1344 lines
33 KiB
C
1344 lines
33 KiB
C
/*
|
|
* This is the driver for the STA2x11 Video Input Port.
|
|
*
|
|
* Copyright (C) 2012 ST Microelectronics
|
|
* author: Federico Vaga <federico.vaga@gmail.com>
|
|
* Copyright (C) 2010 WindRiver Systems, Inc.
|
|
* authors: Andreas Kies <andreas.kies@windriver.com>
|
|
* Vlad Lungu <vlad.lungu@windriver.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope it will be useful, but WITHOUT
|
|
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
|
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
|
* more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along with
|
|
* this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
|
|
*
|
|
* The full GNU General Public License is included in this distribution in
|
|
* the file called "COPYING".
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/videodev2.h>
|
|
#include <linux/kmod.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/delay.h>
|
|
#include <media/v4l2-common.h>
|
|
#include <media/v4l2-device.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-ioctl.h>
|
|
#include <media/v4l2-fh.h>
|
|
#include <media/v4l2-event.h>
|
|
#include <media/videobuf2-dma-contig.h>
|
|
|
|
#include "sta2x11_vip.h"
|
|
|
|
#define DRV_VERSION "1.3"
|
|
|
|
#ifndef PCI_DEVICE_ID_STMICRO_VIP
|
|
#define PCI_DEVICE_ID_STMICRO_VIP 0xCC0D
|
|
#endif
|
|
|
|
#define MAX_FRAMES 4
|
|
|
|
/*Register offsets*/
|
|
#define DVP_CTL 0x00
|
|
#define DVP_TFO 0x04
|
|
#define DVP_TFS 0x08
|
|
#define DVP_BFO 0x0C
|
|
#define DVP_BFS 0x10
|
|
#define DVP_VTP 0x14
|
|
#define DVP_VBP 0x18
|
|
#define DVP_VMP 0x1C
|
|
#define DVP_ITM 0x98
|
|
#define DVP_ITS 0x9C
|
|
#define DVP_STA 0xA0
|
|
#define DVP_HLFLN 0xA8
|
|
#define DVP_RGB 0xC0
|
|
#define DVP_PKZ 0xF0
|
|
|
|
/*Register fields*/
|
|
#define DVP_CTL_ENA 0x00000001
|
|
#define DVP_CTL_RST 0x80000000
|
|
#define DVP_CTL_DIS (~0x00040001)
|
|
|
|
#define DVP_IT_VSB 0x00000008
|
|
#define DVP_IT_VST 0x00000010
|
|
#define DVP_IT_FIFO 0x00000020
|
|
|
|
#define DVP_HLFLN_SD 0x00000001
|
|
|
|
#define SAVE_COUNT 8
|
|
#define AUX_COUNT 3
|
|
#define IRQ_COUNT 1
|
|
|
|
|
|
struct vip_buffer {
|
|
struct vb2_buffer vb;
|
|
struct list_head list;
|
|
dma_addr_t dma;
|
|
};
|
|
static inline struct vip_buffer *to_vip_buffer(struct vb2_buffer *vb2)
|
|
{
|
|
return container_of(vb2, struct vip_buffer, vb);
|
|
}
|
|
|
|
/**
|
|
* struct sta2x11_vip - All internal data for one instance of device
|
|
* @v4l2_dev: device registered in v4l layer
|
|
* @video_dev: properties of our device
|
|
* @pdev: PCI device
|
|
* @adapter: contains I2C adapter information
|
|
* @register_save_area: All relevant register are saved here during suspend
|
|
* @decoder: contains information about video DAC
|
|
* @ctrl_hdl: handler for control framework
|
|
* @format: pixel format, fixed UYVY
|
|
* @std: video standard (e.g. PAL/NTSC)
|
|
* @input: input line for video signal ( 0 or 1 )
|
|
* @disabled: Device is in power down state
|
|
* @slock: for excluse acces of registers
|
|
* @alloc_ctx: context for videobuf2
|
|
* @vb_vidq: queue maintained by videobuf2 layer
|
|
* @buffer_list: list of buffer in use
|
|
* @sequence: sequence number of acquired buffer
|
|
* @active: current active buffer
|
|
* @lock: used in videobuf2 callback
|
|
* @tcount: Number of top frames
|
|
* @bcount: Number of bottom frames
|
|
* @overflow: Number of FIFO overflows
|
|
* @iomem: hardware base address
|
|
* @config: I2C and gpio config from platform
|
|
*
|
|
* All non-local data is accessed via this structure.
