2321 lines
62 KiB
C
2321 lines
62 KiB
C
/*
|
|
* ahci.c - AHCI SATA support
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2004-2005 Red Hat, Inc.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* AHCI hardware documentation:
|
|
* http://www.intel.com/technology/serialata/pdf/rev1_0.pdf
|
|
* http://www.intel.com/technology/serialata/pdf/rev1_1.pdf
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dmi.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "ahci"
|
|
#define DRV_VERSION "3.0"
|
|
|
|
static int ahci_enable_alpm(struct ata_port *ap,
|
|
enum link_pm policy);
|
|
static void ahci_disable_alpm(struct ata_port *ap);
|
|
|
|
enum {
|
|
AHCI_PCI_BAR = 5,
|
|
AHCI_MAX_PORTS = 32,
|
|
AHCI_MAX_SG = 168, /* hardware max is 64K */
|
|
AHCI_DMA_BOUNDARY = 0xffffffff,
|
|
AHCI_USE_CLUSTERING = 1,
|
|
AHCI_MAX_CMDS = 32,
|
|
AHCI_CMD_SZ = 32,
|
|
AHCI_CMD_SLOT_SZ = AHCI_MAX_CMDS * AHCI_CMD_SZ,
|
|
AHCI_RX_FIS_SZ = 256,
|
|
AHCI_CMD_TBL_CDB = 0x40,
|
|
AHCI_CMD_TBL_HDR_SZ = 0x80,
|
|
AHCI_CMD_TBL_SZ = AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16),
|
|
AHCI_CMD_TBL_AR_SZ = AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS,
|
|
AHCI_PORT_PRIV_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ +
|
|
AHCI_RX_FIS_SZ,
|
|
AHCI_IRQ_ON_SG = (1 << 31),
|
|
AHCI_CMD_ATAPI = (1 << 5),
|
|
AHCI_CMD_WRITE = (1 << 6),
|
|
AHCI_CMD_PREFETCH = (1 << 7),
|
|
AHCI_CMD_RESET = (1 << 8),
|
|
AHCI_CMD_CLR_BUSY = (1 << 10),
|
|
|
|
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
|
|
RX_FIS_SDB = 0x58, /* offset of SDB FIS data */
|
|
RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
|
|
|
|
board_ahci = 0,
|
|
board_ahci_vt8251 = 1,
|
|
board_ahci_ign_iferr = 2,
|
|
board_ahci_sb600 = 3,
|
|
board_ahci_mv = 4,
|
|
|
|
/* global controller registers */
|
|
HOST_CAP = 0x00, /* host capabilities */
|
|
HOST_CTL = 0x04, /* global host control */
|
|
HOST_IRQ_STAT = 0x08, /* interrupt status */
|
|
HOST_PORTS_IMPL = 0x0c, /* bitmap of implemented ports */
|
|
HOST_VERSION = 0x10, /* AHCI spec. version compliancy */
|
|
|
|
/* HOST_CTL bits */
|
|
HOST_RESET = (1 << 0), /* reset controller; self-clear */
|
|
HOST_IRQ_EN = (1 << 1), /* global IRQ enable */
|
|
HOST_AHCI_EN = (1 << 31), /* AHCI enabled */
|
|
|
|
/* HOST_CAP bits */
|
|
HOST_CAP_SSC = (1 << 14), /* Slumber capable */
|
|
HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */
|
|
HOST_CAP_CLO = (1 << 24), /* Command List Override support */
|
|
HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */
|
|
HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
|
|
HOST_CAP_SNTF = (1 << 29), /* SNotification register */
|
|
HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */
|
|
HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */
|
|
|
|
/* registers for each SATA port */
|
|
PORT_LST_ADDR = 0x00, /* command list DMA addr */
|
|
PORT_LST_ADDR_HI = 0x04, /* command list DMA addr hi */
|
|
PORT_FIS_ADDR = 0x08, /* FIS rx buf addr */
|
|
PORT_FIS_ADDR_HI = 0x0c, /* FIS rx buf addr hi */
|
|
PORT_IRQ_STAT = 0x10, /* interrupt status */
|
|
PORT_IRQ_MASK = 0x14, /* interrupt enable/disable mask */
|
|
PORT_CMD = 0x18, /* port command */
|
|
PORT_TFDATA = 0x20, /* taskfile data */
|
|
PORT_SIG = 0x24, /* device TF signature */
|
|
PORT_CMD_ISSUE = 0x38, /* command issue */
|
|
PORT_SCR_STAT = 0x28, /* SATA phy register: SStatus */
|
|
PORT_SCR_CTL = 0x2c, /* SATA phy register: SControl */
|
|
PORT_SCR_ERR = 0x30, /* SATA phy register: SError */
|
|
PORT_SCR_ACT = 0x34, /* SATA phy register: SActive */
|
|
PORT_SCR_NTF = 0x3c, /* SATA phy register: SNotification */
|
|
|
|
/* PORT_IRQ_{STAT,MASK} bits */
|
|
PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */
|
|
PORT_IRQ_TF_ERR = (1 << 30), /* task file error */
|
|
PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */
|
|
PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */
|
|
PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */
|
|
PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */
|
|
PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */
|
|
PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */
|
|
|
|
PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */
|
|
PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */
|
|
PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */
|
|
PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */
|
|
PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */
|
|
PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */
|
|
PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */
|
|
PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
|
|
PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
|
|
|
|
PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
|
|
PORT_IRQ_IF_ERR |
|
|
PORT_IRQ_CONNECT |
|
|
PORT_IRQ_PHYRDY |
|
|
PORT_IRQ_UNK_FIS |
|
|
PORT_IRQ_BAD_PMP,
|
|
PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
|
|
PORT_IRQ_TF_ERR |
|
|
PORT_IRQ_HBUS_DATA_ERR,
|
|
DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
|
|
PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
|
|
PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
|
|
|
|
/* PORT_CMD bits */
|
|
PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */
|
|
PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */
|
|
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
|
|
PORT_CMD_PMP = (1 << 17), /* PMP attached */
|
|
PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */
|
|
PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */
|
|
PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */
|
|
PORT_CMD_CLO = (1 << 3), /* Command list override */
|
|
PORT_CMD_POWER_ON = (1 << 2), /* Power up device */
|
|
PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */
|
|
PORT_CMD_START = (1 << 0), /* Enable port DMA engine */
|
|
|
|
PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */
|
|
PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */
|
|
PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */
|
|
PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */
|
|
|
|
/* hpriv->flags bits */
|
|
AHCI_HFLAG_NO_NCQ = (1 << 0),
|
|
AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */
|
|
AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */
|
|
AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */
|
|
AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */
|
|
AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */
|
|
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
|
|
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
|
|
|
|
/* ap->flags bits */
|
|
|
|
AHCI_FLAG_COMMON = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
|
|
ATA_FLAG_ACPI_SATA | ATA_FLAG_AN |
|
|
ATA_FLAG_IPM,
|
|
AHCI_LFLAG_COMMON = ATA_LFLAG_SKIP_D2H_BSY,
|
|
|
|
ICH_MAP = 0x90, /* ICH MAP register */
|
|
};
|
|
|
|
struct ahci_cmd_hdr {
|
|
__le32 opts;
|
|
__le32 status;
|
|
__le32 tbl_addr;
|
|
__le32 tbl_addr_hi;
|
|
__le32 reserved[4];
|
|
};
|
|
|
|
struct ahci_sg {
|
|
__le32 addr;
|
|
__le32 addr_hi;
|
|
__le32 reserved;
|
|
__le32 flags_size;
|
|
};
|
|
|
|
struct ahci_host_priv {
|
|
unsigned int flags; /* AHCI_HFLAG_* */
|
|
u32 cap; /* cap to use */
|
|
u32 port_map; /* port map to use */
|
|
u32 saved_cap; /* saved initial cap */
|
|
u32 saved_port_map; /* saved initial port_map */
|
|
};
|
|
|
|
struct ahci_port_priv {
|
|
struct ata_link *active_link;
|
|
struct ahci_cmd_hdr *cmd_slot;
|
|
dma_addr_t cmd_slot_dma;
|
|
void *cmd_tbl;
|
|
dma_addr_t cmd_tbl_dma;
|
|
void *rx_fis;
|
|
dma_addr_t rx_fis_dma;
|
|
/* for NCQ spurious interrupt analysis */
|
|
unsigned int ncq_saw_d2h:1;
|
|
unsigned int ncq_saw_dmas:1;
|
|
unsigned int ncq_saw_sdb:1;
|
|
u32 intr_mask; /* interrupts to enable */
|
|
};
|
|
|
|
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
|
|
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
|
|
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
|
|
static void ahci_irq_clear(struct ata_port *ap);
|
|
static int ahci_port_start(struct ata_port *ap);
|
|
static void ahci_port_stop(struct ata_port *ap);
|
|
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
|
|
static void ahci_qc_prep(struct ata_queued_cmd *qc);
|
|
static u8 ahci_check_status(struct ata_port *ap);
|
|
static void ahci_freeze(struct ata_port *ap);
|
|
static void ahci_thaw(struct ata_port *ap);
|
|
static void ahci_pmp_attach(struct ata_port *ap);
|
|
static void ahci_pmp_detach(struct ata_port *ap);
|
|
static void ahci_error_handler(struct ata_port *ap);
|
|
static void ahci_vt8251_error_handler(struct ata_port *ap);
|
|
static void ahci_p5wdh_error_handler(struct ata_port *ap);
|
|
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static int ahci_port_resume(struct ata_port *ap);
|
|
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl);
|
|
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
|
|
u32 opts);
|
|
#ifdef CONFIG_PM
|
|
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg);
|
|
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg);
|
|
static int ahci_pci_device_resume(struct pci_dev *pdev);
|
|
#endif
|
|
|
|
static struct class_device_attribute *ahci_shost_attrs[] = {
|
|
&class_device_attr_link_power_management_policy,
|
|
NULL
|
|
};
|
|
|
|
static struct scsi_host_template ahci_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.change_queue_depth = ata_scsi_change_queue_depth,
|
|
.can_queue = AHCI_MAX_CMDS - 1,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = AHCI_MAX_SG,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = AHCI_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = AHCI_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
.shost_attrs = ahci_shost_attrs,
|
|
};
|
|
|
|
static const struct ata_port_operations ahci_ops = {
|
|
.check_status = ahci_check_status,
|
|
.check_altstatus = ahci_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = ahci_tf_read,
|
|
|
|
.qc_defer = sata_pmp_qc_defer_cmd_switch,
|
|
.qc_prep = ahci_qc_prep,
|
|
.qc_issue = ahci_qc_issue,
|
|
|
|
.irq_clear = ahci_irq_clear,
|
|
|
|
.scr_read = ahci_scr_read,
|
|
.scr_write = ahci_scr_write,
|
|
|
|
.freeze = ahci_freeze,
|
|
.thaw = ahci_thaw,
|
|
|
|
