515 lines
12 KiB
C
515 lines
12 KiB
C
/*
|
|
* Driver for Zarlink zl10036 DVB-S silicon tuner
|
|
*
|
|
* Copyright (C) 2006 Tino Reichardt
|
|
* Copyright (C) 2007-2009 Matthias Schwarzott <zzam@gentoo.de>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License Version 2, as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
**
|
|
* The data sheet for this tuner can be found at:
|
|
* http://www.mcmilk.de/projects/dvb-card/datasheets/ZL10036.pdf
|
|
*
|
|
* This one is working: (at my Avermedia DVB-S Pro)
|
|
* - zl10036 (40pin, FTA)
|
|
*
|
|
* A driver for zl10038 should be very similar.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/dvb/frontend.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#include "zl10036.h"
|
|
|
|
static int zl10036_debug;
|
|
#define dprintk(level, args...) \
|
|
do { if (zl10036_debug & level) printk(KERN_DEBUG "zl10036: " args); \
|
|
} while (0)
|
|
|
|
#define deb_info(args...) dprintk(0x01, args)
|
|
#define deb_i2c(args...) dprintk(0x02, args)
|
|
|
|
struct zl10036_state {
|
|
struct i2c_adapter *i2c;
|
|
const struct zl10036_config *config;
|
|
u32 frequency;
|
|
u8 br, bf;
|
|
};
|
|
|
|
|
|
/* This driver assumes the tuner is driven by a 10.111MHz Cristal */
|
|
#define _XTAL 10111
|
|
|
|
/* Some of the possible dividers:
|
|
* 64, (write 0x05 to reg), freq step size 158kHz
|
|
* 10, (write 0x0a to reg), freq step size 1.011kHz (used here)
|
|
* 5, (write 0x09 to reg), freq step size 2.022kHz
|
|
*/
|
|
|
|
#define _RDIV 10
|
|
#define _RDIV_REG 0x0a
|
|
#define _FR (_XTAL/_RDIV)
|
|
|
|
#define STATUS_POR 0x80 /* Power on Reset */
|
|
#define STATUS_FL 0x40 /* Frequency & Phase Lock */
|
|
|
|
/* read/write for zl10036 and zl10038 */
|
|
|
|
static int zl10036_read_status_reg(struct zl10036_state *state)
|
|
{
|
|
u8 status;
|
|
struct i2c_msg msg[1] = {
|
|
{ .addr = state->config->tuner_address, .flags = I2C_M_RD,
|
|
.buf = &status, .len = sizeof(status) },
|
|
};
|
|
|
|
if (i2c_transfer(state->i2c, msg, 1) != 1) {
|
|
printk(KERN_ERR "%s: i2c read failed at addr=%02x\n",
|
|
__func__, state->config->tuner_address);
|
|
return -EIO;
|
|
}
|
|
|
|
deb_i2c("R(status): %02x [FL=%d]\n", status,
|
|
(status & STATUS_FL) ? 1 : 0);
|
|
if (status & STATUS_POR)
|
|
deb_info("%s: Power-On-Reset bit enabled - need to initialize the tuner\n",
|
|
__func__);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int zl10036_write(struct zl10036_state *state, u8 buf[], u8 count)
|
|
{
|
|
struct i2c_msg msg[1] = {
|
|
{ .addr = state->config->tuner_address, .flags = 0,
|
|
.buf = buf, .len = count },
|
|
};
|
|
u8 reg = 0;
|
|
int ret;
|
|
|
|
if (zl10036_debug & 0x02) {
|
|
/* every 8bit-value satisifes this!
