
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL ; i++)
|
|
mt7530_write(priv, MT7530_TRGMII_TD_ODT(i),
|
|
TD_DM_DRVP(8) | TD_DM_DRVN(8));
|
|
|
|
/* Setup core clock for MT7530 */
|
|
if (!trgint) {
|
|
/* Disable MT7530 core clock */
|
|
core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
|
|
|
|
/* Disable PLL, since phy_device has not yet been created
|
|
* provided for phy_[read,write]_mmd_indirect is called, we
|
|
* provide our own core_write_mmd_indirect to complete this
|
|
* function.
|
|
*/
|
|
core_write_mmd_indirect(priv,
|
|
CORE_GSWPLL_GRP1,
|
|
MDIO_MMD_VEND2,
|
|
0);
|
|
|
|
/* Set core clock into 500Mhz */
|
|
core_write(priv, CORE_GSWPLL_GRP2,
|
|
RG_GSWPLL_POSDIV_500M(1) |
|
|
RG_GSWPLL_FBKDIV_500M(25));
|
|
|
|
/* Enable PLL */
|
|
core_write(priv, CORE_GSWPLL_GRP1,
|
|
RG_GSWPLL_EN_PRE |
|
|
RG_GSWPLL_POSDIV_200M(2) |
|
|
RG_GSWPLL_FBKDIV_200M(32));
|
|
|
|
/* Enable MT7530 core clock */
|
|
core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
|
|
}
|
|
|
|
/* Setup the MT7530 TRGMII Tx Clock */
|
|
core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN);
|
|
core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1));
|
|
core_write(priv, CORE_PLL_GROUP6, RG_LCDDS_PCW_NCPO0(0));
|
|
core_write(priv, CORE_PLL_GROUP10, RG_LCDDS_SSC_DELTA(ssc_delta));
|
|
core_write(priv, CORE_PLL_GROUP11, RG_LCDDS_SSC_DELTA1(ssc_delta));
|
|
core_write(priv, CORE_PLL_GROUP4,
|
|
RG_SYSPLL_DDSFBK_EN | RG_SYSPLL_BIAS_EN |
|
|
RG_SYSPLL_BIAS_LPF_EN);
|
|
core_write(priv, CORE_PLL_GROUP2,
|
|
RG_SYSPLL_EN_NORMAL | RG_SYSPLL_VODEN |
|
|
RG_SYSPLL_POSDIV(1));
|
|
core_write(priv, CORE_PLL_GROUP7,
|
|
RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) |
|
|
RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
|
|
core_set(priv, CORE_TRGMII_GSW_CLK_CG,
|
|
REG_GSWCK_EN | REG_TRGMIICK_EN);
|
|
|
|
if (!trgint)
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
|
|
mt7530_rmw(priv, MT7530_TRGMII_RD(i),
|
|
RD_TAP_MASK, RD_TAP(16));
|
|
else
|
|
mt7623_trgmii_set(priv, GSW_INTF_MODE, INTF_MODE_TRGMII);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mt7623_pad_clk_setup(struct dsa_switch *ds)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
int i;
|
|
|
|
for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
|
|
mt7623_trgmii_write(priv, GSW_TRGMII_TD_ODT(i),
|
|
TD_DM_DRVP(8) | TD_DM_DRVN(8));
|
|
|
|
mt7623_trgmii_set(priv, GSW_TRGMII_RCK_CTRL, RX_RST | RXC_DQSISEL);
|
|
mt7623_trgmii_clear(priv, GSW_TRGMII_RCK_CTRL, RX_RST);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mt7530_mib_reset(struct dsa_switch *ds)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_FLUSH);
|
|
mt7530_write(priv, MT7530_MIB_CCR, CCR_MIB_ACTIVATE);
|
|
}
|
|
|
|
static void
|
|
mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable)
|
|
{
|
|
u32 mask = PMCR_TX_EN | PMCR_RX_EN;
|
|
|
|
if (enable)
|
|
mt7530_set(priv, MT7530_PMCR_P(port), mask);
|
|
else
|
|
mt7530_clear(priv, MT7530_PMCR_P(port), mask);
|
|
}
|
|
|
|
static int mt7530_phy_read(struct dsa_switch *ds, int port, int regnum)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
return mdiobus_read_nested(priv->bus, port, regnum);
|
|
}
|
|
|
|
static int mt7530_phy_write(struct dsa_switch *ds, int port, int regnum,
|
|
u16 val)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
return mdiobus_write_nested(priv->bus, port, regnum, val);
|
|
}
|
|
|
|
static void
|
|
mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
|
|
uint8_t *data)
|
|
{
|
|
int i;
