3522 lines
100 KiB
C
3522 lines
100 KiB
C
/*
|
||
* linux/drivers/ide/ide-cd.c
|
||
*
|
||
* Copyright (C) 1994, 1995, 1996 scott snyder <snyder@fnald0.fnal.gov>
|
||
* Copyright (C) 1996-1998 Erik Andersen <andersee@debian.org>
|
||
* Copyright (C) 1998-2000 Jens Axboe <axboe@suse.de>
|
||
*
|
||
* May be copied or modified under the terms of the GNU General Public
|
||
* License. See linux/COPYING for more information.
|
||
*
|
||
* ATAPI CD-ROM driver. To be used with ide.c.
|
||
* See Documentation/cdrom/ide-cd for usage information.
|
||
*
|
||
* Suggestions are welcome. Patches that work are more welcome though. ;-)
|
||
* For those wishing to work on this driver, please be sure you download
|
||
* and comply with the latest Mt. Fuji (SFF8090 version 4) and ATAPI
|
||
* (SFF-8020i rev 2.6) standards. These documents can be obtained by
|
||
* anonymous ftp from:
|
||
* ftp://fission.dt.wdc.com/pub/standards/SFF_atapi/spec/SFF8020-r2.6/PS/8020r26.ps
|
||
* ftp://ftp.avc-pioneer.com/Mtfuji4/Spec/Fuji4r10.pdf
|
||
*
|
||
* Drives that deviate from these standards will be accommodated as much
|
||
* as possible via compile time or command-line options. Since I only have
|
||
* a few drives, you generally need to send me patches...
|
||
*
|
||
* ----------------------------------
|
||
* TO DO LIST:
|
||
* -Make it so that Pioneer CD DR-A24X and friends don't get screwed up on
|
||
* boot
|
||
*
|
||
* ----------------------------------
|
||
* 1.00 Oct 31, 1994 -- Initial version.
|
||
* 1.01 Nov 2, 1994 -- Fixed problem with starting request in
|
||
* cdrom_check_status.
|
||
* 1.03 Nov 25, 1994 -- leaving unmask_intr[] as a user-setting (as for disks)
|
||
* (from mlord) -- minor changes to cdrom_setup()
|
||
* -- renamed ide_dev_s to ide_drive_t, enable irq on command
|
||
* 2.00 Nov 27, 1994 -- Generalize packet command interface;
|
||
* add audio ioctls.
|
||
* 2.01 Dec 3, 1994 -- Rework packet command interface to handle devices
|
||
* which send an interrupt when ready for a command.
|
||
* 2.02 Dec 11, 1994 -- Cache the TOC in the driver.
|
||
* Don't use SCMD_PLAYAUDIO_TI; it's not included
|
||
* in the current version of ATAPI.
|
||
* Try to use LBA instead of track or MSF addressing
|
||
* when possible.
|
||
* Don't wait for READY_STAT.
|
||
* 2.03 Jan 10, 1995 -- Rewrite block read routines to handle block sizes
|
||
* other than 2k and to move multiple sectors in a
|
||
* single transaction.
|
||
* 2.04 Apr 21, 1995 -- Add work-around for Creative Labs CD220E drives.
|
||
* Thanks to Nick Saw <cwsaw@pts7.pts.mot.com> for
|
||
* help in figuring this out. Ditto for Acer and
|
||
* Aztech drives, which seem to have the same problem.
|
||
* 2.04b May 30, 1995 -- Fix to match changes in ide.c version 3.16 -ml
|
||
* 2.05 Jun 8, 1995 -- Don't attempt to retry after an illegal request
|
||
* or data protect error.
|
||
* Use HWIF and DEV_HWIF macros as in ide.c.
|
||
* Always try to do a request_sense after
|
||
* a failed command.
|
||
* Include an option to give textual descriptions
|
||
* of ATAPI errors.
|
||
* Fix a bug in handling the sector cache which
|
||
* showed up if the drive returned data in 512 byte
|
||
* blocks (like Pioneer drives). Thanks to
|
||
* Richard Hirst <srh@gpt.co.uk> for diagnosing this.
|
||
* Properly supply the page number field in the
|
||
* MODE_SELECT command.
|
||
* PLAYAUDIO12 is broken on the Aztech; work around it.
|
||
* 2.05x Aug 11, 1995 -- lots of data structure renaming/restructuring in ide.c
|
||
* (my apologies to Scott, but now ide-cd.c is independent)
|
||
* 3.00 Aug 22, 1995 -- Implement CDROMMULTISESSION ioctl.
|
||
* Implement CDROMREADAUDIO ioctl (UNTESTED).
|
||
* Use input_ide_data() and output_ide_data().
|
||
* Add door locking.
|
||
* Fix usage count leak in cdrom_open, which happened
|
||
* when a read-write mount was attempted.
|
||
* Try to load the disk on open.
|
||
* Implement CDROMEJECT_SW ioctl (off by default).
|
||
* Read total cdrom capacity during open.
|
||
* Rearrange logic in cdrom_decode_status. Issue
|
||
* request sense commands for failed packet commands
|
||
* from here instead of from cdrom_queue_packet_command.
|
||
* Fix a race condition in retrieving error information.
|
||
* Suppress printing normal unit attention errors and
|
||
* some drive not ready errors.
|
||
* Implement CDROMVOLREAD ioctl.
|
||
* Implement CDROMREADMODE1/2 ioctls.
|
||
* Fix race condition in setting up interrupt handlers
|
||
* when the `serialize' option is used.
|
||
* 3.01 Sep 2, 1995 -- Fix ordering of reenabling interrupts in
|
||
* cdrom_queue_request.
|
||
* Another try at using ide_[input,output]_data.
|
||
* 3.02 Sep 16, 1995 -- Stick total disk capacity in partition table as well.
|
||
* Make VERBOSE_IDE_CD_ERRORS dump failed command again.
|
||
* Dump out more information for ILLEGAL REQUEST errs.
|
||
* Fix handling of errors occurring before the
|
||
* packet command is transferred.
|
||
* Fix transfers with odd bytelengths.
|
||
* 3.03 Oct 27, 1995 -- Some Creative drives have an id of just `CD'.
|
||
* `DCI-2S10' drives are broken too.
|
||
* 3.04 Nov 20, 1995 -- So are Vertos drives.
|
||
* 3.05 Dec 1, 1995 -- Changes to go with overhaul of ide.c and ide-tape.c
|
||
* 3.06 Dec 16, 1995 -- Add support needed for partitions.
|
||
* More workarounds for Vertos bugs (based on patches
|
||
* from Holger Dietze <dietze@aix520.informatik.uni-leipzig.de>).
|
||
* Try to eliminate byteorder assumptions.
|
||
* Use atapi_cdrom_subchnl struct definition.
|
||
* Add STANDARD_ATAPI compilation option.
|
||
* 3.07 Jan 29, 1996 -- More twiddling for broken drives: Sony 55D,
|
||
* Vertos 300.
|
||
* Add NO_DOOR_LOCKING configuration option.
|
||
* Handle drive_cmd requests w/NULL args (for hdparm -t).
|
||
* Work around sporadic Sony55e audio play problem.
|
||
* 3.07a Feb 11, 1996 -- check drive->id for NULL before dereferencing, to fix
|
||
* problem with "hde=cdrom" with no drive present. -ml
|
||
* 3.08 Mar 6, 1996 -- More Vertos workarounds.
|
||
* 3.09 Apr 5, 1996 -- Add CDROMCLOSETRAY ioctl.
|
||
* Switch to using MSF addressing for audio commands.
|
||
* Reformat to match kernel tabbing style.
|
||
* Add CDROM_GET_UPC ioctl.
|
||
* 3.10 Apr 10, 1996 -- Fix compilation error with STANDARD_ATAPI.
|
||
* 3.11 Apr 29, 1996 -- Patch from Heiko Eissfeldt <heiko@colossus.escape.de>
|
||
* to remove redundant verify_area calls.
|
||
* 3.12 May 7, 1996 -- Rudimentary changer support. Based on patches
|
||
* from Gerhard Zuber <zuber@berlin.snafu.de>.
|
||
* Let open succeed even if there's no loaded disc.
|
||
* 3.13 May 19, 1996 -- Fixes for changer code.
|
||
* 3.14 May 29, 1996 -- Add work-around for Vertos 600.
|
||
* (From Hennus Bergman <hennus@sky.ow.nl>.)
|
||
* 3.15 July 2, 1996 -- Added support for Sanyo 3 CD changers
|
||
* from Ben Galliart <bgallia@luc.edu> with
|
||
* special help from Jeff Lightfoot
|
||
* <jeffml@pobox.com>
|
||
* 3.15a July 9, 1996 -- Improved Sanyo 3 CD changer identification
|
||
* 3.16 Jul 28, 1996 -- Fix from Gadi to reduce kernel stack usage for ioctl.
|
||
* 3.17 Sep 17, 1996 -- Tweak audio reads for some drives.
|
||
* Start changing CDROMLOADFROMSLOT to CDROM_SELECT_DISC.
|
||
* 3.18 Oct 31, 1996 -- Added module and DMA support.
|
||
*
|
||
*
|
||
* 4.00 Nov 5, 1996 -- New ide-cd maintainer,
|
||
* Erik B. Andersen <andersee@debian.org>
|
||
* -- Newer Creative drives don't always set the error
|
||
* register correctly. Make sure we see media changes
|
||
* regardless.
|
||
* -- Integrate with generic cdrom driver.
|
||
* -- CDROMGETSPINDOWN and CDROMSETSPINDOWN ioctls, based on
|
||
* a patch from Ciro Cattuto <>.
|
||
* -- Call set_device_ro.
|
||
* -- Implement CDROMMECHANISMSTATUS and CDROMSLOTTABLE
|
||
* ioctls, based on patch by Erik Andersen
|
||
* -- Add some probes of drive capability during setup.
|
||
*
|
||
* 4.01 Nov 11, 1996 -- Split into ide-cd.c and ide-cd.h
|
||
* -- Removed CDROMMECHANISMSTATUS and CDROMSLOTTABLE
|
||
* ioctls in favor of a generalized approach
|
||
* using the generic cdrom driver.
|
||
* -- Fully integrated with the 2.1.X kernel.
|
||
* -- Other stuff that I forgot (lots of changes)
|
||
*
|
||
* 4.02 Dec 01, 1996 -- Applied patch from Gadi Oxman <gadio@netvision.net.il>
|
||
* to fix the drive door locking problems.
|
||
*
|
||
* 4.03 Dec 04, 1996 -- Added DSC overlap support.
|
||
* 4.04 Dec 29, 1996 -- Added CDROMREADRAW ioclt based on patch
|
||
* by Ales Makarov (xmakarov@sun.felk.cvut.cz)
|
||
*
|
||
* 4.05 Nov 20, 1997 -- Modified to print more drive info on init
|
||
* Minor other changes
|
||
* Fix errors on CDROMSTOP (If you have a "Dolphin",
|
||
* you must define IHAVEADOLPHIN)
|
||
* Added identifier so new Sanyo CD-changer works
|
||
* Better detection if door locking isn't supported
|
||
*
|
||
* 4.06 Dec 17, 1997 -- fixed endless "tray open" messages -ml
|
||
* 4.07 Dec 17, 1997 -- fallback to set pc->stat on "tray open"
|
||
* 4.08 Dec 18, 1997 -- spew less noise when tray is empty
|
||
* -- fix speed display for ACER 24X, 18X
|
||
* 4.09 Jan 04, 1998 -- fix handling of the last block so we return
|
||
* an end of file instead of an I/O error (Gadi)
|
||
* 4.10 Jan 24, 1998 -- fixed a bug so now changers can change to a new
|
||
* slot when there is no disc in the current slot.
|
||
* -- Fixed a memory leak where info->changer_info was
|
||
* malloc'ed but never free'd when closing the device.
|
||
* -- Cleaned up the global namespace a bit by making more
|
||
* functions static that should already have been.
|
||
* 4.11 Mar 12, 1998 -- Added support for the CDROM_SELECT_SPEED ioctl
|
||
* based on a patch for 2.0.33 by Jelle Foks
|
||
* <jelle@scintilla.utwente.nl>, a patch for 2.0.33
|
||
* by Toni Giorgino <toni@pcape2.pi.infn.it>, the SCSI
|
||
* version, and my own efforts. -erik
|
||
* -- Fixed a stupid bug which egcs was kind enough to
|
||
* inform me of where "Illegal mode for this track"
|
||
* was never returned due to a comparison on data
|
||
* types of limited range.
|
||
* 4.12 Mar 29, 1998 -- Fixed bug in CDROM_SELECT_SPEED so write speed is
|
||
* now set ionly for CD-R and CD-RW drives. I had
|
||
* removed this support because it produced errors.
|
||
* It produced errors _only_ for non-writers. duh.
|
||
* 4.13 May 05, 1998 -- Suppress useless "in progress of becoming ready"
|
||
* messages, since this is not an error.
|
||
* -- Change error messages to be const
|
||
* -- Remove a "\t" which looks ugly in the syslogs
|
||
* 4.14 July 17, 1998 -- Change to pointing to .ps version of ATAPI spec
|
||
* since the .pdf version doesn't seem to work...
|
||
* -- Updated the TODO list to something more current.
|
||
*
|
||
* 4.15 Aug 25, 1998 -- Updated ide-cd.h to respect mechine endianess,
|
||
* patch thanks to "Eddie C. Dost" <ecd@skynet.be>
|
||
*
|
||
* 4.50 Oct 19, 1998 -- New maintainers!
|
||
* Jens Axboe <axboe@image.dk>
|
||
* Chris Zwilling <chris@cloudnet.com>
|
||
*
|
||
* 4.51 Dec 23, 1998 -- Jens Axboe <axboe@image.dk>
|
||
* - ide_cdrom_reset enabled since the ide subsystem
|
||
* handles resets fine now. <axboe@image.dk>
|
||
* - Transfer size fix for Samsung CD-ROMs, thanks to
|
||
* "Ville Hallik" <ville.hallik@mail.ee>.
|
||
* - other minor stuff.
|
||
*
|
||
* 4.52 Jan 19, 1999 -- Jens Axboe <axboe@image.dk>
|
||
* - Detect DVD-ROM/RAM drives
|
||
*
|
||
* 4.53 Feb 22, 1999 - Include other model Samsung and one Goldstar
|
||
* drive in transfer size limit.
|
||
* - Fix the I/O error when doing eject without a medium
|
||
* loaded on some drives.
|
||
* - CDROMREADMODE2 is now implemented through
|
||
* CDROMREADRAW, since many drives don't support
|
||
* MODE2 (even though ATAPI 2.6 says they must).
|
||
* - Added ignore parameter to ide-cd (as a module), eg
|
||
* insmod ide-cd ignore='hda hdb'
|
||
* Useful when using ide-cd in conjunction with
|
||
* ide-scsi. TODO: non-modular way of doing the
|
||
* same.
|
||
*
|
||
* 4.54 Aug 5, 1999 - Support for MMC2 class commands through the generic
|
||
* packet interface to cdrom.c.
|
||
* - Unified audio ioctl support, most of it.
|
||
* - cleaned up various deprecated verify_area().
|
||
* - Added ide_cdrom_packet() as the interface for
|
||
* the Uniform generic_packet().
|
||
* - bunch of other stuff, will fill in logs later.
|
||
* - report 1 slot for non-changers, like the other
|
||
* cd-rom drivers. don't report select disc for
|
||
* non-changers as well.
|
||
* - mask out audio playing, if the device can't do it.
|
||
*
|
||
* 4.55 Sep 1, 1999 - Eliminated the rest of the audio ioctls, except
|
||
* for CDROMREADTOC[ENTRY|HEADER]. Some of the drivers
|
||
* use this independently of the actual audio handling.
|
||
* They will disappear later when I get the time to
|
||
* do it cleanly.
|
||
* - Minimize the TOC reading - only do it when we
|
||
* know a media change has occurred.
|
||
* - Moved all the CDROMREADx ioctls to the Uniform layer.
|
||
* - Heiko Eissfeldt <heiko@colossus.escape.de> supplied
|
||
* some fixes for CDI.
|
||
* - CD-ROM leaving door locked fix from Andries
|
||
* Brouwer <Andries.Brouwer@cwi.nl>
|
||
* - Erik Andersen <andersen@xmission.com> unified
|
||
* commands across the various drivers and how
|
||
* sense errors are handled.
|
||
*
|
||
* 4.56 Sep 12, 1999 - Removed changer support - it is now in the
|
||
* Uniform layer.
|
||
* - Added partition based multisession handling.
|
||
* - Mode sense and mode select moved to the
|
||
* Uniform layer.
|
||
* - Fixed a problem with WPI CDS-32X drive - it
|
||
* failed the capabilities
|
||
*
|
||
* 4.57 Apr 7, 2000 - Fixed sense reporting.
|
||
* - Fixed possible oops in ide_cdrom_get_last_session()
|
||
* - Fix locking mania and make ide_cdrom_reset relock
|
||
* - Stop spewing errors to log when magicdev polls with
|
||
* TEST_UNIT_READY on some drives.
|
||
* - Various fixes from Tobias Ringstrom:
|
||
* tray if it was locked prior to the reset.
|
||
* - cdrom_read_capacity returns one frame too little.
|
||
* - Fix real capacity reporting.
|
||
*
|
||
* 4.58 May 1, 2000 - Clean up ACER50 stuff.
|
||
* - Fix small problem with ide_cdrom_capacity
|
||
*
|
||
* 4.59 Aug 11, 2000 - Fix changer problem in cdrom_read_toc, we weren't
|
||
* correctly sensing a disc change.
