502 lines
13 KiB
C
502 lines
13 KiB
C
/*
|
|
* Rockchip SoC DP (Display Port) interface driver.
|
|
*
|
|
* Copyright (C) Fuzhou Rockchip Electronics Co., Ltd.
|
|
* Author: Andy Yan <andy.yan@rock-chips.com>
|
|
* Yakir Yang <ykk@rock-chips.com>
|
|
* Jeff Chen <jeff.chen@rock-chips.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
#include <linux/component.h>
|
|
#include <linux/mfd/syscon.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_dp_helper.h>
|
|
#include <drm/drm_of.h>
|
|
#include <drm/drm_panel.h>
|
|
|
|
#include <video/of_videomode.h>
|
|
#include <video/videomode.h>
|
|
|
|
#include <drm/bridge/analogix_dp.h>
|
|
|
|
#include "rockchip_drm_drv.h"
|
|
#include "rockchip_drm_psr.h"
|
|
#include "rockchip_drm_vop.h"
|
|
|
|
#define RK3288_GRF_SOC_CON6 0x25c
|
|
#define RK3288_EDP_LCDC_SEL BIT(5)
|
|
#define RK3399_GRF_SOC_CON20 0x6250
|
|
#define RK3399_EDP_LCDC_SEL BIT(5)
|
|
|
|
#define HIWORD_UPDATE(val, mask) (val | (mask) << 16)
|
|
|
|
#define PSR_WAIT_LINE_FLAG_TIMEOUT_MS 100
|
|
|
|
#define to_dp(nm) container_of(nm, struct rockchip_dp_device, nm)
|
|
|
|
/**
|
|
* struct rockchip_dp_chip_data - splite the grf setting of kind of chips
|
|
* @lcdsel_grf_reg: grf register offset of lcdc select
|
|
* @lcdsel_big: reg value of selecting vop big for eDP
|
|
* @lcdsel_lit: reg value of selecting vop little for eDP
|
|
* @chip_type: specific chip type
|
|
*/
|
|
struct rockchip_dp_chip_data {
|
|
u32 lcdsel_grf_reg;
|
|
u32 lcdsel_big;
|
|
u32 lcdsel_lit;
|
|
u32 chip_type;
|
|
};
|
|
|
|
struct rockchip_dp_device {
|
|
struct drm_device *drm_dev;
|
|
struct device *dev;
|
|
struct drm_encoder encoder;
|
|
struct drm_display_mode mode;
|
|
|
|
struct clk *pclk;
|
|
struct clk *grfclk;
|
|
struct regmap *grf;
|
|
struct reset_control *rst;
|
|
|
|
struct work_struct psr_work;
|
|
spinlock_t psr_lock;
|
|
unsigned int psr_state;
|
|
|
|
const struct rockchip_dp_chip_data *data;
|
|
|
|
struct analogix_dp_plat_data plat_data;
|
|
};
|
|
|
|
static void analogix_dp_psr_set(struct drm_encoder *encoder, bool enabled)
|
|
{
|
|
struct rockchip_dp_device *dp = to_dp(encoder);
|
|
unsigned long flags;
|
|
|
|
if (!analogix_dp_psr_supported(dp->dev))
|
|
return;
|
|
|
|
dev_dbg(dp->dev, "%s PSR...\n", enabled ? "Entry" : "Exit");
|
|
|
|
spin_lock_irqsave(&dp->psr_lock, flags);
|
|
if (enabled)
|
|
dp->psr_state = EDP_VSC_PSR_STATE_ACTIVE;
|
|
else
|
|
dp->psr_state = ~EDP_VSC_PSR_STATE_ACTIVE;
|
|
|
|
schedule_work(&dp->psr_work);
|
|
spin_unlock_irqrestore(&dp->psr_lock, flags);
|
|
}
|
|
|
|
static void analogix_dp_psr_work(struct work_struct *work)
|
|
{
|
|
struct rockchip_dp_device *dp =
|
|
container_of(work, typeof(*dp), psr_work);
|
|
struct drm_crtc *crtc = dp->encoder.crtc;
|
|
int psr_state = dp->psr_state;
|
|
int vact_end;
|
|
int ret;
|
|
unsigned long flags;
|
|
|
|
if (!crtc)
|
|
return;
|
|
|
|
vact_end = crtc->mode.vtotal - crtc->mode.vsync_start + crtc->mode.vdisplay;
|
|
|
|
ret = rockchip_drm_wait_line_flag(dp->encoder.crtc, vact_end,
|
|
PSR_WAIT_LINE_FLAG_TIMEOUT_MS);
|
|
if (ret) {
|
|
dev_err(dp->dev, "line flag interrupt did not arrive\n");
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&dp->psr_lock, flags);
|
|
if (psr_state == EDP_VSC_PSR_STATE_ACTIVE)
|
|
analogix_dp_enable_psr(dp->dev);
|
|
else
|
|
analogix_dp_disable_psr(dp->dev);
|
|
spin_unlock_irqrestore(&dp->psr_lock, flags);
|
|
}
|
|
|
|
static int rockchip_dp_pre_init(struct rockchip_dp_device *dp)
|
|
{
|
|