.error_handler = ahci_error_handler,
|
|
.post_internal_cmd = ahci_post_internal_cmd,
|
|
|
|
.pmp_attach = ahci_pmp_attach,
|
|
.pmp_detach = ahci_pmp_detach,
|
|
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = ahci_port_suspend,
|
|
.port_resume = ahci_port_resume,
|
|
#endif
|
|
.enable_pm = ahci_enable_alpm,
|
|
.disable_pm = ahci_disable_alpm,
|
|
|
|
.port_start = ahci_port_start,
|
|
.port_stop = ahci_port_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations ahci_vt8251_ops = {
|
|
.check_status = ahci_check_status,
|
|
.check_altstatus = ahci_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = ahci_tf_read,
|
|
|
|
.qc_defer = sata_pmp_qc_defer_cmd_switch,
|
|
.qc_prep = ahci_qc_prep,
|
|
.qc_issue = ahci_qc_issue,
|
|
|
|
.irq_clear = ahci_irq_clear,
|
|
|
|
.scr_read = ahci_scr_read,
|
|
.scr_write = ahci_scr_write,
|
|
|
|
.freeze = ahci_freeze,
|
|
.thaw = ahci_thaw,
|
|
|
|
.error_handler = ahci_vt8251_error_handler,
|
|
.post_internal_cmd = ahci_post_internal_cmd,
|
|
|
|
.pmp_attach = ahci_pmp_attach,
|
|
.pmp_detach = ahci_pmp_detach,
|
|
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = ahci_port_suspend,
|
|
.port_resume = ahci_port_resume,
|
|
#endif
|
|
|
|
.port_start = ahci_port_start,
|
|
.port_stop = ahci_port_stop,
|
|
};
|
|
|
|
static const struct ata_port_operations ahci_p5wdh_ops = {
|
|
.check_status = ahci_check_status,
|
|
.check_altstatus = ahci_check_status,
|
|
.dev_select = ata_noop_dev_select,
|
|
|
|
.tf_read = ahci_tf_read,
|
|
|
|
.qc_defer = sata_pmp_qc_defer_cmd_switch,
|
|
.qc_prep = ahci_qc_prep,
|
|
.qc_issue = ahci_qc_issue,
|
|
|
|
.irq_clear = ahci_irq_clear,
|
|
|
|
.scr_read = ahci_scr_read,
|
|
.scr_write = ahci_scr_write,
|
|
|
|
.freeze = ahci_freeze,
|
|
.thaw = ahci_thaw,
|
|
|
|
.error_handler = ahci_p5wdh_error_handler,
|
|
.post_internal_cmd = ahci_post_internal_cmd,
|
|
|
|
.pmp_attach = ahci_pmp_attach,
|
|
.pmp_detach = ahci_pmp_detach,
|
|
|
|
#ifdef CONFIG_PM
|
|
.port_suspend = ahci_port_suspend,
|
|
.port_resume = ahci_port_resume,
|
|
#endif
|
|
|
|
.port_start = ahci_port_start,
|
|
.port_stop = ahci_port_stop,
|
|
};
|
|
|
|
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
|
|
|
|
static const struct ata_port_info ahci_port_info[] = {
|
|
/* board_ahci */
|
|
{
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
/* board_ahci_vt8251 */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON | ATA_LFLAG_HRST_TO_RESUME,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_vt8251_ops,
|
|
},
|
|
/* board_ahci_ign_iferr */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_IGN_IRQ_IF_ERR),
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
/* board_ahci_sb600 */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
|
|
AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_PMP),
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
/* board_ahci_mv */
|
|
{
|
|
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
|
|
AHCI_HFLAG_MV_PATA),
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
|
|
.link_flags = AHCI_LFLAG_COMMON,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id ahci_pci_tbl[] = {
|
|
/* Intel */
|
|
{ PCI_VDEVICE(INTEL, 0x2652), board_ahci }, /* ICH6 */
|
|
{ PCI_VDEVICE(INTEL, 0x2653), board_ahci }, /* ICH6M */
|
|
{ PCI_VDEVICE(INTEL, 0x27c1), board_ahci }, /* ICH7 */
|
|
{ PCI_VDEVICE(INTEL, 0x27c5), board_ahci }, /* ICH7M */
|
|
{ PCI_VDEVICE(INTEL, 0x27c3), board_ahci }, /* ICH7R */
|
|
{ PCI_VDEVICE(AL, 0x5288), board_ahci_ign_iferr }, /* ULi M5288 */
|
|
{ PCI_VDEVICE(INTEL, 0x2681), board_ahci }, /* ESB2 */
|
|
{ PCI_VDEVICE(INTEL, 0x2682), board_ahci }, /* ESB2 */
|
|
{ PCI_VDEVICE(INTEL, 0x2683), board_ahci }, /* ESB2 */
|
|
{ PCI_VDEVICE(INTEL, 0x27c6), board_ahci }, /* ICH7-M DH */
|
|
{ PCI_VDEVICE(INTEL, 0x2821), board_ahci }, /* ICH8 */
|
|
{ PCI_VDEVICE(INTEL, 0x2822), board_ahci }, /* ICH8 */
|
|
{ PCI_VDEVICE(INTEL, 0x2824), board_ahci }, /* ICH8 */
|
|
{ PCI_VDEVICE(INTEL, 0x2829), board_ahci }, /* ICH8M */
|
|
{ PCI_VDEVICE(INTEL, 0x282a), board_ahci }, /* ICH8M */
|
|
{ PCI_VDEVICE(INTEL, 0x2922), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2923), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2924), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2925), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2927), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x2929), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292a), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292b), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292c), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x292f), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci }, /* ICH9 */
|
|
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci }, /* ICH9M */
|
|
{ PCI_VDEVICE(INTEL, 0x502a), board_ahci }, /* Tolapai */
|
|
{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
|
|
{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
|
|
{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
|
|
|
|
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
|
|
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
|
|
|
|
/* ATI */
|
|
{ PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */
|
|
{ PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
{ PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */
|
|
|
|
/* VIA */
|
|
{ PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */
|
|
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
|
|
|
|
/* NVIDIA */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0553), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0554), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0555), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0556), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0557), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0558), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0559), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x055a), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x055b), board_ahci }, /* MCP67 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f0), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f1), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f2), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f3), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f4), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f5), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f6), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f7), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f8), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07f9), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07fa), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x07fb), board_ahci }, /* MCP73 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad0), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad1), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad2), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad3), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad4), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad5), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad6), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad7), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad8), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ad9), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ada), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0adb), board_ahci }, /* MCP77 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab4), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab5), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab6), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab7), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab8), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0ab9), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0aba), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abb), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abc), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abd), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abe), board_ahci }, /* MCP79 */
|
|
{ PCI_VDEVICE(NVIDIA, 0x0abf), board_ahci }, /* MCP79 */
|
|
|
|
/* SiS */
|
|
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
|
|
{ PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */
|
|
{ PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */
|
|
|
|
/* Marvell */
|
|
{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */
|
|
|
|
/* Generic, PCI class code for AHCI */
|
|
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
|
|
PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
|
|
static struct pci_driver ahci_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = ahci_pci_tbl,
|
|
.probe = ahci_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ahci_pci_device_suspend,
|
|
.resume = ahci_pci_device_resume,
|
|
#endif
|
|
};
|
|
|
|
|
|
static inline int ahci_nr_ports(u32 cap)
|
|
{
|
|
return (cap & 0x1f) + 1;
|
|
}
|
|
|
|
static inline void __iomem *__ahci_port_base(struct ata_host *host,
|
|
unsigned int port_no)
|
|
{
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
|
|
return mmio + 0x100 + (port_no * 0x80);
|
|
}
|
|
|
|
static inline void __iomem *ahci_port_base(struct ata_port *ap)
|
|
{
|
|
return __ahci_port_base(ap->host, ap->port_no);
|
|
}
|
|
|
|
static void ahci_enable_ahci(void __iomem *mmio)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* turn on AHCI_EN */
|
|
tmp = readl(mmio + HOST_CTL);
|
|
if (!(tmp & HOST_AHCI_EN)) {
|
|
tmp |= HOST_AHCI_EN;
|
|
writel(tmp, mmio + HOST_CTL);
|
|
tmp = readl(mmio + HOST_CTL); /* flush && sanity check */
|
|
WARN_ON(!(tmp & HOST_AHCI_EN));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ahci_save_initial_config - Save and fixup initial config values
|
|
* @pdev: target PCI device
|
|
* @hpriv: host private area to store config values
|
|
*
|
|
* Some registers containing configuration info might be setup by
|
|
* BIOS and might be cleared on reset. This function saves the
|
|
* initial values of those registers into @hpriv such that they
|
|
* can be restored after controller reset.