|
||
* - Rearranged some code
|
||
* - Use extended sense on drives that support it for
|
||
* correctly reporting tray status -- from
|
||
* Michael D Johnson <johnsom@orst.edu>
|
||
* 4.60 Dec 17, 2003 - Add mt rainier support
|
||
* - Bump timeout for packet commands, matches sr
|
||
* - Odd stuff
|
||
* 4.61 Jan 22, 2004 - support hardware sector sizes other than 2kB,
|
||
* Pascal Schmidt <der.eremit@email.de>
|
||
*
|
||
*************************************************************************/
|
||
|
||
#define IDECD_VERSION "4.61"
|
||
|
||
#include <linux/config.h>
|
||
#include <linux/module.h>
|
||
#include <linux/types.h>
|
||
#include <linux/kernel.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/timer.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/errno.h>
|
||
#include <linux/cdrom.h>
|
||
#include <linux/ide.h>
|
||
#include <linux/completion.h>
|
||
|
||
#include <scsi/scsi.h> /* For SCSI -> ATAPI command conversion */
|
||
|
||
#include <asm/irq.h>
|
||
#include <asm/io.h>
|
||
#include <asm/byteorder.h>
|
||
#include <asm/uaccess.h>
|
||
#include <asm/unaligned.h>
|
||
|
||
#include "ide-cd.h"
|
||
|
||
static DECLARE_MUTEX(idecd_ref_sem);
|
||
|
||
#define to_ide_cd(obj) container_of(obj, struct cdrom_info, kref)
|
||
|
||
#define ide_cd_g(disk) \
|
||
container_of((disk)->private_data, struct cdrom_info, driver)
|
||
|
||
static struct cdrom_info *ide_cd_get(struct gendisk *disk)
|
||
{
|
||
struct cdrom_info *cd = NULL;
|
||
|
||
down(&idecd_ref_sem);
|
||
cd = ide_cd_g(disk);
|
||
if (cd)
|
||
kref_get(&cd->kref);
|
||
up(&idecd_ref_sem);
|
||
return cd;
|
||
}
|
||
|
||
static void ide_cd_release(struct kref *);
|
||
|
||
static void ide_cd_put(struct cdrom_info *cd)
|
||
{
|
||
down(&idecd_ref_sem);
|
||
kref_put(&cd->kref, ide_cd_release);
|
||
up(&idecd_ref_sem);
|
||
}
|
||
|
||
/****************************************************************************
|
||
* Generic packet command support and error handling routines.
|
||
*/
|
||
|
||
/* Mark that we've seen a media change, and invalidate our internal
|
||
buffers. */
|
||
static void cdrom_saw_media_change (ide_drive_t *drive)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
CDROM_STATE_FLAGS (drive)->media_changed = 1;
|
||
CDROM_STATE_FLAGS (drive)->toc_valid = 0;
|
||
info->nsectors_buffered = 0;
|
||
}
|
||
|
||
static int cdrom_log_sense(ide_drive_t *drive, struct request *rq,
|
||
struct request_sense *sense)
|
||
{
|
||
int log = 0;
|
||
|
||
if (!sense || !rq || (rq->flags & REQ_QUIET))
|
||
return 0;
|
||
|
||
switch (sense->sense_key) {
|
||
case NO_SENSE: case RECOVERED_ERROR:
|
||
break;
|
||
case NOT_READY:
|
||
/*
|
||
* don't care about tray state messages for
|
||
* e.g. capacity commands or in-progress or
|
||
* becoming ready
|
||
*/
|
||
if (sense->asc == 0x3a || sense->asc == 0x04)
|
||
break;
|
||
log = 1;
|
||
break;
|
||
case ILLEGAL_REQUEST:
|
||
/*
|
||
* don't log START_STOP unit with LoEj set, since
|
||
* we cannot reliably check if drive can auto-close
|
||
*/
|
||
if (rq->cmd[0] == GPCMD_START_STOP_UNIT && sense->asc == 0x24)
|
||
log = 0;
|
||
break;
|
||
case UNIT_ATTENTION:
|
||
/*
|
||
* Make good and sure we've seen this potential media
|
||
* change. Some drives (i.e. Creative) fail to present
|
||
* the correct sense key in the error register.
|
||
*/
|
||
cdrom_saw_media_change(drive);
|
||
break;
|
||
default:
|
||
log = 1;
|
||
break;
|
||
}
|
||
return log;
|
||
}
|
||
|
||
static
|
||
void cdrom_analyze_sense_data(ide_drive_t *drive,
|
||
struct request *failed_command,
|
||
struct request_sense *sense)
|
||
{
|
||
if (!cdrom_log_sense(drive, failed_command, sense))
|
||
return;
|
||
|
||
/*
|
||
* If a read toc is executed for a CD-R or CD-RW medium where
|
||
* the first toc has not been recorded yet, it will fail with
|
||
* 05/24/00 (which is a confusing error)
|
||
*/
|
||
if (failed_command && failed_command->cmd[0] == GPCMD_READ_TOC_PMA_ATIP)
|
||
if (sense->sense_key == 0x05 && sense->asc == 0x24)
|
||
return;
|
||
|
||
#if VERBOSE_IDE_CD_ERRORS
|
||
{
|
||
int i;
|
||
const char *s = "bad sense key!";
|
||
char buf[80];
|
||
|
||
printk ("ATAPI device %s:\n", drive->name);
|
||
if (sense->error_code==0x70)
|
||
printk(" Error: ");
|
||
else if (sense->error_code==0x71)
|
||
printk(" Deferred Error: ");
|
||
else if (sense->error_code == 0x7f)
|
||
printk(" Vendor-specific Error: ");
|
||
else
|
||
printk(" Unknown Error Type: ");
|
||
|
||
if (sense->sense_key < ARY_LEN(sense_key_texts))
|
||
s = sense_key_texts[sense->sense_key];
|
||
|
||
printk("%s -- (Sense key=0x%02x)\n", s, sense->sense_key);
|
||
|
||
if (sense->asc == 0x40) {
|
||
sprintf(buf, "Diagnostic failure on component 0x%02x",
|
||
sense->ascq);
|
||
s = buf;
|
||
} else {
|
||
int lo = 0, mid, hi = ARY_LEN(sense_data_texts);
|
||
unsigned long key = (sense->sense_key << 16);
|
||
key |= (sense->asc << 8);
|
||
if (!(sense->ascq >= 0x80 && sense->ascq <= 0xdd))
|
||
key |= sense->ascq;
|
||
s = NULL;
|
||
|
||
while (hi > lo) {
|
||
mid = (lo + hi) / 2;
|
||
if (sense_data_texts[mid].asc_ascq == key ||
|
||
sense_data_texts[mid].asc_ascq == (0xff0000|key)) {
|
||
s = sense_data_texts[mid].text;
|
||
break;
|
||
}
|
||
else if (sense_data_texts[mid].asc_ascq > key)
|
||
hi = mid;
|
||
else
|
||
lo = mid+1;
|
||
}
|
||
}
|
||
|
||
if (s == NULL) {
|
||
if (sense->asc > 0x80)
|
||
s = "(vendor-specific error)";
|
||
else
|
||
s = "(reserved error code)";
|
||
}
|
||
|
||
printk(KERN_ERR " %s -- (asc=0x%02x, ascq=0x%02x)\n",
|
||
s, sense->asc, sense->ascq);
|
||
|
||
if (failed_command != NULL) {
|
||
|
||
int lo=0, mid, hi= ARY_LEN (packet_command_texts);
|
||
s = NULL;
|
||
|
||
while (hi > lo) {
|
||
mid = (lo + hi) / 2;
|
||
if (packet_command_texts[mid].packet_command ==
|
||
failed_command->cmd[0]) {
|
||
s = packet_command_texts[mid].text;
|
||
break;
|
||
}
|
||
if (packet_command_texts[mid].packet_command >
|
||
failed_command->cmd[0])
|
||
hi = mid;
|
||
else
|
||
lo = mid+1;
|
||
}
|
||
|
||
printk (KERN_ERR " The failed \"%s\" packet command was: \n \"", s);
|
||
for (i=0; i<sizeof (failed_command->cmd); i++)
|
||
printk ("%02x ", failed_command->cmd[i]);
|
||
printk ("\"\n");
|
||
}
|
||
|
||
/* The SKSV bit specifies validity of the sense_key_specific
|
||
* in the next two commands. It is bit 7 of the first byte.
|
||
* In the case of NOT_READY, if SKSV is set the drive can
|
||
* give us nice ETA readings.
|
||
*/
|
||
if (sense->sense_key == NOT_READY && (sense->sks[0] & 0x80)) {
|
||
int progress = (sense->sks[1] << 8 | sense->sks[2]) * 100;
|
||
printk(KERN_ERR " Command is %02d%% complete\n", progress / 0xffff);
|
||
|
||
}
|
||
|
||
if (sense->sense_key == ILLEGAL_REQUEST &&
|
||
(sense->sks[0] & 0x80) != 0) {
|
||
printk(KERN_ERR " Error in %s byte %d",
|
||
(sense->sks[0] & 0x40) != 0 ?
|
||
"command packet" : "command data",
|
||
(sense->sks[1] << 8) + sense->sks[2]);
|
||
|
||
if ((sense->sks[0] & 0x40) != 0)
|
||
printk (" bit %d", sense->sks[0] & 0x07);
|
||
|
||
printk ("\n");
|
||
}
|
||
}
|
||
|
||
#else /* not VERBOSE_IDE_CD_ERRORS */
|
||
|
||
/* Suppress printing unit attention and `in progress of becoming ready'
|
||
errors when we're not being verbose. */
|
||
|
||
if (sense->sense_key == UNIT_ATTENTION ||
|
||
(sense->sense_key == NOT_READY && (sense->asc == 4 ||
|
||
sense->asc == 0x3a)))
|
||
return;
|
||
|
||
printk(KERN_ERR "%s: error code: 0x%02x sense_key: 0x%02x asc: 0x%02x ascq: 0x%02x\n",
|
||
drive->name,
|
||
sense->error_code, sense->sense_key,
|
||
sense->asc, sense->ascq);
|
||
#endif /* not VERBOSE_IDE_CD_ERRORS */
|
||
}
|
||
|
||
/*
|
||
* Initialize a ide-cd packet command request
|
||
*/
|
||
static void cdrom_prepare_request(ide_drive_t *drive, struct request *rq)
|
||
{
|
||
struct cdrom_info *cd = drive->driver_data;
|
||
|
||
ide_init_drive_cmd(rq);
|
||
rq->flags = REQ_PC;
|
||
rq->rq_disk = cd->disk;
|
||
}
|
||
|
||
static void cdrom_queue_request_sense(ide_drive_t *drive, void *sense,
|
||
struct request *failed_command)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct request *rq = &info->request_sense_request;
|
||
|
||
if (sense == NULL)
|
||
sense = &info->sense_data;
|
||
|
||
/* stuff the sense request in front of our current request */
|
||
cdrom_prepare_request(drive, rq);
|
||
|
||
rq->data = sense;
|
||
rq->cmd[0] = GPCMD_REQUEST_SENSE;
|
||
rq->cmd[4] = rq->data_len = 18;
|
||
|
||
rq->flags = REQ_SENSE;
|
||
|
||
/* NOTE! Save the failed command in "rq->buffer" */
|
||
rq->buffer = (void *) failed_command;
|
||
|
||
(void) ide_do_drive_cmd(drive, rq, ide_preempt);
|
||
}
|
||
|
||
static void cdrom_end_request (ide_drive_t *drive, int uptodate)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
int nsectors = rq->hard_cur_sectors;
|
||
|
||
if ((rq->flags & REQ_SENSE) && uptodate) {
|
||
/*
|
||
* For REQ_SENSE, "rq->buffer" points to the original failed
|
||
* request
|
||
*/
|
||
struct request *failed = (struct request *) rq->buffer;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
void *sense = &info->sense_data;
|
||
unsigned long flags;
|
||
|
||
if (failed) {
|
||
if (failed->sense) {
|
||
sense = failed->sense;
|
||
failed->sense_len = rq->sense_len;
|
||
}
|
||
|
||
/*
|
||
* now end failed request
|
||
*/
|
||
spin_lock_irqsave(&ide_lock, flags);
|
||
end_that_request_chunk(failed, 0, failed->data_len);
|
||
end_that_request_last(failed);
|
||
spin_unlock_irqrestore(&ide_lock, flags);
|
||
}
|
||
|
||
cdrom_analyze_sense_data(drive, failed, sense);
|
||
}
|
||
|
||
if (!rq->current_nr_sectors && blk_fs_request(rq))
|
||
uptodate = 1;
|
||
/* make sure it's fully ended */
|
||
if (blk_pc_request(rq))
|
||
nsectors = (rq->data_len + 511) >> 9;
|
||
if (!nsectors)
|
||
nsectors = 1;
|
||
|
||
ide_end_request(drive, uptodate, nsectors);
|
||
}
|
||
|
||
/* Returns 0 if the request should be continued.
|
||
Returns 1 if the request was ended. */
|
||
static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
int stat, err, sense_key;
|
||
|
||
/* Check for errors. */
|
||
stat = HWIF(drive)->INB(IDE_STATUS_REG);
|
||
if (stat_ret)
|
||
*stat_ret = stat;
|
||
|
||
if (OK_STAT(stat, good_stat, BAD_R_STAT))
|
||
return 0;
|
||
|
||
/* Get the IDE error register. */
|
||
err = HWIF(drive)->INB(IDE_ERROR_REG);
|
||
sense_key = err >> 4;
|
||
|
||
if (rq == NULL) {
|
||
printk("%s: missing rq in cdrom_decode_status\n", drive->name);
|
||
return 1;
|
||
}
|
||
|
||
if (rq->flags & REQ_SENSE) {
|
||
/* We got an error trying to get sense info
|
||
from the drive (probably while trying
|
||
to recover from a former error). Just give up. */
|
||
|
||
rq->flags |= REQ_FAILED;
|
||
cdrom_end_request(drive, 0);
|
||
ide_error(drive, "request sense failure", stat);
|
||
return 1;
|
||
|
||
} else if (rq->flags & (REQ_PC | REQ_BLOCK_PC)) {
|
||
/* All other functions, except for READ. */
|
||
unsigned long flags;
|
||
|
||
/*
|
||
* if we have an error, pass back CHECK_CONDITION as the
|
||
* scsi status byte
|
||
*/
|
||
if ((rq->flags & REQ_BLOCK_PC) && !rq->errors)
|
||
rq->errors = SAM_STAT_CHECK_CONDITION;
|
||
|
||
/* Check for tray open. */
|
||
if (sense_key == NOT_READY) {
|
||
cdrom_saw_media_change (drive);
|
||
} else if (sense_key == UNIT_ATTENTION) {
|
||
/* Check for media change. */
|
||
cdrom_saw_media_change (drive);
|
||
/*printk("%s: media changed\n",drive->name);*/
|
||
return 0;
|
||
} else if (!(rq->flags & REQ_QUIET)) {
|
||
/* Otherwise, print an error. */
|
||
ide_dump_status(drive, "packet command error", stat);
|
||
}
|
||
|
||
rq->flags |= REQ_FAILED;
|
||
|
||
/*
|
||
* instead of playing games with moving completions around,
|
||
* remove failed request completely and end it when the
|
||
* request sense has completed
|
||
*/
|
||
if (stat & ERR_STAT) {
|
||
spin_lock_irqsave(&ide_lock, flags);
|
||
blkdev_dequeue_request(rq);
|
||
HWGROUP(drive)->rq = NULL;
|
||
spin_unlock_irqrestore(&ide_lock, flags);
|
||
|
||
cdrom_queue_request_sense(drive, rq->sense, rq);
|
||
} else
|
||
cdrom_end_request(drive, 0);
|
||
|
||
} else if (blk_fs_request(rq)) {
|
||
int do_end_request = 0;
|
||
|
||
/* Handle errors from READ and WRITE requests. */
|
||
|
||
if (blk_noretry_request(rq))
|
||
do_end_request = 1;
|
||
|
||
if (sense_key == NOT_READY) {
|
||
/* Tray open. */
|
||
if (rq_data_dir(rq) == READ) {
|
||
cdrom_saw_media_change (drive);
|
||
|
||
/* Fail the request. */
|
||
printk ("%s: tray open\n", drive->name);
|
||
do_end_request = 1;
|
||
} else {
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
/* allow the drive 5 seconds to recover, some
|
||
* devices will return this error while flushing
|
||
* data from cache */
|
||
if (!rq->errors)
|
||
info->write_timeout = jiffies + ATAPI_WAIT_WRITE_BUSY;
|
||
rq->errors = 1;
|
||
if (time_after(jiffies, info->write_timeout))
|
||
do_end_request = 1;
|
||
else {
|
||
unsigned long flags;
|
||
|
||
/*
|
||
* take a breather relying on the
|
||
* unplug timer to kick us again
|
||
*/
|
||
spin_lock_irqsave(&ide_lock, flags);
|
||
blk_plug_device(drive->queue);
|
||
spin_unlock_irqrestore(&ide_lock,flags);
|
||
return 1;
|
||
}
|
||
}
|
||
} else if (sense_key == UNIT_ATTENTION) {
|
||
/* Media change. */
|
||
cdrom_saw_media_change (drive);
|
||
|
||
/* Arrange to retry the request.
