63 lines
2.2 KiB
Plaintext
63 lines
2.2 KiB
Plaintext
Texas Instruments System Control Interface (TI-SCI) Reset Controller
|
|
=====================================================================
|
|
|
|
Some TI SoCs contain a system controller (like the Power Management Micro
|
|
Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
|
|
the state of the various hardware modules present on the SoC. Communication
|
|
between the host processor running an OS and the system controller happens
|
|
through a protocol called TI System Control Interface (TI-SCI protocol).
|
|
For TI SCI details, please refer to the document,
|
|
Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
|
|
|
|
TI-SCI Reset Controller Node
|
|
============================
|
|
This reset controller node uses the TI SCI protocol to perform the reset
|
|
management of various hardware modules present on the SoC. Must be a child
|
|
node of the associated TI-SCI system controller node.
|
|
|
|
Required properties:
|
|
--------------------
|
|
- compatible : Should be "ti,sci-reset"
|
|
- #reset-cells : Should be 2. Please see the reset consumer node below for
|
|
usage details.
|
|
|
|
TI-SCI Reset Consumer Nodes
|
|
===========================
|
|
Each of the reset consumer nodes should have the following properties,
|
|
in addition to their own properties.
|
|
|
|
Required properties:
|
|
--------------------
|
|
- resets : A phandle and reset specifier pair, one pair for each reset
|
|
signal that affects the device, or that the device manages.
|
|
The phandle should point to the TI-SCI reset controller node,
|
|
and the reset specifier should have 2 cell-values. The first
|
|
cell should contain the device ID. The second cell should
|
|
contain the reset mask value used by system controller.
|
|
Please refer to the protocol documentation for these values
|
|
to be used for different devices,
|
|
http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
|
|
|
|
Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
|
|
common reset controller usage by consumers.
|
|
|
|
Example:
|
|
--------
|
|
The following example demonstrates both a TI-SCI reset controller node and a
|
|
consumer (a DSP device) on the 66AK2G SoC.
|
|
|
|
pmmc: pmmc {
|
|
compatible = "ti,k2g-sci";
|
|
|
|
k2g_reset: reset-controller {
|
|
compatible = "ti,sci-reset";
|
|
#reset-cells = <2>;
|
|
};
|
|
};
|
|
|
|
dsp0: dsp@10800000 {
|
|
...
|
|
resets = <&k2g_reset 0x0046 0x1>;
|
|
...
|
|
};
|