|
|
*
|
|
* If inconsistent, config values are fixed up by this function.
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ahci_save_initial_config(struct pci_dev *pdev,
|
|
struct ahci_host_priv *hpriv)
|
|
{
|
|
void __iomem *mmio = pcim_iomap_table(pdev)[AHCI_PCI_BAR];
|
|
u32 cap, port_map;
|
|
int i;
|
|
|
|
/* make sure AHCI mode is enabled before accessing CAP */
|
|
ahci_enable_ahci(mmio);
|
|
|
|
/* Values prefixed with saved_ are written back to host after
|
|
* reset. Values without are used for driver operation.
|
|
*/
|
|
hpriv->saved_cap = cap = readl(mmio + HOST_CAP);
|
|
hpriv->saved_port_map = port_map = readl(mmio + HOST_PORTS_IMPL);
|
|
|
|
/* some chips have errata preventing 64bit use */
|
|
if ((cap & HOST_CAP_64) && (hpriv->flags & AHCI_HFLAG_32BIT_ONLY)) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"controller can't do 64bit DMA, forcing 32bit\n");
|
|
cap &= ~HOST_CAP_64;
|
|
}
|
|
|
|
if ((cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_NO_NCQ)) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"controller can't do NCQ, turning off CAP_NCQ\n");
|
|
cap &= ~HOST_CAP_NCQ;
|
|
}
|
|
|
|
if ((cap && HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"controller can't do PMP, turning off CAP_PMP\n");
|
|
cap &= ~HOST_CAP_PMP;
|
|
}
|
|
|
|
/*
|
|
* Temporary Marvell 6145 hack: PATA port presence
|
|
* is asserted through the standard AHCI port
|
|
* presence register, as bit 4 (counting from 0)
|
|
*/
|
|
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"MV_AHCI HACK: port_map %x -> %x\n",
|
|
hpriv->port_map,
|
|
hpriv->port_map & 0xf);
|
|
|
|
port_map &= 0xf;
|
|
}
|
|
|
|
/* cross check port_map and cap.n_ports */
|
|
if (port_map) {
|
|
int map_ports = 0;
|
|
|
|
for (i = 0; i < AHCI_MAX_PORTS; i++)
|
|
if (port_map & (1 << i))
|
|
map_ports++;
|
|
|
|
/* If PI has more ports than n_ports, whine, clear
|
|
* port_map and let it be generated from n_ports.
|
|
*/
|
|
if (map_ports > ahci_nr_ports(cap)) {
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"implemented port map (0x%x) contains more "
|
|
"ports than nr_ports (%u), using nr_ports\n",
|
|
port_map, ahci_nr_ports(cap));
|
|
port_map = 0;
|
|
}
|
|
}
|
|
|
|
/* fabricate port_map from cap.nr_ports */
|
|
if (!port_map) {
|
|
port_map = (1 << ahci_nr_ports(cap)) - 1;
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"forcing PORTS_IMPL to 0x%x\n", port_map);
|
|
|
|
/* write the fixed up value to the PI register */
|
|
hpriv->saved_port_map = port_map;
|
|
}
|
|
|
|
/* record values to use during operation */
|
|
hpriv->cap = cap;
|
|
hpriv->port_map = port_map;
|
|
}
|
|
|
|
/**
|
|
* ahci_restore_initial_config - Restore initial config
|
|
* @host: target ATA host
|
|
*
|
|
* Restore initial config stored by ahci_save_initial_config().
|
|
*
|
|
* LOCKING:
|
|
* None.
|
|
*/
|
|
static void ahci_restore_initial_config(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
|
|
writel(hpriv->saved_cap, mmio + HOST_CAP);
|
|
writel(hpriv->saved_port_map, mmio + HOST_PORTS_IMPL);
|
|
(void) readl(mmio + HOST_PORTS_IMPL); /* flush */
|
|
}
|
|
|
|
static unsigned ahci_scr_offset(struct ata_port *ap, unsigned int sc_reg)
|
|
{
|
|
static const int offset[] = {
|
|
[SCR_STATUS] = PORT_SCR_STAT,
|
|
[SCR_CONTROL] = PORT_SCR_CTL,
|
|
[SCR_ERROR] = PORT_SCR_ERR,
|
|
[SCR_ACTIVE] = PORT_SCR_ACT,
|
|
[SCR_NOTIFICATION] = PORT_SCR_NTF,
|
|
};
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
|
|
if (sc_reg < ARRAY_SIZE(offset) &&
|
|
(sc_reg != SCR_NOTIFICATION || (hpriv->cap & HOST_CAP_SNTF)))
|
|
return offset[sc_reg];
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
int offset = ahci_scr_offset(ap, sc_reg);
|
|
|
|
if (offset) {
|
|
*val = readl(port_mmio + offset);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ahci_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
int offset = ahci_scr_offset(ap, sc_reg);
|
|
|
|
if (offset) {
|
|
writel(val, port_mmio + offset);
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void ahci_start_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
/* start DMA */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_START;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* flush */
|
|
}
|
|
|
|
static int ahci_stop_engine(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
|
|
/* check if the HBA is idle */
|
|
if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
|
|
return 0;
|
|
|
|
/* setting HBA to idle */
|
|
tmp &= ~PORT_CMD_START;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* wait for engine to stop. This could be as long as 500 msec */
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD,
|
|
PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
|
|
if (tmp & PORT_CMD_LIST_ON)
|
|
return -EIO;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_start_fis_rx(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 tmp;
|
|
|
|
/* set FIS registers */
|
|
if (hpriv->cap & HOST_CAP_64)
|
|
writel((pp->cmd_slot_dma >> 16) >> 16,
|
|
port_mmio + PORT_LST_ADDR_HI);
|
|
writel(pp->cmd_slot_dma & 0xffffffff, port_mmio + PORT_LST_ADDR);
|
|
|
|
if (hpriv->cap & HOST_CAP_64)
|
|
writel((pp->rx_fis_dma >> 16) >> 16,
|
|
port_mmio + PORT_FIS_ADDR_HI);
|
|
writel(pp->rx_fis_dma & 0xffffffff, port_mmio + PORT_FIS_ADDR);
|
|
|
|
/* enable FIS reception */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_FIS_RX;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* flush */
|
|
readl(port_mmio + PORT_CMD);
|
|
}
|
|
|
|
static int ahci_stop_fis_rx(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
|
|
/* disable FIS reception */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp &= ~PORT_CMD_FIS_RX;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
/* wait for completion, spec says 500ms, give it 1000 */
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD, PORT_CMD_FIS_ON,
|
|
PORT_CMD_FIS_ON, 10, 1000);
|
|
if (tmp & PORT_CMD_FIS_ON)
|
|
return -EBUSY;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_power_up(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
|
|
/* spin up device */
|
|
if (hpriv->cap & HOST_CAP_SSS) {
|
|
cmd |= PORT_CMD_SPIN_UP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
}
|
|
|
|
/* wake up link */
|
|
writel(cmd | PORT_CMD_ICC_ACTIVE, port_mmio + PORT_CMD);
|
|
}
|
|
|
|
static void ahci_disable_alpm(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* IPM bits should be disabled by libata-core */
|
|
/* get the existing command bits */
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/* disable ALPM and ASP */
|
|
cmd &= ~PORT_CMD_ASP;
|
|
cmd &= ~PORT_CMD_ALPE;
|
|
|
|
/* force the interface back to active */
|
|
cmd |= PORT_CMD_ICC_ACTIVE;
|
|
|
|
/* write out new cmd value */
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/* wait 10ms to be sure we've come out of any low power state */
|
|
msleep(10);
|
|
|
|
/* clear out any PhyRdy stuff from interrupt status */
|
|
writel(PORT_IRQ_PHYRDY, port_mmio + PORT_IRQ_STAT);
|
|
|
|
/* go ahead and clean out PhyRdy Change from Serror too */
|
|
ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
|
|
|
|
/*
|
|
* Clear flag to indicate that we should ignore all PhyRdy
|
|
* state changes
|
|
*/
|
|
hpriv->flags &= ~AHCI_HFLAG_NO_HOTPLUG;
|
|
|
|
/*
|
|
* Enable interrupts on Phy Ready.
