286 lines
7.5 KiB
C
286 lines
7.5 KiB
C
/*
|
|
* Copyright (c) 2006-2008 Simtec Electronics
|
|
* http://armlinux.simtec.co.uk/
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
*
|
|
* S3C2412/S3C2443 (PL093 based) IO timing support
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/amba/pl093.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
|
|
#include <plat/cpu.h>
|
|
#include <plat/cpu-freq-core.h>
|
|
#include <plat/clock.h>
|
|
|
|
#include <mach/s3c2412.h>
|
|
|
|
#define print_ns(x) ((x) / 10), ((x) % 10)
|
|
|
|
/**
|
|
* s3c2412_print_timing - print timing infromation via printk.
|
|
* @pfx: The prefix to print each line with.
|
|
* @iot: The IO timing information
|
|
*/
|
|
static void s3c2412_print_timing(const char *pfx, struct s3c_iotimings *iot)
|
|
{
|
|
struct s3c2412_iobank_timing *bt;
|
|
unsigned int bank;
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
bt = iot->bank[bank].io_2412;
|
|
if (!bt)
|
|
continue;
|
|
|
|
printk(KERN_DEBUG "%s: %d: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
|
|
"wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n", pfx, bank,
|
|
print_ns(bt->idcy),
|
|
print_ns(bt->wstrd),
|
|
print_ns(bt->wstwr),
|
|
print_ns(bt->wstoen),
|
|
print_ns(bt->wstwen),
|
|
print_ns(bt->wstbrd));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* to_div - turn a cycle length into a divisor setting.
|
|
* @cyc_tns: The cycle time in 10ths of nanoseconds.
|
|
* @clk_tns: The clock period in 10ths of nanoseconds.
|
|
*/
|
|
static inline unsigned int to_div(unsigned int cyc_tns, unsigned int clk_tns)
|
|
{
|
|
return cyc_tns ? DIV_ROUND_UP(cyc_tns, clk_tns) : 0;
|
|
}
|
|
|
|
/**
|
|
* calc_timing - calculate timing divisor value and check in range.
|
|
* @hwtm: The hardware timing in 10ths of nanoseconds.
|
|
* @clk_tns: The clock period in 10ths of nanoseconds.
|
|
* @err: Pointer to err variable to update in event of failure.
|
|
*/
|
|
static unsigned int calc_timing(unsigned int hwtm, unsigned int clk_tns,
|
|
unsigned int *err)
|
|
{
|
|
unsigned int ret = to_div(hwtm, clk_tns);
|
|
|
|
if (ret > 0xf)
|
|
*err = -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* s3c2412_calc_bank - calculate the bank divisor settings.
|
|
* @cfg: The current frequency configuration.
|
|
* @bt: The bank timing.
|
|
*/
|
|
static int s3c2412_calc_bank(struct s3c_cpufreq_config *cfg,
|
|
struct s3c2412_iobank_timing *bt)
|
|
{
|
|
unsigned int hclk = cfg->freq.hclk_tns;
|
|
int err = 0;
|
|
|
|
bt->smbidcyr = calc_timing(bt->idcy, hclk, &err);
|
|
bt->smbwstrd = calc_timing(bt->wstrd, hclk, &err);
|
|
bt->smbwstwr = calc_timing(bt->wstwr, hclk, &err);
|
|
bt->smbwstoen = calc_timing(bt->wstoen, hclk, &err);
|
|
bt->smbwstwen = calc_timing(bt->wstwen, hclk, &err);
|
|
bt->smbwstbrd = calc_timing(bt->wstbrd, hclk, &err);
|
|
|
|
return err;
|
|
}
|
|
|
|
/**
|
|
* s3c2412_iotiming_debugfs - debugfs show io bank timing information
|
|
* @seq: The seq_file to write output to using seq_printf().
|
|
* @cfg: The current configuration.
|
|
* @iob: The IO bank information to decode.
|
|
*/
|
|
void s3c2412_iotiming_debugfs(struct seq_file *seq,
|
|
struct s3c_cpufreq_config *cfg,
|
|
union s3c_iobank *iob)
|
|
{
|
|
struct s3c2412_iobank_timing *bt = iob->io_2412;
|
|
|
|
seq_printf(seq,
|
|
"\tRead: idcy=%d.%d wstrd=%d.%d wstwr=%d,%d"
|
|
"wstoen=%d.%d wstwen=%d.%d wstbrd=%d.%d\n",
|
|
print_ns(bt->idcy),
|
|
print_ns(bt->wstrd),
|
|
print_ns(bt->wstwr),
|
|
print_ns(bt->wstoen),
|
|
print_ns(bt->wstwen),
|
|
print_ns(bt->wstbrd));
|
|
}
|
|
|
|
/**
|
|
* s3c2412_iotiming_calc - calculate all the bank divisor settings.
|
|
* @cfg: The current frequency configuration.
|
|
* @iot: The bank timing information.
|
|
*
|
|
* Calculate the timing information for all the banks that are
|
|
* configured as IO, using s3c2412_calc_bank().