|
|
* so only check for debug log */
|
|
if ((buf[0] & 0x80) == 0x00)
|
|
reg = 2;
|
|
else if ((buf[0] & 0xc0) == 0x80)
|
|
reg = 4;
|
|
else if ((buf[0] & 0xf0) == 0xc0)
|
|
reg = 6;
|
|
else if ((buf[0] & 0xf0) == 0xd0)
|
|
reg = 8;
|
|
else if ((buf[0] & 0xf0) == 0xe0)
|
|
reg = 10;
|
|
else if ((buf[0] & 0xf0) == 0xf0)
|
|
reg = 12;
|
|
|
|
deb_i2c("W(%d):", reg);
|
|
{
|
|
int i;
|
|
for (i = 0; i < count; i++)
|
|
printk(KERN_CONT " %02x", buf[i]);
|
|
printk(KERN_CONT "\n");
|
|
}
|
|
}
|
|
|
|
ret = i2c_transfer(state->i2c, msg, 1);
|
|
if (ret != 1) {
|
|
printk(KERN_ERR "%s: i2c error, ret=%d\n", __func__, ret);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void zl10036_release(struct dvb_frontend *fe)
|
|
{
|
|
struct zl10036_state *state = fe->tuner_priv;
|
|
|
|
fe->tuner_priv = NULL;
|
|
kfree(state);
|
|
}
|
|
|
|
static int zl10036_sleep(struct dvb_frontend *fe)
|
|
{
|
|
struct zl10036_state *state = fe->tuner_priv;
|
|
u8 buf[] = { 0xf0, 0x80 }; /* regs 12/13 */
|
|
int ret;
|
|
|
|
deb_info("%s\n", __func__);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
|
|
|
|
ret = zl10036_write(state, buf, sizeof(buf));
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* register map of the ZL10036/ZL10038
|
|
*
|
|
* reg[default] content
|
|
* 2[0x00]: 0 | N14 | N13 | N12 | N11 | N10 | N9 | N8
|
|
* 3[0x00]: N7 | N6 | N5 | N4 | N3 | N2 | N1 | N0
|
|
* 4[0x80]: 1 | 0 | RFG | BA1 | BA0 | BG1 | BG0 | LEN
|
|
* 5[0x00]: P0 | C1 | C0 | R4 | R3 | R2 | R1 | R0
|
|
* 6[0xc0]: 1 | 1 | 0 | 0 | RSD | 0 | 0 | 0
|
|
* 7[0x20]: P1 | BF6 | BF5 | BF4 | BF3 | BF2 | BF1 | 0
|
|
* 8[0xdb]: 1 | 1 | 0 | 1 | 0 | CC | 1 | 1
|
|
* 9[0x30]: VSD | V2 | V1 | V0 | S3 | S2 | S1 | S0
|
|
* 10[0xe1]: 1 | 1 | 1 | 0 | 0 | LS2 | LS1 | LS0
|
|
* 11[0xf5]: WS | WH2 | WH1 | WH0 | WL2 | WL1 | WL0 | WRE
|
|
* 12[0xf0]: 1 | 1 | 1 | 1 | 0 | 0 | 0 | 0
|
|
* 13[0x28]: PD | BR4 | BR3 | BR2 | BR1 | BR0 | CLR | TL
|
|
*/
|
|
|
|
static int zl10036_set_frequency(struct zl10036_state *state, u32 frequency)
|
|
{
|
|
u8 buf[2];
|
|
u32 div, foffset;
|
|
|
|
div = (frequency + _FR/2) / _FR;
|
|
state->frequency = div * _FR;
|
|
|
|
foffset = frequency - state->frequency;
|
|
|
|
buf[0] = (div >> 8) & 0x7f;
|
|
buf[1] = (div >> 0) & 0xff;
|
|
|
|
deb_info("%s: ftodo=%u fpriv=%u ferr=%d div=%u\n", __func__,
|
|
frequency, state->frequency, foffset, div);
|
|
|
|
return zl10036_write(state, buf, sizeof(buf));
|
|
}
|
|
|
|
static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw)
|
|
{
|
|
/* fbw is measured in kHz */
|
|
u8 br, bf;
|
|
int ret;
|
|
u8 buf_bf[] = {
|
|
0xc0, 0x00, /* 6/7: rsd=0 bf=0 */
|
|
};
|
|
u8 buf_br[] = {
|
|
0xf0, 0x00, /* 12/13: br=0xa clr=0 tl=0*/
|
|
};
|
|
u8 zl10036_rsd_off[] = { 0xc8 }; /* set RSD=1 */
|
|
|
|
/* ensure correct values */
|
|
if (fbw > 35000)
|
|
fbw = 35000;
|
|
if (fbw < 8000)
|
|
fbw = 8000;
|
|
|
|
#define _BR_MAXIMUM (_XTAL/575) /* _XTAL / 575kHz = 17 */
|
|
|
|
/* <= 28,82 MHz */
|
|
if (fbw <= 28820) {
|
|
br = _BR_MAXIMUM;
|
|
} else {
|
|
/*
|
|
* f(bw)=34,6MHz f(xtal)=10.111MHz
|
|
* br = (10111/34600) * 63 * 1/K = 14;
|
|
*/
|
|
br = ((_XTAL * 21 * 1000) / (fbw * 419));
|
|
}
|
|
|
|
/* ensure correct values */
|
|
if (br < 4)
|
|
br = 4;
|
|
if (br > _BR_MAXIMUM)
|
|
br = _BR_MAXIMUM;
|
|
|
|
/*
|
|
* k = 1.257
|
|
* bf = fbw/_XTAL * br * k - 1 */