|
|
*/
|
|
struct sta2x11_vip {
|
|
struct v4l2_device v4l2_dev;
|
|
struct video_device *video_dev;
|
|
struct pci_dev *pdev;
|
|
struct i2c_adapter *adapter;
|
|
unsigned int register_save_area[IRQ_COUNT + SAVE_COUNT + AUX_COUNT];
|
|
struct v4l2_subdev *decoder;
|
|
struct v4l2_ctrl_handler ctrl_hdl;
|
|
|
|
|
|
struct v4l2_pix_format format;
|
|
v4l2_std_id std;
|
|
unsigned int input;
|
|
int disabled;
|
|
spinlock_t slock;
|
|
|
|
struct vb2_alloc_ctx *alloc_ctx;
|
|
struct vb2_queue vb_vidq;
|
|
struct list_head buffer_list;
|
|
unsigned int sequence;
|
|
struct vip_buffer *active; /* current active buffer */
|
|
spinlock_t lock; /* Used in videobuf2 callback */
|
|
|
|
/* Interrupt counters */
|
|
int tcount, bcount;
|
|
int overflow;
|
|
|
|
void *iomem; /* I/O Memory */
|
|
struct vip_config *config;
|
|
};
|
|
|
|
static const unsigned int registers_to_save[AUX_COUNT] = {
|
|
DVP_HLFLN, DVP_RGB, DVP_PKZ
|
|
};
|
|
|
|
static struct v4l2_pix_format formats_50[] = {
|
|
{ /*PAL interlaced */
|
|
.width = 720,
|
|
.height = 576,
|
|
.pixelformat = V4L2_PIX_FMT_UYVY,
|
|
.field = V4L2_FIELD_INTERLACED,
|
|
.bytesperline = 720 * 2,
|
|
.sizeimage = 720 * 2 * 576,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M},
|
|
{ /*PAL top */
|
|
.width = 720,
|
|
.height = 288,
|
|
.pixelformat = V4L2_PIX_FMT_UYVY,
|
|
.field = V4L2_FIELD_TOP,
|
|
.bytesperline = 720 * 2,
|
|
.sizeimage = 720 * 2 * 288,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M},
|
|
{ /*PAL bottom */
|
|
.width = 720,
|
|
.height = 288,
|
|
.pixelformat = V4L2_PIX_FMT_UYVY,
|
|
.field = V4L2_FIELD_BOTTOM,
|
|
.bytesperline = 720 * 2,
|
|
.sizeimage = 720 * 2 * 288,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M},
|
|
|
|
};
|
|
|
|
static struct v4l2_pix_format formats_60[] = {
|
|
{ /*NTSC interlaced */
|
|
.width = 720,
|
|
.height = 480,
|
|
.pixelformat = V4L2_PIX_FMT_UYVY,
|
|
.field = V4L2_FIELD_INTERLACED,
|
|
.bytesperline = 720 * 2,
|
|
.sizeimage = 720 * 2 * 480,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M},
|
|
{ /*NTSC top */
|
|
.width = 720,
|
|
.height = 240,
|
|
.pixelformat = V4L2_PIX_FMT_UYVY,
|
|
.field = V4L2_FIELD_TOP,
|
|
.bytesperline = 720 * 2,
|
|
.sizeimage = 720 * 2 * 240,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M},
|
|
{ /*NTSC bottom */
|
|
.width = 720,
|
|
.height = 240,
|
|
.pixelformat = V4L2_PIX_FMT_UYVY,
|
|
.field = V4L2_FIELD_BOTTOM,
|
|
.bytesperline = 720 * 2,
|
|
.sizeimage = 720 * 2 * 240,
|
|
.colorspace = V4L2_COLORSPACE_SMPTE170M},
|
|
};
|
|
|
|
/* Write VIP register */
|
|
static inline void reg_write(struct sta2x11_vip *vip, unsigned int reg, u32 val)
|
|
{
|
|
iowrite32((val), (vip->iomem)+(reg));
|
|
}
|
|
/* Read VIP register */
|
|
static inline u32 reg_read(struct sta2x11_vip *vip, unsigned int reg)
|
|
{
|
|
return ioread32((vip->iomem)+(reg));
|
|
}
|
|
/* Start DMA acquisition */
|
|
static void start_dma(struct sta2x11_vip *vip, struct vip_buffer *vip_buf)
|
|
{
|
|
unsigned long offset = 0;
|
|
|
|
if (vip->format.field == V4L2_FIELD_INTERLACED)
|
|
offset = vip->format.width * 2;
|
|
|
|
spin_lock_irq(&vip->slock);
|
|
/* Enable acquisition */
|
|
reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) | DVP_CTL_ENA);
|
|
/* Set Top and Bottom Field memory address */
|
|
reg_write(vip, DVP_VTP, (u32)vip_buf->dma);
|
|
reg_write(vip, DVP_VBP, (u32)vip_buf->dma + offset);
|
|
spin_unlock_irq(&vip->slock);
|
|
}
|
|
|
|
/* Fetch the next buffer to activate */
|
|
static void vip_active_buf_next(struct sta2x11_vip *vip)
|
|
{
|
|
/* Get the next buffer */
|
|
spin_lock(&vip->lock);
|
|
if (list_empty(&vip->buffer_list)) {/* No available buffer */
|
|
spin_unlock(&vip->lock);
|
|
return;
|
|
}
|
|
vip->active = list_first_entry(&vip->buffer_list,
|
|
struct vip_buffer,
|
|
list);
|
|
/* Reset Top and Bottom counter */
|
|
vip->tcount = 0;
|
|
vip->bcount = 0;
|
|
spin_unlock(&vip->lock);
|
|
if (vb2_is_streaming(&vip->vb_vidq)) { /* streaming is on */
|
|
start_dma(vip, vip->active); /* start dma capture */
|
|
}
|
|
}
|
|
|
|
|
|
/* Videobuf2 Operations */
|
|
static int queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
|
|
unsigned int *nbuffers, unsigned int *nplanes,
|
|
unsigned int sizes[], void *alloc_ctxs[])
|
|
{
|
|
struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
|
|
|
|
if (!(*nbuffers) || *nbuffers < MAX_FRAMES)
|
|
*nbuffers = MAX_FRAMES;
|
|
|
|
*nplanes = 1;
|
|
sizes[0] = vip->format.sizeimage;
|
|
alloc_ctxs[0] = vip->alloc_ctx;
|
|
|
|
vip->sequence = 0;
|
|
vip->active = NULL;
|
|
vip->tcount = 0;
|
|
vip->bcount = 0;
|
|
|
|
return 0;
|
|
};
|
|
static int buffer_init(struct vb2_buffer *vb)
|
|
{
|
|
struct vip_buffer *vip_buf = to_vip_buffer(vb);
|
|
|
|
vip_buf->dma = vb2_dma_contig_plane_dma_addr(vb, 0);
|
|
INIT_LIST_HEAD(&vip_buf->list);
|
|
return 0;
|
|
}
|
|
|
|
static int buffer_prepare(struct vb2_buffer *vb)
|
|
{
|
|
struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
|
|
struct vip_buffer *vip_buf = to_vip_buffer(vb);
|
|
unsigned long size;
|
|
|
|
size = vip->format.sizeimage;
|
|
if (vb2_plane_size(vb, 0) < size) {
|
|
v4l2_err(&vip->v4l2_dev, "buffer too small (%lu < %lu)\n",
|
|