|
|
*/
|
|
pp->intr_mask |= PORT_IRQ_PHYRDY;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
|
|
/*
|
|
* don't change the link pm policy - we can be called
|
|
* just to turn of link pm temporarily
|
|
*/
|
|
}
|
|
|
|
static int ahci_enable_alpm(struct ata_port *ap,
|
|
enum link_pm policy)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 asp;
|
|
|
|
/* Make sure the host is capable of link power management */
|
|
if (!(hpriv->cap & HOST_CAP_ALPM))
|
|
return -EINVAL;
|
|
|
|
switch (policy) {
|
|
case MAX_PERFORMANCE:
|
|
case NOT_AVAILABLE:
|
|
/*
|
|
* if we came here with NOT_AVAILABLE,
|
|
* it just means this is the first time we
|
|
* have tried to enable - default to max performance,
|
|
* and let the user go to lower power modes on request.
|
|
*/
|
|
ahci_disable_alpm(ap);
|
|
return 0;
|
|
case MIN_POWER:
|
|
/* configure HBA to enter SLUMBER */
|
|
asp = PORT_CMD_ASP;
|
|
break;
|
|
case MEDIUM_POWER:
|
|
/* configure HBA to enter PARTIAL */
|
|
asp = 0;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Disable interrupts on Phy Ready. This keeps us from
|
|
* getting woken up due to spurious phy ready interrupts
|
|
* TBD - Hot plug should be done via polling now, is
|
|
* that even supported?
|
|
*/
|
|
pp->intr_mask &= ~PORT_IRQ_PHYRDY;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
|
|
/*
|
|
* Set a flag to indicate that we should ignore all PhyRdy
|
|
* state changes since these can happen now whenever we
|
|
* change link state
|
|
*/
|
|
hpriv->flags |= AHCI_HFLAG_NO_HOTPLUG;
|
|
|
|
/* get the existing command bits */
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/*
|
|
* Set ASP based on Policy
|
|
*/
|
|
cmd |= asp;
|
|
|
|
/*
|
|
* Setting this bit will instruct the HBA to aggressively
|
|
* enter a lower power link state when it's appropriate and
|
|
* based on the value set above for ASP
|
|
*/
|
|
cmd |= PORT_CMD_ALPE;
|
|
|
|
/* write out new cmd value */
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
|
|
/* IPM bits should be set by libata-core */
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void ahci_power_down(struct ata_port *ap)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 cmd, scontrol;
|
|
|
|
if (!(hpriv->cap & HOST_CAP_SSS))
|
|
return;
|
|
|
|
/* put device into listen mode, first set PxSCTL.DET to 0 */
|
|
scontrol = readl(port_mmio + PORT_SCR_CTL);
|
|
scontrol &= ~0xf;
|
|
writel(scontrol, port_mmio + PORT_SCR_CTL);
|
|
|
|
/* then set PxCMD.SUD to 0 */
|
|
cmd = readl(port_mmio + PORT_CMD) & ~PORT_CMD_ICC_MASK;
|
|
cmd &= ~PORT_CMD_SPIN_UP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
}
|
|
#endif
|
|
|
|
static void ahci_start_port(struct ata_port *ap)
|
|
{
|
|
/* enable FIS reception */
|
|
ahci_start_fis_rx(ap);
|
|
|
|
/* enable DMA */
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
static int ahci_deinit_port(struct ata_port *ap, const char **emsg)
|
|
{
|
|
int rc;
|
|
|
|
/* disable DMA */
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc) {
|
|
*emsg = "failed to stop engine";
|
|
return rc;
|
|
}
|
|
|
|
/* disable FIS reception */
|
|
rc = ahci_stop_fis_rx(ap);
|
|
if (rc) {
|
|
*emsg = "failed stop FIS RX";
|
|
return rc;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_reset_controller(struct ata_host *host)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
u32 tmp;
|
|
|
|
/* we must be in AHCI mode, before using anything
|
|
* AHCI-specific, such as HOST_RESET.
|
|
*/
|
|
ahci_enable_ahci(mmio);
|
|
|
|
/* global controller reset */
|
|
tmp = readl(mmio + HOST_CTL);
|
|
if ((tmp & HOST_RESET) == 0) {
|
|
writel(tmp | HOST_RESET, mmio + HOST_CTL);
|
|
readl(mmio + HOST_CTL); /* flush */
|
|
}
|
|
|
|
/* reset must complete within 1 second, or
|
|
* the hardware should be considered fried.
|
|
*/
|
|
ssleep(1);
|
|
|
|
tmp = readl(mmio + HOST_CTL);
|
|
if (tmp & HOST_RESET) {
|
|
dev_printk(KERN_ERR, host->dev,
|
|
"controller reset failed (0x%x)\n", tmp);
|
|
return -EIO;
|
|
}
|
|
|
|
/* turn on AHCI mode */
|
|
ahci_enable_ahci(mmio);
|
|
|
|
/* some registers might be cleared on reset. restore initial values */
|
|
ahci_restore_initial_config(host);
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
|
|
u16 tmp16;
|
|
|
|
/* configure PCS */
|
|
pci_read_config_word(pdev, 0x92, &tmp16);
|
|
if ((tmp16 & hpriv->port_map) != hpriv->port_map) {
|
|
tmp16 |= hpriv->port_map;
|
|
pci_write_config_word(pdev, 0x92, tmp16);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_port_init(struct pci_dev *pdev, struct ata_port *ap,
|
|
int port_no, void __iomem *mmio,
|
|
void __iomem *port_mmio)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
u32 tmp;
|
|
|
|
/* make sure port is not active */
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc)
|
|
dev_printk(KERN_WARNING, &pdev->dev,
|
|
"%s (%d)\n", emsg, rc);
|
|
|
|
/* clear SError */
|
|
tmp = readl(port_mmio + PORT_SCR_ERR);
|
|
VPRINTK("PORT_SCR_ERR 0x%x\n", tmp);
|
|
writel(tmp, port_mmio + PORT_SCR_ERR);
|
|
|
|
/* clear port IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
if (tmp)
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
|
|
writel(1 << port_no, mmio + HOST_IRQ_STAT);
|
|
}
|
|
|
|
static void ahci_init_controller(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
int i;
|
|
void __iomem *port_mmio;
|
|
u32 tmp;
|
|
|
|
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
|
|
port_mmio = __ahci_port_base(host, 4);
|
|
|
|
writel(0, port_mmio + PORT_IRQ_MASK);
|
|
|
|
/* clear port IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
VPRINTK("PORT_IRQ_STAT 0x%x\n", tmp);
|
|
if (tmp)
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
}
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
port_mmio = ahci_port_base(ap);
|
|
if (ata_port_is_dummy(ap))
|
|
continue;
|
|
|
|
ahci_port_init(pdev, ap, i, mmio, port_mmio);
|
|
}
|
|
|
|
tmp = readl(mmio + HOST_CTL);
|
|
VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
writel(tmp | HOST_IRQ_EN, mmio + HOST_CTL);
|
|
tmp = readl(mmio + HOST_CTL);
|
|
VPRINTK("HOST_CTL 0x%x\n", tmp);
|
|
}
|
|
|
|
static unsigned int ahci_dev_classify(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ata_taskfile tf;
|
|
u32 tmp;
|
|
|
|
tmp = readl(port_mmio + PORT_SIG);
|
|
tf.lbah = (tmp >> 24) & 0xff;
|
|
tf.lbam = (tmp >> 16) & 0xff;