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
return;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
|
|
strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
|
|
ETH_GSTRING_LEN);
|
|
}
|
|
|
|
static void
|
|
mt7530_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
uint64_t *data)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
const struct mt7530_mib_desc *mib;
|
|
u32 reg, i;
|
|
u64 hi;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) {
|
|
mib = &mt7530_mib[i];
|
|
reg = MT7530_PORT_MIB_COUNTER(port) + mib->offset;
|
|
|
|
data[i] = mt7530_read(priv, reg);
|
|
if (mib->size == 2) {
|
|
hi = mt7530_read(priv, reg + 4);
|
|
data[i] |= hi << 32;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
mt7530_get_sset_count(struct dsa_switch *ds, int port, int sset)
|
|
{
|
|
if (sset != ETH_SS_STATS)
|
|
return 0;
|
|
|
|
return ARRAY_SIZE(mt7530_mib);
|
|
}
|
|
|
|
static void mt7530_adjust_link(struct dsa_switch *ds, int port,
|
|
struct phy_device *phydev)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
if (phy_is_pseudo_fixed_link(phydev)) {
|
|
dev_dbg(priv->dev, "phy-mode for master device = %x\n",
|
|
phydev->interface);
|
|
|
|
/* Setup TX circuit incluing relevant PAD and driving */
|
|
mt7530_pad_clk_setup(ds, phydev->interface);
|
|
|
|
/* Setup RX circuit, relevant PAD and driving on the host
|
|
* which must be placed after the setup on the device side is
|
|
* all finished.
|
|
*/
|
|
mt7623_pad_clk_setup(ds);
|
|
} else {
|
|
u16 lcl_adv = 0, rmt_adv = 0;
|
|
u8 flowctrl;
|
|
u32 mcr = PMCR_USERP_LINK | PMCR_FORCE_MODE;
|
|
|
|
switch (phydev->speed) {
|
|
case SPEED_1000:
|
|
mcr |= PMCR_FORCE_SPEED_1000;
|
|
break;
|
|
case SPEED_100:
|
|
mcr |= PMCR_FORCE_SPEED_100;
|
|
break;
|
|
};
|
|
|
|
if (phydev->link)
|
|
mcr |= PMCR_FORCE_LNK;
|
|
|
|
if (phydev->duplex) {
|
|
mcr |= PMCR_FORCE_FDX;
|
|
|
|
if (phydev->pause)
|
|
rmt_adv = LPA_PAUSE_CAP;
|
|
if (phydev->asym_pause)
|
|
rmt_adv |= LPA_PAUSE_ASYM;
|
|
|
|
if (phydev->advertising & ADVERTISED_Pause)
|
|
lcl_adv |= ADVERTISE_PAUSE_CAP;
|
|
if (phydev->advertising & ADVERTISED_Asym_Pause)
|
|
lcl_adv |= ADVERTISE_PAUSE_ASYM;
|
|
|
|
flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv);
|
|
|
|
if (flowctrl & FLOW_CTRL_TX)
|
|
mcr |= PMCR_TX_FC_EN;
|
|
if (flowctrl & FLOW_CTRL_RX)
|
|
mcr |= PMCR_RX_FC_EN;
|
|
}
|
|
mt7530_write(priv, MT7530_PMCR_P(port), mcr);
|
|
}
|
|
}
|
|
|
|
static int
|
|
mt7530_cpu_port_enable(struct mt7530_priv *priv,
|
|
int port)
|
|
{
|
|
/* Enable Mediatek header mode on the cpu port */
|
|
mt7530_write(priv, MT7530_PVC_P(port),
|
|
PORT_SPEC_TAG);
|
|
|
|
/* Setup the MAC by default for the cpu port */
|
|
mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPUP_LINK);
|
|
|
|
/* Disable auto learning on the cpu port */
|
|
mt7530_set(priv, MT7530_PSC_P(port), SA_DIS);
|
|
|
|
/* Unknown unicast frame fordwarding to the cpu port */
|
|
mt7530_set(priv, MT7530_MFC, UNU_FFP(BIT(port)));
|
|
|
|
/* CPU port gets connected to all user ports of
|
|
* the switch
|
|
*/
|
|
mt7530_write(priv, MT7530_PCR_P(port),
|
|
PCR_MATRIX(dsa_user_ports(priv->ds)));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mt7530_port_enable(struct dsa_switch *ds, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
/* Setup the MAC for the user port */
|
|
mt7530_write(priv, MT7530_PMCR_P(port), PMCR_USERP_LINK);
|
|
|
|
/* Allow the user port gets connected to the cpu port and also
|
|
* restore the port matrix if the port is the member of a certain
|
|
* bridge.