|
|
|
|
bf = (fbw * br * 1257) / (_XTAL * 1000) - 1;
|
|
|
|
/* ensure correct values */
|
|
if (bf > 62)
|
|
bf = 62;
|
|
|
|
buf_bf[1] = (bf << 1) & 0x7e;
|
|
buf_br[1] = (br << 2) & 0x7c;
|
|
deb_info("%s: BW=%d br=%u bf=%u\n", __func__, fbw, br, bf);
|
|
|
|
if (br != state->br) {
|
|
ret = zl10036_write(state, buf_br, sizeof(buf_br));
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
if (bf != state->bf) {
|
|
ret = zl10036_write(state, buf_bf, sizeof(buf_bf));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* time = br/(32* fxtal) */
|
|
/* minimal sleep time to be calculated
|
|
* maximum br is 63 -> max time = 2 /10 MHz = 2e-7 */
|
|
msleep(1);
|
|
|
|
ret = zl10036_write(state, zl10036_rsd_off,
|
|
sizeof(zl10036_rsd_off));
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
state->br = br;
|
|
state->bf = bf;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zl10036_set_gain_params(struct zl10036_state *state,
|
|
int c)
|
|
{
|
|
u8 buf[2];
|
|
u8 rfg, ba, bg;
|
|
|
|
/* default values */
|
|
rfg = 0; /* enable when using an lna */
|
|
ba = 1;
|
|
bg = 1;
|
|
|
|
/* reg 4 */
|
|
buf[0] = 0x80 | ((rfg << 5) & 0x20)
|
|
| ((ba << 3) & 0x18) | ((bg << 1) & 0x06);
|
|
|
|
if (!state->config->rf_loop_enable)
|
|
buf[0] |= 0x01;
|
|
|
|
/* P0=0 */
|
|
buf[1] = _RDIV_REG | ((c << 5) & 0x60);
|
|
|
|
deb_info("%s: c=%u rfg=%u ba=%u bg=%u\n", __func__, c, rfg, ba, bg);
|
|
return zl10036_write(state, buf, sizeof(buf));
|
|
}
|
|
|
|
static int zl10036_set_params(struct dvb_frontend *fe)
|
|
{
|
|
struct dtv_frontend_properties *p = &fe->dtv_property_cache;
|
|
struct zl10036_state *state = fe->tuner_priv;
|
|
int ret = 0;
|
|
u32 frequency = p->frequency;
|
|
u32 fbw;
|
|
int i;
|
|
u8 c;
|
|
|
|
/* ensure correct values
|
|
* maybe redundant as core already checks this */
|
|
if ((frequency < fe->ops.info.frequency_min)
|
|
|| (frequency > fe->ops.info.frequency_max))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* alpha = 1.35 for dvb-s
|
|
* fBW = (alpha*symbolrate)/(2*0.8)
|
|
* 1.35 / (2*0.8) = 27 / 32
|
|
*/
|
|
fbw = (27 * p->symbol_rate) / 32;
|
|
|
|
/* scale to kHz */
|
|
fbw /= 1000;
|
|
|
|
/* Add safe margin of 3MHz */
|
|
fbw += 3000;
|
|
|
|
/* setting the charge pump - guessed values */
|
|
if (frequency < 950000)
|
|
return -EINVAL;
|
|
else if (frequency < 1250000)
|
|
c = 0;
|
|
else if (frequency < 1750000)
|
|
c = 1;
|
|
else if (frequency < 2175000)
|
|
c = 2;
|
|
else
|
|
return -EINVAL;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
|
|
|
|
ret = zl10036_set_gain_params(state, c);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = zl10036_set_frequency(state, p->frequency);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = zl10036_set_bandwidth(state, fbw);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* wait for tuner lock - no idea if this is really needed */
|
|
for (i = 0; i < 20; i++) {
|
|
ret = zl10036_read_status_reg(state);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
/* check Frequency & Phase Lock Bit */
|
|
if (ret & STATUS_FL)
|
|
break;
|
|
|
|
msleep(10);
|
|
}
|
|
|
|
error:
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int zl10036_get_frequency(struct dvb_frontend *fe, u32 *frequency)
|
|
{
|
|
struct zl10036_state *state = fe->tuner_priv;
|
|
|
|