|
|
tf.lbal = (tmp >> 8) & 0xff;
|
|
tf.nsect = (tmp) & 0xff;
|
|
|
|
return ata_dev_classify(&tf);
|
|
}
|
|
|
|
static void ahci_fill_cmd_slot(struct ahci_port_priv *pp, unsigned int tag,
|
|
u32 opts)
|
|
{
|
|
dma_addr_t cmd_tbl_dma;
|
|
|
|
cmd_tbl_dma = pp->cmd_tbl_dma + tag * AHCI_CMD_TBL_SZ;
|
|
|
|
pp->cmd_slot[tag].opts = cpu_to_le32(opts);
|
|
pp->cmd_slot[tag].status = 0;
|
|
pp->cmd_slot[tag].tbl_addr = cpu_to_le32(cmd_tbl_dma & 0xffffffff);
|
|
pp->cmd_slot[tag].tbl_addr_hi = cpu_to_le32((cmd_tbl_dma >> 16) >> 16);
|
|
}
|
|
|
|
static int ahci_kick_engine(struct ata_port *ap, int force_restart)
|
|
{
|
|
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
u32 tmp;
|
|
int busy, rc;
|
|
|
|
/* do we need to kick the port? */
|
|
busy = ahci_check_status(ap) & (ATA_BUSY | ATA_DRQ);
|
|
if (!busy && !force_restart)
|
|
return 0;
|
|
|
|
/* stop engine */
|
|
rc = ahci_stop_engine(ap);
|
|
if (rc)
|
|
goto out_restart;
|
|
|
|
/* need to do CLO? */
|
|
if (!busy) {
|
|
rc = 0;
|
|
goto out_restart;
|
|
}
|
|
|
|
if (!(hpriv->cap & HOST_CAP_CLO)) {
|
|
rc = -EOPNOTSUPP;
|
|
goto out_restart;
|
|
}
|
|
|
|
/* perform CLO */
|
|
tmp = readl(port_mmio + PORT_CMD);
|
|
tmp |= PORT_CMD_CLO;
|
|
writel(tmp, port_mmio + PORT_CMD);
|
|
|
|
rc = 0;
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD,
|
|
PORT_CMD_CLO, PORT_CMD_CLO, 1, 500);
|
|
if (tmp & PORT_CMD_CLO)
|
|
rc = -EIO;
|
|
|
|
/* restart engine */
|
|
out_restart:
|
|
ahci_start_engine(ap);
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp,
|
|
struct ata_taskfile *tf, int is_cmd, u16 flags,
|
|
unsigned long timeout_msec)
|
|
{
|
|
const u32 cmd_fis_len = 5; /* five dwords */
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u8 *fis = pp->cmd_tbl;
|
|
u32 tmp;
|
|
|
|
/* prep the command */
|
|
ata_tf_to_fis(tf, pmp, is_cmd, fis);
|
|
ahci_fill_cmd_slot(pp, 0, cmd_fis_len | flags | (pmp << 12));
|
|
|
|
/* issue & wait */
|
|
writel(1, port_mmio + PORT_CMD_ISSUE);
|
|
|
|
if (timeout_msec) {
|
|
tmp = ata_wait_register(port_mmio + PORT_CMD_ISSUE, 0x1, 0x1,
|
|
1, timeout_msec);
|
|
if (tmp & 0x1) {
|
|
ahci_kick_engine(ap, 1);
|
|
return -EBUSY;
|
|
}
|
|
} else
|
|
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
|
|
int pmp, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
const char *reason = NULL;
|
|
unsigned long now, msecs;
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
if (ata_link_offline(link)) {
|
|
DPRINTK("PHY reports no device\n");
|
|
*class = ATA_DEV_NONE;
|
|
return 0;
|
|
}
|
|
|
|
/* prepare for SRST (AHCI-1.1 10.4.1) */
|
|
rc = ahci_kick_engine(ap, 1);
|
|
if (rc && rc != -EOPNOTSUPP)
|
|
ata_link_printk(link, KERN_WARNING,
|
|
"failed to reset engine (errno=%d)\n", rc);
|
|
|
|
ata_tf_init(link->device, &tf);
|
|
|
|
/* issue the first D2H Register FIS */
|
|
msecs = 0;
|
|
now = jiffies;
|
|
if (time_after(now, deadline))
|
|
msecs = jiffies_to_msecs(deadline - now);
|
|
|
|
tf.ctl |= ATA_SRST;
|
|
if (ahci_exec_polled_cmd(ap, pmp, &tf, 0,
|
|
AHCI_CMD_RESET | AHCI_CMD_CLR_BUSY, msecs)) {
|
|
rc = -EIO;
|
|
reason = "1st FIS failed";
|
|
goto fail;
|
|
}
|
|
|
|
/* spec says at least 5us, but be generous and sleep for 1ms */
|
|
msleep(1);
|
|
|
|
/* issue the second D2H Register FIS */
|
|
tf.ctl &= ~ATA_SRST;
|
|
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
|
|
|
|
/* wait a while before checking status */
|
|
ata_wait_after_reset(ap, deadline);
|
|
|
|
rc = ata_wait_ready(ap, deadline);
|
|
/* link occupied, -ENODEV too is an error */
|
|
if (rc) {
|
|
reason = "device not ready";
|
|
goto fail;
|
|
}
|
|
*class = ahci_dev_classify(ap);
|
|
|
|
DPRINTK("EXIT, class=%u\n", *class);
|
|
return 0;
|
|
|
|
fail:
|
|
ata_link_printk(link, KERN_ERR, "softreset failed (%s)\n", reason);
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
int pmp = 0;
|
|
|
|
if (link->ap->flags & ATA_FLAG_PMP)
|
|
pmp = SATA_PMP_CTRL_PORT;
|
|
|
|
return ahci_do_softreset(link, class, pmp, deadline);
|
|
}
|
|
|
|
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
/* clear D2H reception area to properly wait for D2H FIS */
|
|
ata_tf_init(link->device, &tf);
|
|
tf.command = 0x80;
|
|
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
|
|
rc = sata_std_hardreset(link, class, deadline);
|
|
|
|
ahci_start_engine(ap);
|
|
|
|
if (rc == 0 && ata_link_online(link))
|
|
*class = ahci_dev_classify(ap);
|
|
if (rc != -EAGAIN && *class == ATA_DEV_UNKNOWN)
|
|
*class = ATA_DEV_NONE;
|
|
|
|
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
u32 serror;
|
|
int rc;
|
|
|
|
DPRINTK("ENTER\n");
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
|
|
deadline);
|
|
|
|
/* vt8251 needs SError cleared for the port to operate */
|
|
ahci_scr_read(ap, SCR_ERROR, &serror);
|
|
ahci_scr_write(ap, SCR_ERROR, serror);
|
|
|
|
ahci_start_engine(ap);
|
|
|
|
DPRINTK("EXIT, rc=%d, class=%u\n", rc, *class);
|
|
|
|
/* vt8251 doesn't clear BSY on signature FIS reception,
|
|
* request follow-up softreset.
|
|
*/
|
|
return rc ?: -EAGAIN;
|
|
}
|
|
|
|
static int ahci_p5wdh_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
struct ata_taskfile tf;
|
|
int rc;
|
|
|
|
ahci_stop_engine(ap);
|
|
|
|
/* clear D2H reception area to properly wait for D2H FIS */
|
|
ata_tf_init(link->device, &tf);
|
|
tf.command = 0x80;
|
|
ata_tf_to_fis(&tf, 0, 0, d2h_fis);
|
|
|
|
rc = sata_link_hardreset(link, sata_ehc_deb_timing(&link->eh_context),
|
|
deadline);
|
|
|
|
ahci_start_engine(ap);
|
|
|
|
if (rc || ata_link_offline(link))
|
|
return rc;
|
|
|
|
/* spec mandates ">= 2ms" before checking status */
|
|
msleep(150);
|
|
|
|
/* The pseudo configuration device on SIMG4726 attached to
|
|
* ASUS P5W-DH Deluxe doesn't send signature FIS after
|
|
* hardreset if no device is attached to the first downstream
|
|
* port && the pseudo device locks up on SRST w/ PMP==0. To
|
|
* work around this, wait for !BSY only briefly. If BSY isn't
|
|
* cleared, perform CLO and proceed to IDENTIFY (achieved by
|
|
* ATA_LFLAG_NO_SRST and ATA_LFLAG_ASSUME_ATA).
|
|
*
|
|
* Wait for two seconds. Devices attached to downstream port
|
|
* which can't process the following IDENTIFY after this will
|
|
* have to be reset again. For most cases, this should
|
|
* suffice while making probing snappish enough.