reset_control_assert(dp->rst);
|
|
usleep_range(10, 20);
|
|
reset_control_deassert(dp->rst);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_dp_poweron(struct analogix_dp_plat_data *plat_data)
|
|
{
|
|
struct rockchip_dp_device *dp = to_dp(plat_data);
|
|
int ret;
|
|
|
|
cancel_work_sync(&dp->psr_work);
|
|
|
|
ret = clk_prepare_enable(dp->pclk);
|
|
if (ret < 0) {
|
|
dev_err(dp->dev, "failed to enable pclk %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rockchip_dp_pre_init(dp);
|
|
if (ret < 0) {
|
|
dev_err(dp->dev, "failed to dp pre init %d\n", ret);
|
|
clk_disable_unprepare(dp->pclk);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_dp_powerdown(struct analogix_dp_plat_data *plat_data)
|
|
{
|
|
struct rockchip_dp_device *dp = to_dp(plat_data);
|
|
|
|
clk_disable_unprepare(dp->pclk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_dp_get_modes(struct analogix_dp_plat_data *plat_data,
|
|
struct drm_connector *connector)
|
|
{
|
|
struct drm_display_info *di = &connector->display_info;
|
|
/* VOP couldn't output YUV video format for eDP rightly */
|
|
u32 mask = DRM_COLOR_FORMAT_YCRCB444 | DRM_COLOR_FORMAT_YCRCB422;
|
|
|
|
if ((di->color_formats & mask)) {
|
|
DRM_DEBUG_KMS("Swapping display color format from YUV to RGB\n");
|
|
di->color_formats &= ~mask;
|
|
di->color_formats |= DRM_COLOR_FORMAT_RGB444;
|
|
di->bpc = 8;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool
|
|
rockchip_dp_drm_encoder_mode_fixup(struct drm_encoder *encoder,
|
|
const struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
/* do nothing */
|
|
return true;
|
|
}
|
|
|
|
static void rockchip_dp_drm_encoder_mode_set(struct drm_encoder *encoder,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted)
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
static void rockchip_dp_drm_encoder_enable(struct drm_encoder *encoder)
|
|
{
|
|
struct rockchip_dp_device *dp = to_dp(encoder);
|
|
int ret;
|
|
u32 val;
|
|
|
|
ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node, encoder);
|
|
if (ret < 0)
|
|
return;
|
|
|
|
if (ret)
|
|
val = dp->data->lcdsel_lit;
|
|
else
|
|
val = dp->data->lcdsel_big;
|
|
|
|
dev_dbg(dp->dev, "vop %s output to dp\n", (ret) ? "LIT" : "BIG");
|
|
|
|
ret = clk_prepare_enable(dp->grfclk);
|
|
if (ret < 0) {
|
|
dev_err(dp->dev, "failed to enable grfclk %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
ret = regmap_write(dp->grf, dp->data->lcdsel_grf_reg, val);
|
|
if (ret != 0)
|
|
dev_err(dp->dev, "Could not write to GRF: %d\n", ret);
|
|
|
|
clk_disable_unprepare(dp->grfclk);
|
|
}
|
|
|
|
static void rockchip_dp_drm_encoder_nop(struct drm_encoder *encoder)
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
static int
|
|
rockchip_dp_drm_encoder_atomic_check(struct drm_encoder *encoder,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
|
|
struct rockchip_dp_device *dp = to_dp(encoder);
|
|
int ret;
|
|
|
|
/*
|
|
* The hardware IC designed that VOP must output the RGB10 video
|
|
* format to eDP controller, and if eDP panel only support RGB8,
|
|
* then eDP controller should cut down the video data, not via VOP
|
|
* controller, that's why we need to hardcode the VOP output mode
|
|
* to RGA10 here.
|
|
*/
|
|
|
|
s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
|
|
s->output_type = DRM_MODE_CONNECTOR_eDP;
|
|
if (dp->data->chip_type == RK3399_EDP) {
|
|
/*
|
|
* For RK3399, VOP Lit must code the out mode to RGB888,
|
|
* VOP Big must code the out mode to RGB10.