vb2_plane_size(vb, 0), size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
vb2_set_plane_payload(&vip_buf->vb, 0, size);
|
|
|
|
return 0;
|
|
}
|
|
static void buffer_queue(struct vb2_buffer *vb)
|
|
{
|
|
struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
|
|
struct vip_buffer *vip_buf = to_vip_buffer(vb);
|
|
|
|
spin_lock(&vip->lock);
|
|
list_add_tail(&vip_buf->list, &vip->buffer_list);
|
|
if (!vip->active) { /* No active buffer, active the first one */
|
|
vip->active = list_first_entry(&vip->buffer_list,
|
|
struct vip_buffer,
|
|
list);
|
|
if (vb2_is_streaming(&vip->vb_vidq)) /* streaming is on */
|
|
start_dma(vip, vip_buf); /* start dma capture */
|
|
}
|
|
spin_unlock(&vip->lock);
|
|
}
|
|
static int buffer_finish(struct vb2_buffer *vb)
|
|
{
|
|
struct sta2x11_vip *vip = vb2_get_drv_priv(vb->vb2_queue);
|
|
struct vip_buffer *vip_buf = to_vip_buffer(vb);
|
|
|
|
/* Buffer handled, remove it from the list */
|
|
spin_lock(&vip->lock);
|
|
list_del_init(&vip_buf->list);
|
|
spin_unlock(&vip->lock);
|
|
|
|
vip_active_buf_next(vip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int start_streaming(struct vb2_queue *vq, unsigned int count)
|
|
{
|
|
struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
|
|
|
|
spin_lock_irq(&vip->slock);
|
|
/* Enable interrupt VSYNC Top and Bottom*/
|
|
reg_write(vip, DVP_ITM, DVP_IT_VSB | DVP_IT_VST);
|
|
spin_unlock_irq(&vip->slock);
|
|
|
|
if (count)
|
|
start_dma(vip, vip->active);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* abort streaming and wait for last buffer */
|
|
static int stop_streaming(struct vb2_queue *vq)
|
|
{
|
|
struct sta2x11_vip *vip = vb2_get_drv_priv(vq);
|
|
struct vip_buffer *vip_buf, *node;
|
|
|
|
/* Disable acquisition */
|
|
reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
|
|
/* Disable all interrupts */
|
|
reg_write(vip, DVP_ITM, 0);
|
|
|
|
/* Release all active buffers */
|
|
spin_lock(&vip->lock);
|
|
list_for_each_entry_safe(vip_buf, node, &vip->buffer_list, list) {
|
|
vb2_buffer_done(&vip_buf->vb, VB2_BUF_STATE_ERROR);
|
|
list_del(&vip_buf->list);
|
|
}
|
|
spin_unlock(&vip->lock);
|
|
return 0;
|
|
}
|
|
|
|
static struct vb2_ops vip_video_qops = {
|
|
.queue_setup = queue_setup,
|
|
.buf_init = buffer_init,
|
|
.buf_prepare = buffer_prepare,
|
|
.buf_finish = buffer_finish,
|
|
.buf_queue = buffer_queue,
|
|
.start_streaming = start_streaming,
|
|
.stop_streaming = stop_streaming,
|
|
};
|
|
|
|
|
|
/* File Operations */
|
|
static const struct v4l2_file_operations vip_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = v4l2_fh_open,
|
|
.release = vb2_fop_release,
|
|
.unlocked_ioctl = video_ioctl2,
|
|
.read = vb2_fop_read,
|
|
.mmap = vb2_fop_mmap,
|
|
.poll = vb2_fop_poll
|
|
};
|
|
|
|
|
|
/**
|
|
* vidioc_querycap - return capabilities of device
|
|
* @file: descriptor of device
|
|
* @cap: contains return values
|
|
*
|
|
* the capabilities of the device are returned
|
|
*
|
|
* return value: 0, no error.
|
|
*/
|
|
static int vidioc_querycap(struct file *file, void *priv,
|
|
struct v4l2_capability *cap)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
|
|
strcpy(cap->driver, KBUILD_MODNAME);
|
|
strcpy(cap->card, KBUILD_MODNAME);
|
|
snprintf(cap->bus_info, sizeof(cap->bus_info), "PCI:%s",
|
|
pci_name(vip->pdev));
|
|
cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE |
|
|
V4L2_CAP_STREAMING;
|
|
cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_s_std - set video standard
|
|
* @file: descriptor of device
|
|
* @std: contains standard to be set
|
|
*
|
|
* the video standard is set
|
|
*
|
|
* return value: 0, no error.
|
|
*
|
|
* -EIO, no input signal detected
|
|
*
|
|
* other, returned from video DAC.
|
|
*/
|
|
static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id std)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
v4l2_std_id oldstd = vip->std, newstd;
|
|
int status;
|
|
|
|
if (V4L2_STD_ALL == std) {
|
|
v4l2_subdev_call(vip->decoder, core, s_std, std);
|
|
ssleep(2);
|
|
v4l2_subdev_call(vip->decoder, video, querystd, &newstd);
|
|
v4l2_subdev_call(vip->decoder, video, g_input_status, &status);
|
|
if (status & V4L2_IN_ST_NO_SIGNAL)
|
|
return -EIO;
|
|
std = vip->std = newstd;
|
|
if (oldstd != std) {
|
|
if (V4L2_STD_525_60 & std)
|
|
vip->format = formats_60[0];
|
|
else
|
|
vip->format = formats_50[0];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (oldstd != std) {
|
|
if (V4L2_STD_525_60 & std)
|
|
vip->format = formats_60[0];
|
|
else
|
|
vip->format = formats_50[0];
|
|
}
|
|
|
|
return v4l2_subdev_call(vip->decoder, core, s_std, std);
|
|
}
|
|
|
|
/**
|
|
* vidioc_g_std - get video standard
|
|
* @file: descriptor of device
|
|
* @std: contains return values
|
|
*
|
|
* the current video standard is returned
|
|
*
|
|
* return value: 0, no error.
|
|
*/
|
|
static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *std)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
|
|
*std = vip->std;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_querystd - get possible video standards
|
|
* @file: descriptor of device
|
|
* @std: contains return values
|
|
*
|
|
* all possible video standards are returned
|
|
*
|
|
* return value: delivered by video DAC routine.