|
||
But be sure to give up if we've retried
|
||
too many times. */
|
||
if (++rq->errors > ERROR_MAX)
|
||
do_end_request = 1;
|
||
} else if (sense_key == ILLEGAL_REQUEST ||
|
||
sense_key == DATA_PROTECT) {
|
||
/* No point in retrying after an illegal
|
||
request or data protect error.*/
|
||
ide_dump_status (drive, "command error", stat);
|
||
do_end_request = 1;
|
||
} else if (sense_key == MEDIUM_ERROR) {
|
||
/* No point in re-trying a zillion times on a bad
|
||
* sector... If we got here the error is not correctable */
|
||
ide_dump_status (drive, "media error (bad sector)", stat);
|
||
do_end_request = 1;
|
||
} else if (sense_key == BLANK_CHECK) {
|
||
/* Disk appears blank ?? */
|
||
ide_dump_status (drive, "media error (blank)", stat);
|
||
do_end_request = 1;
|
||
} else if ((err & ~ABRT_ERR) != 0) {
|
||
/* Go to the default handler
|
||
for other errors. */
|
||
ide_error(drive, "cdrom_decode_status", stat);
|
||
return 1;
|
||
} else if ((++rq->errors > ERROR_MAX)) {
|
||
/* We've racked up too many retries. Abort. */
|
||
do_end_request = 1;
|
||
}
|
||
|
||
if (do_end_request)
|
||
cdrom_end_request(drive, 0);
|
||
|
||
/* If we got a CHECK_CONDITION status,
|
||
queue a request sense command. */
|
||
if ((stat & ERR_STAT) != 0)
|
||
cdrom_queue_request_sense(drive, NULL, NULL);
|
||
} else {
|
||
blk_dump_rq_flags(rq, "ide-cd: bad rq");
|
||
cdrom_end_request(drive, 0);
|
||
}
|
||
|
||
/* Retry, or handle the next request. */
|
||
return 1;
|
||
}
|
||
|
||
static int cdrom_timer_expiry(ide_drive_t *drive)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
unsigned long wait = 0;
|
||
|
||
/*
|
||
* Some commands are *slow* and normally take a long time to
|
||
* complete. Usually we can use the ATAPI "disconnect" to bypass
|
||
* this, but not all commands/drives support that. Let
|
||
* ide_timer_expiry keep polling us for these.
|
||
*/
|
||
switch (rq->cmd[0]) {
|
||
case GPCMD_BLANK:
|
||
case GPCMD_FORMAT_UNIT:
|
||
case GPCMD_RESERVE_RZONE_TRACK:
|
||
case GPCMD_CLOSE_TRACK:
|
||
case GPCMD_FLUSH_CACHE:
|
||
wait = ATAPI_WAIT_PC;
|
||
break;
|
||
default:
|
||
if (!(rq->flags & REQ_QUIET))
|
||
printk(KERN_INFO "ide-cd: cmd 0x%x timed out\n", rq->cmd[0]);
|
||
wait = 0;
|
||
break;
|
||
}
|
||
return wait;
|
||
}
|
||
|
||
/* Set up the device registers for transferring a packet command on DEV,
|
||
expecting to later transfer XFERLEN bytes. HANDLER is the routine
|
||
which actually transfers the command to the drive. If this is a
|
||
drq_interrupt device, this routine will arrange for HANDLER to be
|
||
called when the interrupt from the drive arrives. Otherwise, HANDLER
|
||
will be called immediately after the drive is prepared for the transfer. */
|
||
|
||
static ide_startstop_t cdrom_start_packet_command(ide_drive_t *drive,
|
||
int xferlen,
|
||
ide_handler_t *handler)
|
||
{
|
||
ide_startstop_t startstop;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
ide_hwif_t *hwif = drive->hwif;
|
||
|
||
/* Wait for the controller to be idle. */
|
||
if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY))
|
||
return startstop;
|
||
|
||
if (info->dma)
|
||
info->dma = !hwif->dma_setup(drive);
|
||
|
||
/* Set up the controller registers. */
|
||
/* FIXME: for Virtual DMA we must check harder */
|
||
HWIF(drive)->OUTB(info->dma, IDE_FEATURE_REG);
|
||
HWIF(drive)->OUTB(0, IDE_IREASON_REG);
|
||
HWIF(drive)->OUTB(0, IDE_SECTOR_REG);
|
||
|
||
HWIF(drive)->OUTB(xferlen & 0xff, IDE_BCOUNTL_REG);
|
||
HWIF(drive)->OUTB(xferlen >> 8 , IDE_BCOUNTH_REG);
|
||
if (IDE_CONTROL_REG)
|
||
HWIF(drive)->OUTB(drive->ctl, IDE_CONTROL_REG);
|
||
|
||
if (CDROM_CONFIG_FLAGS (drive)->drq_interrupt) {
|
||
/* packet command */
|
||
ide_execute_command(drive, WIN_PACKETCMD, handler, ATAPI_WAIT_PC, cdrom_timer_expiry);
|
||
return ide_started;
|
||
} else {
|
||
unsigned long flags;
|
||
|
||
/* packet command */
|
||
spin_lock_irqsave(&ide_lock, flags);
|
||
hwif->OUTBSYNC(drive, WIN_PACKETCMD, IDE_COMMAND_REG);
|
||
ndelay(400);
|
||
spin_unlock_irqrestore(&ide_lock, flags);
|
||
|
||
return (*handler) (drive);
|
||
}
|
||
}
|
||
|
||
/* Send a packet command to DRIVE described by CMD_BUF and CMD_LEN.
|
||
The device registers must have already been prepared
|
||
by cdrom_start_packet_command.
|
||
HANDLER is the interrupt handler to call when the command completes
|
||
or there's data ready. */
|
||
/*
|
||
* changed 5 parameters to 3 for dvd-ram
|
||
* struct packet_command *pc; now packet_command_t *pc;
|
||
*/
|
||
#define ATAPI_MIN_CDB_BYTES 12
|
||
static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
|
||
struct request *rq,
|
||
ide_handler_t *handler)
|
||
{
|
||
ide_hwif_t *hwif = drive->hwif;
|
||
int cmd_len;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
ide_startstop_t startstop;
|
||
|
||
if (CDROM_CONFIG_FLAGS(drive)->drq_interrupt) {
|
||
/* Here we should have been called after receiving an interrupt
|
||
from the device. DRQ should how be set. */
|
||
|
||
/* Check for errors. */
|
||
if (cdrom_decode_status(drive, DRQ_STAT, NULL))
|
||
return ide_stopped;
|
||
} else {
|
||
/* Otherwise, we must wait for DRQ to get set. */
|
||
if (ide_wait_stat(&startstop, drive, DRQ_STAT,
|
||
BUSY_STAT, WAIT_READY))
|
||
return startstop;
|
||
}
|
||
|
||
/* Arm the interrupt handler. */
|
||
ide_set_handler(drive, handler, rq->timeout, cdrom_timer_expiry);
|
||
|
||
/* ATAPI commands get padded out to 12 bytes minimum */
|
||
cmd_len = COMMAND_SIZE(rq->cmd[0]);
|
||
if (cmd_len < ATAPI_MIN_CDB_BYTES)
|
||
cmd_len = ATAPI_MIN_CDB_BYTES;
|
||
|
||
/* Send the command to the device. */
|
||
HWIF(drive)->atapi_output_bytes(drive, rq->cmd, cmd_len);
|
||
|
||
/* Start the DMA if need be */
|
||
if (info->dma)
|
||
hwif->dma_start(drive);
|
||
|
||
return ide_started;
|
||
}
|
||
|
||
/****************************************************************************
|
||
* Block read functions.
|
||
*/
|
||
|
||
/*
|
||
* Buffer up to SECTORS_TO_TRANSFER sectors from the drive in our sector
|
||
* buffer. Once the first sector is added, any subsequent sectors are
|
||
* assumed to be continuous (until the buffer is cleared). For the first
|
||
* sector added, SECTOR is its sector number. (SECTOR is then ignored until
|
||
* the buffer is cleared.)
|
||
*/
|
||
static void cdrom_buffer_sectors (ide_drive_t *drive, unsigned long sector,
|
||
int sectors_to_transfer)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
/* Number of sectors to read into the buffer. */
|
||
int sectors_to_buffer = min_t(int, sectors_to_transfer,
|
||
(SECTOR_BUFFER_SIZE >> SECTOR_BITS) -
|
||
info->nsectors_buffered);
|
||
|
||
char *dest;
|
||
|
||
/* If we couldn't get a buffer, don't try to buffer anything... */
|
||
if (info->buffer == NULL)
|
||
sectors_to_buffer = 0;
|
||
|
||
/* If this is the first sector in the buffer, remember its number. */
|
||
if (info->nsectors_buffered == 0)
|
||
info->sector_buffered = sector;
|
||
|
||
/* Read the data into the buffer. */
|
||
dest = info->buffer + info->nsectors_buffered * SECTOR_SIZE;
|
||
while (sectors_to_buffer > 0) {
|
||
HWIF(drive)->atapi_input_bytes(drive, dest, SECTOR_SIZE);
|
||
--sectors_to_buffer;
|
||
--sectors_to_transfer;
|
||
++info->nsectors_buffered;
|
||
dest += SECTOR_SIZE;
|
||
}
|
||
|
||
/* Throw away any remaining data. */
|
||
while (sectors_to_transfer > 0) {
|
||
static char dum[SECTOR_SIZE];
|
||
HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum));
|
||
--sectors_to_transfer;
|
||
}
|
||
}
|
||
|
||
/*
|
||
* Check the contents of the interrupt reason register from the cdrom
|
||
* and attempt to recover if there are problems. Returns 0 if everything's
|
||
* ok; nonzero if the request has been terminated.
|
||
*/
|
||
static inline
|
||
int cdrom_read_check_ireason (ide_drive_t *drive, int len, int ireason)
|
||
{
|
||
if (ireason == 2)
|
||
return 0;
|
||
else if (ireason == 0) {
|
||
/* Whoops... The drive is expecting to receive data from us! */
|
||
printk(KERN_ERR "%s: read_intr: Drive wants to transfer data the "
|
||
"wrong way!\n", drive->name);
|
||
|
||
/* Throw some data at the drive so it doesn't hang
|
||
and quit this request. */
|
||
while (len > 0) {
|
||
int dum = 0;
|
||
HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof (dum));
|
||
len -= sizeof (dum);
|
||
}
|
||
} else if (ireason == 1) {
|
||
/* Some drives (ASUS) seem to tell us that status
|
||
* info is available. just get it and ignore.
|
||
*/
|
||
(void) HWIF(drive)->INB(IDE_STATUS_REG);
|
||
return 0;
|
||
} else {
|
||
/* Drive wants a command packet, or invalid ireason... */
|
||
printk(KERN_ERR "%s: read_intr: bad interrupt reason %x\n", drive->name,
|
||
ireason);
|
||
}
|
||
|
||
cdrom_end_request(drive, 0);
|
||
return -1;
|
||
}
|
||
|
||
/*
|
||
* Interrupt routine. Called when a read request has completed.
|
||
*/
|
||
static ide_startstop_t cdrom_read_intr (ide_drive_t *drive)
|
||
{
|
||
int stat;
|
||
int ireason, len, sectors_to_transfer, nskip;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
u8 lowcyl = 0, highcyl = 0;
|
||
int dma = info->dma, dma_error = 0;
|
||
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
|
||
/*
|
||
* handle dma case
|
||
*/
|
||
if (dma) {
|
||
info->dma = 0;
|
||
if ((dma_error = HWIF(drive)->ide_dma_end(drive)))
|
||
__ide_dma_off(drive);
|
||
}
|
||
|
||
if (cdrom_decode_status(drive, 0, &stat))
|
||
return ide_stopped;
|
||
|
||
if (dma) {
|
||
if (!dma_error) {
|
||
ide_end_request(drive, 1, rq->nr_sectors);
|
||
return ide_stopped;
|
||
} else
|
||
return ide_error(drive, "dma error", stat);
|
||
}
|
||
|
||
/* Read the interrupt reason and the transfer length. */
|
||
ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
|
||
lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
|
||
highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
|
||
|
||
len = lowcyl + (256 * highcyl);
|
||
|
||
/* If DRQ is clear, the command has completed. */
|
||
if ((stat & DRQ_STAT) == 0) {
|
||
/* If we're not done filling the current buffer, complain.
|
||
Otherwise, complete the command normally. */
|
||
if (rq->current_nr_sectors > 0) {
|
||
printk (KERN_ERR "%s: cdrom_read_intr: data underrun (%d blocks)\n",
|
||
drive->name, rq->current_nr_sectors);
|
||
rq->flags |= REQ_FAILED;
|
||
cdrom_end_request(drive, 0);
|
||
} else
|
||
cdrom_end_request(drive, 1);
|
||
return ide_stopped;
|
||
}
|
||
|
||
/* Check that the drive is expecting to do the same thing we are. */
|
||
if (cdrom_read_check_ireason (drive, len, ireason))
|
||
return ide_stopped;
|
||
|
||
/* Assume that the drive will always provide data in multiples
|
||
of at least SECTOR_SIZE, as it gets hairy to keep track
|
||
of the transfers otherwise. */
|
||
if ((len % SECTOR_SIZE) != 0) {
|
||
printk (KERN_ERR "%s: cdrom_read_intr: Bad transfer size %d\n",
|
||
drive->name, len);
|
||
if (CDROM_CONFIG_FLAGS(drive)->limit_nframes)
|
||
printk (KERN_ERR " This drive is not supported by this version of the driver\n");
|
||
else {
|
||
printk (KERN_ERR " Trying to limit transfer sizes\n");
|
||
CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
|
||
}
|
||
cdrom_end_request(drive, 0);
|
||
return ide_stopped;
|
||
}
|
||
|
||
/* The number of sectors we need to read from the drive. */
|
||
sectors_to_transfer = len / SECTOR_SIZE;
|
||
|
||
/* First, figure out if we need to bit-bucket
|
||
any of the leading sectors. */
|
||
nskip = min_t(int, rq->current_nr_sectors - bio_cur_sectors(rq->bio), sectors_to_transfer);
|
||
|
||
while (nskip > 0) {
|
||
/* We need to throw away a sector. */
|
||
static char dum[SECTOR_SIZE];
|
||
HWIF(drive)->atapi_input_bytes(drive, dum, sizeof (dum));
|
||
|
||
--rq->current_nr_sectors;
|
||
--nskip;
|
||
--sectors_to_transfer;
|
||
}
|
||
|
||
/* Now loop while we still have data to read from the drive. */
|
||
while (sectors_to_transfer > 0) {
|
||
int this_transfer;
|
||
|
||
/* If we've filled the present buffer but there's another
|
||
chained buffer after it, move on. */
|
||
if (rq->current_nr_sectors == 0 && rq->nr_sectors)
|
||
cdrom_end_request(drive, 1);
|
||
|
||
/* If the buffers are full, cache the rest of the data in our
|
||
internal buffer. */
|
||
if (rq->current_nr_sectors == 0) {
|
||
cdrom_buffer_sectors(drive, rq->sector, sectors_to_transfer);
|
||
sectors_to_transfer = 0;
|
||
} else {
|
||
/* Transfer data to the buffers.
|
||
Figure out how many sectors we can transfer
|
||
to the current buffer. */
|
||
this_transfer = min_t(int, sectors_to_transfer,
|
||
rq->current_nr_sectors);
|
||
|
||
/* Read this_transfer sectors
|
||
into the current buffer. */
|
||
while (this_transfer > 0) {
|
||
HWIF(drive)->atapi_input_bytes(drive, rq->buffer, SECTOR_SIZE);
|
||
rq->buffer += SECTOR_SIZE;
|
||
--rq->nr_sectors;
|
||
--rq->current_nr_sectors;
|
||
++rq->sector;
|
||
--this_transfer;
|
||
--sectors_to_transfer;
|
||
}
|
||
}
|
||
}
|
||
|
||
/* Done moving data! Wait for another interrupt. */
|
||
ide_set_handler(drive, &cdrom_read_intr, ATAPI_WAIT_PC, NULL);
|
||
return ide_started;
|
||
}
|
||
|
||
/*
|
||
* Try to satisfy some of the current read request from our cached data.
|
||
* Returns nonzero if the request has been completed, zero otherwise.
|
||
*/
|
||
static int cdrom_read_from_buffer (ide_drive_t *drive)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
unsigned short sectors_per_frame;
|
||
|
||
sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
|
||
|
||
/* Can't do anything if there's no buffer. */
|
||
if (info->buffer == NULL) return 0;
|
||
|
||
/* Loop while this request needs data and the next block is present
|
||
in our cache. */
|
||
while (rq->nr_sectors > 0 &&
|
||
rq->sector >= info->sector_buffered &&
|
||
rq->sector < info->sector_buffered + info->nsectors_buffered) {
|
||
if (rq->current_nr_sectors == 0)
|
||
cdrom_end_request(drive, 1);
|
||
|
||
memcpy (rq->buffer,
|
||
info->buffer +
|
||
(rq->sector - info->sector_buffered) * SECTOR_SIZE,
|
||
SECTOR_SIZE);
|
||
rq->buffer += SECTOR_SIZE;
|
||
--rq->current_nr_sectors;
|
||
--rq->nr_sectors;
|
||
++rq->sector;
|
||
}
|
||
|
||
/* If we've satisfied the current request,
|
||
terminate it successfully. */
|
||
if (rq->nr_sectors == 0) {
|
||
cdrom_end_request(drive, 1);
|
||
return -1;
|
||
}
|
||
|
||
/* Move on to the next buffer if needed. */
|
||
if (rq->current_nr_sectors == 0)
|
||
cdrom_end_request(drive, 1);
|
||
|
||
/* If this condition does not hold, then the kluge i use to
|
||
represent the number of sectors to skip at the start of a transfer
|
||
will fail. I think that this will never happen, but let's be
|
||
paranoid and check. */
|
||
if (rq->current_nr_sectors < bio_cur_sectors(rq->bio) &&
|
||
(rq->sector & (sectors_per_frame - 1))) {
|
||
printk(KERN_ERR "%s: cdrom_read_from_buffer: buffer botch (%ld)\n",
|
||
drive->name, (long)rq->sector);
|
||
cdrom_end_request(drive, 0);
|
||
return -1;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Routine to send a read packet command to the drive.