|
|
*/
|
|
ret = drm_of_encoder_active_endpoint_id(dp->dev->of_node,
|
|
encoder);
|
|
if (ret > 0)
|
|
s->output_mode = ROCKCHIP_OUT_MODE_P888;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct drm_encoder_helper_funcs rockchip_dp_encoder_helper_funcs = {
|
|
.mode_fixup = rockchip_dp_drm_encoder_mode_fixup,
|
|
.mode_set = rockchip_dp_drm_encoder_mode_set,
|
|
.enable = rockchip_dp_drm_encoder_enable,
|
|
.disable = rockchip_dp_drm_encoder_nop,
|
|
.atomic_check = rockchip_dp_drm_encoder_atomic_check,
|
|
};
|
|
|
|
static void rockchip_dp_drm_encoder_destroy(struct drm_encoder *encoder)
|
|
{
|
|
drm_encoder_cleanup(encoder);
|
|
}
|
|
|
|
static struct drm_encoder_funcs rockchip_dp_encoder_funcs = {
|
|
.destroy = rockchip_dp_drm_encoder_destroy,
|
|
};
|
|
|
|
static int rockchip_dp_init(struct rockchip_dp_device *dp)
|
|
{
|
|
struct device *dev = dp->dev;
|
|
struct device_node *np = dev->of_node;
|
|
int ret;
|
|
|
|
dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
|
|
if (IS_ERR(dp->grf)) {
|
|
dev_err(dev, "failed to get rockchip,grf property\n");
|
|
return PTR_ERR(dp->grf);
|
|
}
|
|
|
|
dp->grfclk = devm_clk_get(dev, "grf");
|
|
if (PTR_ERR(dp->grfclk) == -ENOENT) {
|
|
dp->grfclk = NULL;
|
|
} else if (PTR_ERR(dp->grfclk) == -EPROBE_DEFER) {
|
|
return -EPROBE_DEFER;
|
|
} else if (IS_ERR(dp->grfclk)) {
|
|
dev_err(dev, "failed to get grf clock\n");
|
|
return PTR_ERR(dp->grfclk);
|
|
}
|
|
|
|
dp->pclk = devm_clk_get(dev, "pclk");
|
|
if (IS_ERR(dp->pclk)) {
|
|
dev_err(dev, "failed to get pclk property\n");
|
|
return PTR_ERR(dp->pclk);
|
|
}
|
|
|
|
dp->rst = devm_reset_control_get(dev, "dp");
|
|
if (IS_ERR(dp->rst)) {
|
|
dev_err(dev, "failed to get dp reset control\n");
|
|
return PTR_ERR(dp->rst);
|
|
}
|
|
|
|
ret = clk_prepare_enable(dp->pclk);
|
|
if (ret < 0) {
|
|
dev_err(dp->dev, "failed to enable pclk %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = rockchip_dp_pre_init(dp);
|
|
if (ret < 0) {
|
|
dev_err(dp->dev, "failed to pre init %d\n", ret);
|
|
clk_disable_unprepare(dp->pclk);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_dp_drm_create_encoder(struct rockchip_dp_device *dp)
|
|
{
|
|
struct drm_encoder *encoder = &dp->encoder;
|
|
struct drm_device *drm_dev = dp->drm_dev;
|
|
struct device *dev = dp->dev;
|
|
int ret;
|
|
|
|
encoder->possible_crtcs = drm_of_find_possible_crtcs(drm_dev,
|
|
dev->of_node);
|
|
DRM_DEBUG_KMS("possible_crtcs = 0x%x\n", encoder->possible_crtcs);
|
|
|
|
ret = drm_encoder_init(drm_dev, encoder, &rockchip_dp_encoder_funcs,
|
|
DRM_MODE_ENCODER_TMDS, NULL);
|
|
if (ret) {
|
|
DRM_ERROR("failed to initialize encoder with drm\n");
|
|
return ret;
|
|
}
|
|
|
|
drm_encoder_helper_add(encoder, &rockchip_dp_encoder_helper_funcs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rockchip_dp_bind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct rockchip_dp_device *dp = dev_get_drvdata(dev);
|
|
const struct rockchip_dp_chip_data *dp_data;
|
|
struct drm_device *drm_dev = data;
|
|
int ret;
|
|
|
|
/*
|
|
* Just like the probe function said, we don't need the
|
|
* device drvrate anymore, we should leave the charge to
|
|
* analogix dp driver, set the device drvdata to NULL.
