36 lines
1.1 KiB
Plaintext
36 lines
1.1 KiB
Plaintext
* Amlogic Meson AO-CEC driver
|
|
|
|
The Amlogic Meson AO-CEC module is present is Amlogic SoCs and its purpose is
|
|
to handle communication between HDMI connected devices over the CEC bus.
|
|
|
|
Required properties:
|
|
- compatible : value should be following depending on the SoC :
|
|
For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
|
|
"amlogic,meson-gx-ao-cec"
|
|
For G12A (AO_CEC_B module) :
|
|
"amlogic,meson-g12a-ao-cec"
|
|
|
|
- reg : Physical base address of the IP registers and length of memory
|
|
mapped region.
|
|
|
|
- interrupts : AO-CEC interrupt number to the CPU.
|
|
- clocks : from common clock binding: handle to AO-CEC clock.
|
|
- clock-names : from common clock binding, must contain :
|
|
For GXBB, GXL, GXM and G12A (AO_CEC_A module) :
|
|
- "core"
|
|
For G12A (AO_CEC_B module) :
|
|
- "oscin"
|
|
corresponding to entry in the clocks property.
|
|
- hdmi-phandle: phandle to the HDMI controller
|
|
|
|
Example:
|
|
|
|
cec_AO: cec@100 {
|
|
compatible = "amlogic,meson-gx-ao-cec";
|
|
reg = <0x0 0x00100 0x0 0x14>;
|
|
interrupts = <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&clkc_AO CLKID_AO_CEC_32K>;
|
|
clock-names = "core";
|
|
hdmi-phandle = <&hdmi_tx>;
|
|
};
|