|
||
* This is usually called directly from cdrom_start_read.
|
||
* However, for drq_interrupt devices, it is called from an interrupt
|
||
* when the drive is ready to accept the command.
|
||
*/
|
||
static ide_startstop_t cdrom_start_read_continuation (ide_drive_t *drive)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
unsigned short sectors_per_frame;
|
||
int nskip;
|
||
|
||
sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
|
||
|
||
/* If the requested sector doesn't start on a cdrom block boundary,
|
||
we must adjust the start of the transfer so that it does,
|
||
and remember to skip the first few sectors.
|
||
If the CURRENT_NR_SECTORS field is larger than the size
|
||
of the buffer, it will mean that we're to skip a number
|
||
of sectors equal to the amount by which CURRENT_NR_SECTORS
|
||
is larger than the buffer size. */
|
||
nskip = rq->sector & (sectors_per_frame - 1);
|
||
if (nskip > 0) {
|
||
/* Sanity check... */
|
||
if (rq->current_nr_sectors != bio_cur_sectors(rq->bio) &&
|
||
(rq->sector & (sectors_per_frame - 1))) {
|
||
printk(KERN_ERR "%s: cdrom_start_read_continuation: buffer botch (%u)\n",
|
||
drive->name, rq->current_nr_sectors);
|
||
cdrom_end_request(drive, 0);
|
||
return ide_stopped;
|
||
}
|
||
rq->current_nr_sectors += nskip;
|
||
}
|
||
|
||
/* Set up the command */
|
||
rq->timeout = ATAPI_WAIT_PC;
|
||
|
||
/* Send the command to the drive and return. */
|
||
return cdrom_transfer_packet_command(drive, rq, &cdrom_read_intr);
|
||
}
|
||
|
||
|
||
#define IDECD_SEEK_THRESHOLD (1000) /* 1000 blocks */
|
||
#define IDECD_SEEK_TIMER (5 * WAIT_MIN_SLEEP) /* 100 ms */
|
||
#define IDECD_SEEK_TIMEOUT (2 * WAIT_CMD) /* 20 sec */
|
||
|
||
static ide_startstop_t cdrom_seek_intr (ide_drive_t *drive)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
int stat;
|
||
static int retry = 10;
|
||
|
||
if (cdrom_decode_status(drive, 0, &stat))
|
||
return ide_stopped;
|
||
CDROM_CONFIG_FLAGS(drive)->seeking = 1;
|
||
|
||
if (retry && time_after(jiffies, info->start_seek + IDECD_SEEK_TIMER)) {
|
||
if (--retry == 0) {
|
||
/*
|
||
* this condition is far too common, to bother
|
||
* users about it
|
||
*/
|
||
/* printk("%s: disabled DSC seek overlap\n", drive->name);*/
|
||
drive->dsc_overlap = 0;
|
||
}
|
||
}
|
||
return ide_stopped;
|
||
}
|
||
|
||
static ide_startstop_t cdrom_start_seek_continuation (ide_drive_t *drive)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
sector_t frame = rq->sector;
|
||
|
||
sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);
|
||
|
||
memset(rq->cmd, 0, sizeof(rq->cmd));
|
||
rq->cmd[0] = GPCMD_SEEK;
|
||
put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]);
|
||
|
||
rq->timeout = ATAPI_WAIT_PC;
|
||
return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
|
||
}
|
||
|
||
static ide_startstop_t cdrom_start_seek (ide_drive_t *drive, unsigned int block)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
info->dma = 0;
|
||
info->cmd = 0;
|
||
info->start_seek = jiffies;
|
||
return cdrom_start_packet_command(drive, 0, cdrom_start_seek_continuation);
|
||
}
|
||
|
||
/* Fix up a possibly partially-processed request so that we can
|
||
start it over entirely, or even put it back on the request queue. */
|
||
static void restore_request (struct request *rq)
|
||
{
|
||
if (rq->buffer != bio_data(rq->bio)) {
|
||
sector_t n = (rq->buffer - (char *) bio_data(rq->bio)) / SECTOR_SIZE;
|
||
|
||
rq->buffer = bio_data(rq->bio);
|
||
rq->nr_sectors += n;
|
||
rq->sector -= n;
|
||
}
|
||
rq->hard_cur_sectors = rq->current_nr_sectors = bio_cur_sectors(rq->bio);
|
||
rq->hard_nr_sectors = rq->nr_sectors;
|
||
rq->hard_sector = rq->sector;
|
||
rq->q->prep_rq_fn(rq->q, rq);
|
||
}
|
||
|
||
/*
|
||
* Start a read request from the CD-ROM.
|
||
*/
|
||
static ide_startstop_t cdrom_start_read (ide_drive_t *drive, unsigned int block)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
unsigned short sectors_per_frame;
|
||
|
||
sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
|
||
|
||
/* We may be retrying this request after an error. Fix up
|
||
any weirdness which might be present in the request packet. */
|
||
restore_request(rq);
|
||
|
||
/* Satisfy whatever we can of this request from our cached sector. */
|
||
if (cdrom_read_from_buffer(drive))
|
||
return ide_stopped;
|
||
|
||
blk_attempt_remerge(drive->queue, rq);
|
||
|
||
/* Clear the local sector buffer. */
|
||
info->nsectors_buffered = 0;
|
||
|
||
/* use dma, if possible. */
|
||
info->dma = drive->using_dma;
|
||
if ((rq->sector & (sectors_per_frame - 1)) ||
|
||
(rq->nr_sectors & (sectors_per_frame - 1)))
|
||
info->dma = 0;
|
||
|
||
info->cmd = READ;
|
||
|
||
/* Start sending the read request to the drive. */
|
||
return cdrom_start_packet_command(drive, 32768, cdrom_start_read_continuation);
|
||
}
|
||
|
||
/****************************************************************************
|
||
* Execute all other packet commands.
|
||
*/
|
||
|
||
/* Interrupt routine for packet command completion. */
|
||
static ide_startstop_t cdrom_pc_intr (ide_drive_t *drive)
|
||
{
|
||
int ireason, len, thislen;
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
u8 lowcyl = 0, highcyl = 0;
|
||
int stat;
|
||
|
||
/* Check for errors. */
|
||
if (cdrom_decode_status(drive, 0, &stat))
|
||
return ide_stopped;
|
||
|
||
/* Read the interrupt reason and the transfer length. */
|
||
ireason = HWIF(drive)->INB(IDE_IREASON_REG);
|
||
lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
|
||
highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
|
||
|
||
len = lowcyl + (256 * highcyl);
|
||
|
||
/* If DRQ is clear, the command has completed.
|
||
Complain if we still have data left to transfer. */
|
||
if ((stat & DRQ_STAT) == 0) {
|
||
/* Some of the trailing request sense fields are optional, and
|
||
some drives don't send them. Sigh. */
|
||
if (rq->cmd[0] == GPCMD_REQUEST_SENSE &&
|
||
rq->data_len > 0 &&
|
||
rq->data_len <= 5) {
|
||
while (rq->data_len > 0) {
|
||
*(unsigned char *)rq->data++ = 0;
|
||
--rq->data_len;
|
||
}
|
||
}
|
||
|
||
if (rq->data_len == 0)
|
||
cdrom_end_request(drive, 1);
|
||
else {
|
||
/* Comment this out, because this always happens
|
||
right after a reset occurs, and it is annoying to
|
||
always print expected stuff. */
|
||
/*
|
||
printk ("%s: cdrom_pc_intr: data underrun %d\n",
|
||
drive->name, pc->buflen);
|
||
*/
|
||
rq->flags |= REQ_FAILED;
|
||
cdrom_end_request(drive, 0);
|
||
}
|
||
return ide_stopped;
|
||
}
|
||
|
||
/* Figure out how much data to transfer. */
|
||
thislen = rq->data_len;
|
||
if (thislen > len) thislen = len;
|
||
|
||
/* The drive wants to be written to. */
|
||
if ((ireason & 3) == 0) {
|
||
if (!rq->data) {
|
||
blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
|
||
goto confused;
|
||
}
|
||
/* Transfer the data. */
|
||
HWIF(drive)->atapi_output_bytes(drive, rq->data, thislen);
|
||
|
||
/* If we haven't moved enough data to satisfy the drive,
|
||
add some padding. */
|
||
while (len > thislen) {
|
||
int dum = 0;
|
||
HWIF(drive)->atapi_output_bytes(drive, &dum, sizeof(dum));
|
||
len -= sizeof(dum);
|
||
}
|
||
|
||
/* Keep count of how much data we've moved. */
|
||
rq->data += thislen;
|
||
rq->data_len -= thislen;
|
||
}
|
||
|
||
/* Same drill for reading. */
|
||
else if ((ireason & 3) == 2) {
|
||
if (!rq->data) {
|
||
blk_dump_rq_flags(rq, "cdrom_pc_intr, write");
|
||
goto confused;
|
||
}
|
||
/* Transfer the data. */
|
||
HWIF(drive)->atapi_input_bytes(drive, rq->data, thislen);
|
||
|
||
/* If we haven't moved enough data to satisfy the drive,
|
||
add some padding. */
|
||
while (len > thislen) {
|
||
int dum = 0;
|
||
HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum));
|
||
len -= sizeof(dum);
|
||
}
|
||
|
||
/* Keep count of how much data we've moved. */
|
||
rq->data += thislen;
|
||
rq->data_len -= thislen;
|
||
|
||
if (rq->flags & REQ_SENSE)
|
||
rq->sense_len += thislen;
|
||
} else {
|
||
confused:
|
||
printk (KERN_ERR "%s: cdrom_pc_intr: The drive "
|
||
"appears confused (ireason = 0x%02x)\n",
|
||
drive->name, ireason);
|
||
rq->flags |= REQ_FAILED;
|
||
}
|
||
|
||
/* Now we wait for another interrupt. */
|
||
ide_set_handler(drive, &cdrom_pc_intr, ATAPI_WAIT_PC, cdrom_timer_expiry);
|
||
return ide_started;
|
||
}
|
||
|
||
static ide_startstop_t cdrom_do_pc_continuation (ide_drive_t *drive)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
|
||
if (!rq->timeout)
|
||
rq->timeout = ATAPI_WAIT_PC;
|
||
|
||
/* Send the command to the drive and return. */
|
||
return cdrom_transfer_packet_command(drive, rq, &cdrom_pc_intr);
|
||
}
|
||
|
||
|
||
static ide_startstop_t cdrom_do_packet_command (ide_drive_t *drive)
|
||
{
|
||
int len;
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
info->dma = 0;
|
||
info->cmd = 0;
|
||
rq->flags &= ~REQ_FAILED;
|
||
len = rq->data_len;
|
||
|
||
/* Start sending the command to the drive. */
|
||
return cdrom_start_packet_command(drive, len, cdrom_do_pc_continuation);
|
||
}
|
||
|
||
|
||
static
|
||
int cdrom_queue_packet_command(ide_drive_t *drive, struct request *rq)
|
||
{
|
||
struct request_sense sense;
|
||
int retries = 10;
|
||
unsigned int flags = rq->flags;
|
||
|
||
if (rq->sense == NULL)
|
||
rq->sense = &sense;
|
||
|
||
/* Start of retry loop. */
|
||
do {
|
||
int error;
|
||
unsigned long time = jiffies;
|
||
rq->flags = flags;
|
||
|
||
error = ide_do_drive_cmd(drive, rq, ide_wait);
|
||
time = jiffies - time;
|
||
|
||
/* FIXME: we should probably abort/retry or something
|
||
* in case of failure */
|
||
if (rq->flags & REQ_FAILED) {
|
||
/* The request failed. Retry if it was due to a unit
|
||
attention status
|
||
(usually means media was changed). */
|
||
struct request_sense *reqbuf = rq->sense;
|
||
|
||
if (reqbuf->sense_key == UNIT_ATTENTION)
|
||
cdrom_saw_media_change(drive);
|
||
else if (reqbuf->sense_key == NOT_READY &&
|
||
reqbuf->asc == 4 && reqbuf->ascq != 4) {
|
||
/* The drive is in the process of loading
|
||
a disk. Retry, but wait a little to give
|
||
the drive time to complete the load. */
|
||
ssleep(2);
|
||
} else {
|
||
/* Otherwise, don't retry. */
|
||
retries = 0;
|
||
}
|
||
--retries;
|
||
}
|
||
|
||
/* End of retry loop. */
|
||
} while ((rq->flags & REQ_FAILED) && retries >= 0);
|
||
|
||
/* Return an error if the command failed. */
|
||
return (rq->flags & REQ_FAILED) ? -EIO : 0;
|
||
}
|
||
|
||
/*
|
||
* Write handling
|
||
*/
|
||
static inline int cdrom_write_check_ireason(ide_drive_t *drive, int len, int ireason)
|
||
{
|
||
/* Two notes about IDE interrupt reason here - 0 means that
|
||
* the drive wants to receive data from us, 2 means that
|
||
* the drive is expecting to transfer data to us.
|
||
*/
|
||
if (ireason == 0)
|
||
return 0;
|
||
else if (ireason == 2) {
|
||
/* Whoops... The drive wants to send data. */
|
||
printk(KERN_ERR "%s: write_intr: wrong transfer direction!\n",
|
||
drive->name);
|
||
|
||
while (len > 0) {
|
||
int dum = 0;
|
||
HWIF(drive)->atapi_input_bytes(drive, &dum, sizeof(dum));
|
||
len -= sizeof(dum);
|
||
}
|
||
} else {
|
||
/* Drive wants a command packet, or invalid ireason... */
|
||
printk(KERN_ERR "%s: write_intr: bad interrupt reason %x\n",
|
||
drive->name, ireason);
|
||
}
|
||
|
||
cdrom_end_request(drive, 0);
|
||
return 1;
|
||
}
|
||
|
||
static void post_transform_command(struct request *req)
|
||
{
|
||
u8 *c = req->cmd;
|
||
char *ibuf;
|
||
|
||
if (!blk_pc_request(req))
|
||
return;
|
||
|
||
if (req->bio)
|
||
ibuf = bio_data(req->bio);
|
||
else
|
||
ibuf = req->data;
|
||
|
||
if (!ibuf)
|
||
return;
|
||
|
||
/*
|
||
* set ansi-revision and response data as atapi
|
||
*/
|
||
if (c[0] == GPCMD_INQUIRY) {
|
||
ibuf[2] |= 2;
|
||
ibuf[3] = (ibuf[3] & 0xf0) | 2;
|
||
}
|
||
}
|
||
|
||
typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
|
||
|
||
/*
|
||
* best way to deal with dma that is not sector aligned right now... note
|
||
* that in this path we are not using ->data or ->buffer at all. this irs
|
||
* can replace cdrom_pc_intr, cdrom_read_intr, and cdrom_write_intr in the
|
||
* future.
|
||
*/
|
||
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *drive)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
int dma_error, dma, stat, ireason, len, thislen;
|
||
u8 lowcyl, highcyl;
|
||
xfer_func_t *xferfunc;
|
||
unsigned long flags;
|
||
|
||
/* Check for errors. */
|
||
dma_error = 0;
|
||
dma = info->dma;
|
||
if (dma) {
|
||
info->dma = 0;
|
||
dma_error = HWIF(drive)->ide_dma_end(drive);
|
||
}
|
||
|
||
if (cdrom_decode_status(drive, 0, &stat))
|
||
return ide_stopped;
|
||
|
||
/*
|
||
* using dma, transfer is complete now
|
||
*/
|
||
if (dma) {
|
||
if (dma_error) {
|
||
printk(KERN_ERR "ide-cd: dma error\n");
|
||
__ide_dma_off(drive);
|
||
return ide_error(drive, "dma error", stat);
|
||
}
|
||
|
||
end_that_request_chunk(rq, 1, rq->data_len);
|
||
rq->data_len = 0;
|
||
goto end_request;
|
||
}
|
||
|
||
/*
|
||
* ok we fall to pio :/
|
||
*/
|
||
ireason = HWIF(drive)->INB(IDE_IREASON_REG) & 0x3;
|
||
lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
|
||
highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
|
||
|
||
len = lowcyl + (256 * highcyl);
|
||
thislen = rq->data_len;
|
||
if (thislen > len)
|
||
thislen = len;
|
||
|
||
/*
|
||
* If DRQ is clear, the command has completed.
|
||
*/
|
||
if ((stat & DRQ_STAT) == 0)
|
||
goto end_request;
|
||
|
||
/*
|
||
* check which way to transfer data
|
||
*/
|
||
if (rq_data_dir(rq) == WRITE) {
|
||
/*
|
||
* write to drive
|
||
*/
|
||
if (cdrom_write_check_ireason(drive, len, ireason))
|
||
return ide_stopped;
|
||
|
||
xferfunc = HWIF(drive)->atapi_output_bytes;
|
||
} else {
|
||
/*
|
||
* read from drive
|
||
*/
|
||
if (cdrom_read_check_ireason(drive, len, ireason))
|
||
return ide_stopped;
|
||
|
||
xferfunc = HWIF(drive)->atapi_input_bytes;
|
||
}
|
||
|
||
/*
|
||
* transfer data
|
||
*/
|
||
while (thislen > 0) {
|
||
int blen = blen = rq->data_len;
|
||
char *ptr = rq->data;
|
||
|
||
/*
|
||
* bio backed?