|
|
*/
|
|
priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT));
|
|
priv->ports[port].enable = true;
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
priv->ports[port].pm);
|
|
mt7530_port_set_status(priv, port, 1);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mt7530_port_disable(struct dsa_switch *ds, int port,
|
|
struct phy_device *phy)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
/* Clear up all port matrix which could be restored in the next
|
|
* enablement for the port.
|
|
*/
|
|
priv->ports[port].enable = false;
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
PCR_MATRIX_CLR);
|
|
mt7530_port_set_status(priv, port, 0);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static void
|
|
mt7530_stp_state_set(struct dsa_switch *ds, int port, u8 state)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
u32 stp_state;
|
|
|
|
switch (state) {
|
|
case BR_STATE_DISABLED:
|
|
stp_state = MT7530_STP_DISABLED;
|
|
break;
|
|
case BR_STATE_BLOCKING:
|
|
stp_state = MT7530_STP_BLOCKING;
|
|
break;
|
|
case BR_STATE_LISTENING:
|
|
stp_state = MT7530_STP_LISTENING;
|
|
break;
|
|
case BR_STATE_LEARNING:
|
|
stp_state = MT7530_STP_LEARNING;
|
|
break;
|
|
case BR_STATE_FORWARDING:
|
|
default:
|
|
stp_state = MT7530_STP_FORWARDING;
|
|
break;
|
|
}
|
|
|
|
mt7530_rmw(priv, MT7530_SSP_P(port), FID_PST_MASK, stp_state);
|
|
}
|
|
|
|
static int
|
|
mt7530_port_bridge_join(struct dsa_switch *ds, int port,
|
|
struct net_device *bridge)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
u32 port_bitmap = BIT(MT7530_CPU_PORT);
|
|
int i;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
/* Add this port to the port matrix of the other ports in the
|
|
* same bridge. If the port is disabled, port matrix is kept
|
|
* and not being setup until the port becomes enabled.
|
|
*/
|
|
if (dsa_is_user_port(ds, i) && i != port) {
|
|
if (dsa_to_port(ds, i)->bridge_dev != bridge)
|
|
continue;
|
|
if (priv->ports[i].enable)
|
|
mt7530_set(priv, MT7530_PCR_P(i),
|
|
PCR_MATRIX(BIT(port)));
|
|
priv->ports[i].pm |= PCR_MATRIX(BIT(port));
|
|
|
|
port_bitmap |= BIT(i);
|
|
}
|
|
}
|
|
|
|
/* Add the all other ports to this port matrix. */
|
|
if (priv->ports[port].enable)
|
|
mt7530_rmw(priv, MT7530_PCR_P(port),
|
|
PCR_MATRIX_MASK, PCR_MATRIX(port_bitmap));
|
|
priv->ports[port].pm |= PCR_MATRIX(port_bitmap);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mt7530_port_set_vlan_unaware(struct dsa_switch *ds, int port)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
bool all_user_ports_removed = true;
|
|
int i;
|
|
|
|
/* When a port is removed from the bridge, the port would be set up
|
|
* back to the default as is at initial boot which is a VLAN-unaware
|
|
* port.