|
|
*/
|
|
rc = ata_wait_ready(ap, jiffies + 2 * HZ);
|
|
if (rc)
|
|
ahci_kick_engine(ap, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_postreset(struct ata_link *link, unsigned int *class)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 new_tmp, tmp;
|
|
|
|
ata_std_postreset(link, class);
|
|
|
|
/* Make sure port's ATAPI bit is set appropriately */
|
|
new_tmp = tmp = readl(port_mmio + PORT_CMD);
|
|
if (*class == ATA_DEV_ATAPI)
|
|
new_tmp |= PORT_CMD_ATAPI;
|
|
else
|
|
new_tmp &= ~PORT_CMD_ATAPI;
|
|
if (new_tmp != tmp) {
|
|
writel(new_tmp, port_mmio + PORT_CMD);
|
|
readl(port_mmio + PORT_CMD); /* flush */
|
|
}
|
|
}
|
|
|
|
static int ahci_pmp_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
return ahci_do_softreset(link, class, link->pmp, deadline);
|
|
}
|
|
|
|
static u8 ahci_check_status(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr;
|
|
|
|
return readl(mmio + PORT_TFDATA) & 0xFF;
|
|
}
|
|
|
|
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
|
|
{
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG;
|
|
|
|
ata_tf_from_fis(d2h_fis, tf);
|
|
}
|
|
|
|
static unsigned int ahci_fill_sg(struct ata_queued_cmd *qc, void *cmd_tbl)
|
|
{
|
|
struct scatterlist *sg;
|
|
struct ahci_sg *ahci_sg = cmd_tbl + AHCI_CMD_TBL_HDR_SZ;
|
|
unsigned int si;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
/*
|
|
* Next, the S/G list.
|
|
*/
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
dma_addr_t addr = sg_dma_address(sg);
|
|
u32 sg_len = sg_dma_len(sg);
|
|
|
|
ahci_sg[si].addr = cpu_to_le32(addr & 0xffffffff);
|
|
ahci_sg[si].addr_hi = cpu_to_le32((addr >> 16) >> 16);
|
|
ahci_sg[si].flags_size = cpu_to_le32(sg_len - 1);
|
|
}
|
|
|
|
return si;
|
|
}
|
|
|
|
static void ahci_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
int is_atapi = ata_is_atapi(qc->tf.protocol);
|
|
void *cmd_tbl;
|
|
u32 opts;
|
|
const u32 cmd_fis_len = 5; /* five dwords */
|
|
unsigned int n_elem;
|
|
|
|
/*
|
|
* Fill in command table information. First, the header,
|
|
* a SATA Register - Host to Device command FIS.
|
|
*/
|
|
cmd_tbl = pp->cmd_tbl + qc->tag * AHCI_CMD_TBL_SZ;
|
|
|
|
ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, cmd_tbl);
|
|
if (is_atapi) {
|
|
memset(cmd_tbl + AHCI_CMD_TBL_CDB, 0, 32);
|
|
memcpy(cmd_tbl + AHCI_CMD_TBL_CDB, qc->cdb, qc->dev->cdb_len);
|
|
}
|
|
|
|
n_elem = 0;
|
|
if (qc->flags & ATA_QCFLAG_DMAMAP)
|
|
n_elem = ahci_fill_sg(qc, cmd_tbl);
|
|
|
|
/*
|
|
* Fill in command slot information.
|
|
*/
|
|
opts = cmd_fis_len | n_elem << 16 | (qc->dev->link->pmp << 12);
|
|
if (qc->tf.flags & ATA_TFLAG_WRITE)
|
|
opts |= AHCI_CMD_WRITE;
|
|
if (is_atapi)
|
|
opts |= AHCI_CMD_ATAPI | AHCI_CMD_PREFETCH;
|
|
|
|
ahci_fill_cmd_slot(pp, qc->tag, opts);
|
|
}
|
|
|
|
static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
|
|
{
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ata_eh_info *host_ehi = &ap->link.eh_info;
|
|
struct ata_link *link = NULL;
|
|
struct ata_queued_cmd *active_qc;
|
|
struct ata_eh_info *active_ehi;
|
|
u32 serror;
|
|
|
|
/* determine active link */
|
|
ata_port_for_each_link(link, ap)
|
|
if (ata_link_active(link))
|
|
break;
|
|
if (!link)
|
|
link = &ap->link;
|
|
|
|
active_qc = ata_qc_from_tag(ap, link->active_tag);
|
|
active_ehi = &link->eh_info;
|
|
|
|
/* record irq stat */
|
|
ata_ehi_clear_desc(host_ehi);
|
|
ata_ehi_push_desc(host_ehi, "irq_stat 0x%08x", irq_stat);
|
|
|
|
/* AHCI needs SError cleared; otherwise, it might lock up */
|
|
ahci_scr_read(ap, SCR_ERROR, &serror);
|
|
ahci_scr_write(ap, SCR_ERROR, serror);
|
|
host_ehi->serror |= serror;
|
|
|
|
/* some controllers set IRQ_IF_ERR on device errors, ignore it */
|
|
if (hpriv->flags & AHCI_HFLAG_IGN_IRQ_IF_ERR)
|
|
irq_stat &= ~PORT_IRQ_IF_ERR;
|
|
|
|
if (irq_stat & PORT_IRQ_TF_ERR) {
|
|
/* If qc is active, charge it; otherwise, the active
|
|
* link. There's no active qc on NCQ errors. It will
|
|
* be determined by EH by reading log page 10h.
|
|
*/
|
|
if (active_qc)
|
|
active_qc->err_mask |= AC_ERR_DEV;
|
|
else
|
|
active_ehi->err_mask |= AC_ERR_DEV;
|
|
|
|
if (hpriv->flags & AHCI_HFLAG_IGN_SERR_INTERNAL)
|
|
host_ehi->serror &= ~SERR_INTERNAL;
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_UNK_FIS) {
|
|
u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
|
|
|
|
active_ehi->err_mask |= AC_ERR_HSM;
|
|
active_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(active_ehi,
|
|
"unknown FIS %08x %08x %08x %08x" ,
|
|
unk[0], unk[1], unk[2], unk[3]);
|
|
}
|
|
|
|
if (ap->nr_pmp_links && (irq_stat & PORT_IRQ_BAD_PMP)) {
|
|
active_ehi->err_mask |= AC_ERR_HSM;
|
|
active_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(active_ehi, "incorrect PMP");
|
|
}
|
|
|
|
if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
|
|
host_ehi->err_mask |= AC_ERR_HOST_BUS;
|
|
host_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(host_ehi, "host bus error");
|
|
}
|
|
|
|
if (irq_stat & PORT_IRQ_IF_ERR) {
|
|
host_ehi->err_mask |= AC_ERR_ATA_BUS;
|
|
host_ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_ehi_push_desc(host_ehi, "interface fatal error");
|
|
}
|
|
|
|
if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
|
|
ata_ehi_hotplugged(host_ehi);
|
|
ata_ehi_push_desc(host_ehi, "%s",
|
|
irq_stat & PORT_IRQ_CONNECT ?
|
|
"connection status changed" : "PHY RDY changed");
|
|
}
|
|
|
|
/* okay, let's hand over to EH */
|
|
|
|
if (irq_stat & PORT_IRQ_FREEZE)
|
|
ata_port_freeze(ap);
|
|
else
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static void ahci_port_intr(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ap->ioaddr.cmd_addr;
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
struct ahci_host_priv *hpriv = ap->host->private_data;
|
|
int resetting = !!(ap->pflags & ATA_PFLAG_RESETTING);
|
|
u32 status, qc_active;
|
|
int rc;
|
|
|
|
status = readl(port_mmio + PORT_IRQ_STAT);
|
|
writel(status, port_mmio + PORT_IRQ_STAT);
|
|
|
|
/* ignore BAD_PMP while resetting */
|
|
if (unlikely(resetting))
|
|
status &= ~PORT_IRQ_BAD_PMP;
|
|
|
|
/* If we are getting PhyRdy, this is
|
|
* just a power state change, we should
|
|
* clear out this, plus the PhyRdy/Comm
|
|
* Wake bits from Serror
|
|
*/
|
|
if ((hpriv->flags & AHCI_HFLAG_NO_HOTPLUG) &&
|
|
(status & PORT_IRQ_PHYRDY)) {
|
|
status &= ~PORT_IRQ_PHYRDY;
|
|
ahci_scr_write(ap, SCR_ERROR, ((1 << 16) | (1 << 18)));
|
|
}
|
|
|
|
if (unlikely(status & PORT_IRQ_ERROR)) {
|
|
ahci_error_intr(ap, status);
|
|
return;
|
|
}
|
|
|
|
if (status & PORT_IRQ_SDB_FIS) {
|
|
/* If SNotification is available, leave notification
|
|
* handling to sata_async_notification(). If not,
|
|
* emulate it by snooping SDB FIS RX area.
|
|
*
|
|
* Snooping FIS RX area is probably cheaper than
|
|
* poking SNotification but some constrollers which
|
|
* implement SNotification, ICH9 for example, don't
|
|
* store AN SDB FIS into receive area.
|
|
*/
|
|
if (hpriv->cap & HOST_CAP_SNTF)
|
|
sata_async_notification(ap);
|
|
else {
|
|
/* If the 'N' bit in word 0 of the FIS is set,
|
|
* we just received asynchronous notification.