|
|
*/
|
|
static int vidioc_querystd(struct file *file, void *priv, v4l2_std_id *std)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
|
|
return v4l2_subdev_call(vip->decoder, video, querystd, std);
|
|
}
|
|
|
|
static int vidioc_enum_input(struct file *file, void *priv,
|
|
struct v4l2_input *inp)
|
|
{
|
|
if (inp->index > 1)
|
|
return -EINVAL;
|
|
|
|
inp->type = V4L2_INPUT_TYPE_CAMERA;
|
|
inp->std = V4L2_STD_ALL;
|
|
sprintf(inp->name, "Camera %u", inp->index);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_s_input - set input line
|
|
* @file: descriptor of device
|
|
* @i: new input line number
|
|
*
|
|
* the current active input line is set
|
|
*
|
|
* return value: 0, no error.
|
|
*
|
|
* -EINVAL, line number out of range
|
|
*/
|
|
static int vidioc_s_input(struct file *file, void *priv, unsigned int i)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
int ret;
|
|
|
|
if (i > 1)
|
|
return -EINVAL;
|
|
ret = v4l2_subdev_call(vip->decoder, video, s_routing, i, 0, 0);
|
|
|
|
if (!ret)
|
|
vip->input = i;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_g_input - return input line
|
|
* @file: descriptor of device
|
|
* @i: returned input line number
|
|
*
|
|
* the current active input line is returned
|
|
*
|
|
* return value: always 0.
|
|
*/
|
|
static int vidioc_g_input(struct file *file, void *priv, unsigned int *i)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
|
|
*i = vip->input;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_enum_fmt_vid_cap - return video capture format
|
|
* @f: returned format information
|
|
*
|
|
* returns name and format of video capture
|
|
* Only UYVY is supported by hardware.
|
|
*
|
|
* return value: always 0.
|
|
*/
|
|
static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_fmtdesc *f)
|
|
{
|
|
|
|
if (f->index != 0)
|
|
return -EINVAL;
|
|
|
|
strcpy(f->description, "4:2:2, packed, UYVY");
|
|
f->pixelformat = V4L2_PIX_FMT_UYVY;
|
|
f->flags = 0;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_try_fmt_vid_cap - set video capture format
|
|
* @file: descriptor of device
|
|
* @f: new format
|
|
*
|
|
* new video format is set which includes width and
|
|
* field type. width is fixed to 720, no scaling.
|
|
* Only UYVY is supported by this hardware.
|
|
* the minimum height is 200, the maximum is 576 (PAL)
|
|
*
|
|
* return value: 0, no error
|
|
*
|
|
* -EINVAL, pixel or field format not supported
|
|
*
|
|
*/
|
|
static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
int interlace_lim;
|
|
|
|
if (V4L2_PIX_FMT_UYVY != f->fmt.pix.pixelformat) {
|
|
v4l2_warn(&vip->v4l2_dev, "Invalid format, only UYVY supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (V4L2_STD_525_60 & vip->std)
|
|
interlace_lim = 240;
|
|
else
|
|
interlace_lim = 288;
|
|
|
|
switch (f->fmt.pix.field) {
|
|
default:
|
|
case V4L2_FIELD_ANY:
|
|
if (interlace_lim < f->fmt.pix.height)
|
|
f->fmt.pix.field = V4L2_FIELD_INTERLACED;
|
|
else
|
|
f->fmt.pix.field = V4L2_FIELD_BOTTOM;
|
|
break;
|
|
case V4L2_FIELD_TOP:
|
|
case V4L2_FIELD_BOTTOM:
|
|
if (interlace_lim < f->fmt.pix.height)
|
|
f->fmt.pix.height = interlace_lim;
|
|
break;
|
|
case V4L2_FIELD_INTERLACED:
|
|
break;
|
|
}
|
|
|
|
/* It is the only supported format */
|
|
f->fmt.pix.pixelformat = V4L2_PIX_FMT_UYVY;
|
|
f->fmt.pix.height &= ~1;
|
|
if (2 * interlace_lim < f->fmt.pix.height)
|
|
f->fmt.pix.height = 2 * interlace_lim;
|
|
if (200 > f->fmt.pix.height)
|
|
f->fmt.pix.height = 200;
|
|
f->fmt.pix.width = 720;
|
|
f->fmt.pix.bytesperline = f->fmt.pix.width * 2;
|
|
f->fmt.pix.sizeimage = f->fmt.pix.width * 2 * f->fmt.pix.height;
|
|
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
|
|
f->fmt.pix.priv = 0;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_s_fmt_vid_cap - set current video format parameters
|
|
* @file: descriptor of device
|
|
* @f: returned format information
|
|
*
|
|
* set new capture format
|
|
* return value: 0, no error
|
|
*
|
|
* other, delivered by video DAC routine.