|
|
*/
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
MT7530_PORT_MATRIX_MODE);
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
|
|
VLAN_ATTR(MT7530_VLAN_TRANSPARENT));
|
|
|
|
priv->ports[port].vlan_filtering = false;
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
if (dsa_is_user_port(ds, i) &&
|
|
priv->ports[i].vlan_filtering) {
|
|
all_user_ports_removed = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* CPU port also does the same thing until all user ports belonging to
|
|
* the CPU port get out of VLAN filtering mode.
|
|
*/
|
|
if (all_user_ports_removed) {
|
|
mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT),
|
|
PCR_MATRIX(dsa_user_ports(priv->ds)));
|
|
mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT),
|
|
PORT_SPEC_TAG);
|
|
}
|
|
}
|
|
|
|
static void
|
|
mt7530_port_set_vlan_aware(struct dsa_switch *ds, int port)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
/* The real fabric path would be decided on the membership in the
|
|
* entry of VLAN table. PCR_MATRIX set up here with ALL_MEMBERS
|
|
* means potential VLAN can be consisting of certain subset of all
|
|
* ports.
|
|
*/
|
|
mt7530_rmw(priv, MT7530_PCR_P(port),
|
|
PCR_MATRIX_MASK, PCR_MATRIX(MT7530_ALL_MEMBERS));
|
|
|
|
/* Trapped into security mode allows packet forwarding through VLAN
|
|
* table lookup.
|
|
*/
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK,
|
|
MT7530_PORT_SECURITY_MODE);
|
|
|
|
/* Set the port as a user port which is to be able to recognize VID
|
|
* from incoming packets before fetching entry within the VLAN table.
|
|
*/
|
|
mt7530_rmw(priv, MT7530_PVC_P(port), VLAN_ATTR_MASK,
|
|
VLAN_ATTR(MT7530_VLAN_USER));
|
|
}
|
|
|
|
static void
|
|
mt7530_port_bridge_leave(struct dsa_switch *ds, int port,
|
|
struct net_device *bridge)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
int i;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
/* Remove this port from the port matrix of the other ports
|
|
* in the same bridge. If the port is disabled, port matrix
|
|
* is kept and not being setup until the port becomes enabled.
|
|
* And the other port's port matrix cannot be broken when the
|
|
* other port is still a VLAN-aware port.
|
|
*/
|
|
if (!priv->ports[i].vlan_filtering &&
|
|
dsa_is_user_port(ds, i) && i != port) {
|
|
if (dsa_to_port(ds, i)->bridge_dev != bridge)
|
|
continue;
|
|
if (priv->ports[i].enable)
|
|
mt7530_clear(priv, MT7530_PCR_P(i),
|
|
PCR_MATRIX(BIT(port)));
|
|
priv->ports[i].pm &= ~PCR_MATRIX(BIT(port));
|
|
}
|
|
}
|
|
|
|
/* Set the cpu port to be the only one in the port matrix of
|
|
* this port.
|
|
*/
|
|
if (priv->ports[port].enable)
|
|
mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK,
|
|
PCR_MATRIX(BIT(MT7530_CPU_PORT)));
|
|
priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT));
|
|
|
|
mt7530_port_set_vlan_unaware(ds, port);
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static int
|
|
mt7530_port_fdb_add(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
int ret;
|
|
u8 port_mask = BIT(port);
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_ENT);
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
mt7530_port_fdb_del(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
int ret;
|
|
u8 port_mask = BIT(port);
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
mt7530_fdb_write(priv, vid, port_mask, addr, -1, STATIC_EMP);
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_WRITE, NULL);
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
mt7530_port_fdb_dump(struct dsa_switch *ds, int port,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
struct mt7530_fdb _fdb = { 0 };
