471 lines
12 KiB
YAML
471 lines
12 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/arm/cpus.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: ARM CPUs bindings
|
|
|
|
maintainers:
|
|
- Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
|
|
|
|
description: |+
|
|
The device tree allows to describe the layout of CPUs in a system through
|
|
the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
|
|
defining properties for every cpu.
|
|
|
|
Bindings for CPU nodes follow the Devicetree Specification, available from:
|
|
|
|
https://www.devicetree.org/specifications/
|
|
|
|
with updates for 32-bit and 64-bit ARM systems provided in this document.
|
|
|
|
================================
|
|
Convention used in this document
|
|
================================
|
|
|
|
This document follows the conventions described in the Devicetree
|
|
Specification, with the addition:
|
|
|
|
- square brackets define bitfields, eg reg[7:0] value of the bitfield in
|
|
the reg property contained in bits 7 down to 0
|
|
|
|
=====================================
|
|
cpus and cpu node bindings definition
|
|
=====================================
|
|
|
|
The ARM architecture, in accordance with the Devicetree Specification,
|
|
requires the cpus and cpu nodes to be present and contain the properties
|
|
described below.
|
|
|
|
properties:
|
|
reg:
|
|
maxItems: 1
|
|
description: |
|
|
Usage and definition depend on ARM architecture version and
|
|
configuration:
|
|
|
|
On uniprocessor ARM architectures previous to v7
|
|
this property is required and must be set to 0.
|
|
|
|
On ARM 11 MPcore based systems this property is
|
|
required and matches the CPUID[11:0] register bits.
|
|
|
|
Bits [11:0] in the reg cell must be set to
|
|
bits [11:0] in CPU ID register.
|
|
|
|
All other bits in the reg cell must be set to 0.
|
|
|
|
On 32-bit ARM v7 or later systems this property is
|
|
required and matches the CPU MPIDR[23:0] register
|
|
bits.
|
|
|
|
Bits [23:0] in the reg cell must be set to
|
|
bits [23:0] in MPIDR.
|
|
|
|
All other bits in the reg cell must be set to 0.
|
|
|
|
On ARM v8 64-bit systems this property is required
|
|
and matches the MPIDR_EL1 register affinity bits.
|
|
|
|
* If cpus node's #address-cells property is set to 2
|
|
|
|
The first reg cell bits [7:0] must be set to
|
|
bits [39:32] of MPIDR_EL1.
|
|
|
|
The second reg cell bits [23:0] must be set to
|
|
bits [23:0] of MPIDR_EL1.
|
|
|
|
* If cpus node's #address-cells property is set to 1
|
|
|
|
The reg cell bits [23:0] must be set to bits [23:0]
|
|
of MPIDR_EL1.
|
|
|
|
All other bits in the reg cells must be set to 0.
|
|
|
|
compatible:
|
|
enum:
|
|
- arm,arm710t
|
|
- arm,arm720t
|
|
- arm,arm740t
|
|
- arm,arm7ej-s
|
|
- arm,arm7tdmi
|
|
- arm,arm7tdmi-s
|
|
- arm,arm9es
|
|
- arm,arm9ej-s
|
|
- arm,arm920t
|
|
- arm,arm922t
|
|
- arm,arm925
|
|
- arm,arm926e-s
|
|
- arm,arm926ej-s
|
|
- arm,arm940t
|
|
- arm,arm946e-s
|
|
- arm,arm966e-s
|
|
- arm,arm968e-s
|
|
- arm,arm9tdmi
|
|
- arm,arm1020e
|
|
- arm,arm1020t
|
|
- arm,arm1022e
|
|
- arm,arm1026ej-s
|
|
- arm,arm1136j-s
|
|
- arm,arm1136jf-s
|
|
- arm,arm1156t2-s
|
|
- arm,arm1156t2f-s
|
|
- arm,arm1176jzf
|
|
- arm,arm1176jz-s
|
|
- arm,arm1176jzf-s
|
|
- arm,arm11mpcore
|
|
- arm,armv8 # Only for s/w models
|
|
- arm,cortex-a5
|
|
- arm,cortex-a7
|
|
- arm,cortex-a8
|
|
- arm,cortex-a9
|
|
- arm,cortex-a12
|
|
- arm,cortex-a15
|
|
- arm,cortex-a17
|
|
- arm,cortex-a53
|
|
- arm,cortex-a57
|
|
- arm,cortex-a72
|
|
- arm,cortex-a73
|
|
- arm,cortex-m0
|
|
- arm,cortex-m0+
|
|
- arm,cortex-m1
|
|
- arm,cortex-m3
|
|
- arm,cortex-m4
|
|
- arm,cortex-r4
|
|
- arm,cortex-r5
|
|
- arm,cortex-r7
|
|
- brcm,brahma-b15
|
|
- brcm,brahma-b53
|
|
- brcm,vulcan
|
|
- cavium,thunder
|
|
- cavium,thunder2
|
|
- faraday,fa526
|
|
- intel,sa110
|
|
- intel,sa1100
|
|
- marvell,feroceon
|
|
- marvell,mohawk
|
|
- marvell,pj4a
|
|
- marvell,pj4b
|
|
- marvell,sheeva-v5
|
|
- marvell,sheeva-v7
|
|
- nvidia,tegra132-denver
|
|
- nvidia,tegra186-denver
|
|
- nvidia,tegra194-carmel
|
|
- qcom,krait
|
|
- qcom,kryo
|
|
- qcom,kryo385
|
|
- qcom,scorpion
|
|
|
|
enable-method:
|
|
allOf:
|
|
- $ref: '/schemas/types.yaml#/definitions/string'
|
|
- oneOf:
|
|
# On ARM v8 64-bit this property is required
|
|
- enum:
|
|
- psci
|
|
- spin-table
|
|
# On ARM 32-bit systems this property is optional
|
|
- enum:
|
|
- actions,s500-smp
|
|
- allwinner,sun6i-a31
|
|
- allwinner,sun8i-a23
|
|
- allwinner,sun9i-a80-smp
|
|
- allwinner,sun8i-a83t-smp
|
|
- amlogic,meson8-smp
|
|
- amlogic,meson8b-smp
|
|
- arm,realview-smp
|
|
- brcm,bcm11351-cpu-method
|
|
- brcm,bcm23550
|
|
- brcm,bcm2836-smp
|
|
- brcm,bcm63138
|
|
- brcm,bcm-nsp-smp
|
|
- brcm,brahma-b15
|
|
- marvell,armada-375-smp
|
|
- marvell,armada-380-smp
|
|
- marvell,armada-390-smp
|
|
- marvell,armada-xp-smp
|
|
- marvell,98dx3236-smp
|
|
- mediatek,mt6589-smp
|
|
- mediatek,mt81xx-tz-smp