|
|
* Tell libata about it.
|
|
*/
|
|
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
|
|
u32 f0 = le32_to_cpu(f[0]);
|
|
|
|
if (f0 & (1 << 15))
|
|
sata_async_notification(ap);
|
|
}
|
|
}
|
|
|
|
/* pp->active_link is valid iff any command is in flight */
|
|
if (ap->qc_active && pp->active_link->sactive)
|
|
qc_active = readl(port_mmio + PORT_SCR_ACT);
|
|
else
|
|
qc_active = readl(port_mmio + PORT_CMD_ISSUE);
|
|
|
|
rc = ata_qc_complete_multiple(ap, qc_active, NULL);
|
|
|
|
/* while resetting, invalid completions are expected */
|
|
if (unlikely(rc < 0 && !resetting)) {
|
|
ehi->err_mask |= AC_ERR_HSM;
|
|
ehi->action |= ATA_EH_SOFTRESET;
|
|
ata_port_freeze(ap);
|
|
}
|
|
}
|
|
|
|
static void ahci_irq_clear(struct ata_port *ap)
|
|
{
|
|
/* TODO */
|
|
}
|
|
|
|
static irqreturn_t ahci_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct ahci_host_priv *hpriv;
|
|
unsigned int i, handled = 0;
|
|
void __iomem *mmio;
|
|
u32 irq_stat, irq_ack = 0;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
hpriv = host->private_data;
|
|
mmio = host->iomap[AHCI_PCI_BAR];
|
|
|
|
/* sigh. 0xffffffff is a valid return from h/w */
|
|
irq_stat = readl(mmio + HOST_IRQ_STAT);
|
|
irq_stat &= hpriv->port_map;
|
|
if (!irq_stat)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap;
|
|
|
|
if (!(irq_stat & (1 << i)))
|
|
continue;
|
|
|
|
ap = host->ports[i];
|
|
if (ap) {
|
|
ahci_port_intr(ap);
|
|
VPRINTK("port %u\n", i);
|
|
} else {
|
|
VPRINTK("port %u (no irq)\n", i);
|
|
if (ata_ratelimit())
|
|
dev_printk(KERN_WARNING, host->dev,
|
|
"interrupt on disabled port %u\n", i);
|
|
}
|
|
|
|
irq_ack |= (1 << i);
|
|
}
|
|
|
|
if (irq_ack) {
|
|
writel(irq_ack, mmio + HOST_IRQ_STAT);
|
|
handled = 1;
|
|
}
|
|
|
|
spin_unlock(&host->lock);
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* Keep track of the currently active link. It will be used
|
|
* in completion path to determine whether NCQ phase is in
|
|
* progress.
|
|
*/
|
|
pp->active_link = qc->dev->link;
|
|
|
|
if (qc->tf.protocol == ATA_PROT_NCQ)
|
|
writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
|
|
writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
|
|
readl(port_mmio + PORT_CMD_ISSUE); /* flush */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
|
|
/* turn IRQ off */
|
|
writel(0, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *mmio = ap->host->iomap[AHCI_PCI_BAR];
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
u32 tmp;
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
|
|
/* clear IRQ */
|
|
tmp = readl(port_mmio + PORT_IRQ_STAT);
|
|
writel(tmp, port_mmio + PORT_IRQ_STAT);
|
|
writel(1 << ap->port_no, mmio + HOST_IRQ_STAT);
|
|
|
|
/* turn IRQ back on */
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
/* restart engine */
|
|
ahci_stop_engine(ap);
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
/* perform recovery */
|
|
sata_pmp_do_eh(ap, ata_std_prereset, ahci_softreset,
|
|
ahci_hardreset, ahci_postreset,
|
|
sata_pmp_std_prereset, ahci_pmp_softreset,
|
|
sata_pmp_std_hardreset, sata_pmp_std_postreset);
|
|
}
|
|
|
|
static void ahci_vt8251_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
/* restart engine */
|
|
ahci_stop_engine(ap);
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_vt8251_hardreset,
|
|
ahci_postreset);
|
|
}
|
|
|
|
static void ahci_p5wdh_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN)) {
|
|
/* restart engine */
|
|
ahci_stop_engine(ap);
|
|
ahci_start_engine(ap);
|
|
}
|
|
|
|
/* perform recovery */
|
|
ata_do_eh(ap, ata_std_prereset, ahci_softreset, ahci_p5wdh_hardreset,
|
|
ahci_postreset);
|
|
}
|
|
|
|
static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
ahci_kick_engine(ap, 1);
|
|
}
|
|
|
|
static void ahci_pmp_attach(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
cmd |= PORT_CMD_PMP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
|
|
pp->intr_mask |= PORT_IRQ_BAD_PMP;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static void ahci_pmp_detach(struct ata_port *ap)
|
|
{
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
struct ahci_port_priv *pp = ap->private_data;
|
|
u32 cmd;
|
|
|
|
cmd = readl(port_mmio + PORT_CMD);
|
|
cmd &= ~PORT_CMD_PMP;
|
|
writel(cmd, port_mmio + PORT_CMD);
|
|
|
|
pp->intr_mask &= ~PORT_IRQ_BAD_PMP;
|
|
writel(pp->intr_mask, port_mmio + PORT_IRQ_MASK);
|
|
}
|
|
|
|
static int ahci_port_resume(struct ata_port *ap)
|
|
{
|
|
ahci_power_up(ap);
|
|
ahci_start_port(ap);
|
|
|
|
if (ap->nr_pmp_links)
|
|
ahci_pmp_attach(ap);
|
|
else
|
|
ahci_pmp_detach(ap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int ahci_port_suspend(struct ata_port *ap, pm_message_t mesg)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc == 0)
|
|
ahci_power_down(ap);
|
|
else {
|
|
ata_port_printk(ap, KERN_ERR, "%s (%d)\n", emsg, rc);
|
|
ahci_start_port(ap);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
u32 ctl;
|
|
|
|
if (mesg.event == PM_EVENT_SUSPEND) {
|
|
/* AHCI spec rev1.1 section 8.3.3:
|
|
* Software must disable interrupts prior to requesting a
|
|
* transition of the HBA to D3 state.
|
|
*/
|
|
ctl = readl(mmio + HOST_CTL);
|
|
ctl &= ~HOST_IRQ_EN;
|
|
writel(ctl, mmio + HOST_CTL);
|
|
readl(mmio + HOST_CTL); /* flush */
|
|
}
|
|
|
|
return ata_pci_device_suspend(pdev, mesg);
|
|
}
|
|
|
|
static int ahci_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->dev.power.power_state.event == PM_EVENT_SUSPEND) {
|
|
rc = ahci_reset_controller(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ahci_init_controller(host);
|
|
}
|
|
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int ahci_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct ahci_port_priv *pp;
|
|
void *mem;
|
|
dma_addr_t mem_dma;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
mem = dmam_alloc_coherent(dev, AHCI_PORT_PRIV_DMA_SZ, &mem_dma,
|
|
GFP_KERNEL);
|
|
if (!mem)
|
|
return -ENOMEM;
|
|
memset(mem, 0, AHCI_PORT_PRIV_DMA_SZ);
|
|
|
|
/*
|
|
* First item in chunk of DMA memory: 32-slot command table,
|
|
* 32 bytes each in size
|
|
*/
|
|
pp->cmd_slot = mem;
|
|
pp->cmd_slot_dma = mem_dma;
|
|
|
|
mem += AHCI_CMD_SLOT_SZ;
|
|
mem_dma += AHCI_CMD_SLOT_SZ;
|
|
|
|
/*
|
|
* Second item: Received-FIS area
|
|
*/
|
|
pp->rx_fis = mem;
|
|
pp->rx_fis_dma = mem_dma;
|
|
|
|
mem += AHCI_RX_FIS_SZ;
|
|
mem_dma += AHCI_RX_FIS_SZ;
|
|
|
|
/*
|
|
* Third item: data area for storing a single command
|
|
* and its scatter-gather table
|
|
*/
|
|
pp->cmd_tbl = mem;
|
|
pp->cmd_tbl_dma = mem_dma;
|
|
|
|
/*
|
|
* Save off initial list of interrupts to be enabled.
