..
include /mach
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
2009-06-11 22:20:22 +08:00
Kconfig
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
2009-06-11 22:20:22 +08:00
Makefile
[ARM] pxa: Stargate 2 board support
2009-06-05 10:46:17 +08:00
Makefile.boot
Linux-2.6.12-rc2
2005-04-16 15:20:36 -07:00
am200epd.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
am300epd.c
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
2009-02-10 11:28:00 +00:00
clock.c
[ARM] pxa: make second argument of clk_add_alias a name instead of the device
2009-03-19 16:20:39 +08:00
clock.h
[ARM] pxa: make second argument of clk_add_alias a name instead of the device
2009-03-19 16:20:39 +08:00
cm-x2xx-pci.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
cm-x2xx-pci.h
[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
2008-10-07 12:05:05 +01:00
cm-x2xx.c
[ARM] pxa/cm-x2xx: fix ucb1400 not being registered
2009-04-04 10:26:34 +08:00
cm-x255.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
cm-x270.c
[ARM] pxa/em-x270, cm-x270: use DEEPSLEEP for PM_SUSPEND_MEM
2009-06-05 10:50:25 +08:00
cm-x300.c
[ARM] pxa/cm-x300: add .fixup method to enable second DRAM bank
2009-06-05 10:50:27 +08:00
colibri-pxa3xx.c
[ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
2009-04-04 10:26:34 +08:00
colibri-pxa270.c
[ARM] pxa: rename colibri.c to colibri-pxa270.c
2009-03-23 09:57:54 +08:00
colibri-pxa300.c
[ARM] pxa/colibri: get rid of set_irq_type()
2009-04-04 10:26:34 +08:00
colibri-pxa320.c
[ARM] pxa/colibri: get rid of set_irq_type()
2009-04-04 10:26:34 +08:00
corgi.c
[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
2009-06-05 10:32:06 +08:00
corgi_lcd.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
corgi_pm.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
corgi_ssp.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
cpufreq-pxa2xx.c
[ARM] pxa: add vcc_core regulation for cpufreq on pxa2xx
2009-06-05 10:33:07 +08:00
cpufreq-pxa3xx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
csb701.c
[ARM] pxa/csb701: do not register devices on non-csb726 boads
2009-04-04 10:26:35 +08:00
csb726.c
[ARM] pxa/csb726: register ac97 controller
2009-06-05 10:41:23 +08:00
devices.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
devices.h
[ARM] pxa: add resources for incoming rtc-pxa driver
2008-12-02 14:43:47 +08:00
e330.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e350.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e400.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
e740.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
e750.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
e800.c
[ARM] pxa: register AC97 controller devices
2009-04-04 21:54:40 +08:00
em-x270.c
[ARM] pxa/em-x270, cm-x270: use DEEPSLEEP for PM_SUSPEND_MEM
2009-06-05 10:50:25 +08:00
eseries.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
eseries.h
[ARM] pxa: Add multi-io support for e-series
2008-12-15 03:29:34 +00:00
ezx.c
[ARM] pxa/ezx: setup gpio-keys for EzX phones
2009-06-05 10:50:22 +08:00
generic.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
generic.h
[ARM] pxa: add missing declaration of pxa26x_init_irq()
2009-04-13 12:10:36 +08:00
gumstix.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
h5000.c
Merge branch 'origin' into devel
2009-03-28 20:29:51 +00:00
himalaya.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
hx4700.c
[ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
2009-06-11 22:12:13 +08:00
idp.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
imote2.c
[ARM] pxa/imote2: add i2c board info for the wm8940 audio codec
2009-06-05 10:46:56 +08:00
irq.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
leds-idp.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-lubbock.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds-mainstone.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
leds.c
[ARM] 5251/1: remove old LED support for Trizeps4 SOM
2008-10-01 22:34:34 +01:00
leds.h
fix file specification in comments
2006-10-03 23:01:26 +02:00
littleton.c
[ARM] pxa/littleton: add support for the Micro-SD slot (MMC1)
2009-06-05 16:49:26 +08:00
lpd270.c
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
2009-03-09 21:22:37 +08:00
lubbock.c
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
2009-03-09 21:22:40 +08:00
magician.c
[ARM] pxa/magician: use ARRAY_AND_SIZE for platform_add_devices
2009-06-05 10:39:39 +08:00
mainstone.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
mfp-pxa2xx.c
[ARM] pxa: enable GPIO receivers after configuring pins
2009-05-18 21:52:09 +08:00
mfp-pxa3xx.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
mioa701.c
[ARM] pxa: fix the conflicting non-static declarations of global_gpios[]
2009-06-11 22:12:13 +08:00
mioa701_bootresume.S
[ARM] pxa/MioA701: fix memory corruption.
2008-11-22 20:57:21 +08:00
mp900.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
palmld.c
[ARM] pxa/palm: Palm TX, T5, LD suspend-to-mem rework
2009-06-05 10:43:29 +08:00
palmt5.c
[ARM] pxa/palm: Palm TX, T5, LD suspend-to-mem rework
2009-06-05 10:43:29 +08:00
palmte2.c
[ARM] pxa/palm: Add Palm27x aSoC driver to PalmTE2
2009-06-05 10:41:54 +08:00
palmtx.c
[ARM] pxa/palm: Palm TX, T5, LD suspend-to-mem rework
2009-06-05 10:43:29 +08:00
palmz72.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pcm027.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pcm990-baseboard.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
pm.c
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
2009-03-09 21:22:40 +08:00
poodle.c
[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
2009-06-05 10:32:06 +08:00
pxa2xx.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
pxa3xx.c
[ARM] pxa: add udc support for pxa3xx
2009-06-05 10:32:34 +08:00
pxa25x.c
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
2009-03-09 21:22:37 +08:00
pxa27x.c
[ARM] pxa: add ability to set suspend mode
2009-06-05 10:32:48 +08:00
pxa300.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
pxa320.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
pxa930.c
[ARM] pxa: move common MFP handling code into plat-pxa
2009-03-23 10:11:34 +08:00
reset.c
[ARM] pxa: allow gpio_reset drive high during normal work
2009-05-18 21:52:09 +08:00
saar.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
sharpsl.h
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
2009-06-11 22:20:22 +08:00
sharpsl_pm.c
[ARM] pxa/sharpsl_pm: merge the two sharpsl_pm.c since it's now pxa specific
2009-06-11 22:20:22 +08:00
sleep.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
smemc.c
[ARM] pxa: avoid polluting the kernel's namespace
2008-11-28 16:04:54 +00:00
spitz.c
[ARM] pxa/spitz: drop unused header files from spitz.c
2009-06-05 10:49:45 +08:00
spitz_pm.c
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
ssp.c
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
2009-03-09 21:22:38 +08:00
standby.S
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
2009-03-09 21:22:40 +08:00
stargate2.c
[ARM] pxa: Stargate 2 board support
2009-06-05 10:46:17 +08:00
tavorevb.c
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
2009-03-09 21:22:36 +08:00
time.c
clocksource: pass clocksource to read() callback
2009-04-21 13:41:47 -07:00
tosa-bt.c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
2008-08-07 09:55:48 +01:00
tosa.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
trizeps4.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
viper.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
zylonite.c
[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>
2008-12-02 14:42:37 +08:00
zylonite_pxa300.c
[ARM] pxa: move mach/i2c.h to plat/i2c.h
2009-06-05 10:32:01 +08:00
zylonite_pxa320.c
[ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working
2009-04-27 11:46:30 +08:00