OpenCloudOS-Kernel/drivers/firmware
Jason A. Donenfeld 16bdbae394 hwrng: core - treat default_quality as a maximum and default to 1024
Most hw_random devices return entropy which is assumed to be of full
quality, but driver authors don't bother setting the quality knob. Some
hw_random devices return less than full quality entropy, and then driver
authors set the quality knob. Therefore, the entropy crediting should be
opt-out rather than opt-in per-driver, to reflect the actual reality on
the ground.

For example, the two Raspberry Pi RNG drivers produce full entropy
randomness, and both EDK2 and U-Boot's drivers for these treat them as
such. The result is that EFI then uses these numbers and passes the to
Linux, and Linux credits them as boot, thereby initializing the RNG.
Yet, in Linux, the quality knob was never set to anything, and so on the
chance that Linux is booted without EFI, nothing is ever credited.
That's annoying.

The same pattern appears to repeat itself throughout various drivers. In
fact, very very few drivers have bothered setting quality=1024.

Looking at the git history of existing drivers and corresponding mailing
list discussion, this conclusion tracks. There's been a decent amount of
discussion about drivers that set quality < 1024 -- somebody read and
interepreted a datasheet, or made some back of the envelope calculation
somehow. But there's been very little, if any, discussion about most
drivers where the quality is just set to 1024 or unset (or set to 1000
when the authors misunderstood the API and assumed it was base-10 rather
than base-2); in both cases the intent was fairly clear of, "this is a
hardware random device; it's fine."

So let's invert this logic. A hw_random struct's quality knob now
controls the maximum quality a driver can produce, or 0 to specify 1024.
Then, the module-wide switch called "default_quality" is changed to
represent the maximum quality of any driver. By default it's 1024, and
the quality of any particular driver is then given by:

    min(default_quality, rng->quality ?: 1024);

This way, the user can still turn this off for weird reasons (and we can
replace whatever driver-specific disabling hacks existed in the past),
yet we get proper crediting for relevant RNGs.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18 16:59:34 +08:00
..
arm_ffa firmware: arm_ffa: Split up ffa_ops into info, message and memory operations 2022-09-08 11:34:04 +01:00
arm_scmi MMC core: 2022-09-28 11:36:31 -07:00
broadcom firmware: tee_bnxt: Use UUID API for exporting the UUID 2022-05-05 18:14:29 -07:00
cirrus firmware: cs_dsp: Add memory chunk helpers 2022-07-22 13:40:00 +01:00
efi - Yu Zhao's Multi-Gen LRU patches are here. They've been under test in 2022-10-10 17:53:04 -07:00
google firmware: google: Test spinlock on panic path to avoid lockups 2022-09-24 14:59:44 +02:00
imx firmware: imx: scu-pd: imx8q: add vpu mu resources 2022-02-20 14:55:32 +08:00
meson
psci ARM: driver updates for 6.1 2022-10-06 11:04:57 -07:00
smccc printk: stop including cache.h from printk.h 2022-05-13 07:20:07 -07:00
tegra firmware: tegra: Switch over to memdup_user() 2022-09-15 12:45:42 +02:00
xilinx firmware: xilinx: add support for sd/gem config 2022-09-20 08:33:04 -07:00
Kconfig sound updates for 5.19-rc1 2022-05-25 16:55:16 -07:00
Makefile Follow-up tweaks for the EFI changes in v5.19 2022-06-03 13:39:30 -07:00
arm_scpi.c firmware: arm_scpi: Ensure scpi_info is not assigned if the probe fails 2022-07-04 14:28:42 +01:00
arm_sdei.c ACPI: APEI: explicit init of HEST and GHES in apci_init() 2022-03-03 20:24:22 +01:00
dmi-id.c firmware: dmi: Move product_sku info to the end of the modalias 2021-09-02 17:28:53 +02:00
dmi-sysfs.c firmware: dmi-sysfs: Fix memory leak in dmi_sysfs_register_handle 2022-05-19 18:56:56 +02:00
dmi_scan.c firmware: dmi: Fortify entry point length checks 2022-09-23 14:53:14 +02:00
edd.c edd: simplify the check of 'attr->test' in edd_populate_dir() 2022-05-19 18:57:04 +02:00
iscsi_ibft.c iscsi_ibft: Fix isa_bus_to_virt not working under ARM 2021-09-02 16:22:00 -04:00
iscsi_ibft_find.c iscsi_ibft: fix warning in reserve_ibft_region() 2021-08-05 19:47:57 -04:00
memmap.c firmware: memmap: use default_groups in kobj_type 2022-01-05 19:17:29 +01:00
mtk-adsp-ipc.c firmware: mediatek: Use meaningful names for mbox 2022-06-22 13:39:30 +01:00
pcdp.c
pcdp.h
qcom_scm-legacy.c firmware: qcom_scm-legacy: correct kerneldoc 2022-06-25 22:04:31 -05:00
qcom_scm-smc.c firmware: qcom_scm: Reduce locking section for __get_convention() 2021-04-06 21:25:23 -05:00
qcom_scm.c firmware: qcom_scm: Add bw voting support to the SCM interface 2022-06-29 21:48:32 -05:00
qcom_scm.h firmware: qcom: scm: remove unused __qcom_scm_init declaration 2022-09-13 15:14:54 -05:00
qemu_fw_cfg.c firmware: qemu_fw_cfg: remove sysfs entries explicitly 2022-01-14 18:50:52 -05:00
raspberrypi.c firmware: raspberrypi: Fix a leak in 'rpi_firmware_get()' 2021-08-18 16:02:08 +02:00
scpi_pm_domain.c firmware: arm_scpi: Fix string overflow in SCPI genpd driver 2021-12-13 15:17:37 +01:00
stratix10-rsu.c firmware: stratix10-rsu: extend RSU driver to get DCMF status 2022-07-14 16:55:09 +02:00
stratix10-svc.c firmware: stratix10-svc: To support a command ATF Get Version 2022-07-14 16:55:09 +02:00
sysfb.c fbdev/vga16fb: Create EGA/VGA devices in sysfb code 2022-07-19 13:19:11 +02:00
sysfb_simplefb.c firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer 2022-06-29 09:51:31 +02:00
ti_sci.c firmware: ti_sci: Switch transport to polled mode during system suspend 2022-05-03 06:52:11 -05:00
ti_sci.h
trusted_foundations.c
turris-mox-rwtm.c hwrng: core - treat default_quality as a maximum and default to 1024 2022-11-18 16:59:34 +08:00