|
|
int cnt = MT7530_NUM_FDB_RECORDS;
|
|
int ret = 0;
|
|
u32 rsp = 0;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_START, &rsp);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
do {
|
|
if (rsp & ATC_SRCH_HIT) {
|
|
mt7530_fdb_read(priv, &_fdb);
|
|
if (_fdb.port_mask & BIT(port)) {
|
|
ret = cb(_fdb.mac, _fdb.vid, _fdb.noarp,
|
|
data);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
}
|
|
} while (--cnt &&
|
|
!(rsp & ATC_SRCH_END) &&
|
|
!mt7530_fdb_cmd(priv, MT7530_FDB_NEXT, &rsp));
|
|
err:
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mt7530_vlan_cmd(struct mt7530_priv *priv, enum mt7530_vlan_cmd cmd, u16 vid)
|
|
{
|
|
struct mt7530_dummy_poll p;
|
|
u32 val;
|
|
int ret;
|
|
|
|
val = VTCR_BUSY | VTCR_FUNC(cmd) | vid;
|
|
mt7530_write(priv, MT7530_VTCR, val);
|
|
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_VTCR);
|
|
ret = readx_poll_timeout(_mt7530_read, &p, val,
|
|
!(val & VTCR_BUSY), 20, 20000);
|
|
if (ret < 0) {
|
|
dev_err(priv->dev, "poll timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
val = mt7530_read(priv, MT7530_VTCR);
|
|
if (val & VTCR_INVALID) {
|
|
dev_err(priv->dev, "read VTCR invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mt7530_port_vlan_filtering(struct dsa_switch *ds, int port,
|
|
bool vlan_filtering)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
priv->ports[port].vlan_filtering = vlan_filtering;
|
|
|
|
if (vlan_filtering) {
|
|
/* The port is being kept as VLAN-unaware port when bridge is
|
|
* set up with vlan_filtering not being set, Otherwise, the
|
|
* port and the corresponding CPU port is required the setup
|
|
* for becoming a VLAN-aware port.
|
|
*/
|
|
mt7530_port_set_vlan_aware(ds, port);
|
|
mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mt7530_port_vlan_prepare(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
/* nothing needed */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mt7530_hw_vlan_add(struct mt7530_priv *priv,
|
|
struct mt7530_hw_vlan_entry *entry)
|
|
{
|
|
u8 new_members;
|
|
u32 val;
|
|
|
|
new_members = entry->old_members | BIT(entry->port) |
|
|
BIT(MT7530_CPU_PORT);
|
|
|
|
/* Validate the entry with independent learning, create egress tag per
|
|
* VLAN and joining the port as one of the port members.
|
|
*/
|
|
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | VLAN_VALID;
|
|
mt7530_write(priv, MT7530_VAWD1, val);
|
|
|
|
/* Decide whether adding tag or not for those outgoing packets from the
|
|
* port inside the VLAN.
|
|
*/
|
|
val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG :
|
|
MT7530_VLAN_EGRESS_TAG;
|
|
mt7530_rmw(priv, MT7530_VAWD2,
|
|
ETAG_CTRL_P_MASK(entry->port),
|
|
ETAG_CTRL_P(entry->port, val));
|
|
|
|
/* CPU port is always taken as a tagged port for serving more than one
|
|
* VLANs across and also being applied with egress type stack mode for
|
|
* that VLAN tags would be appended after hardware special tag used as
|
|
* DSA tag.
|
|
*/
|
|
mt7530_rmw(priv, MT7530_VAWD2,
|
|
ETAG_CTRL_P_MASK(MT7530_CPU_PORT),
|
|
ETAG_CTRL_P(MT7530_CPU_PORT,
|
|
MT7530_VLAN_EGRESS_STACK));
|
|
}
|
|
|
|
static void
|
|
mt7530_hw_vlan_del(struct mt7530_priv *priv,
|
|
struct mt7530_hw_vlan_entry *entry)
|
|
{
|
|
u8 new_members;
|
|
u32 val;
|
|
|
|
new_members = entry->old_members & ~BIT(entry->port);
|
|
|
|
val = mt7530_read(priv, MT7530_VAWD1);
|
|
if (!(val & VLAN_VALID)) {
|
|
dev_err(priv->dev,
|
|
"Cannot be deleted due to invalid entry\n");
|
|
return;
|
|
}
|
|
|
|
/* If certain member apart from CPU port is still alive in the VLAN,
|
|
* the entry would be kept valid. Otherwise, the entry is got to be
|
|
* disabled.