|
||
*/
|
||
if (rq->bio) {
|
||
ptr = bio_data(rq->bio);
|
||
blen = bio_iovec(rq->bio)->bv_len;
|
||
}
|
||
|
||
if (!ptr) {
|
||
printk(KERN_ERR "%s: confused, missing data\n", drive->name);
|
||
break;
|
||
}
|
||
|
||
if (blen > thislen)
|
||
blen = thislen;
|
||
|
||
xferfunc(drive, ptr, blen);
|
||
|
||
thislen -= blen;
|
||
len -= blen;
|
||
rq->data_len -= blen;
|
||
|
||
if (rq->bio)
|
||
end_that_request_chunk(rq, 1, blen);
|
||
else
|
||
rq->data += blen;
|
||
}
|
||
|
||
/*
|
||
* pad, if necessary
|
||
*/
|
||
if (len > 0) {
|
||
while (len > 0) {
|
||
int pad = 0;
|
||
|
||
xferfunc(drive, &pad, sizeof(pad));
|
||
len -= sizeof(pad);
|
||
}
|
||
}
|
||
|
||
if (HWGROUP(drive)->handler != NULL)
|
||
BUG();
|
||
|
||
ide_set_handler(drive, cdrom_newpc_intr, rq->timeout, NULL);
|
||
return ide_started;
|
||
|
||
end_request:
|
||
if (!rq->data_len)
|
||
post_transform_command(rq);
|
||
|
||
spin_lock_irqsave(&ide_lock, flags);
|
||
blkdev_dequeue_request(rq);
|
||
end_that_request_last(rq);
|
||
HWGROUP(drive)->rq = NULL;
|
||
spin_unlock_irqrestore(&ide_lock, flags);
|
||
return ide_stopped;
|
||
}
|
||
|
||
static ide_startstop_t cdrom_write_intr(ide_drive_t *drive)
|
||
{
|
||
int stat, ireason, len, sectors_to_transfer, uptodate;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
int dma_error = 0, dma = info->dma;
|
||
u8 lowcyl = 0, highcyl = 0;
|
||
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
|
||
/* Check for errors. */
|
||
if (dma) {
|
||
info->dma = 0;
|
||
if ((dma_error = HWIF(drive)->ide_dma_end(drive))) {
|
||
printk(KERN_ERR "ide-cd: write dma error\n");
|
||
__ide_dma_off(drive);
|
||
}
|
||
}
|
||
|
||
if (cdrom_decode_status(drive, 0, &stat))
|
||
return ide_stopped;
|
||
|
||
/*
|
||
* using dma, transfer is complete now
|
||
*/
|
||
if (dma) {
|
||
if (dma_error)
|
||
return ide_error(drive, "dma error", stat);
|
||
|
||
ide_end_request(drive, 1, rq->nr_sectors);
|
||
return ide_stopped;
|
||
}
|
||
|
||
/* Read the interrupt reason and the transfer length. */
|
||
ireason = HWIF(drive)->INB(IDE_IREASON_REG);
|
||
lowcyl = HWIF(drive)->INB(IDE_BCOUNTL_REG);
|
||
highcyl = HWIF(drive)->INB(IDE_BCOUNTH_REG);
|
||
|
||
len = lowcyl + (256 * highcyl);
|
||
|
||
/* If DRQ is clear, the command has completed. */
|
||
if ((stat & DRQ_STAT) == 0) {
|
||
/* If we're not done writing, complain.
|
||
* Otherwise, complete the command normally.
|
||
*/
|
||
uptodate = 1;
|
||
if (rq->current_nr_sectors > 0) {
|
||
printk(KERN_ERR "%s: write_intr: data underrun (%d blocks)\n",
|
||
drive->name, rq->current_nr_sectors);
|
||
uptodate = 0;
|
||
}
|
||
cdrom_end_request(drive, uptodate);
|
||
return ide_stopped;
|
||
}
|
||
|
||
/* Check that the drive is expecting to do the same thing we are. */
|
||
if (cdrom_write_check_ireason(drive, len, ireason))
|
||
return ide_stopped;
|
||
|
||
sectors_to_transfer = len / SECTOR_SIZE;
|
||
|
||
/*
|
||
* now loop and write out the data
|
||
*/
|
||
while (sectors_to_transfer > 0) {
|
||
int this_transfer;
|
||
|
||
if (!rq->current_nr_sectors) {
|
||
printk(KERN_ERR "ide-cd: write_intr: oops\n");
|
||
break;
|
||
}
|
||
|
||
/*
|
||
* Figure out how many sectors we can transfer
|
||
*/
|
||
this_transfer = min_t(int, sectors_to_transfer, rq->current_nr_sectors);
|
||
|
||
while (this_transfer > 0) {
|
||
HWIF(drive)->atapi_output_bytes(drive, rq->buffer, SECTOR_SIZE);
|
||
rq->buffer += SECTOR_SIZE;
|
||
--rq->nr_sectors;
|
||
--rq->current_nr_sectors;
|
||
++rq->sector;
|
||
--this_transfer;
|
||
--sectors_to_transfer;
|
||
}
|
||
|
||
/*
|
||
* current buffer complete, move on
|
||
*/
|
||
if (rq->current_nr_sectors == 0 && rq->nr_sectors)
|
||
cdrom_end_request(drive, 1);
|
||
}
|
||
|
||
/* re-arm handler */
|
||
ide_set_handler(drive, &cdrom_write_intr, ATAPI_WAIT_PC, NULL);
|
||
return ide_started;
|
||
}
|
||
|
||
static ide_startstop_t cdrom_start_write_cont(ide_drive_t *drive)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
|
||
#if 0 /* the immediate bit */
|
||
rq->cmd[1] = 1 << 3;
|
||
#endif
|
||
rq->timeout = ATAPI_WAIT_PC;
|
||
|
||
return cdrom_transfer_packet_command(drive, rq, cdrom_write_intr);
|
||
}
|
||
|
||
static ide_startstop_t cdrom_start_write(ide_drive_t *drive, struct request *rq)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct gendisk *g = info->disk;
|
||
unsigned short sectors_per_frame = queue_hardsect_size(drive->queue) >> SECTOR_BITS;
|
||
|
||
/*
|
||
* writes *must* be hardware frame aligned
|
||
*/
|
||
if ((rq->nr_sectors & (sectors_per_frame - 1)) ||
|
||
(rq->sector & (sectors_per_frame - 1))) {
|
||
cdrom_end_request(drive, 0);
|
||
return ide_stopped;
|
||
}
|
||
|
||
/*
|
||
* disk has become write protected
|
||
*/
|
||
if (g->policy) {
|
||
cdrom_end_request(drive, 0);
|
||
return ide_stopped;
|
||
}
|
||
|
||
/*
|
||
* for dvd-ram and such media, it's a really big deal to get
|
||
* big writes all the time. so scour the queue and attempt to
|
||
* remerge requests, often the plugging will not have had time
|
||
* to do this properly
|
||
*/
|
||
blk_attempt_remerge(drive->queue, rq);
|
||
|
||
info->nsectors_buffered = 0;
|
||
|
||
/* use dma, if possible. we don't need to check more, since we
|
||
* know that the transfer is always (at least!) frame aligned */
|
||
info->dma = drive->using_dma ? 1 : 0;
|
||
info->cmd = WRITE;
|
||
|
||
info->devinfo.media_written = 1;
|
||
|
||
/* Start sending the write request to the drive. */
|
||
return cdrom_start_packet_command(drive, 32768, cdrom_start_write_cont);
|
||
}
|
||
|
||
static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
|
||
{
|
||
struct request *rq = HWGROUP(drive)->rq;
|
||
|
||
if (!rq->timeout)
|
||
rq->timeout = ATAPI_WAIT_PC;
|
||
|
||
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
|
||
}
|
||
|
||
static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
rq->flags |= REQ_QUIET;
|
||
|
||
info->dma = 0;
|
||
info->cmd = 0;
|
||
|
||
/*
|
||
* sg request
|
||
*/
|
||
if (rq->bio) {
|
||
int mask = drive->queue->dma_alignment;
|
||
unsigned long addr = (unsigned long) page_address(bio_page(rq->bio));
|
||
|
||
info->cmd = rq_data_dir(rq);
|
||
info->dma = drive->using_dma;
|
||
|
||
/*
|
||
* check if dma is safe
|
||
*
|
||
* NOTE! The "len" and "addr" checks should possibly have
|
||
* separate masks.
|
||
*/
|
||
if ((rq->data_len & 15) || (addr & mask))
|
||
info->dma = 0;
|
||
}
|
||
|
||
/* Start sending the command to the drive. */
|
||
return cdrom_start_packet_command(drive, rq->data_len, cdrom_do_newpc_cont);
|
||
}
|
||
|
||
/****************************************************************************
|
||
* cdrom driver request routine.
|
||
*/
|
||
static ide_startstop_t
|
||
ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block)
|
||
{
|
||
ide_startstop_t action;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
if (blk_fs_request(rq)) {
|
||
if (CDROM_CONFIG_FLAGS(drive)->seeking) {
|
||
unsigned long elapsed = jiffies - info->start_seek;
|
||
int stat = HWIF(drive)->INB(IDE_STATUS_REG);
|
||
|
||
if ((stat & SEEK_STAT) != SEEK_STAT) {
|
||
if (elapsed < IDECD_SEEK_TIMEOUT) {
|
||
ide_stall_queue(drive, IDECD_SEEK_TIMER);
|
||
return ide_stopped;
|
||
}
|
||
printk (KERN_ERR "%s: DSC timeout\n", drive->name);
|
||
}
|
||
CDROM_CONFIG_FLAGS(drive)->seeking = 0;
|
||
}
|
||
if ((rq_data_dir(rq) == READ) && IDE_LARGE_SEEK(info->last_block, block, IDECD_SEEK_THRESHOLD) && drive->dsc_overlap) {
|
||
action = cdrom_start_seek(drive, block);
|
||
} else {
|
||
if (rq_data_dir(rq) == READ)
|
||
action = cdrom_start_read(drive, block);
|
||
else
|
||
action = cdrom_start_write(drive, rq);
|
||
}
|
||
info->last_block = block;
|
||
return action;
|
||
} else if (rq->flags & (REQ_PC | REQ_SENSE)) {
|
||
return cdrom_do_packet_command(drive);
|
||
} else if (rq->flags & REQ_BLOCK_PC) {
|
||
return cdrom_do_block_pc(drive, rq);
|
||
} else if (rq->flags & REQ_SPECIAL) {
|
||
/*
|
||
* right now this can only be a reset...
|
||
*/
|
||
cdrom_end_request(drive, 1);
|
||
return ide_stopped;
|
||
}
|
||
|
||
blk_dump_rq_flags(rq, "ide-cd bad flags");
|
||
cdrom_end_request(drive, 0);
|
||
return ide_stopped;
|
||
}
|
||
|
||
|
||
|
||
/****************************************************************************
|
||
* Ioctl handling.
|
||
*
|
||
* Routines which queue packet commands take as a final argument a pointer
|
||
* to a request_sense struct. If execution of the command results
|
||
* in an error with a CHECK CONDITION status, this structure will be filled
|
||
* with the results of the subsequent request sense command. The pointer
|
||
* can also be NULL, in which case no sense information is returned.
|
||
*/
|
||
|
||
#if ! STANDARD_ATAPI
|
||
static inline
|
||
int bin2bcd (int x)
|
||
{
|
||
return (x%10) | ((x/10) << 4);
|
||
}
|
||
|
||
|
||
static inline
|
||
int bcd2bin (int x)
|
||
{
|
||
return (x >> 4) * 10 + (x & 0x0f);
|
||
}
|
||
|
||
static
|
||
void msf_from_bcd (struct atapi_msf *msf)
|
||
{
|
||
msf->minute = bcd2bin (msf->minute);
|
||
msf->second = bcd2bin (msf->second);
|
||
msf->frame = bcd2bin (msf->frame);
|
||
}
|
||
|
||
#endif /* not STANDARD_ATAPI */
|
||
|
||
|
||
static inline
|
||
void lba_to_msf (int lba, byte *m, byte *s, byte *f)
|
||
{
|
||
lba += CD_MSF_OFFSET;
|
||
lba &= 0xffffff; /* negative lbas use only 24 bits */
|
||
*m = lba / (CD_SECS * CD_FRAMES);
|
||
lba %= (CD_SECS * CD_FRAMES);
|
||
*s = lba / CD_FRAMES;
|
||
*f = lba % CD_FRAMES;
|
||
}
|
||
|
||
|
||
static inline
|
||
int msf_to_lba (byte m, byte s, byte f)
|
||
{
|
||
return (((m * CD_SECS) + s) * CD_FRAMES + f) - CD_MSF_OFFSET;
|
||
}
|
||
|
||
static int cdrom_check_status(ide_drive_t *drive, struct request_sense *sense)
|
||
{
|
||
struct request req;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct cdrom_device_info *cdi = &info->devinfo;
|
||
|
||
cdrom_prepare_request(drive, &req);
|
||
|
||
req.sense = sense;
|
||
req.cmd[0] = GPCMD_TEST_UNIT_READY;
|
||
req.flags |= REQ_QUIET;
|
||
|
||
#if ! STANDARD_ATAPI
|
||
/* the Sanyo 3 CD changer uses byte 7 of TEST_UNIT_READY to
|
||
switch CDs instead of supporting the LOAD_UNLOAD opcode */
|
||
|
||
req.cmd[7] = cdi->sanyo_slot % 3;
|
||
#endif /* not STANDARD_ATAPI */
|
||
|
||
return cdrom_queue_packet_command(drive, &req);
|
||
}
|
||
|
||
|
||
/* Lock the door if LOCKFLAG is nonzero; unlock it otherwise. */
|
||
static int
|
||
cdrom_lockdoor(ide_drive_t *drive, int lockflag, struct request_sense *sense)
|
||
{
|
||
struct request_sense my_sense;
|
||
struct request req;
|
||
int stat;
|
||
|
||
if (sense == NULL)
|
||
sense = &my_sense;
|
||
|
||
/* If the drive cannot lock the door, just pretend. */
|
||
if (CDROM_CONFIG_FLAGS(drive)->no_doorlock) {
|
||
stat = 0;
|
||
} else {
|
||
cdrom_prepare_request(drive, &req);
|
||
req.sense = sense;
|
||
req.cmd[0] = GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL;
|
||
req.cmd[4] = lockflag ? 1 : 0;
|
||
stat = cdrom_queue_packet_command(drive, &req);
|
||
}
|
||
|
||
/* If we got an illegal field error, the drive
|
||
probably cannot lock the door. */
|
||
if (stat != 0 &&
|
||
sense->sense_key == ILLEGAL_REQUEST &&
|
||
(sense->asc == 0x24 || sense->asc == 0x20)) {
|
||
printk (KERN_ERR "%s: door locking not supported\n",
|
||
drive->name);
|
||
CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
|
||
stat = 0;
|
||
}
|
||
|
||
/* no medium, that's alright. */
|
||
if (stat != 0 && sense->sense_key == NOT_READY && sense->asc == 0x3a)
|
||
stat = 0;
|
||
|
||
if (stat == 0)
|
||
CDROM_STATE_FLAGS(drive)->door_locked = lockflag;
|
||
|
||
return stat;
|
||
}
|
||
|
||
|
||
/* Eject the disk if EJECTFLAG is 0.
|
||
If EJECTFLAG is 1, try to reload the disk. */
|
||
static int cdrom_eject(ide_drive_t *drive, int ejectflag,
|
||
struct request_sense *sense)
|
||
{
|
||
struct request req;
|
||
char loej = 0x02;
|
||
|
||
if (CDROM_CONFIG_FLAGS(drive)->no_eject && !ejectflag)
|
||
return -EDRIVE_CANT_DO_THIS;
|
||
|
||
/* reload fails on some drives, if the tray is locked */
|
||
if (CDROM_STATE_FLAGS(drive)->door_locked && ejectflag)
|
||
return 0;
|
||
|
||
cdrom_prepare_request(drive, &req);
|
||
|
||
/* only tell drive to close tray if open, if it can do that */
|
||
if (ejectflag && !CDROM_CONFIG_FLAGS(drive)->close_tray)
|
||
loej = 0;
|
||
|
||
req.sense = sense;
|
||
req.cmd[0] = GPCMD_START_STOP_UNIT;
|
||
req.cmd[4] = loej | (ejectflag != 0);
|
||
return cdrom_queue_packet_command(drive, &req);
|
||
}
|
||
|
||
static int cdrom_read_capacity(ide_drive_t *drive, unsigned long *capacity,
|
||
unsigned long *sectors_per_frame,
|
||
struct request_sense *sense)
|
||
{
|
||
struct {
|
||
__u32 lba;
|
||
__u32 blocklen;
|
||
} capbuf;
|
||
|
||
int stat;
|
||
struct request req;
|
||
|
||
cdrom_prepare_request(drive, &req);
|
||
|
||
req.sense = sense;
|
||
req.cmd[0] = GPCMD_READ_CDVD_CAPACITY;
|
||
req.data = (char *)&capbuf;
|
||
req.data_len = sizeof(capbuf);
|
||
|
||
stat = cdrom_queue_packet_command(drive, &req);
|
||
if (stat == 0) {
|
||
*capacity = 1 + be32_to_cpu(capbuf.lba);
|
||
*sectors_per_frame =
|
||
be32_to_cpu(capbuf.blocklen) >> SECTOR_BITS;
|
||
}
|
||
|
||
return stat;
|
||
}
|
||
|
||
static int cdrom_read_tocentry(ide_drive_t *drive, int trackno, int msf_flag,
|
||
int format, char *buf, int buflen,
|
||
struct request_sense *sense)
|
||
{
|
||
struct request req;
|
||
|
||
cdrom_prepare_request(drive, &req);
|
||
|
||
req.sense = sense;
|
||
req.data = buf;
|
||
req.data_len = buflen;
|
||
req.flags |= REQ_QUIET;
|
||
req.cmd[0] = GPCMD_READ_TOC_PMA_ATIP;
|
||
req.cmd[6] = trackno;
|
||
req.cmd[7] = (buflen >> 8);
|
||
req.cmd[8] = (buflen & 0xff);
|
||
req.cmd[9] = (format << 6);
|
||
|
||
if (msf_flag)
|
||
req.cmd[1] = 2;
|
||
|
||
return cdrom_queue_packet_command(drive, &req);
|
||
}
|
||
|
||
|
||
/* Try to read the entire TOC for the disk into our internal buffer. */
|
||
static int cdrom_read_toc(ide_drive_t *drive, struct request_sense *sense)
|
||
{
|
||
int stat, ntracks, i;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct cdrom_device_info *cdi = &info->devinfo;
|
||
struct atapi_toc *toc = info->toc;
|
||
struct {
|
||
struct atapi_toc_header hdr;
|
||
struct atapi_toc_entry ent;
|
||
} ms_tmp;
|
||
long last_written;
|
||
unsigned long sectors_per_frame = SECTORS_PER_FRAME;
|
||
|
||
if (toc == NULL) {
|
||
/* Try to allocate space. */
|
||
toc = kmalloc(sizeof(struct atapi_toc), GFP_KERNEL);
|
||
if (toc == NULL) {
|
||
printk (KERN_ERR "%s: No cdrom TOC buffer!\n", drive->name);
|
||
return -ENOMEM;
|
||
}
|
||
info->toc = toc;
|
||
}
|
||
|
||
/* Check to see if the existing data is still valid.