|
|
*/
|
|
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
unsigned int t_stop, b_stop, pitch;
|
|
int ret;
|
|
|
|
ret = vidioc_try_fmt_vid_cap(file, priv, f);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (vb2_is_busy(&vip->vb_vidq)) {
|
|
/* Can't change format during acquisition */
|
|
v4l2_err(&vip->v4l2_dev, "device busy\n");
|
|
return -EBUSY;
|
|
}
|
|
vip->format = f->fmt.pix;
|
|
switch (vip->format.field) {
|
|
case V4L2_FIELD_INTERLACED:
|
|
t_stop = ((vip->format.height / 2 - 1) << 16) |
|
|
(2 * vip->format.width - 1);
|
|
b_stop = t_stop;
|
|
pitch = 4 * vip->format.width;
|
|
break;
|
|
case V4L2_FIELD_TOP:
|
|
t_stop = ((vip->format.height - 1) << 16) |
|
|
(2 * vip->format.width - 1);
|
|
b_stop = (0 << 16) | (2 * vip->format.width - 1);
|
|
pitch = 2 * vip->format.width;
|
|
break;
|
|
case V4L2_FIELD_BOTTOM:
|
|
t_stop = (0 << 16) | (2 * vip->format.width - 1);
|
|
b_stop = (vip->format.height << 16) |
|
|
(2 * vip->format.width - 1);
|
|
pitch = 2 * vip->format.width;
|
|
break;
|
|
default:
|
|
v4l2_err(&vip->v4l2_dev, "unknown field format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irq(&vip->slock);
|
|
/* Y-X Top Field Offset */
|
|
reg_write(vip, DVP_TFO, 0);
|
|
/* Y-X Bottom Field Offset */
|
|
reg_write(vip, DVP_BFO, 0);
|
|
/* Y-X Top Field Stop*/
|
|
reg_write(vip, DVP_TFS, t_stop);
|
|
/* Y-X Bottom Field Stop */
|
|
reg_write(vip, DVP_BFS, b_stop);
|
|
/* Video Memory Pitch */
|
|
reg_write(vip, DVP_VMP, pitch);
|
|
spin_unlock_irq(&vip->slock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vidioc_g_fmt_vid_cap - get current video format parameters
|
|
* @file: descriptor of device
|
|
* @f: contains format information
|
|
*
|
|
* returns current video format parameters
|
|
*
|
|
* return value: 0, always successful
|
|
*/
|
|
static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
|
|
struct v4l2_format *f)
|
|
{
|
|
struct sta2x11_vip *vip = video_drvdata(file);
|
|
|
|
f->fmt.pix = vip->format;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_ioctl_ops vip_ioctl_ops = {
|
|
.vidioc_querycap = vidioc_querycap,
|
|
/* FMT handling */
|
|
.vidioc_enum_fmt_vid_cap = vidioc_enum_fmt_vid_cap,
|
|
.vidioc_g_fmt_vid_cap = vidioc_g_fmt_vid_cap,
|
|
.vidioc_s_fmt_vid_cap = vidioc_s_fmt_vid_cap,
|
|
.vidioc_try_fmt_vid_cap = vidioc_try_fmt_vid_cap,
|
|
/* Buffer handlers */
|
|
.vidioc_create_bufs = vb2_ioctl_create_bufs,
|
|
.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
|
|
.vidioc_reqbufs = vb2_ioctl_reqbufs,
|
|
.vidioc_querybuf = vb2_ioctl_querybuf,
|
|
.vidioc_qbuf = vb2_ioctl_qbuf,
|
|
.vidioc_dqbuf = vb2_ioctl_dqbuf,
|
|
/* Stream on/off */
|
|
.vidioc_streamon = vb2_ioctl_streamon,
|
|
.vidioc_streamoff = vb2_ioctl_streamoff,
|
|
/* Standard handling */
|
|
.vidioc_g_std = vidioc_g_std,
|
|
.vidioc_s_std = vidioc_s_std,
|
|
.vidioc_querystd = vidioc_querystd,
|
|
/* Input handling */
|
|
.vidioc_enum_input = vidioc_enum_input,
|
|
.vidioc_g_input = vidioc_g_input,
|
|
.vidioc_s_input = vidioc_s_input,
|
|
/* Log status ioctl */
|
|
.vidioc_log_status = v4l2_ctrl_log_status,
|
|
/* Event handling */
|
|
.vidioc_subscribe_event = v4l2_ctrl_subscribe_event,
|
|
.vidioc_unsubscribe_event = v4l2_event_unsubscribe,
|
|
};
|
|
|
|
static struct video_device video_dev_template = {
|
|
.name = KBUILD_MODNAME,
|
|
.release = video_device_release,
|
|
.fops = &vip_fops,
|
|
.ioctl_ops = &vip_ioctl_ops,
|
|
.tvnorms = V4L2_STD_ALL,
|
|
};
|
|
|
|
/**
|
|
* vip_irq - interrupt routine
|
|
* @irq: Number of interrupt ( not used, correct number is assumed )
|
|
* @vip: local data structure containing all information
|
|
*
|
|
* check for both frame interrupts set ( top and bottom ).
|
|
* check FIFO overflow, but limit number of log messages after open.
|
|
* signal a complete buffer if done
|
|
*
|
|
* return value: IRQ_NONE, interrupt was not generated by VIP
|
|
*
|
|
* IRQ_HANDLED, interrupt done.
|
|
*/
|
|
static irqreturn_t vip_irq(int irq, struct sta2x11_vip *vip)
|
|
{
|
|
unsigned int status;
|
|
|
|
status = reg_read(vip, DVP_ITS);
|
|
|
|
if (!status) /* No interrupt to handle */
|
|
return IRQ_NONE;
|
|
|
|
if (status & DVP_IT_FIFO)
|
|
if (vip->overflow++ > 5)
|
|
pr_info("VIP: fifo overflow\n");
|
|
|
|
if ((status & DVP_IT_VST) && (status & DVP_IT_VSB)) {
|
|
/* this is bad, we are too slow, hope the condition is gone
|
|
* on the next frame */
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (status & DVP_IT_VST)
