284 lines
7.1 KiB
C
284 lines
7.1 KiB
C
/*
|
|
* Board setup routines for the IBM 750GX/CL platform w/ TSI10x bridge
|
|
*
|
|
* Copyright 2007 IBM Corporation
|
|
*
|
|
* Stephen Winiecki <stevewin@us.ibm.com>
|
|
* Josh Boyer <jwboyer@linux.vnet.ibm.com>
|
|
*
|
|
* Based on code from mpc7448_hpc2.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* version 2 as published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/kdev_t.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/root_dev.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/extable.h>
|
|
|
|
#include <asm/time.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/udbg.h>
|
|
#include <asm/tsi108.h>
|
|
#include <asm/pci-bridge.h>
|
|
#include <asm/reg.h>
|
|
#include <mm/mmu_decl.h>
|
|
#include <asm/tsi108_irq.h>
|
|
#include <asm/tsi108_pci.h>
|
|
#include <asm/mpic.h>
|
|
|
|
#undef DEBUG
|
|
|
|
#define HOLLY_PCI_CFG_PHYS 0x7c000000
|
|
|
|
int holly_exclude_device(struct pci_controller *hose, u_char bus, u_char devfn)
|
|
{
|
|
if (bus == 0 && PCI_SLOT(devfn) == 0)
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
else
|
|
return PCIBIOS_SUCCESSFUL;
|
|
}
|
|
|
|
static void holly_remap_bridge(void)
|
|
{
|
|
u32 lut_val, lut_addr;
|
|
int i;
|
|
|
|
printk(KERN_INFO "Remapping PCI bridge\n");
|
|
|
|
/* Re-init the PCI bridge and LUT registers to have mappings that don't
|
|
* rely on PIBS
|
|
*/
|
|
lut_addr = 0x900;
|
|
for (i = 0; i < 31; i++) {
|
|
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000201);
|
|
lut_addr += 4;
|
|
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
|
|
lut_addr += 4;
|
|
}
|
|
|
|
/* Reserve the last LUT entry for PCI I/O space */
|
|
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x00000241);
|
|
lut_addr += 4;
|
|
tsi108_write_reg(TSI108_PB_OFFSET + lut_addr, 0x0);
|
|
|
|
/* Map PCI I/O space */
|
|
tsi108_write_reg(TSI108_PCI_PFAB_IO_UPPER, 0x0);
|
|
tsi108_write_reg(TSI108_PCI_PFAB_IO, 0x1);
|
|
|
|
/* Map PCI CFG space */
|
|
tsi108_write_reg(TSI108_PCI_PFAB_BAR0_UPPER, 0x0);
|
|
tsi108_write_reg(TSI108_PCI_PFAB_BAR0, 0x7c000000 | 0x01);
|
|
|
|
/* We don't need MEM32 and PRM remapping so disable them */
|
|
tsi108_write_reg(TSI108_PCI_PFAB_MEM32, 0x0);
|
|
tsi108_write_reg(TSI108_PCI_PFAB_PFM3, 0x0);
|
|
tsi108_write_reg(TSI108_PCI_PFAB_PFM4, 0x0);
|
|
|
|
/* Set P2O_BAR0 */
|
|
tsi108_write_reg(TSI108_PCI_P2O_BAR0_UPPER, 0x0);
|
|
tsi108_write_reg(TSI108_PCI_P2O_BAR0, 0xc0000000);
|
|
|
|
/* Init the PCI LUTs to do no remapping */
|
|
lut_addr = 0x500;
|
|
lut_val = 0x00000002;
|
|
|
|
for (i = 0; i < 32; i++) {
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, lut_val);
|
|
lut_addr += 4;
|
|
tsi108_write_reg(TSI108_PCI_OFFSET + lut_addr, 0x40000000);
|
|
lut_addr += 4;
|
|
lut_val += 0x02000000;
|
|
}
|
|
tsi108_write_reg(TSI108_PCI_P2O_PAGE_SIZES, 0x00007900);
|
|
|
|
/* Set 64-bit PCI bus address for system memory */
|
|
tsi108_write_reg(TSI108_PCI_P2O_BAR2_UPPER, 0x0);
|
|
tsi108_write_reg(TSI108_PCI_P2O_BAR2, 0x0);
|
|
}
|
|
|
|
static void __init holly_setup_arch(void)
|
|
{
|
|
struct device_node *np;
|
|
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("holly_setup_arch():set_bridge", 0);
|
|
|
|
tsi108_csr_vir_base = get_vir_csrbase();
|
|
|
|
/* setup PCI host bridge */
|
|
holly_remap_bridge();
|
|
|
|
np = of_find_node_by_type(NULL, "pci");
|
|
if (np)
|
|
tsi108_setup_pci(np, HOLLY_PCI_CFG_PHYS, 1);
|
|
|
|
ppc_md.pci_exclude_device = holly_exclude_device;
|
|
if (ppc_md.progress)
|
|
ppc_md.progress("tsi108: resources set", 0x100);
|
|
|
|
printk(KERN_INFO "PPC750GX/CL Platform\n");
|
|
}
|
|
|
|
/*
|
|
* Interrupt setup and service. Interrupts on the holly come
|
|
* from the four external INT pins, PCI interrupts are routed via
|
|
* PCI interrupt control registers, it generates internal IRQ23
|
|
*
|
|