|
|
- qcom,gcc-msm8660
|
|
- qcom,kpss-acc-v1
|
|
- qcom,kpss-acc-v2
|
|
- renesas,apmu
|
|
- renesas,r9a06g032-smp
|
|
- rockchip,rk3036-smp
|
|
- rockchip,rk3066-smp
|
|
- socionext,milbeaut-m10v-smp
|
|
- ste,dbx500-smp
|
|
|
|
cpu-release-addr:
|
|
$ref: '/schemas/types.yaml#/definitions/uint64'
|
|
|
|
description:
|
|
Required for systems that have an "enable-method"
|
|
property value of "spin-table".
|
|
On ARM v8 64-bit systems must be a two cell
|
|
property identifying a 64-bit zero-initialised
|
|
memory location.
|
|
|
|
cpu-idle-states:
|
|
$ref: '/schemas/types.yaml#/definitions/phandle-array'
|
|
description: |
|
|
List of phandles to idle state nodes supported
|
|
by this cpu (see ./idle-states.txt).
|
|
|
|
capacity-dmips-mhz:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32'
|
|
description:
|
|
u32 value representing CPU capacity (see ./cpu-capacity.txt) in
|
|
DMIPS/MHz, relative to highest capacity-dmips-mhz
|
|
in the system.
|
|
|
|
dynamic-power-coefficient:
|
|
$ref: '/schemas/types.yaml#/definitions/uint32'
|
|
description:
|
|
A u32 value that represents the running time dynamic
|
|
power coefficient in units of uW/MHz/V^2. The
|
|
coefficient can either be calculated from power
|
|
measurements or derived by analysis.
|
|
|
|
The dynamic power consumption of the CPU is
|
|
proportional to the square of the Voltage (V) and
|
|
the clock frequency (f). The coefficient is used to
|
|
calculate the dynamic power as below -
|
|
|
|
Pdyn = dynamic-power-coefficient * V^2 * f
|
|
|
|
where voltage is in V, frequency is in MHz.
|
|
|
|
qcom,saw:
|
|
$ref: '/schemas/types.yaml#/definitions/phandle'
|
|
description: |
|
|
Specifies the SAW* node associated with this CPU.
|
|
|
|
Required for systems that have an "enable-method" property
|
|
value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
|
|
|
|
* arm/msm/qcom,saw2.txt
|
|
|
|
qcom,acc:
|
|
$ref: '/schemas/types.yaml#/definitions/phandle'
|
|
description: |
|
|
Specifies the ACC* node associated with this CPU.
|
|
|
|
Required for systems that have an "enable-method" property
|
|
value of "qcom,kpss-acc-v1" or "qcom,kpss-acc-v2"
|
|
|
|
* arm/msm/qcom,kpss-acc.txt
|
|
|
|
rockchip,pmu:
|
|
$ref: '/schemas/types.yaml#/definitions/phandle'
|
|
description: |
|
|
Specifies the syscon node controlling the cpu core power domains.
|
|
|
|
Optional for systems that have an "enable-method"
|
|
property value of "rockchip,rk3066-smp"
|
|
While optional, it is the preferred way to get access to
|
|
the cpu-core power-domains.
|
|
|
|
required:
|
|
- device_type
|
|
- reg
|
|
- compatible
|
|
|
|
dependencies:
|
|
rockchip,pmu: [enable-method]
|
|
|
|
examples:
|
|
- |
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x0>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a15";
|
|
reg = <0x1>;
|
|
};
|
|
|
|
cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x100>;
|
|
};
|
|
|
|
cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a7";
|
|
reg = <0x101>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
// Example 2 (Cortex-A8 uniprocessor 32-bit system):
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a8";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
// Example 3 (ARM 926EJ-S uniprocessor 32-bit system):
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <1>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,arm926ej-s";
|
|
reg = <0x0>;
|
|
};
|
|
};
|
|
|
|
- |
|
|
// Example 4 (ARM Cortex-A57 64-bit system):
|
|
cpus {
|
|
#size-cells = <0>;
|
|
#address-cells = <2>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@10000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10000>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@10001 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10001>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@10100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@10101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x0 0x10101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100000000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x0>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100000001 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x1>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100000100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100000101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100010000 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10000>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100010001 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10001>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100010100 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10100>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
|
|
cpu@100010101 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a57";
|
|
reg = <0x1 0x10101>;
|
|
enable-method = "spin-table";
|
|
cpu-release-addr = <0 0x20000000>;
|
|
};
|
|
};
|
|
...
|