|
|
*/
|
|
int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg,
|
|
struct s3c_iotimings *iot)
|
|
{
|
|
struct s3c2412_iobank_timing *bt;
|
|
int bank;
|
|
int ret;
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
bt = iot->bank[bank].io_2412;
|
|
if (!bt)
|
|
continue;
|
|
|
|
ret = s3c2412_calc_bank(cfg, bt);
|
|
if (ret) {
|
|
printk(KERN_ERR "%s: cannot calculate bank %d io\n",
|
|
__func__, bank);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* s3c2412_iotiming_set - set the timing information
|
|
* @cfg: The current frequency configuration.
|
|
* @iot: The bank timing information.
|
|
*
|
|
* Set the IO bank information from the details calculated earlier from
|
|
* calling s3c2412_iotiming_calc().
|
|
*/
|
|
void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg,
|
|
struct s3c_iotimings *iot)
|
|
{
|
|
struct s3c2412_iobank_timing *bt;
|
|
void __iomem *regs;
|
|
int bank;
|
|
|
|
/* set the io timings from the specifier */
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
bt = iot->bank[bank].io_2412;
|
|
if (!bt)
|
|
continue;
|
|
|
|
regs = S3C2412_SSMC_BANK(bank);
|
|
|
|
__raw_writel(bt->smbidcyr, regs + SMBIDCYR);
|
|
__raw_writel(bt->smbwstrd, regs + SMBWSTRDR);
|
|
__raw_writel(bt->smbwstwr, regs + SMBWSTWRR);
|
|
__raw_writel(bt->smbwstoen, regs + SMBWSTOENR);
|
|
__raw_writel(bt->smbwstwen, regs + SMBWSTWENR);
|
|
__raw_writel(bt->smbwstbrd, regs + SMBWSTBRDR);
|
|
}
|
|
}
|
|
|
|
static inline unsigned int s3c2412_decode_timing(unsigned int clock, u32 reg)
|
|
{
|
|
return (reg & 0xf) * clock;
|
|
}
|
|
|
|
static void s3c2412_iotiming_getbank(struct s3c_cpufreq_config *cfg,
|
|
struct s3c2412_iobank_timing *bt,
|
|
unsigned int bank)
|
|
{
|
|
unsigned long clk = cfg->freq.hclk_tns; /* ssmc clock??? */
|
|
void __iomem *regs = S3C2412_SSMC_BANK(bank);
|
|
|
|
bt->idcy = s3c2412_decode_timing(clk, __raw_readl(regs + SMBIDCYR));
|
|
bt->wstrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTRDR));
|
|
bt->wstoen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTOENR));
|
|
bt->wstwen = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTWENR));
|
|
bt->wstbrd = s3c2412_decode_timing(clk, __raw_readl(regs + SMBWSTBRDR));
|
|
}
|
|
|
|
/**
|
|
* bank_is_io - return true if bank is (possibly) IO.
|
|
* @bank: The bank number.
|
|
* @bankcfg: The value of S3C2412_EBI_BANKCFG.
|
|
*/
|
|
static inline bool bank_is_io(unsigned int bank, u32 bankcfg)
|
|
{
|
|
if (bank < 2)
|
|
return true;
|
|
|
|
return !(bankcfg & (1 << bank));
|
|
}
|
|
|
|
int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg,
|
|
struct s3c_iotimings *timings)
|
|
{
|
|
struct s3c2412_iobank_timing *bt;
|
|
u32 bankcfg = __raw_readl(S3C2412_EBI_BANKCFG);
|
|
unsigned int bank;
|
|
|
|
/* look through all banks to see what is currently set. */
|
|
|
|
for (bank = 0; bank < MAX_BANKS; bank++) {
|
|
if (!bank_is_io(bank, bankcfg))
|
|
continue;
|
|
|
|
bt = kzalloc(sizeof(struct s3c2412_iobank_timing), GFP_KERNEL);
|
|
if (!bt) {
|
|
printk(KERN_ERR "%s: no memory for bank\n", __func__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
timings->bank[bank].io_2412 = bt;
|
|
s3c2412_iotiming_getbank(cfg, bt, bank);
|
|
}
|
|
|
|
s3c2412_print_timing("get", timings);
|
|
return 0;
|
|
}
|
|
|
|
/* this is in here as it is so small, it doesn't currently warrant a file
|
|
* to itself. We expect that any s3c24xx needing this is going to also
|
|
* need the iotiming support.
|
|
*/
|
|
void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
|
|
{
|
|
struct s3c_cpufreq_board *board = cfg->board;
|
|
u32 refresh;
|
|
|
|
WARN_ON(board == NULL);
|
|
|
|
/* Reduce both the refresh time (in ns) and the frequency (in MHz)
|
|
* down to ensure that we do not overflow 32 bit numbers.
|
|
*
|
|
* This should work for HCLK up to 133MHz and refresh period up
|
|
* to 30usec.
|
|
*/
|
|
|
|
refresh = (cfg->freq.hclk / 100) * (board->refresh / 10);
|
|
refresh = DIV_ROUND_UP(refresh, (1000 * 1000)); /* apply scale */
|
|
refresh &= ((1 << 16) - 1);
|
|
|
|
s3c_freq_dbg("%s: refresh value %u\n", __func__, (unsigned int)refresh);
|
|
|
|
__raw_writel(refresh, S3C2412_REFRESH);
|
|
}
|