|
|
*/
|
|
if (new_members && new_members != BIT(MT7530_CPU_PORT)) {
|
|
val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) |
|
|
VLAN_VALID;
|
|
mt7530_write(priv, MT7530_VAWD1, val);
|
|
} else {
|
|
mt7530_write(priv, MT7530_VAWD1, 0);
|
|
mt7530_write(priv, MT7530_VAWD2, 0);
|
|
}
|
|
}
|
|
|
|
static void
|
|
mt7530_hw_vlan_update(struct mt7530_priv *priv, u16 vid,
|
|
struct mt7530_hw_vlan_entry *entry,
|
|
mt7530_vlan_op vlan_op)
|
|
{
|
|
u32 val;
|
|
|
|
/* Fetch entry */
|
|
mt7530_vlan_cmd(priv, MT7530_VTCR_RD_VID, vid);
|
|
|
|
val = mt7530_read(priv, MT7530_VAWD1);
|
|
|
|
entry->old_members = (val >> PORT_MEM_SHFT) & PORT_MEM_MASK;
|
|
|
|
/* Manipulate entry */
|
|
vlan_op(priv, entry);
|
|
|
|
/* Flush result to hardware */
|
|
mt7530_vlan_cmd(priv, MT7530_VTCR_WR_VID, vid);
|
|
}
|
|
|
|
static void
|
|
mt7530_port_vlan_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
|
|
bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID;
|
|
struct mt7530_hw_vlan_entry new_entry;
|
|
struct mt7530_priv *priv = ds->priv;
|
|
u16 vid;
|
|
|
|
/* The port is kept as VLAN-unaware if bridge with vlan_filtering not
|
|
* being set.
|
|
*/
|
|
if (!priv->ports[port].vlan_filtering)
|
|
return;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
|
|
mt7530_hw_vlan_entry_init(&new_entry, port, untagged);
|
|
mt7530_hw_vlan_update(priv, vid, &new_entry,
|
|
mt7530_hw_vlan_add);
|
|
}
|
|
|
|
if (pvid) {
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK,
|
|
G0_PORT_VID(vlan->vid_end));
|
|
priv->ports[port].pvid = vlan->vid_end;
|
|
}
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
}
|
|
|
|
static int
|
|
mt7530_port_vlan_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct mt7530_hw_vlan_entry target_entry;
|
|
struct mt7530_priv *priv = ds->priv;
|
|
u16 vid, pvid;
|
|
|
|
/* The port is kept as VLAN-unaware if bridge with vlan_filtering not
|
|
* being set.
|
|
*/
|
|
if (!priv->ports[port].vlan_filtering)
|
|
return 0;
|
|
|
|
mutex_lock(&priv->reg_mutex);
|
|
|
|
pvid = priv->ports[port].pvid;
|
|
for (vid = vlan->vid_begin; vid <= vlan->vid_end; ++vid) {
|
|
mt7530_hw_vlan_entry_init(&target_entry, port, 0);
|
|
mt7530_hw_vlan_update(priv, vid, &target_entry,
|
|
mt7530_hw_vlan_del);
|
|
|
|
/* PVID is being restored to the default whenever the PVID port
|
|
* is being removed from the VLAN.
|
|
*/
|
|
if (pvid == vid)
|
|
pvid = G0_PORT_VID_DEF;
|
|
}
|
|
|
|
mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, pvid);
|
|
priv->ports[port].pvid = pvid;
|
|
|
|
mutex_unlock(&priv->reg_mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dsa_tag_protocol
|
|
mtk_get_tag_protocol(struct dsa_switch *ds, int port)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
|
|
if (port != MT7530_CPU_PORT) {
|
|
dev_warn(priv->dev,
|
|
"port not matched with tagging CPU port\n");
|
|
return DSA_TAG_PROTO_NONE;
|
|
} else {
|
|
return DSA_TAG_PROTO_MTK;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mt7530_setup(struct dsa_switch *ds)
|
|
{
|
|
struct mt7530_priv *priv = ds->priv;
|
|
int ret, i;
|
|
u32 id, val;
|
|
struct device_node *dn;
|
|
struct mt7530_dummy_poll p;
|
|
|
|
/* The parent node of master netdev which holds the common system
|
|
* controller also is the container for two GMACs nodes representing
|
|
* as two netdev instances.