*frequency = state->frequency;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zl10036_init_regs(struct zl10036_state *state)
|
|
{
|
|
int ret;
|
|
int i;
|
|
|
|
/* could also be one block from reg 2 to 13 and additional 10/11 */
|
|
u8 zl10036_init_tab[][2] = {
|
|
{ 0x04, 0x00 }, /* 2/3: div=0x400 - arbitrary value */
|
|
{ 0x8b, _RDIV_REG }, /* 4/5: rfg=0 ba=1 bg=1 len=? */
|
|
/* p0=0 c=0 r=_RDIV_REG */
|
|
{ 0xc0, 0x20 }, /* 6/7: rsd=0 bf=0x10 */
|
|
{ 0xd3, 0x40 }, /* 8/9: from datasheet */
|
|
{ 0xe3, 0x5b }, /* 10/11: lock window level */
|
|
{ 0xf0, 0x28 }, /* 12/13: br=0xa clr=0 tl=0*/
|
|
{ 0xe3, 0xf9 }, /* 10/11: unlock window level */
|
|
};
|
|
|
|
/* invalid values to trigger writing */
|
|
state->br = 0xff;
|
|
state->bf = 0xff;
|
|
|
|
if (!state->config->rf_loop_enable)
|
|
zl10036_init_tab[1][0] |= 0x01;
|
|
|
|
deb_info("%s\n", __func__);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(zl10036_init_tab); i++) {
|
|
ret = zl10036_write(state, zl10036_init_tab[i], 2);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int zl10036_init(struct dvb_frontend *fe)
|
|
{
|
|
struct zl10036_state *state = fe->tuner_priv;
|
|
int ret = 0;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
|
|
|
|
ret = zl10036_read_status_reg(state);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Only init if Power-on-Reset bit is set? */
|
|
ret = zl10036_init_regs(state);
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dvb_tuner_ops zl10036_tuner_ops = {
|
|
.info = {
|
|
.name = "Zarlink ZL10036",
|
|
.frequency_min = 950000,
|
|
.frequency_max = 2175000
|
|
},
|
|
.init = zl10036_init,
|
|
.release = zl10036_release,
|
|
.sleep = zl10036_sleep,
|
|
.set_params = zl10036_set_params,
|
|
.get_frequency = zl10036_get_frequency,
|
|
};
|
|
|
|
struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe,
|
|
const struct zl10036_config *config,
|
|
struct i2c_adapter *i2c)
|
|
{
|
|
struct zl10036_state *state;
|
|
int ret;
|
|
|
|
if (!config) {
|
|
printk(KERN_ERR "%s: no config specified", __func__);
|
|
return NULL;
|
|
}
|
|
|
|
state = kzalloc(sizeof(struct zl10036_state), GFP_KERNEL);
|
|
if (!state)
|
|
return NULL;
|
|
|
|
state->config = config;
|
|
state->i2c = i2c;
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 1); /* open i2c_gate */
|
|
|
|
ret = zl10036_read_status_reg(state);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: No zl10036 found\n", __func__);
|
|
goto error;
|
|
}
|
|
|
|
ret = zl10036_init_regs(state);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "%s: tuner initialization failed\n",
|
|
__func__);
|
|
goto error;
|
|
}
|
|
|
|
if (fe->ops.i2c_gate_ctrl)
|
|
fe->ops.i2c_gate_ctrl(fe, 0); /* close i2c_gate */
|
|
|
|
fe->tuner_priv = state;
|
|
|
|
memcpy(&fe->ops.tuner_ops, &zl10036_tuner_ops,
|
|
sizeof(struct dvb_tuner_ops));
|
|
printk(KERN_INFO "%s: tuner initialization (%s addr=0x%02x) ok\n",
|
|
__func__, fe->ops.tuner_ops.info.name, config->tuner_address);
|
|
|
|
return fe;
|
|
|
|
error:
|
|
kfree(state);
|
|
return NULL;
|
|
}
|
|
EXPORT_SYMBOL(zl10036_attach);
|
|
|
|
module_param_named(debug, zl10036_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
|
|
MODULE_DESCRIPTION("DVB ZL10036 driver");
|
|
MODULE_AUTHOR("Tino Reichardt");
|
|
MODULE_AUTHOR("Matthias Schwarzott");
|
|
MODULE_LICENSE("GPL");
|