|
||
If it is, just return. */
|
||
(void) cdrom_check_status(drive, sense);
|
||
|
||
if (CDROM_STATE_FLAGS(drive)->toc_valid)
|
||
return 0;
|
||
|
||
/* Try to get the total cdrom capacity and sector size. */
|
||
stat = cdrom_read_capacity(drive, &toc->capacity, §ors_per_frame,
|
||
sense);
|
||
if (stat)
|
||
toc->capacity = 0x1fffff;
|
||
|
||
set_capacity(info->disk, toc->capacity * sectors_per_frame);
|
||
blk_queue_hardsect_size(drive->queue,
|
||
sectors_per_frame << SECTOR_BITS);
|
||
|
||
/* First read just the header, so we know how long the TOC is. */
|
||
stat = cdrom_read_tocentry(drive, 0, 1, 0, (char *) &toc->hdr,
|
||
sizeof(struct atapi_toc_header), sense);
|
||
if (stat)
|
||
return stat;
|
||
|
||
#if ! STANDARD_ATAPI
|
||
if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
|
||
toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
|
||
toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
|
||
}
|
||
#endif /* not STANDARD_ATAPI */
|
||
|
||
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
|
||
if (ntracks <= 0)
|
||
return -EIO;
|
||
if (ntracks > MAX_TRACKS)
|
||
ntracks = MAX_TRACKS;
|
||
|
||
/* Now read the whole schmeer. */
|
||
stat = cdrom_read_tocentry(drive, toc->hdr.first_track, 1, 0,
|
||
(char *)&toc->hdr,
|
||
sizeof(struct atapi_toc_header) +
|
||
(ntracks + 1) *
|
||
sizeof(struct atapi_toc_entry), sense);
|
||
|
||
if (stat && toc->hdr.first_track > 1) {
|
||
/* Cds with CDI tracks only don't have any TOC entries,
|
||
despite of this the returned values are
|
||
first_track == last_track = number of CDI tracks + 1,
|
||
so that this case is indistinguishable from the same
|
||
layout plus an additional audio track.
|
||
If we get an error for the regular case, we assume
|
||
a CDI without additional audio tracks. In this case
|
||
the readable TOC is empty (CDI tracks are not included)
|
||
and only holds the Leadout entry. Heiko Ei<45>feldt */
|
||
ntracks = 0;
|
||
stat = cdrom_read_tocentry(drive, CDROM_LEADOUT, 1, 0,
|
||
(char *)&toc->hdr,
|
||
sizeof(struct atapi_toc_header) +
|
||
(ntracks + 1) *
|
||
sizeof(struct atapi_toc_entry),
|
||
sense);
|
||
if (stat) {
|
||
return stat;
|
||
}
|
||
#if ! STANDARD_ATAPI
|
||
if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
|
||
toc->hdr.first_track = bin2bcd(CDROM_LEADOUT);
|
||
toc->hdr.last_track = bin2bcd(CDROM_LEADOUT);
|
||
} else
|
||
#endif /* not STANDARD_ATAPI */
|
||
{
|
||
toc->hdr.first_track = CDROM_LEADOUT;
|
||
toc->hdr.last_track = CDROM_LEADOUT;
|
||
}
|
||
}
|
||
|
||
if (stat)
|
||
return stat;
|
||
|
||
toc->hdr.toc_length = ntohs (toc->hdr.toc_length);
|
||
|
||
#if ! STANDARD_ATAPI
|
||
if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd) {
|
||
toc->hdr.first_track = bcd2bin(toc->hdr.first_track);
|
||
toc->hdr.last_track = bcd2bin(toc->hdr.last_track);
|
||
}
|
||
#endif /* not STANDARD_ATAPI */
|
||
|
||
for (i=0; i<=ntracks; i++) {
|
||
#if ! STANDARD_ATAPI
|
||
if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) {
|
||
if (CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd)
|
||
toc->ent[i].track = bcd2bin(toc->ent[i].track);
|
||
msf_from_bcd(&toc->ent[i].addr.msf);
|
||
}
|
||
#endif /* not STANDARD_ATAPI */
|
||
toc->ent[i].addr.lba = msf_to_lba (toc->ent[i].addr.msf.minute,
|
||
toc->ent[i].addr.msf.second,
|
||
toc->ent[i].addr.msf.frame);
|
||
}
|
||
|
||
/* Read the multisession information. */
|
||
if (toc->hdr.first_track != CDROM_LEADOUT) {
|
||
/* Read the multisession information. */
|
||
stat = cdrom_read_tocentry(drive, 0, 0, 1, (char *)&ms_tmp,
|
||
sizeof(ms_tmp), sense);
|
||
if (stat)
|
||
return stat;
|
||
|
||
toc->last_session_lba = be32_to_cpu(ms_tmp.ent.addr.lba);
|
||
} else {
|
||
ms_tmp.hdr.first_track = ms_tmp.hdr.last_track = CDROM_LEADOUT;
|
||
toc->last_session_lba = msf_to_lba(0, 2, 0); /* 0m 2s 0f */
|
||
}
|
||
|
||
#if ! STANDARD_ATAPI
|
||
if (CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd) {
|
||
/* Re-read multisession information using MSF format */
|
||
stat = cdrom_read_tocentry(drive, 0, 1, 1, (char *)&ms_tmp,
|
||
sizeof(ms_tmp), sense);
|
||
if (stat)
|
||
return stat;
|
||
|
||
msf_from_bcd (&ms_tmp.ent.addr.msf);
|
||
toc->last_session_lba = msf_to_lba(ms_tmp.ent.addr.msf.minute,
|
||
ms_tmp.ent.addr.msf.second,
|
||
ms_tmp.ent.addr.msf.frame);
|
||
}
|
||
#endif /* not STANDARD_ATAPI */
|
||
|
||
toc->xa_flag = (ms_tmp.hdr.first_track != ms_tmp.hdr.last_track);
|
||
|
||
/* Now try to get the total cdrom capacity. */
|
||
stat = cdrom_get_last_written(cdi, &last_written);
|
||
if (!stat && (last_written > toc->capacity)) {
|
||
toc->capacity = last_written;
|
||
set_capacity(info->disk, toc->capacity * sectors_per_frame);
|
||
}
|
||
|
||
/* Remember that we've read this stuff. */
|
||
CDROM_STATE_FLAGS(drive)->toc_valid = 1;
|
||
|
||
return 0;
|
||
}
|
||
|
||
|
||
static int cdrom_read_subchannel(ide_drive_t *drive, int format, char *buf,
|
||
int buflen, struct request_sense *sense)
|
||
{
|
||
struct request req;
|
||
|
||
cdrom_prepare_request(drive, &req);
|
||
|
||
req.sense = sense;
|
||
req.data = buf;
|
||
req.data_len = buflen;
|
||
req.cmd[0] = GPCMD_READ_SUBCHANNEL;
|
||
req.cmd[1] = 2; /* MSF addressing */
|
||
req.cmd[2] = 0x40; /* request subQ data */
|
||
req.cmd[3] = format;
|
||
req.cmd[7] = (buflen >> 8);
|
||
req.cmd[8] = (buflen & 0xff);
|
||
return cdrom_queue_packet_command(drive, &req);
|
||
}
|
||
|
||
/* ATAPI cdrom drives are free to select the speed you request or any slower
|
||
rate :-( Requesting too fast a speed will _not_ produce an error. */
|
||
static int cdrom_select_speed(ide_drive_t *drive, int speed,
|
||
struct request_sense *sense)
|
||
{
|
||
struct request req;
|
||
cdrom_prepare_request(drive, &req);
|
||
|
||
req.sense = sense;
|
||
if (speed == 0)
|
||
speed = 0xffff; /* set to max */
|
||
else
|
||
speed *= 177; /* Nx to kbytes/s */
|
||
|
||
req.cmd[0] = GPCMD_SET_SPEED;
|
||
/* Read Drive speed in kbytes/second MSB */
|
||
req.cmd[2] = (speed >> 8) & 0xff;
|
||
/* Read Drive speed in kbytes/second LSB */
|
||
req.cmd[3] = speed & 0xff;
|
||
if (CDROM_CONFIG_FLAGS(drive)->cd_r ||
|
||
CDROM_CONFIG_FLAGS(drive)->cd_rw ||
|
||
CDROM_CONFIG_FLAGS(drive)->dvd_r) {
|
||
/* Write Drive speed in kbytes/second MSB */
|
||
req.cmd[4] = (speed >> 8) & 0xff;
|
||
/* Write Drive speed in kbytes/second LSB */
|
||
req.cmd[5] = speed & 0xff;
|
||
}
|
||
|
||
return cdrom_queue_packet_command(drive, &req);
|
||
}
|
||
|
||
static int cdrom_play_audio(ide_drive_t *drive, int lba_start, int lba_end)
|
||
{
|
||
struct request_sense sense;
|
||
struct request req;
|
||
|
||
cdrom_prepare_request(drive, &req);
|
||
|
||
req.sense = &sense;
|
||
req.cmd[0] = GPCMD_PLAY_AUDIO_MSF;
|
||
lba_to_msf(lba_start, &req.cmd[3], &req.cmd[4], &req.cmd[5]);
|
||
lba_to_msf(lba_end-1, &req.cmd[6], &req.cmd[7], &req.cmd[8]);
|
||
|
||
return cdrom_queue_packet_command(drive, &req);
|
||
}
|
||
|
||
static int cdrom_get_toc_entry(ide_drive_t *drive, int track,
|
||
struct atapi_toc_entry **ent)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct atapi_toc *toc = info->toc;
|
||
int ntracks;
|
||
|
||
/*
|
||
* don't serve cached data, if the toc isn't valid
|
||
*/
|
||
if (!CDROM_STATE_FLAGS(drive)->toc_valid)
|
||
return -EINVAL;
|
||
|
||
/* Check validity of requested track number. */
|
||
ntracks = toc->hdr.last_track - toc->hdr.first_track + 1;
|
||
if (toc->hdr.first_track == CDROM_LEADOUT) ntracks = 0;
|
||
if (track == CDROM_LEADOUT)
|
||
*ent = &toc->ent[ntracks];
|
||
else if (track < toc->hdr.first_track ||
|
||
track > toc->hdr.last_track)
|
||
return -EINVAL;
|
||
else
|
||
*ent = &toc->ent[track - toc->hdr.first_track];
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* the generic packet interface to cdrom.c */
|
||
static int ide_cdrom_packet(struct cdrom_device_info *cdi,
|
||
struct packet_command *cgc)
|
||
{
|
||
struct request req;
|
||
ide_drive_t *drive = cdi->handle;
|
||
|
||
if (cgc->timeout <= 0)
|
||
cgc->timeout = ATAPI_WAIT_PC;
|
||
|
||
/* here we queue the commands from the uniform CD-ROM
|
||
layer. the packet must be complete, as we do not
|
||
touch it at all. */
|
||
cdrom_prepare_request(drive, &req);
|
||
memcpy(req.cmd, cgc->cmd, CDROM_PACKET_SIZE);
|
||
if (cgc->sense)
|
||
memset(cgc->sense, 0, sizeof(struct request_sense));
|
||
req.data = cgc->buffer;
|
||
req.data_len = cgc->buflen;
|
||
req.timeout = cgc->timeout;
|
||
|
||
if (cgc->quiet)
|
||
req.flags |= REQ_QUIET;
|
||
|
||
req.sense = cgc->sense;
|
||
cgc->stat = cdrom_queue_packet_command(drive, &req);
|
||
if (!cgc->stat)
|
||
cgc->buflen -= req.data_len;
|
||
return cgc->stat;
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_dev_ioctl (struct cdrom_device_info *cdi,
|
||
unsigned int cmd, unsigned long arg)
|
||
{
|
||
struct packet_command cgc;
|
||
char buffer[16];
|
||
int stat;
|
||
|
||
init_cdrom_command(&cgc, buffer, sizeof(buffer), CGC_DATA_UNKNOWN);
|
||
|
||
/* These will be moved into the Uniform layer shortly... */
|
||
switch (cmd) {
|
||
case CDROMSETSPINDOWN: {
|
||
char spindown;
|
||
|
||
if (copy_from_user(&spindown, (void __user *) arg, sizeof(char)))
|
||
return -EFAULT;
|
||
|
||
if ((stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0)))
|
||
return stat;
|
||
|
||
buffer[11] = (buffer[11] & 0xf0) | (spindown & 0x0f);
|
||
|
||
return cdrom_mode_select(cdi, &cgc);
|
||
}
|
||
|
||
case CDROMGETSPINDOWN: {
|
||
char spindown;
|
||
|
||
if ((stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CDROM_PAGE, 0)))
|
||
return stat;
|
||
|
||
spindown = buffer[11] & 0x0f;
|
||
|
||
if (copy_to_user((void __user *) arg, &spindown, sizeof (char)))
|
||
return -EFAULT;
|
||
|
||
return 0;
|
||
}
|
||
|
||
default:
|
||
return -EINVAL;
|
||
}
|
||
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_audio_ioctl (struct cdrom_device_info *cdi,
|
||
unsigned int cmd, void *arg)
|
||
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
int stat;
|
||
|
||
switch (cmd) {
|
||
/*
|
||
* emulate PLAY_AUDIO_TI command with PLAY_AUDIO_10, since
|
||
* atapi doesn't support it
|
||
*/
|
||
case CDROMPLAYTRKIND: {
|
||
unsigned long lba_start, lba_end;
|
||
struct cdrom_ti *ti = arg;
|
||
struct atapi_toc_entry *first_toc, *last_toc;
|
||
|
||
stat = cdrom_get_toc_entry(drive, ti->cdti_trk0, &first_toc);
|
||
if (stat)
|
||
return stat;
|
||
|
||
stat = cdrom_get_toc_entry(drive, ti->cdti_trk1, &last_toc);
|
||
if (stat)
|
||
return stat;
|
||
|
||
if (ti->cdti_trk1 != CDROM_LEADOUT)
|
||
++last_toc;
|
||
lba_start = first_toc->addr.lba;
|
||
lba_end = last_toc->addr.lba;
|
||
|
||
if (lba_end <= lba_start)
|
||
return -EINVAL;
|
||
|
||
return cdrom_play_audio(drive, lba_start, lba_end);
|
||
}
|
||
|
||
case CDROMREADTOCHDR: {
|
||
struct cdrom_tochdr *tochdr = arg;
|
||
struct atapi_toc *toc;
|
||
|
||
/* Make sure our saved TOC is valid. */
|
||
stat = cdrom_read_toc(drive, NULL);
|
||
if (stat)
|
||
return stat;
|
||
|
||
toc = info->toc;
|
||
tochdr->cdth_trk0 = toc->hdr.first_track;
|
||
tochdr->cdth_trk1 = toc->hdr.last_track;
|
||
|
||
return 0;
|
||
}
|
||
|
||
case CDROMREADTOCENTRY: {
|
||
struct cdrom_tocentry *tocentry = arg;
|
||
struct atapi_toc_entry *toce;
|
||
|
||
stat = cdrom_get_toc_entry(drive, tocentry->cdte_track, &toce);
|
||
if (stat)
|
||
return stat;
|
||
|
||
tocentry->cdte_ctrl = toce->control;
|
||
tocentry->cdte_adr = toce->adr;
|
||
if (tocentry->cdte_format == CDROM_MSF) {
|
||
lba_to_msf (toce->addr.lba,
|
||
&tocentry->cdte_addr.msf.minute,
|
||
&tocentry->cdte_addr.msf.second,
|
||
&tocentry->cdte_addr.msf.frame);
|
||
} else
|
||
tocentry->cdte_addr.lba = toce->addr.lba;
|
||
|
||
return 0;
|
||
}
|
||
|
||
default:
|
||
return -EINVAL;
|
||
}
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_reset (struct cdrom_device_info *cdi)
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
struct request_sense sense;
|
||
struct request req;
|
||
int ret;
|
||
|
||
cdrom_prepare_request(drive, &req);
|
||
req.flags = REQ_SPECIAL | REQ_QUIET;
|
||
ret = ide_do_drive_cmd(drive, &req, ide_wait);
|
||
|
||
/*
|
||
* A reset will unlock the door. If it was previously locked,
|
||
* lock it again.