|
|
* This could be changed later
|
|
*/
|
|
pp->intr_mask = DEF_PORT_IRQ;
|
|
|
|
ap->private_data = pp;
|
|
|
|
/* engage engines, captain */
|
|
return ahci_port_resume(ap);
|
|
}
|
|
|
|
static void ahci_port_stop(struct ata_port *ap)
|
|
{
|
|
const char *emsg = NULL;
|
|
int rc;
|
|
|
|
/* de-initialize port */
|
|
rc = ahci_deinit_port(ap, &emsg);
|
|
if (rc)
|
|
ata_port_printk(ap, KERN_WARNING, "%s (%d)\n", emsg, rc);
|
|
}
|
|
|
|
static int ahci_configure_dma_masks(struct pci_dev *pdev, int using_dac)
|
|
{
|
|
int rc;
|
|
|
|
if (using_dac &&
|
|
!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
|
|
if (rc) {
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"64-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
} else {
|
|
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if (rc) {
|
|
dev_printk(KERN_ERR, &pdev->dev,
|
|
"32-bit consistent DMA enable failed\n");
|
|
return rc;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void ahci_print_info(struct ata_host *host)
|
|
{
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
|
|
u32 vers, cap, impl, speed;
|
|
const char *speed_s;
|
|
u16 cc;
|
|
const char *scc_s;
|
|
|
|
vers = readl(mmio + HOST_VERSION);
|
|
cap = hpriv->cap;
|
|
impl = hpriv->port_map;
|
|
|
|
speed = (cap >> 20) & 0xf;
|
|
if (speed == 1)
|
|
speed_s = "1.5";
|
|
else if (speed == 2)
|
|
speed_s = "3";
|
|
else
|
|
speed_s = "?";
|
|
|
|
pci_read_config_word(pdev, 0x0a, &cc);
|
|
if (cc == PCI_CLASS_STORAGE_IDE)
|
|
scc_s = "IDE";
|
|
else if (cc == PCI_CLASS_STORAGE_SATA)
|
|
scc_s = "SATA";
|
|
else if (cc == PCI_CLASS_STORAGE_RAID)
|
|
scc_s = "RAID";
|
|
else
|
|
scc_s = "unknown";
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"AHCI %02x%02x.%02x%02x "
|
|
"%u slots %u ports %s Gbps 0x%x impl %s mode\n"
|
|
,
|
|
|
|
(vers >> 24) & 0xff,
|
|
(vers >> 16) & 0xff,
|
|
(vers >> 8) & 0xff,
|
|
vers & 0xff,
|
|
|
|
((cap >> 8) & 0x1f) + 1,
|
|
(cap & 0x1f) + 1,
|
|
speed_s,
|
|
impl,
|
|
scc_s);
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev,
|
|
"flags: "
|
|
"%s%s%s%s%s%s%s"
|
|
"%s%s%s%s%s%s%s\n"
|
|
,
|
|
|
|
cap & (1 << 31) ? "64bit " : "",
|
|
cap & (1 << 30) ? "ncq " : "",
|
|
cap & (1 << 29) ? "sntf " : "",
|
|
cap & (1 << 28) ? "ilck " : "",
|
|
cap & (1 << 27) ? "stag " : "",
|
|
cap & (1 << 26) ? "pm " : "",
|
|
cap & (1 << 25) ? "led " : "",
|
|
|
|
cap & (1 << 24) ? "clo " : "",
|
|
cap & (1 << 19) ? "nz " : "",
|
|
cap & (1 << 18) ? "only " : "",
|
|
cap & (1 << 17) ? "pmp " : "",
|
|
cap & (1 << 15) ? "pio " : "",
|
|
cap & (1 << 14) ? "slum " : "",
|
|
cap & (1 << 13) ? "part " : ""
|
|
);
|
|
}
|
|
|
|
/* On ASUS P5W DH Deluxe, the second port of PCI device 00:1f.2 is
|
|
* hardwired to on-board SIMG 4726. The chipset is ICH8 and doesn't
|
|
* support PMP and the 4726 either directly exports the device
|
|
* attached to the first downstream port or acts as a hardware storage
|
|
* controller and emulate a single ATA device (can be RAID 0/1 or some
|
|
* other configuration).
|
|
*
|
|
* When there's no device attached to the first downstream port of the
|
|
* 4726, "Config Disk" appears, which is a pseudo ATA device to
|
|
* configure the 4726. However, ATA emulation of the device is very
|
|
* lame. It doesn't send signature D2H Reg FIS after the initial
|
|
* hardreset, pukes on SRST w/ PMP==0 and has bunch of other issues.
|
|
*
|
|
* The following function works around the problem by always using
|
|
* hardreset on the port and not depending on receiving signature FIS
|
|
* afterward. If signature FIS isn't received soon, ATA class is
|
|
* assumed without follow-up softreset.
|
|
*/
|
|
static void ahci_p5wdh_workaround(struct ata_host *host)
|
|
{
|
|
static struct dmi_system_id sysids[] = {
|
|
{
|
|
.ident = "P5W DH Deluxe",
|
|
.matches = {
|
|
DMI_MATCH(DMI_SYS_VENDOR,
|
|
"ASUSTEK COMPUTER INC"),
|
|
DMI_MATCH(DMI_PRODUCT_NAME, "P5W DH Deluxe"),
|
|
},
|
|
},
|
|
{ }
|
|
};
|
|
struct pci_dev *pdev = to_pci_dev(host->dev);
|
|
|
|
if (pdev->bus->number == 0 && pdev->devfn == PCI_DEVFN(0x1f, 2) &&
|
|
dmi_check_system(sysids)) {
|
|
struct ata_port *ap = host->ports[1];
|
|
|
|
dev_printk(KERN_INFO, &pdev->dev, "enabling ASUS P5W DH "
|
|
"Deluxe on-board SIMG4726 workaround\n");
|
|
|
|
ap->ops = &ahci_p5wdh_ops;
|
|
ap->link.flags |= ATA_LFLAG_NO_SRST | ATA_LFLAG_ASSUME_ATA;
|
|
}
|
|
}
|
|
|
|
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
struct ata_port_info pi = ahci_port_info[ent->driver_data];
|
|
const struct ata_port_info *ppi[] = { &pi, NULL };
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_host_priv *hpriv;
|
|
struct ata_host *host;
|
|
int n_ports, i, rc;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* acquire resources */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << AHCI_PCI_BAR, DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
|
|
(pdev->device == 0x2652 || pdev->device == 0x2653)) {
|
|
u8 map;
|
|
|
|
/* ICH6s share the same PCI ID for both piix and ahci
|
|
* modes. Enabling ahci mode while MAP indicates
|
|
* combined mode is a bad idea. Yield to ata_piix.
|
|
*/
|
|
pci_read_config_byte(pdev, ICH_MAP, &map);
|
|
if (map & 0x3) {
|
|
dev_printk(KERN_INFO, &pdev->dev, "controller is in "
|
|
"combined mode, can't enable AHCI mode\n");
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
|
|
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
return -ENOMEM;
|
|
hpriv->flags |= (unsigned long)pi.private_data;
|
|
|
|
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
|
|
pci_intx(pdev, 1);
|
|
|
|
/* save initial config */
|
|
ahci_save_initial_config(pdev, hpriv);
|
|
|
|
/* prepare host */
|
|
if (hpriv->cap & HOST_CAP_NCQ)
|
|
pi.flags |= ATA_FLAG_NCQ;
|
|
|
|
if (hpriv->cap & HOST_CAP_PMP)
|
|
pi.flags |= ATA_FLAG_PMP;
|
|
|
|
/* CAP.NP sometimes indicate the index of the last enabled
|
|
* port, at other times, that of the last possible port, so
|
|
* determining the maximum port number requires looking at
|
|
* both CAP.NP and port_map.
|
|
*/
|
|
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
|
|
if (!host)
|
|
return -ENOMEM;
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
host->private_data = hpriv;
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
void __iomem *port_mmio = ahci_port_base(ap);
|
|
|
|
ata_port_pbar_desc(ap, AHCI_PCI_BAR, -1, "abar");
|
|
ata_port_pbar_desc(ap, AHCI_PCI_BAR,
|
|
0x100 + ap->port_no * 0x80, "port");
|
|
|
|
/* set initial link pm policy */
|
|
ap->pm_policy = NOT_AVAILABLE;
|
|
|
|
/* standard SATA port setup */
|
|
if (hpriv->port_map & (1 << i))
|
|
ap->ioaddr.cmd_addr = port_mmio;
|
|
|
|
/* disabled/not-implemented port */
|
|
else
|
|
ap->ops = &ata_dummy_port_ops;
|
|
}
|
|
|
|
/* apply workaround for ASUS P5W DH Deluxe mainboard */
|
|
ahci_p5wdh_workaround(host);
|
|
|
|
/* initialize adapter */
|
|
rc = ahci_configure_dma_masks(pdev, hpriv->cap & HOST_CAP_64);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = ahci_reset_controller(host);
|
|
if (rc)
|
|
return rc;
|
|
|
|
ahci_init_controller(host);
|
|
ahci_print_info(host);
|
|
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, ahci_interrupt, IRQF_SHARED,
|
|
&ahci_sht);
|
|
}
|
|
|
|
static int __init ahci_init(void)
|
|
{
|
|
return pci_register_driver(&ahci_pci_driver);
|
|
}
|
|
|
|
static void __exit ahci_exit(void)
|
|
{
|
|
pci_unregister_driver(&ahci_pci_driver);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("AHCI SATA low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(ahci_init);
|
|
module_exit(ahci_exit);
|