* Interrupt routing on the Holly Board:
|
|
* TSI108:PB_INT[0] -> CPU0:INT#
|
|
* TSI108:PB_INT[1] -> CPU0:MCP#
|
|
* TSI108:PB_INT[2] -> N/C
|
|
* TSI108:PB_INT[3] -> N/C
|
|
*/
|
|
static void __init holly_init_IRQ(void)
|
|
{
|
|
struct mpic *mpic;
|
|
#ifdef CONFIG_PCI
|
|
unsigned int cascade_pci_irq;
|
|
struct device_node *tsi_pci;
|
|
struct device_node *cascade_node = NULL;
|
|
#endif
|
|
|
|
mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
|
|
MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108,
|
|
24, 0,
|
|
"Tsi108_PIC");
|
|
|
|
BUG_ON(mpic == NULL);
|
|
|
|
mpic_assign_isu(mpic, 0, mpic->paddr + 0x100);
|
|
|
|
mpic_init(mpic);
|
|
|
|
#ifdef CONFIG_PCI
|
|
tsi_pci = of_find_node_by_type(NULL, "pci");
|
|
if (tsi_pci == NULL) {
|
|
printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
|
|
return;
|
|
}
|
|
|
|
cascade_node = of_find_node_by_type(NULL, "pic-router");
|
|
if (cascade_node == NULL) {
|
|
printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
|
|
return;
|
|
}
|
|
|
|
cascade_pci_irq = irq_of_parse_and_map(tsi_pci, 0);
|
|
pr_debug("%s: tsi108 cascade_pci_irq = 0x%x\n", __func__, (u32) cascade_pci_irq);
|
|
tsi108_pci_int_init(cascade_node);
|
|
irq_set_handler_data(cascade_pci_irq, mpic);
|
|
irq_set_chained_handler(cascade_pci_irq, tsi108_irq_cascade);
|
|
#endif
|
|
/* Configure MPIC outputs to CPU0 */
|
|
tsi108_write_reg(TSI108_MPIC_OFFSET + 0x30c, 0);
|
|
}
|
|
|
|
void holly_show_cpuinfo(struct seq_file *m)
|
|
{
|
|
seq_printf(m, "vendor\t\t: IBM\n");
|
|
seq_printf(m, "machine\t\t: PPC750 GX/CL\n");
|
|
}
|
|
|
|
void __noreturn holly_restart(char *cmd)
|
|
{
|
|
__be32 __iomem *ocn_bar1 = NULL;
|
|
unsigned long bar;
|
|
struct device_node *bridge = NULL;
|
|
const void *prop;
|
|
int size;
|
|
phys_addr_t addr = 0xc0000000;
|
|
|
|
local_irq_disable();
|
|
|
|
bridge = of_find_node_by_type(NULL, "tsi-bridge");
|
|
if (bridge) {
|
|
prop = of_get_property(bridge, "reg", &size);
|
|
addr = of_translate_address(bridge, prop);
|
|
}
|
|
addr += (TSI108_PB_OFFSET + 0x414);
|
|
|
|
ocn_bar1 = ioremap(addr, 0x4);
|
|
|
|
/* Turn on the BOOT bit so the addresses are correctly
|
|
* routed to the HLP interface */
|
|
bar = ioread32be(ocn_bar1);
|
|
bar |= 2;
|
|
iowrite32be(bar, ocn_bar1);
|
|
iosync();
|
|
|
|
/* Set SRR0 to the reset vector and turn on MSR_IP */
|
|
mtspr(SPRN_SRR0, 0xfff00100);
|
|
mtspr(SPRN_SRR1, MSR_IP);
|
|
|
|
/* Do an rfi to jump back to firmware. Somewhat evil,
|
|
* but it works
|
|
*/
|
|
__asm__ __volatile__("rfi" : : : "memory");
|
|
|
|
/* Spin until reset happens. Shouldn't really get here */
|
|
for (;;) ;
|
|
}
|
|
|
|
void holly_power_off(void)
|
|
{
|
|
local_irq_disable();
|
|
/* No way to shut power off with software */
|
|
for (;;) ;
|
|
}
|
|
|
|
void holly_halt(void)
|
|
{
|
|
holly_power_off();
|
|
}
|
|
|
|
/*
|
|
* Called very early, device-tree isn't unflattened
|
|
*/
|
|
static int __init holly_probe(void)
|
|
{
|
|
if (!of_machine_is_compatible("ibm,holly"))
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static int ppc750_machine_check_exception(struct pt_regs *regs)
|
|
{
|
|
const struct exception_table_entry *entry;
|
|
|
|
/* Are we prepared to handle this fault */
|
|
if ((entry = search_exception_tables(regs->nip)) != NULL) {
|
|
tsi108_clear_pci_cfg_error();
|
|
regs->msr |= MSR_RI;
|
|
regs->nip = extable_fixup(entry);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
define_machine(holly){
|
|
.name = "PPC750 GX/CL TSI",
|
|
.probe = holly_probe,
|
|
.setup_arch = holly_setup_arch,
|
|
.init_IRQ = holly_init_IRQ,
|
|
.show_cpuinfo = holly_show_cpuinfo,
|
|
.get_irq = mpic_get_irq,
|
|
.restart = holly_restart,
|
|
.calibrate_decr = generic_calibrate_decr,
|
|
.machine_check_exception = ppc750_machine_check_exception,
|
|
.progress = udbg_progress,
|
|
};
|