|
|
if ((++vip->tcount) < 2)
|
|
return IRQ_HANDLED;
|
|
if (status & DVP_IT_VSB) {
|
|
vip->bcount++;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (vip->active) { /* Acquisition is over on this buffer */
|
|
/* Disable acquisition */
|
|
reg_write(vip, DVP_CTL, reg_read(vip, DVP_CTL) & ~DVP_CTL_ENA);
|
|
/* Remove the active buffer from the list */
|
|
do_gettimeofday(&vip->active->vb.v4l2_buf.timestamp);
|
|
vip->active->vb.v4l2_buf.sequence = vip->sequence++;
|
|
vb2_buffer_done(&vip->active->vb, VB2_BUF_STATE_DONE);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void sta2x11_vip_init_register(struct sta2x11_vip *vip)
|
|
{
|
|
/* Register initialization */
|
|
spin_lock_irq(&vip->slock);
|
|
/* Clean interrupt */
|
|
reg_read(vip, DVP_ITS);
|
|
/* Enable Half Line per vertical */
|
|
reg_write(vip, DVP_HLFLN, DVP_HLFLN_SD);
|
|
/* Reset VIP control */
|
|
reg_write(vip, DVP_CTL, DVP_CTL_RST);
|
|
/* Clear VIP control */
|
|
reg_write(vip, DVP_CTL, 0);
|
|
spin_unlock_irq(&vip->slock);
|
|
}
|
|
static void sta2x11_vip_clear_register(struct sta2x11_vip *vip)
|
|
{
|
|
spin_lock_irq(&vip->slock);
|
|
/* Disable interrupt */
|
|
reg_write(vip, DVP_ITM, 0);
|
|
/* Reset VIP Control */
|
|
reg_write(vip, DVP_CTL, DVP_CTL_RST);
|
|
/* Clear VIP Control */
|
|
reg_write(vip, DVP_CTL, 0);
|
|
/* Clean VIP Interrupt */
|
|
reg_read(vip, DVP_ITS);
|
|
spin_unlock_irq(&vip->slock);
|
|
}
|
|
static int sta2x11_vip_init_buffer(struct sta2x11_vip *vip)
|
|
{
|
|
int err;
|
|
|
|
err = dma_set_coherent_mask(&vip->pdev->dev, DMA_BIT_MASK(29));
|
|
if (err) {
|
|
v4l2_err(&vip->v4l2_dev, "Cannot configure coherent mask");
|
|
return err;
|
|
}
|
|
memset(&vip->vb_vidq, 0, sizeof(struct vb2_queue));
|
|
vip->vb_vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
|
|
vip->vb_vidq.io_modes = VB2_MMAP | VB2_READ;
|
|
vip->vb_vidq.drv_priv = vip;
|
|
vip->vb_vidq.buf_struct_size = sizeof(struct vip_buffer);
|
|
vip->vb_vidq.ops = &vip_video_qops;
|
|
vip->vb_vidq.mem_ops = &vb2_dma_contig_memops;
|
|
err = vb2_queue_init(&vip->vb_vidq);
|
|
if (err)
|
|
return err;
|
|
INIT_LIST_HEAD(&vip->buffer_list);
|
|
spin_lock_init(&vip->lock);
|
|
|
|
|
|
vip->alloc_ctx = vb2_dma_contig_init_ctx(&vip->pdev->dev);
|
|
if (IS_ERR(vip->alloc_ctx)) {
|
|
v4l2_err(&vip->v4l2_dev, "Can't allocate buffer context");
|
|
return PTR_ERR(vip->alloc_ctx);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
static void sta2x11_vip_release_buffer(struct sta2x11_vip *vip)
|
|
{
|
|
vb2_dma_contig_cleanup_ctx(vip->alloc_ctx);
|
|
}
|
|
static int sta2x11_vip_init_controls(struct sta2x11_vip *vip)
|
|
{
|
|
/*
|
|
* Inititialize an empty control so VIP can inerithing controls
|
|
* from ADV7180
|
|
*/
|
|
v4l2_ctrl_handler_init(&vip->ctrl_hdl, 0);
|
|
|
|
vip->v4l2_dev.ctrl_handler = &vip->ctrl_hdl;
|
|
if (vip->ctrl_hdl.error) {
|
|
int err = vip->ctrl_hdl.error;
|
|
|
|
v4l2_ctrl_handler_free(&vip->ctrl_hdl);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vip_gpio_reserve - reserve gpio pin
|
|
* @dev: device
|
|
* @pin: GPIO pin number
|
|
* @dir: direction, input or output
|
|
* @name: GPIO pin name
|
|
*
|
|
*/
|
|
static int vip_gpio_reserve(struct device *dev, int pin, int dir,
|
|
const char *name)
|
|
{
|
|
int ret;
|
|
|
|
if (pin == -1)
|
|
return 0;
|
|
|
|
ret = gpio_request(pin, name);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to allocate pin %d (%s)\n", pin, name);
|
|
return ret;
|
|
}
|
|
|
|
ret = gpio_direction_output(pin, dir);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to set direction for pin %d (%s)\n",
|
|
pin, name);
|
|
gpio_free(pin);
|
|
return ret;
|
|
}
|
|
|
|
ret = gpio_export(pin, false);
|
|
if (ret) {
|
|
dev_err(dev, "Failed to export pin %d (%s)\n", pin, name);
|
|
gpio_free(pin);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* vip_gpio_release - release gpio pin
|
|
* @dev: device
|
|
* @pin: GPIO pin number
|
|
* @name: GPIO pin name
|
|
*
|
|
*/
|
|
static void vip_gpio_release(struct device *dev, int pin, const char *name)
|
|
{
|
|
if (pin != -1) {
|
|
dev_dbg(dev, "releasing pin %d (%s)\n", pin, name);
|
|
gpio_unexport(pin);
|
|
gpio_free(pin);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* sta2x11_vip_init_one - init one instance of video device
|
|
* @pdev: PCI device
|
|
* @ent: (not used)
|
|
*
|
|
* allocate reset pins for DAC.
|
|
* Reset video DAC, this is done via reset line.