|
|
*/
|
|
dn = ds->ports[MT7530_CPU_PORT].master->dev.of_node->parent;
|
|
priv->ethernet = syscon_node_to_regmap(dn);
|
|
if (IS_ERR(priv->ethernet))
|
|
return PTR_ERR(priv->ethernet);
|
|
|
|
regulator_set_voltage(priv->core_pwr, 1000000, 1000000);
|
|
ret = regulator_enable(priv->core_pwr);
|
|
if (ret < 0) {
|
|
dev_err(priv->dev,
|
|
"Failed to enable core power: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
regulator_set_voltage(priv->io_pwr, 3300000, 3300000);
|
|
ret = regulator_enable(priv->io_pwr);
|
|
if (ret < 0) {
|
|
dev_err(priv->dev, "Failed to enable io pwr: %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Reset whole chip through gpio pin or memory-mapped registers for
|
|
* different type of hardware
|
|
*/
|
|
if (priv->mcm) {
|
|
reset_control_assert(priv->rstc);
|
|
usleep_range(1000, 1100);
|
|
reset_control_deassert(priv->rstc);
|
|
} else {
|
|
gpiod_set_value_cansleep(priv->reset, 0);
|
|
usleep_range(1000, 1100);
|
|
gpiod_set_value_cansleep(priv->reset, 1);
|
|
}
|
|
|
|
/* Waiting for MT7530 got to stable */
|
|
INIT_MT7530_DUMMY_POLL(&p, priv, MT7530_HWTRAP);
|
|
ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0,
|
|
20, 1000000);
|
|
if (ret < 0) {
|
|
dev_err(priv->dev, "reset timeout\n");
|
|
return ret;
|
|
}
|
|
|
|
id = mt7530_read(priv, MT7530_CREV);
|
|
id >>= CHIP_NAME_SHIFT;
|
|
if (id != MT7530_ID) {
|
|
dev_err(priv->dev, "chip %x can't be supported\n", id);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Reset the switch through internal reset */
|
|
mt7530_write(priv, MT7530_SYS_CTRL,
|
|
SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
|
|
SYS_CTRL_REG_RST);
|
|
|
|
/* Enable Port 6 only; P5 as GMAC5 which currently is not supported */
|
|
val = mt7530_read(priv, MT7530_MHWTRAP);
|
|
val &= ~MHWTRAP_P6_DIS & ~MHWTRAP_PHY_ACCESS;
|
|
val |= MHWTRAP_MANUAL;
|
|
mt7530_write(priv, MT7530_MHWTRAP, val);
|
|
|
|
/* Enable and reset MIB counters */
|
|
mt7530_mib_reset(ds);
|
|
|
|
mt7530_clear(priv, MT7530_MFC, UNU_FFP_MASK);
|
|
|
|
for (i = 0; i < MT7530_NUM_PORTS; i++) {
|
|
/* Disable forwarding by default on all ports */
|
|
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
|
|
PCR_MATRIX_CLR);
|
|
|
|
if (dsa_is_cpu_port(ds, i))
|
|
mt7530_cpu_port_enable(priv, i);
|
|
else
|
|
mt7530_port_disable(ds, i, NULL);
|
|
}
|
|
|
|
/* Flush the FDB table */
|
|
ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dsa_switch_ops mt7530_switch_ops = {
|
|
.get_tag_protocol = mtk_get_tag_protocol,
|
|
.setup = mt7530_setup,
|
|
.get_strings = mt7530_get_strings,
|
|
.phy_read = mt7530_phy_read,
|
|
.phy_write = mt7530_phy_write,
|
|
.get_ethtool_stats = mt7530_get_ethtool_stats,
|
|
.get_sset_count = mt7530_get_sset_count,
|
|
.adjust_link = mt7530_adjust_link,
|
|
.port_enable = mt7530_port_enable,
|
|
.port_disable = mt7530_port_disable,
|
|
.port_stp_state_set = mt7530_stp_state_set,
|
|
.port_bridge_join = mt7530_port_bridge_join,
|
|
.port_bridge_leave = mt7530_port_bridge_leave,
|
|
.port_fdb_add = mt7530_port_fdb_add,
|
|
.port_fdb_del = mt7530_port_fdb_del,
|
|
.port_fdb_dump = mt7530_port_fdb_dump,
|
|
.port_vlan_filtering = mt7530_port_vlan_filtering,
|
|
.port_vlan_prepare = mt7530_port_vlan_prepare,
|
|
.port_vlan_add = mt7530_port_vlan_add,
|
|
.port_vlan_del = mt7530_port_vlan_del,
|
|
};
|
|
|
|
static int
|
|
mt7530_probe(struct mdio_device *mdiodev)
|
|
{
|
|
struct mt7530_priv *priv;
|
|
struct device_node *dn;
|
|
|
|
dn = mdiodev->dev.of_node;
|
|
|
|
priv = devm_kzalloc(&mdiodev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->ds = dsa_switch_alloc(&mdiodev->dev, DSA_MAX_PORTS);
|
|
if (!priv->ds)
|
|
return -ENOMEM;
|
|
|
|
/* Use medatek,mcm property to distinguish hardware type that would
|
|
* casues a little bit differences on power-on sequence.