|
||
*/
|
||
if (CDROM_STATE_FLAGS(drive)->door_locked)
|
||
(void) cdrom_lockdoor(drive, 1, &sense);
|
||
|
||
return ret;
|
||
}
|
||
|
||
|
||
static
|
||
int ide_cdrom_tray_move (struct cdrom_device_info *cdi, int position)
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
struct request_sense sense;
|
||
|
||
if (position) {
|
||
int stat = cdrom_lockdoor(drive, 0, &sense);
|
||
if (stat)
|
||
return stat;
|
||
}
|
||
|
||
return cdrom_eject(drive, !position, &sense);
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_lock_door (struct cdrom_device_info *cdi, int lock)
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
return cdrom_lockdoor(drive, lock, NULL);
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_get_capabilities(ide_drive_t *drive, struct atapi_capabilities_page *cap)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct cdrom_device_info *cdi = &info->devinfo;
|
||
struct packet_command cgc;
|
||
int stat, attempts = 3, size = sizeof(*cap);
|
||
|
||
/*
|
||
* ACER50 (and others?) require the full spec length mode sense
|
||
* page capabilities size, but older drives break.
|
||
*/
|
||
if (!(!strcmp(drive->id->model, "ATAPI CD ROM DRIVE 50X MAX") ||
|
||
!strcmp(drive->id->model, "WPI CDS-32X")))
|
||
size -= sizeof(cap->pad);
|
||
|
||
init_cdrom_command(&cgc, cap, size, CGC_DATA_UNKNOWN);
|
||
do { /* we seem to get stat=0x01,err=0x00 the first time (??) */
|
||
stat = cdrom_mode_sense(cdi, &cgc, GPMODE_CAPABILITIES_PAGE, 0);
|
||
if (!stat)
|
||
break;
|
||
} while (--attempts);
|
||
return stat;
|
||
}
|
||
|
||
static
|
||
void ide_cdrom_update_speed (ide_drive_t *drive, struct atapi_capabilities_page *cap)
|
||
{
|
||
/* The ACER/AOpen 24X cdrom has the speed fields byte-swapped */
|
||
if (!drive->id->model[0] &&
|
||
!strncmp(drive->id->fw_rev, "241N", 4)) {
|
||
CDROM_STATE_FLAGS(drive)->current_speed =
|
||
(((unsigned int)cap->curspeed) + (176/2)) / 176;
|
||
CDROM_CONFIG_FLAGS(drive)->max_speed =
|
||
(((unsigned int)cap->maxspeed) + (176/2)) / 176;
|
||
} else {
|
||
CDROM_STATE_FLAGS(drive)->current_speed =
|
||
(ntohs(cap->curspeed) + (176/2)) / 176;
|
||
CDROM_CONFIG_FLAGS(drive)->max_speed =
|
||
(ntohs(cap->maxspeed) + (176/2)) / 176;
|
||
}
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_select_speed (struct cdrom_device_info *cdi, int speed)
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
struct request_sense sense;
|
||
struct atapi_capabilities_page cap;
|
||
int stat;
|
||
|
||
if ((stat = cdrom_select_speed(drive, speed, &sense)) < 0)
|
||
return stat;
|
||
|
||
if (!ide_cdrom_get_capabilities(drive, &cap)) {
|
||
ide_cdrom_update_speed(drive, &cap);
|
||
cdi->speed = CDROM_STATE_FLAGS(drive)->current_speed;
|
||
}
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* add logic to try GET_EVENT command first to check for media and tray
|
||
* status. this should be supported by newer cd-r/w and all DVD etc
|
||
* drives
|
||
*/
|
||
static
|
||
int ide_cdrom_drive_status (struct cdrom_device_info *cdi, int slot_nr)
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
struct media_event_desc med;
|
||
struct request_sense sense;
|
||
int stat;
|
||
|
||
if (slot_nr != CDSL_CURRENT)
|
||
return -EINVAL;
|
||
|
||
stat = cdrom_check_status(drive, &sense);
|
||
if (!stat || sense.sense_key == UNIT_ATTENTION)
|
||
return CDS_DISC_OK;
|
||
|
||
if (!cdrom_get_media_event(cdi, &med)) {
|
||
if (med.media_present)
|
||
return CDS_DISC_OK;
|
||
else if (med.door_open)
|
||
return CDS_TRAY_OPEN;
|
||
else
|
||
return CDS_NO_DISC;
|
||
}
|
||
|
||
if (sense.sense_key == NOT_READY && sense.asc == 0x04 && sense.ascq == 0x04)
|
||
return CDS_DISC_OK;
|
||
|
||
/*
|
||
* If not using Mt Fuji extended media tray reports,
|
||
* just return TRAY_OPEN since ATAPI doesn't provide
|
||
* any other way to detect this...
|
||
*/
|
||
if (sense.sense_key == NOT_READY) {
|
||
if (sense.asc == 0x3a) {
|
||
if (sense.ascq == 1)
|
||
return CDS_NO_DISC;
|
||
else if (sense.ascq == 0 || sense.ascq == 2)
|
||
return CDS_TRAY_OPEN;
|
||
}
|
||
}
|
||
|
||
return CDS_DRIVE_NOT_READY;
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_get_last_session (struct cdrom_device_info *cdi,
|
||
struct cdrom_multisession *ms_info)
|
||
{
|
||
struct atapi_toc *toc;
|
||
ide_drive_t *drive = cdi->handle;
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct request_sense sense;
|
||
int ret;
|
||
|
||
if (!CDROM_STATE_FLAGS(drive)->toc_valid || info->toc == NULL)
|
||
if ((ret = cdrom_read_toc(drive, &sense)))
|
||
return ret;
|
||
|
||
toc = info->toc;
|
||
ms_info->addr.lba = toc->last_session_lba;
|
||
ms_info->xa_flag = toc->xa_flag;
|
||
|
||
return 0;
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_get_mcn (struct cdrom_device_info *cdi,
|
||
struct cdrom_mcn *mcn_info)
|
||
{
|
||
int stat;
|
||
char mcnbuf[24];
|
||
ide_drive_t *drive = cdi->handle;
|
||
|
||
/* get MCN */
|
||
if ((stat = cdrom_read_subchannel(drive, 2, mcnbuf, sizeof (mcnbuf), NULL)))
|
||
return stat;
|
||
|
||
memcpy (mcn_info->medium_catalog_number, mcnbuf+9,
|
||
sizeof (mcn_info->medium_catalog_number)-1);
|
||
mcn_info->medium_catalog_number[sizeof (mcn_info->medium_catalog_number)-1]
|
||
= '\0';
|
||
|
||
return 0;
|
||
}
|
||
|
||
|
||
|
||
/****************************************************************************
|
||
* Other driver requests (open, close, check media change).
|
||
*/
|
||
|
||
static
|
||
int ide_cdrom_check_media_change_real (struct cdrom_device_info *cdi,
|
||
int slot_nr)
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
int retval;
|
||
|
||
if (slot_nr == CDSL_CURRENT) {
|
||
(void) cdrom_check_status(drive, NULL);
|
||
retval = CDROM_STATE_FLAGS(drive)->media_changed;
|
||
CDROM_STATE_FLAGS(drive)->media_changed = 0;
|
||
return retval;
|
||
} else {
|
||
return -EINVAL;
|
||
}
|
||
}
|
||
|
||
|
||
static
|
||
int ide_cdrom_open_real (struct cdrom_device_info *cdi, int purpose)
|
||
{
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Close down the device. Invalidate all cached blocks.
|
||
*/
|
||
|
||
static
|
||
void ide_cdrom_release_real (struct cdrom_device_info *cdi)
|
||
{
|
||
ide_drive_t *drive = cdi->handle;
|
||
|
||
if (!cdi->use_count)
|
||
CDROM_STATE_FLAGS(drive)->toc_valid = 0;
|
||
}
|
||
|
||
|
||
|
||
/****************************************************************************
|
||
* Device initialization.
|
||
*/
|
||
static struct cdrom_device_ops ide_cdrom_dops = {
|
||
.open = ide_cdrom_open_real,
|
||
.release = ide_cdrom_release_real,
|
||
.drive_status = ide_cdrom_drive_status,
|
||
.media_changed = ide_cdrom_check_media_change_real,
|
||
.tray_move = ide_cdrom_tray_move,
|
||
.lock_door = ide_cdrom_lock_door,
|
||
.select_speed = ide_cdrom_select_speed,
|
||
.get_last_session = ide_cdrom_get_last_session,
|
||
.get_mcn = ide_cdrom_get_mcn,
|
||
.reset = ide_cdrom_reset,
|
||
.audio_ioctl = ide_cdrom_audio_ioctl,
|
||
.dev_ioctl = ide_cdrom_dev_ioctl,
|
||
.capability = CDC_CLOSE_TRAY | CDC_OPEN_TRAY | CDC_LOCK |
|
||
CDC_SELECT_SPEED | CDC_SELECT_DISC |
|
||
CDC_MULTI_SESSION | CDC_MCN |
|
||
CDC_MEDIA_CHANGED | CDC_PLAY_AUDIO | CDC_RESET |
|
||
CDC_IOCTLS | CDC_DRIVE_STATUS | CDC_CD_R |
|
||
CDC_CD_RW | CDC_DVD | CDC_DVD_R| CDC_DVD_RAM |
|
||
CDC_GENERIC_PACKET | CDC_MO_DRIVE | CDC_MRW |
|
||
CDC_MRW_W | CDC_RAM,
|
||
.generic_packet = ide_cdrom_packet,
|
||
};
|
||
|
||
static int ide_cdrom_register (ide_drive_t *drive, int nslots)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct cdrom_device_info *devinfo = &info->devinfo;
|
||
|
||
devinfo->ops = &ide_cdrom_dops;
|
||
devinfo->mask = 0;
|
||
devinfo->speed = CDROM_STATE_FLAGS(drive)->current_speed;
|
||
devinfo->capacity = nslots;
|
||
devinfo->handle = drive;
|
||
strcpy(devinfo->name, drive->name);
|
||
|
||
/* set capability mask to match the probe. */
|
||
if (!CDROM_CONFIG_FLAGS(drive)->cd_r)
|
||
devinfo->mask |= CDC_CD_R;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->cd_rw)
|
||
devinfo->mask |= CDC_CD_RW;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->dvd)
|
||
devinfo->mask |= CDC_DVD;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->dvd_r)
|
||
devinfo->mask |= CDC_DVD_R;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->dvd_ram)
|
||
devinfo->mask |= CDC_DVD_RAM;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->is_changer)
|
||
devinfo->mask |= CDC_SELECT_DISC;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->audio_play)
|
||
devinfo->mask |= CDC_PLAY_AUDIO;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->close_tray)
|
||
devinfo->mask |= CDC_CLOSE_TRAY;
|
||
if (!CDROM_CONFIG_FLAGS(drive)->mo_drive)
|
||
devinfo->mask |= CDC_MO_DRIVE;
|
||
|
||
devinfo->disk = info->disk;
|
||
return register_cdrom(devinfo);
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_probe_capabilities (ide_drive_t *drive)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct cdrom_device_info *cdi = &info->devinfo;
|
||
struct atapi_capabilities_page cap;
|
||
int nslots = 1;
|
||
|
||
if (drive->media == ide_optical) {
|
||
CDROM_CONFIG_FLAGS(drive)->mo_drive = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->ram = 1;
|
||
printk(KERN_ERR "%s: ATAPI magneto-optical drive\n", drive->name);
|
||
return nslots;
|
||
}
|
||
|
||
if (CDROM_CONFIG_FLAGS(drive)->nec260 ||
|
||
!strcmp(drive->id->model,"STINGRAY 8422 IDE 8X CD-ROM 7-27-95")) {
|
||
CDROM_CONFIG_FLAGS(drive)->no_eject = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
|
||
return nslots;
|
||
}
|
||
|
||
/*
|
||
* we have to cheat a little here. the packet will eventually
|
||
* be queued with ide_cdrom_packet(), which extracts the
|
||
* drive from cdi->handle. Since this device hasn't been
|
||
* registered with the Uniform layer yet, it can't do this.
|
||
* Same goes for cdi->ops.
|
||
*/
|
||
cdi->handle = drive;
|
||
cdi->ops = &ide_cdrom_dops;
|
||
|
||
if (ide_cdrom_get_capabilities(drive, &cap))
|
||
return 0;
|
||
|
||
if (cap.lock == 0)
|
||
CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
|
||
if (cap.eject)
|
||
CDROM_CONFIG_FLAGS(drive)->no_eject = 0;
|
||
if (cap.cd_r_write)
|
||
CDROM_CONFIG_FLAGS(drive)->cd_r = 1;
|
||
if (cap.cd_rw_write) {
|
||
CDROM_CONFIG_FLAGS(drive)->cd_rw = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->ram = 1;
|
||
}
|
||
if (cap.test_write)
|
||
CDROM_CONFIG_FLAGS(drive)->test_write = 1;
|
||
if (cap.dvd_ram_read || cap.dvd_r_read || cap.dvd_rom)
|
||
CDROM_CONFIG_FLAGS(drive)->dvd = 1;
|
||
if (cap.dvd_ram_write) {
|
||
CDROM_CONFIG_FLAGS(drive)->dvd_ram = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->ram = 1;
|
||
}
|
||
if (cap.dvd_r_write)
|
||
CDROM_CONFIG_FLAGS(drive)->dvd_r = 1;
|
||
if (cap.audio_play)
|
||
CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
|
||
if (cap.mechtype == mechtype_caddy || cap.mechtype == mechtype_popup)
|
||
CDROM_CONFIG_FLAGS(drive)->close_tray = 0;
|
||
|
||
/* Some drives used by Apple don't advertise audio play
|
||
* but they do support reading TOC & audio datas
|
||
*/
|
||
if (strcmp(drive->id->model, "MATSHITADVD-ROM SR-8187") == 0 ||
|
||
strcmp(drive->id->model, "MATSHITADVD-ROM SR-8186") == 0 ||
|
||
strcmp(drive->id->model, "MATSHITADVD-ROM SR-8176") == 0 ||
|
||
strcmp(drive->id->model, "MATSHITADVD-ROM SR-8174") == 0)
|
||
CDROM_CONFIG_FLAGS(drive)->audio_play = 1;
|
||
|
||
#if ! STANDARD_ATAPI
|
||
if (cdi->sanyo_slot > 0) {
|
||
CDROM_CONFIG_FLAGS(drive)->is_changer = 1;
|
||
nslots = 3;
|
||
}
|
||
|
||
else
|
||
#endif /* not STANDARD_ATAPI */
|
||
if (cap.mechtype == mechtype_individual_changer ||
|
||
cap.mechtype == mechtype_cartridge_changer) {
|
||
if ((nslots = cdrom_number_of_slots(cdi)) > 1) {
|
||
CDROM_CONFIG_FLAGS(drive)->is_changer = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->supp_disc_present = 1;
|
||
}
|
||
}
|
||
|
||
ide_cdrom_update_speed(drive, &cap);
|
||
/* don't print speed if the drive reported 0.
|
||
*/
|
||
printk(KERN_INFO "%s: ATAPI", drive->name);
|
||
if (CDROM_CONFIG_FLAGS(drive)->max_speed)
|
||
printk(" %dX", CDROM_CONFIG_FLAGS(drive)->max_speed);
|
||
printk(" %s", CDROM_CONFIG_FLAGS(drive)->dvd ? "DVD-ROM" : "CD-ROM");
|
||
|
||
if (CDROM_CONFIG_FLAGS(drive)->dvd_r|CDROM_CONFIG_FLAGS(drive)->dvd_ram)
|
||
printk(" DVD%s%s",
|
||
(CDROM_CONFIG_FLAGS(drive)->dvd_r)? "-R" : "",
|
||
(CDROM_CONFIG_FLAGS(drive)->dvd_ram)? "-RAM" : "");
|
||
|
||
if (CDROM_CONFIG_FLAGS(drive)->cd_r|CDROM_CONFIG_FLAGS(drive)->cd_rw)
|
||
printk(" CD%s%s",
|
||
(CDROM_CONFIG_FLAGS(drive)->cd_r)? "-R" : "",
|
||
(CDROM_CONFIG_FLAGS(drive)->cd_rw)? "/RW" : "");
|
||
|
||
if (CDROM_CONFIG_FLAGS(drive)->is_changer)
|
||
printk(" changer w/%d slots", nslots);
|
||
else
|
||
printk(" drive");
|
||
|
||
printk(", %dkB Cache", be16_to_cpu(cap.buffer_size));
|
||
|
||
if (drive->using_dma)
|
||
ide_dma_verbose(drive);
|
||
|
||
printk("\n");
|
||
|
||
return nslots;
|
||
}
|
||
|
||
static void ide_cdrom_add_settings(ide_drive_t *drive)
|
||
{
|
||
ide_add_setting(drive, "dsc_overlap", SETTING_RW, -1, -1, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL);
|
||
}
|
||
|
||
/*
|
||
* standard prep_rq_fn that builds 10 byte cmds
|
||
*/
|
||
static int ide_cdrom_prep_fs(request_queue_t *q, struct request *rq)
|
||
{
|
||
int hard_sect = queue_hardsect_size(q);
|
||
long block = (long)rq->hard_sector / (hard_sect >> 9);
|
||
unsigned long blocks = rq->hard_nr_sectors / (hard_sect >> 9);
|
||
|
||
memset(rq->cmd, 0, sizeof(rq->cmd));
|
||
|
||
if (rq_data_dir(rq) == READ)
|
||
rq->cmd[0] = GPCMD_READ_10;
|
||
else
|
||
rq->cmd[0] = GPCMD_WRITE_10;
|
||
|
||
/*
|
||
* fill in lba
|
||
*/
|
||
rq->cmd[2] = (block >> 24) & 0xff;
|
||
rq->cmd[3] = (block >> 16) & 0xff;
|
||
rq->cmd[4] = (block >> 8) & 0xff;
|
||
rq->cmd[5] = block & 0xff;
|
||
|
||
/*
|
||
* and transfer length
|
||
*/
|
||
rq->cmd[7] = (blocks >> 8) & 0xff;
|
||
rq->cmd[8] = blocks & 0xff;
|
||
rq->cmd_len = 10;
|
||
return BLKPREP_OK;
|
||
}
|
||
|
||
/*
|
||
* Most of the SCSI commands are supported directly by ATAPI devices.