|
|
*/
|
|
dev_set_drvdata(dev, NULL);
|
|
|
|
dp_data = of_device_get_match_data(dev);
|
|
if (!dp_data)
|
|
return -ENODEV;
|
|
|
|
ret = rockchip_dp_init(dp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dp->data = dp_data;
|
|
dp->drm_dev = drm_dev;
|
|
|
|
ret = rockchip_dp_drm_create_encoder(dp);
|
|
if (ret) {
|
|
DRM_ERROR("failed to create drm encoder\n");
|
|
return ret;
|
|
}
|
|
|
|
dp->plat_data.encoder = &dp->encoder;
|
|
|
|
dp->plat_data.dev_type = dp->data->chip_type;
|
|
dp->plat_data.power_on = rockchip_dp_poweron;
|
|
dp->plat_data.power_off = rockchip_dp_powerdown;
|
|
dp->plat_data.get_modes = rockchip_dp_get_modes;
|
|
|
|
spin_lock_init(&dp->psr_lock);
|
|
dp->psr_state = ~EDP_VSC_PSR_STATE_ACTIVE;
|
|
INIT_WORK(&dp->psr_work, analogix_dp_psr_work);
|
|
|
|
rockchip_drm_psr_register(&dp->encoder, analogix_dp_psr_set);
|
|
|
|
return analogix_dp_bind(dev, dp->drm_dev, &dp->plat_data);
|
|
}
|
|
|
|
static void rockchip_dp_unbind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct rockchip_dp_device *dp = dev_get_drvdata(dev);
|
|
|
|
rockchip_drm_psr_unregister(&dp->encoder);
|
|
|
|
analogix_dp_unbind(dev, master, data);
|
|
clk_disable_unprepare(dp->pclk);
|
|
}
|
|
|
|
static const struct component_ops rockchip_dp_component_ops = {
|
|
.bind = rockchip_dp_bind,
|
|
.unbind = rockchip_dp_unbind,
|
|
};
|
|
|
|
static int rockchip_dp_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct drm_panel *panel = NULL;
|
|
struct rockchip_dp_device *dp;
|
|
int ret;
|
|
|
|
ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
|
|
if (!dp)
|
|
return -ENOMEM;
|
|
|
|
dp->dev = dev;
|
|
|
|
dp->plat_data.panel = panel;
|
|
|
|
/*
|
|
* We just use the drvdata until driver run into component
|
|
* add function, and then we would set drvdata to null, so
|
|
* that analogix dp driver could take charge of the drvdata.
|
|
*/
|
|
platform_set_drvdata(pdev, dp);
|
|
|
|
return component_add(dev, &rockchip_dp_component_ops);
|
|
}
|
|
|
|
static int rockchip_dp_remove(struct platform_device *pdev)
|
|
{
|
|
component_del(&pdev->dev, &rockchip_dp_component_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops rockchip_dp_pm_ops = {
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = analogix_dp_suspend,
|
|
.resume_early = analogix_dp_resume,
|
|
#endif
|
|
};
|
|
|
|
static const struct rockchip_dp_chip_data rk3399_edp = {
|
|
.lcdsel_grf_reg = RK3399_GRF_SOC_CON20,
|
|
.lcdsel_big = HIWORD_UPDATE(0, RK3399_EDP_LCDC_SEL),
|
|
.lcdsel_lit = HIWORD_UPDATE(RK3399_EDP_LCDC_SEL, RK3399_EDP_LCDC_SEL),
|
|
.chip_type = RK3399_EDP,
|
|
};
|
|
|
|
static const struct rockchip_dp_chip_data rk3288_dp = {
|
|
.lcdsel_grf_reg = RK3288_GRF_SOC_CON6,
|
|
.lcdsel_big = HIWORD_UPDATE(0, RK3288_EDP_LCDC_SEL),
|
|
.lcdsel_lit = HIWORD_UPDATE(RK3288_EDP_LCDC_SEL, RK3288_EDP_LCDC_SEL),
|
|
.chip_type = RK3288_DP,
|
|
};
|
|
|
|
static const struct of_device_id rockchip_dp_dt_ids[] = {
|
|
{.compatible = "rockchip,rk3288-dp", .data = &rk3288_dp },
|
|
{.compatible = "rockchip,rk3399-edp", .data = &rk3399_edp },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rockchip_dp_dt_ids);
|
|
|
|
struct platform_driver rockchip_dp_driver = {
|
|
.probe = rockchip_dp_probe,
|
|
.remove = rockchip_dp_remove,
|
|
.driver = {
|
|
.name = "rockchip-dp",
|
|
.pm = &rockchip_dp_pm_ops,
|
|
.of_match_table = of_match_ptr(rockchip_dp_dt_ids),
|
|
},
|
|
};
|