|
|
*/
|
|
priv->mcm = of_property_read_bool(dn, "mediatek,mcm");
|
|
if (priv->mcm) {
|
|
dev_info(&mdiodev->dev, "MT7530 adapts as multi-chip module\n");
|
|
|
|
priv->rstc = devm_reset_control_get(&mdiodev->dev, "mcm");
|
|
if (IS_ERR(priv->rstc)) {
|
|
dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
|
|
return PTR_ERR(priv->rstc);
|
|
}
|
|
}
|
|
|
|
priv->core_pwr = devm_regulator_get(&mdiodev->dev, "core");
|
|
if (IS_ERR(priv->core_pwr))
|
|
return PTR_ERR(priv->core_pwr);
|
|
|
|
priv->io_pwr = devm_regulator_get(&mdiodev->dev, "io");
|
|
if (IS_ERR(priv->io_pwr))
|
|
return PTR_ERR(priv->io_pwr);
|
|
|
|
/* Not MCM that indicates switch works as the remote standalone
|
|
* integrated circuit so the GPIO pin would be used to complete
|
|
* the reset, otherwise memory-mapped register accessing used
|
|
* through syscon provides in the case of MCM.
|
|
*/
|
|
if (!priv->mcm) {
|
|
priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset",
|
|
GPIOD_OUT_LOW);
|
|
if (IS_ERR(priv->reset)) {
|
|
dev_err(&mdiodev->dev, "Couldn't get our reset line\n");
|
|
return PTR_ERR(priv->reset);
|
|
}
|
|
}
|
|
|
|
priv->bus = mdiodev->bus;
|
|
priv->dev = &mdiodev->dev;
|
|
priv->ds->priv = priv;
|
|
priv->ds->ops = &mt7530_switch_ops;
|
|
mutex_init(&priv->reg_mutex);
|
|
dev_set_drvdata(&mdiodev->dev, priv);
|
|
|
|
return dsa_register_switch(priv->ds);
|
|
}
|
|
|
|
static void
|
|
mt7530_remove(struct mdio_device *mdiodev)
|
|
{
|
|
struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev);
|
|
int ret = 0;
|
|
|
|
ret = regulator_disable(priv->core_pwr);
|
|
if (ret < 0)
|
|
dev_err(priv->dev,
|
|
"Failed to disable core power: %d\n", ret);
|
|
|
|
ret = regulator_disable(priv->io_pwr);
|
|
if (ret < 0)
|
|
dev_err(priv->dev, "Failed to disable io pwr: %d\n",
|
|
ret);
|
|
|
|
dsa_unregister_switch(priv->ds);
|
|
mutex_destroy(&priv->reg_mutex);
|
|
}
|
|
|
|
static const struct of_device_id mt7530_of_match[] = {
|
|
{ .compatible = "mediatek,mt7530" },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mt7530_of_match);
|
|
|
|
static struct mdio_driver mt7530_mdio_driver = {
|
|
.probe = mt7530_probe,
|
|
.remove = mt7530_remove,
|
|
.mdiodrv.driver = {
|
|
.name = "mt7530",
|
|
.of_match_table = mt7530_of_match,
|
|
},
|
|
};
|
|
|
|
mdio_module_driver(mt7530_mdio_driver);
|
|
|
|
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
|
|
MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch");
|
|
MODULE_LICENSE("GPL");
|