|
||
* This transform handles the few exceptions.
|
||
*/
|
||
static int ide_cdrom_prep_pc(struct request *rq)
|
||
{
|
||
u8 *c = rq->cmd;
|
||
|
||
/*
|
||
* Transform 6-byte read/write commands to the 10-byte version
|
||
*/
|
||
if (c[0] == READ_6 || c[0] == WRITE_6) {
|
||
c[8] = c[4];
|
||
c[5] = c[3];
|
||
c[4] = c[2];
|
||
c[3] = c[1] & 0x1f;
|
||
c[2] = 0;
|
||
c[1] &= 0xe0;
|
||
c[0] += (READ_10 - READ_6);
|
||
rq->cmd_len = 10;
|
||
return BLKPREP_OK;
|
||
}
|
||
|
||
/*
|
||
* it's silly to pretend we understand 6-byte sense commands, just
|
||
* reject with ILLEGAL_REQUEST and the caller should take the
|
||
* appropriate action
|
||
*/
|
||
if (c[0] == MODE_SENSE || c[0] == MODE_SELECT) {
|
||
rq->errors = ILLEGAL_REQUEST;
|
||
return BLKPREP_KILL;
|
||
}
|
||
|
||
return BLKPREP_OK;
|
||
}
|
||
|
||
static int ide_cdrom_prep_fn(request_queue_t *q, struct request *rq)
|
||
{
|
||
if (rq->flags & REQ_CMD)
|
||
return ide_cdrom_prep_fs(q, rq);
|
||
else if (rq->flags & REQ_BLOCK_PC)
|
||
return ide_cdrom_prep_pc(rq);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static
|
||
int ide_cdrom_setup (ide_drive_t *drive)
|
||
{
|
||
struct cdrom_info *info = drive->driver_data;
|
||
struct cdrom_device_info *cdi = &info->devinfo;
|
||
int nslots;
|
||
|
||
blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
|
||
blk_queue_dma_alignment(drive->queue, 31);
|
||
drive->queue->unplug_delay = (1 * HZ) / 1000;
|
||
if (!drive->queue->unplug_delay)
|
||
drive->queue->unplug_delay = 1;
|
||
|
||
drive->special.all = 0;
|
||
|
||
CDROM_STATE_FLAGS(drive)->media_changed = 1;
|
||
CDROM_STATE_FLAGS(drive)->toc_valid = 0;
|
||
CDROM_STATE_FLAGS(drive)->door_locked = 0;
|
||
|
||
#if NO_DOOR_LOCKING
|
||
CDROM_CONFIG_FLAGS(drive)->no_doorlock = 1;
|
||
#else
|
||
CDROM_CONFIG_FLAGS(drive)->no_doorlock = 0;
|
||
#endif
|
||
|
||
CDROM_CONFIG_FLAGS(drive)->drq_interrupt = ((drive->id->config & 0x0060) == 0x20);
|
||
CDROM_CONFIG_FLAGS(drive)->is_changer = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->cd_r = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->cd_rw = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->test_write = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->dvd = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->dvd_r = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->dvd_ram = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->no_eject = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->supp_disc_present = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->audio_play = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->close_tray = 1;
|
||
|
||
/* limit transfer size per interrupt. */
|
||
CDROM_CONFIG_FLAGS(drive)->limit_nframes = 0;
|
||
/* a testament to the nice quality of Samsung drives... */
|
||
if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2430"))
|
||
CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
|
||
else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-2432"))
|
||
CDROM_CONFIG_FLAGS(drive)->limit_nframes = 1;
|
||
/* the 3231 model does not support the SET_CD_SPEED command */
|
||
else if (!strcmp(drive->id->model, "SAMSUNG CD-ROM SCR-3231"))
|
||
cdi->mask |= CDC_SELECT_SPEED;
|
||
|
||
#if ! STANDARD_ATAPI
|
||
/* by default Sanyo 3 CD changer support is turned off and
|
||
ATAPI Rev 2.2+ standard support for CD changers is used */
|
||
cdi->sanyo_slot = 0;
|
||
|
||
CDROM_CONFIG_FLAGS(drive)->nec260 = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 0;
|
||
CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 0;
|
||
|
||
if (strcmp (drive->id->model, "V003S0DS") == 0 &&
|
||
drive->id->fw_rev[4] == '1' &&
|
||
drive->id->fw_rev[6] <= '2') {
|
||
/* Vertos 300.
|
||
Some versions of this drive like to talk BCD. */
|
||
CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
|
||
}
|
||
|
||
else if (strcmp (drive->id->model, "V006E0DS") == 0 &&
|
||
drive->id->fw_rev[4] == '1' &&
|
||
drive->id->fw_rev[6] <= '2') {
|
||
/* Vertos 600 ESD. */
|
||
CDROM_CONFIG_FLAGS(drive)->toctracks_as_bcd = 1;
|
||
}
|
||
else if (strcmp(drive->id->model, "NEC CD-ROM DRIVE:260") == 0 &&
|
||
strncmp(drive->id->fw_rev, "1.01", 4) == 0) { /* FIXME */
|
||
/* Old NEC260 (not R).
|
||
This drive was released before the 1.2 version
|
||
of the spec. */
|
||
CDROM_CONFIG_FLAGS(drive)->tocaddr_as_bcd = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->nec260 = 1;
|
||
}
|
||
else if (strcmp(drive->id->model, "WEARNES CDD-120") == 0 &&
|
||
strncmp(drive->id->fw_rev, "A1.1", 4) == 0) { /* FIXME */
|
||
/* Wearnes */
|
||
CDROM_CONFIG_FLAGS(drive)->playmsf_as_bcd = 1;
|
||
CDROM_CONFIG_FLAGS(drive)->subchan_as_bcd = 1;
|
||
}
|
||
/* Sanyo 3 CD changer uses a non-standard command
|
||
for CD changing */
|
||
else if ((strcmp(drive->id->model, "CD-ROM CDR-C3 G") == 0) ||
|
||
(strcmp(drive->id->model, "CD-ROM CDR-C3G") == 0) ||
|
||
(strcmp(drive->id->model, "CD-ROM CDR_C36") == 0)) {
|
||
/* uses CD in slot 0 when value is set to 3 */
|
||
cdi->sanyo_slot = 3;
|
||
}
|
||
#endif /* not STANDARD_ATAPI */
|
||
|
||
info->toc = NULL;
|
||
info->buffer = NULL;
|
||
info->sector_buffered = 0;
|
||
info->nsectors_buffered = 0;
|
||
info->changer_info = NULL;
|
||
info->last_block = 0;
|
||
info->start_seek = 0;
|
||
|
||
nslots = ide_cdrom_probe_capabilities (drive);
|
||
|
||
/*
|
||
* set correct block size
|
||
*/
|
||
blk_queue_hardsect_size(drive->queue, CD_FRAMESIZE);
|
||
|
||
if (drive->autotune == IDE_TUNE_DEFAULT ||
|
||
drive->autotune == IDE_TUNE_AUTO)
|
||
drive->dsc_overlap = (drive->next != drive);
|
||
#if 0
|
||
drive->dsc_overlap = (HWIF(drive)->no_dsc) ? 0 : 1;
|
||
if (HWIF(drive)->no_dsc) {
|
||
printk(KERN_INFO "ide-cd: %s: disabling DSC overlap\n",
|
||
drive->name);
|
||
drive->dsc_overlap = 0;
|
||
}
|
||
#endif
|
||
|
||
if (ide_cdrom_register(drive, nslots)) {
|
||
printk (KERN_ERR "%s: ide_cdrom_setup failed to register device with the cdrom driver.\n", drive->name);
|
||
info->devinfo.handle = NULL;
|
||
return 1;
|
||
}
|
||
ide_cdrom_add_settings(drive);
|
||
return 0;
|
||
}
|
||
|
||
#ifdef CONFIG_PROC_FS
|
||
static
|
||
sector_t ide_cdrom_capacity (ide_drive_t *drive)
|
||
{
|
||
unsigned long capacity, sectors_per_frame;
|
||
|
||
if (cdrom_read_capacity(drive, &capacity, §ors_per_frame, NULL))
|
||
return 0;
|
||
|
||
return capacity * sectors_per_frame;
|
||
}
|
||
#endif
|
||
|
||
static int ide_cd_remove(struct device *dev)
|
||
{
|
||
ide_drive_t *drive = to_ide_device(dev);
|
||
struct cdrom_info *info = drive->driver_data;
|
||
|
||
ide_unregister_subdriver(drive, info->driver);
|
||
|
||
del_gendisk(info->disk);
|
||
|
||
ide_cd_put(info);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void ide_cd_release(struct kref *kref)
|
||
{
|
||
struct cdrom_info *info = to_ide_cd(kref);
|
||
struct cdrom_device_info *devinfo = &info->devinfo;
|
||
ide_drive_t *drive = info->drive;
|
||
struct gendisk *g = info->disk;
|
||
|
||
kfree(info->buffer);
|
||
kfree(info->toc);
|
||
kfree(info->changer_info);
|
||
if (devinfo->handle == drive && unregister_cdrom(devinfo))
|
||
printk(KERN_ERR "%s: %s failed to unregister device from the cdrom "
|
||
"driver.\n", __FUNCTION__, drive->name);
|
||
drive->dsc_overlap = 0;
|
||
drive->driver_data = NULL;
|
||
blk_queue_prep_rq(drive->queue, NULL);
|
||
g->private_data = NULL;
|
||
put_disk(g);
|
||
kfree(info);
|
||
}
|
||
|
||
static int ide_cd_probe(struct device *);
|
||
|
||
#ifdef CONFIG_PROC_FS
|
||
static int proc_idecd_read_capacity
|
||
(char *page, char **start, off_t off, int count, int *eof, void *data)
|
||
{
|
||
ide_drive_t *drive = data;
|
||
int len;
|
||
|
||
len = sprintf(page,"%llu\n", (long long)ide_cdrom_capacity(drive));
|
||
PROC_IDE_READ_RETURN(page,start,off,count,eof,len);
|
||
}
|
||
|
||
static ide_proc_entry_t idecd_proc[] = {
|
||
{ "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL },
|
||
{ NULL, 0, NULL, NULL }
|
||
};
|
||
#else
|
||
# define idecd_proc NULL
|
||
#endif
|
||
|
||
static ide_driver_t ide_cdrom_driver = {
|
||
.owner = THIS_MODULE,
|
||
.gen_driver = {
|
||
.name = "ide-cdrom",
|
||
.bus = &ide_bus_type,
|
||
.probe = ide_cd_probe,
|
||
.remove = ide_cd_remove,
|
||
},
|
||
.version = IDECD_VERSION,
|
||
.media = ide_cdrom,
|
||
.supports_dsc_overlap = 1,
|
||
.do_request = ide_do_rw_cdrom,
|
||
.end_request = ide_end_request,
|
||
.error = __ide_error,
|
||
.abort = __ide_abort,
|
||
.proc = idecd_proc,
|
||
};
|
||
|
||
static int idecd_open(struct inode * inode, struct file * file)
|
||
{
|
||
struct gendisk *disk = inode->i_bdev->bd_disk;
|
||
struct cdrom_info *info;
|
||
ide_drive_t *drive;
|
||
int rc = -ENOMEM;
|
||
|
||
if (!(info = ide_cd_get(disk)))
|
||
return -ENXIO;
|
||
|
||
drive = info->drive;
|
||
|
||
drive->usage++;
|
||
|
||
if (!info->buffer)
|
||
info->buffer = kmalloc(SECTOR_BUFFER_SIZE,
|
||
GFP_KERNEL|__GFP_REPEAT);
|
||
if (!info->buffer || (rc = cdrom_open(&info->devinfo, inode, file)))
|
||
drive->usage--;
|
||
|
||
if (rc < 0)
|
||
ide_cd_put(info);
|
||
|
||
return rc;
|
||
}
|
||
|
||
static int idecd_release(struct inode * inode, struct file * file)
|
||
{
|
||
struct gendisk *disk = inode->i_bdev->bd_disk;
|
||
struct cdrom_info *info = ide_cd_g(disk);
|
||
ide_drive_t *drive = info->drive;
|
||
|
||
cdrom_release (&info->devinfo, file);
|
||
drive->usage--;
|
||
|
||
ide_cd_put(info);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int idecd_ioctl (struct inode *inode, struct file *file,
|
||
unsigned int cmd, unsigned long arg)
|
||
{
|
||
struct block_device *bdev = inode->i_bdev;
|
||
struct cdrom_info *info = ide_cd_g(bdev->bd_disk);
|
||
int err;
|
||
|
||
err = generic_ide_ioctl(info->drive, file, bdev, cmd, arg);
|
||
if (err == -EINVAL)
|
||
err = cdrom_ioctl(file, &info->devinfo, inode, cmd, arg);
|
||
|
||
return err;
|
||
}
|
||
|
||
static int idecd_media_changed(struct gendisk *disk)
|
||
{
|
||
struct cdrom_info *info = ide_cd_g(disk);
|
||
return cdrom_media_changed(&info->devinfo);
|
||
}
|
||
|
||
static int idecd_revalidate_disk(struct gendisk *disk)
|
||
{
|
||
struct cdrom_info *info = ide_cd_g(disk);
|
||
struct request_sense sense;
|
||
cdrom_read_toc(info->drive, &sense);
|
||
return 0;
|
||
}
|
||
|
||
static struct block_device_operations idecd_ops = {
|
||
.owner = THIS_MODULE,
|
||
.open = idecd_open,
|
||
.release = idecd_release,
|
||
.ioctl = idecd_ioctl,
|
||
.media_changed = idecd_media_changed,
|
||
.revalidate_disk= idecd_revalidate_disk
|
||
};
|
||
|
||
/* options */
|
||
static char *ignore = NULL;
|
||
|
||
module_param(ignore, charp, 0400);
|
||
MODULE_DESCRIPTION("ATAPI CD-ROM Driver");
|
||
|
||
static int ide_cd_probe(struct device *dev)
|
||
{
|
||
ide_drive_t *drive = to_ide_device(dev);
|
||
struct cdrom_info *info;
|
||
struct gendisk *g;
|
||
struct request_sense sense;
|
||
|
||
if (!strstr("ide-cdrom", drive->driver_req))
|
||
goto failed;
|
||
if (!drive->present)
|
||
goto failed;
|
||
if (drive->media != ide_cdrom && drive->media != ide_optical)
|
||
goto failed;
|
||
/* skip drives that we were told to ignore */
|
||
if (ignore != NULL) {
|
||
if (strstr(ignore, drive->name)) {
|
||
printk(KERN_INFO "ide-cd: ignoring drive %s\n", drive->name);
|
||
goto failed;
|
||
}
|
||
}
|
||
if (drive->scsi) {
|
||
printk(KERN_INFO "ide-cd: passing drive %s to ide-scsi emulation.\n", drive->name);
|
||
goto failed;
|
||
}
|
||
info = kzalloc(sizeof(struct cdrom_info), GFP_KERNEL);
|
||
if (info == NULL) {
|
||
printk(KERN_ERR "%s: Can't allocate a cdrom structure\n", drive->name);
|
||
goto failed;
|
||
}
|
||
|
||
g = alloc_disk(1 << PARTN_BITS);
|
||
if (!g)
|
||
goto out_free_cd;
|
||
|
||
ide_init_disk(g, drive);
|
||
|
||
ide_register_subdriver(drive, &ide_cdrom_driver);
|
||
|
||
kref_init(&info->kref);
|
||
|
||
info->drive = drive;
|
||
info->driver = &ide_cdrom_driver;
|
||
info->disk = g;
|
||
|
||
g->private_data = &info->driver;
|
||
|
||
drive->driver_data = info;
|
||
|
||
g->minors = 1;
|
||
snprintf(g->devfs_name, sizeof(g->devfs_name),
|
||
"%s/cd", drive->devfs_name);
|
||
g->driverfs_dev = &drive->gendev;
|
||
g->flags = GENHD_FL_CD | GENHD_FL_REMOVABLE;
|
||
if (ide_cdrom_setup(drive)) {
|
||
struct cdrom_device_info *devinfo = &info->devinfo;
|
||
ide_unregister_subdriver(drive, &ide_cdrom_driver);
|
||
kfree(info->buffer);
|
||
kfree(info->toc);
|
||
kfree(info->changer_info);
|
||
if (devinfo->handle == drive && unregister_cdrom(devinfo))
|
||
printk (KERN_ERR "%s: ide_cdrom_cleanup failed to unregister device from the cdrom driver.\n", drive->name);
|
||
kfree(info);
|
||
drive->driver_data = NULL;
|
||
goto failed;
|
||
}
|
||
|
||
cdrom_read_toc(drive, &sense);
|
||
g->fops = &idecd_ops;
|
||
g->flags |= GENHD_FL_REMOVABLE;
|
||
add_disk(g);
|
||
return 0;
|
||
|
||
out_free_cd:
|
||
kfree(info);
|
||
failed:
|
||
return -ENODEV;
|
||
}
|
||
|
||
static void __exit ide_cdrom_exit(void)
|
||
{
|
||
driver_unregister(&ide_cdrom_driver.gen_driver);
|
||
}
|
||
|
||
static int ide_cdrom_init(void)
|
||
{
|
||
return driver_register(&ide_cdrom_driver.gen_driver);
|
||
}
|
||
|
||
module_init(ide_cdrom_init);
|
||
module_exit(ide_cdrom_exit);
|
||
MODULE_LICENSE("GPL");
|