|
|
* allocate memory for managing device
|
|
* request interrupt
|
|
* map IO region
|
|
* register device
|
|
* find and initialize video DAC
|
|
*
|
|
* return value: 0, no error
|
|
*
|
|
* -ENOMEM, no memory
|
|
*
|
|
* -ENODEV, device could not be detected or registered
|
|
*/
|
|
static int sta2x11_vip_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
int ret;
|
|
struct sta2x11_vip *vip;
|
|
struct vip_config *config;
|
|
|
|
/* Check if hardware support 26-bit DMA */
|
|
if (dma_set_mask(&pdev->dev, DMA_BIT_MASK(26))) {
|
|
dev_err(&pdev->dev, "26-bit DMA addressing not available\n");
|
|
return -EINVAL;
|
|
}
|
|
/* Enable PCI */
|
|
ret = pci_enable_device(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Get VIP platform data */
|
|
config = dev_get_platdata(&pdev->dev);
|
|
if (!config) {
|
|
dev_info(&pdev->dev, "VIP slot disabled\n");
|
|
ret = -EINVAL;
|
|
goto disable;
|
|
}
|
|
|
|
/* Power configuration */
|
|
ret = vip_gpio_reserve(&pdev->dev, config->pwr_pin, 0,
|
|
config->pwr_name);
|
|
if (ret)
|
|
goto disable;
|
|
|
|
if (config->reset_pin >= 0) {
|
|
ret = vip_gpio_reserve(&pdev->dev, config->reset_pin, 0,
|
|
config->reset_name);
|
|
if (ret) {
|
|
vip_gpio_release(&pdev->dev, config->pwr_pin,
|
|
config->pwr_name);
|
|
goto disable;
|
|
}
|
|
}
|
|
if (config->pwr_pin != -1) {
|
|
/* Datasheet says 5ms between PWR and RST */
|
|
usleep_range(5000, 25000);
|
|
ret = gpio_direction_output(config->pwr_pin, 1);
|
|
}
|
|
|
|
if (config->reset_pin != -1) {
|
|
/* Datasheet says 5ms between PWR and RST */
|
|
usleep_range(5000, 25000);
|
|
ret = gpio_direction_output(config->reset_pin, 1);
|
|
}
|
|
usleep_range(5000, 25000);
|
|
|
|
/* Allocate a new VIP instance */
|
|
vip = kzalloc(sizeof(struct sta2x11_vip), GFP_KERNEL);
|
|
if (!vip) {
|
|
ret = -ENOMEM;
|
|
goto release_gpios;
|
|
}
|
|
vip->pdev = pdev;
|
|
vip->std = V4L2_STD_PAL;
|
|
vip->format = formats_50[0];
|
|
vip->config = config;
|
|
|
|
ret = sta2x11_vip_init_controls(vip);
|
|
if (ret)
|
|
goto free_mem;
|
|
if (v4l2_device_register(&pdev->dev, &vip->v4l2_dev))
|
|
goto free_mem;
|
|
|
|
dev_dbg(&pdev->dev, "BAR #0 at 0x%lx 0x%lx irq %d\n",
|
|
(unsigned long)pci_resource_start(pdev, 0),
|
|
(unsigned long)pci_resource_len(pdev, 0), pdev->irq);
|
|
|
|
pci_set_master(pdev);
|
|
|
|
ret = pci_request_regions(pdev, KBUILD_MODNAME);
|
|
if (ret)
|
|
goto unreg;
|
|
|
|
vip->iomem = pci_iomap(pdev, 0, 0x100);
|
|
if (!vip->iomem) {
|
|
ret = -ENOMEM;
|
|
goto release;
|
|
}
|
|
|
|
pci_enable_msi(pdev);
|
|
|
|
/* Initialize buffer */
|
|
ret = sta2x11_vip_init_buffer(vip);
|
|
if (ret)
|
|
goto unmap;
|
|
|
|
spin_lock_init(&vip->slock);
|
|
|
|
ret = request_irq(pdev->irq,
|
|
(irq_handler_t) vip_irq,
|
|
IRQF_SHARED, KBUILD_MODNAME, vip);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "request_irq failed\n");
|
|
ret = -ENODEV;
|
|
goto release_buf;
|
|
}
|
|
|
|
/* Alloc, initialize and register video device */
|
|
vip->video_dev = video_device_alloc();
|
|
if (!vip->video_dev) {
|
|
ret = -ENOMEM;
|
|
goto release_irq;
|
|
}
|
|
|
|
vip->video_dev = &video_dev_template;
|
|
vip->video_dev->v4l2_dev = &vip->v4l2_dev;
|
|
vip->video_dev->queue = &vip->vb_vidq;
|
|
set_bit(V4L2_FL_USE_FH_PRIO, &vip->video_dev->flags);
|
|
video_set_drvdata(vip->video_dev, vip);
|
|
|
|
ret = video_register_device(vip->video_dev, VFL_TYPE_GRABBER, -1);
|
|
if (ret)
|
|
goto vrelease;
|
|
|
|
/* Get ADV7180 subdevice */
|
|
vip->adapter = i2c_get_adapter(vip->config->i2c_id);
|
|
if (!vip->adapter) {
|
|
ret = -ENODEV;
|
|
dev_err(&pdev->dev, "no I2C adapter found\n");
|
|
goto vunreg;
|
|
}
|
|
|
|
vip->decoder = v4l2_i2c_new_subdev(&vip->v4l2_dev, vip->adapter,
|
|
"adv7180", vip->config->i2c_addr,
|
|
NULL);
|
|
if (!vip->decoder) {
|
|
ret = -ENODEV;
|
|
dev_err(&pdev->dev, "no decoder found\n");
|
|
goto vunreg;
|
|
}
|
|
|
|
i2c_put_adapter(vip->adapter);
|
|
v4l2_subdev_call(vip->decoder, core, init, 0);
|
|
|
|
sta2x11_vip_init_register(vip);
|
|
|
|
dev_info(&pdev->dev, "STA2X11 Video Input Port (VIP) loaded\n");
|
|
return 0;
|
|
|
|
vunreg:
|
|
video_set_drvdata(vip->video_dev, NULL);
|
|
vrelease:
|
|
if (video_is_registered(vip->video_dev))
|
|
video_unregister_device(vip->video_dev);
|
|
else
|
|
video_device_release(vip->video_dev);
|
|
release_irq:
|
|
free_irq(pdev->irq, vip);
|
|
release_buf:
|
|
sta2x11_vip_release_buffer(vip);
|
|
pci_disable_msi(pdev);
|
|
unmap:
|
|
vb2_queue_release(&vip->vb_vidq);
|
|
pci_iounmap(pdev, vip->iomem);
|
|
release:
|
|
pci_release_regions(pdev);
|
|
unreg:
|
|
v4l2_device_unregister(&vip->v4l2_dev);
|
|
free_mem:
|
|
kfree(vip);
|
|
release_gpios:
|
|
vip_gpio_release(&pdev->dev, config->reset_pin, config->reset_name);
|
|
vip_gpio_release(&pdev->dev, config->pwr_pin, config->pwr_name);
|
|
disable:
|
|
/*
|
|
* do not call pci_disable_device on sta2x11 because it break all
|
|
* other Bus masters on this EP
|
|
*/
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* sta2x11_vip_remove_one - release device
|
|
* @pdev: PCI device
|
|
*
|
|
* Undo everything done in .._init_one
|
|
*
|
|
* unregister video device
|
|
* free interrupt
|
|
* unmap ioadresses
|
|
* free memory
|
|
* free GPIO pins
|
|
*/
|
|
static void sta2x11_vip_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
|
|
struct sta2x11_vip *vip =
|
|
container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
|
|
|
|
sta2x11_vip_clear_register(vip);
|
|
|
|
video_set_drvdata(vip->video_dev, NULL);
|
|
video_unregister_device(vip->video_dev);
|
|
/*do not call video_device_release() here, is already done */
|
|
free_irq(pdev->irq, vip);
|
|
pci_disable_msi(pdev);
|
|
vb2_queue_release(&vip->vb_vidq);
|
|
pci_iounmap(pdev, vip->iomem);
|
|
pci_release_regions(pdev);
|
|
|
|
v4l2_device_unregister(&vip->v4l2_dev);
|
|
|
|
vip_gpio_release(&pdev->dev, vip->config->pwr_pin,
|
|
vip->config->pwr_name);
|
|
vip_gpio_release(&pdev->dev, vip->config->reset_pin,
|
|
vip->config->reset_name);
|
|
|
|
kfree(vip);
|
|
/*
|
|
* do not call pci_disable_device on sta2x11 because it break all
|
|
* other Bus masters on this EP
|
|
*/
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/**
|
|
* sta2x11_vip_suspend - set device into power save mode
|
|
* @pdev: PCI device
|
|
* @state: new state of device
|
|
*
|
|
* all relevant registers are saved and an attempt to set a new state is made.
