51 lines
1.8 KiB
Plaintext
51 lines
1.8 KiB
Plaintext
SLIM(Serial Low Power Interchip Media Bus) bus
|
|
|
|
SLIMbus is a 2-wire bus, and is used to communicate with peripheral
|
|
components like audio-codec.
|
|
|
|
Required property for SLIMbus controller node:
|
|
- compatible - name of SLIMbus controller
|
|
|
|
Child nodes:
|
|
Every SLIMbus controller node can contain zero or more child nodes
|
|
representing slave devices on the bus. Every SLIMbus slave device is
|
|
uniquely determined by the enumeration address containing 4 fields:
|
|
Manufacturer ID, Product code, Device index, and Instance value for
|
|
the device.
|
|
If child node is not present and it is instantiated after device
|
|
discovery (slave device reporting itself present).
|
|
|
|
In some cases it may be necessary to describe non-probeable device
|
|
details such as non-standard ways of powering up a device. In
|
|
such cases, child nodes for those devices will be present as
|
|
slaves of the SLIMbus controller, as detailed below.
|
|
|
|
Required property for SLIMbus child node if it is present:
|
|
- reg - Should be ('Device index', 'Instance ID') from SLIMbus
|
|
Enumeration Address.
|
|
Device Index Uniquely identifies multiple Devices within
|
|
a single Component.
|
|
Instance ID Is for the cases where multiple Devices of the
|
|
same type or Class are attached to the bus.
|
|
|
|
- compatible -"slimMID,PID". The textual representation of Manufacturer ID,
|
|
Product Code, shall be in lower case hexadecimal with leading
|
|
zeroes suppressed
|
|
|
|
SLIMbus example for Qualcomm's slimbus manager component:
|
|
|
|
slim@28080000 {
|
|
compatible = "qcom,apq8064-slim", "qcom,slim";
|
|
reg = <0x28080000 0x2000>,
|
|
interrupts = <0 33 0>;
|
|
clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
|
|
clock-names = "iface", "core";
|
|
#address-cells = <2>;
|
|
#size-cell = <0>;
|
|
|
|
codec: wcd9310@1,0{
|
|
compatible = "slim217,60";
|
|
reg = <1 0>;
|
|
};
|
|
};
|