|
|
*
|
|
* return value: 0 always indicate success,
|
|
* even if device could not be disabled. (workaround for hardware problem)
|
|
*/
|
|
static int sta2x11_vip_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
|
|
struct sta2x11_vip *vip =
|
|
container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
spin_lock_irqsave(&vip->slock, flags);
|
|
vip->register_save_area[0] = reg_read(vip, DVP_CTL);
|
|
reg_write(vip, DVP_CTL, vip->register_save_area[0] & DVP_CTL_DIS);
|
|
vip->register_save_area[SAVE_COUNT] = reg_read(vip, DVP_ITM);
|
|
reg_write(vip, DVP_ITM, 0);
|
|
for (i = 1; i < SAVE_COUNT; i++)
|
|
vip->register_save_area[i] = reg_read(vip, 4 * i);
|
|
for (i = 0; i < AUX_COUNT; i++)
|
|
vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i] =
|
|
reg_read(vip, registers_to_save[i]);
|
|
spin_unlock_irqrestore(&vip->slock, flags);
|
|
/* save pci state */
|
|
pci_save_state(pdev);
|
|
if (pci_set_power_state(pdev, pci_choose_state(pdev, state))) {
|
|
/*
|
|
* do not call pci_disable_device on sta2x11 because it
|
|
* break all other Bus masters on this EP
|
|
*/
|
|
vip->disabled = 1;
|
|
}
|
|
|
|
pr_info("VIP: suspend\n");
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* sta2x11_vip_resume - resume device operation
|
|
* @pdev : PCI device
|
|
*
|
|
* re-enable device, set PCI state to powered and restore registers.
|
|
* resume normal device operation afterwards.
|
|
*
|
|
* return value: 0, no error.
|
|
*
|
|
* other, could not set device to power on state.
|
|
*/
|
|
static int sta2x11_vip_resume(struct pci_dev *pdev)
|
|
{
|
|
struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
|
|
struct sta2x11_vip *vip =
|
|
container_of(v4l2_dev, struct sta2x11_vip, v4l2_dev);
|
|
unsigned long flags;
|
|
int ret, i;
|
|
|
|
pr_info("VIP: resume\n");
|
|
/* restore pci state */
|
|
if (vip->disabled) {
|
|
ret = pci_enable_device(pdev);
|
|
if (ret) {
|
|
pr_warn("VIP: Can't enable device.\n");
|
|
return ret;
|
|
}
|
|
vip->disabled = 0;
|
|
}
|
|
ret = pci_set_power_state(pdev, PCI_D0);
|
|
if (ret) {
|
|
/*
|
|
* do not call pci_disable_device on sta2x11 because it
|
|
* break all other Bus masters on this EP
|
|
*/
|
|
pr_warn("VIP: Can't enable device.\n");
|
|
vip->disabled = 1;
|
|
return ret;
|
|
}
|
|
|
|
pci_restore_state(pdev);
|
|
|
|
spin_lock_irqsave(&vip->slock, flags);
|
|
for (i = 1; i < SAVE_COUNT; i++)
|
|
reg_write(vip, 4 * i, vip->register_save_area[i]);
|
|
for (i = 0; i < AUX_COUNT; i++)
|
|
reg_write(vip, registers_to_save[i],
|
|
vip->register_save_area[SAVE_COUNT + IRQ_COUNT + i]);
|
|
reg_write(vip, DVP_CTL, vip->register_save_area[0]);
|
|
reg_write(vip, DVP_ITM, vip->register_save_area[SAVE_COUNT]);
|
|
spin_unlock_irqrestore(&vip->slock, flags);
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static DEFINE_PCI_DEVICE_TABLE(sta2x11_vip_pci_tbl) = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_STMICRO, PCI_DEVICE_ID_STMICRO_VIP)},
|
|
{0,}
|
|
};
|
|
|
|
static struct pci_driver sta2x11_vip_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.probe = sta2x11_vip_init_one,
|
|
.remove = sta2x11_vip_remove_one,
|
|
.id_table = sta2x11_vip_pci_tbl,
|
|
#ifdef CONFIG_PM
|
|
.suspend = sta2x11_vip_suspend,
|
|
.resume = sta2x11_vip_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init sta2x11_vip_init_module(void)
|
|
{
|
|
return pci_register_driver(&sta2x11_vip_driver);
|
|
}
|
|
|
|
static void __exit sta2x11_vip_exit_module(void)
|
|
{
|
|
pci_unregister_driver(&sta2x11_vip_driver);
|
|
}
|
|
|
|
#ifdef MODULE
|
|
module_init(sta2x11_vip_init_module);
|
|
module_exit(sta2x11_vip_exit_module);
|
|
#else
|
|
late_initcall_sync(sta2x11_vip_init_module);
|
|
#endif
|
|
|
|
MODULE_DESCRIPTION("STA2X11 Video Input Port driver");
|
|
MODULE_AUTHOR("Wind River");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_SUPPORTED_DEVICE("sta2x11 video input");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
MODULE_DEVICE_TABLE(pci, sta2x11_vip_pci_tbl);
|