318 lines
8.5 KiB
C
318 lines
8.5 KiB
C
/*
|
|
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/time.h>
|
|
|
|
#include <mach/common.h>
|
|
#include <mach/iomux-mx28.h>
|
|
|
|
#include "devices-mx28.h"
|
|
#include "gpio.h"
|
|
|
|
#define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13)
|
|
#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
|
|
#define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18)
|
|
#define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30)
|
|
#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
|
|
|
|
static const iomux_cfg_t mx28evk_pads[] __initconst = {
|
|
/* duart */
|
|
MX28_PAD_PWM0__DUART_RX | MXS_PAD_CTRL,
|
|
MX28_PAD_PWM1__DUART_TX | MXS_PAD_CTRL,
|
|
|
|
/* auart0 */
|
|
MX28_PAD_AUART0_RX__AUART0_RX | MXS_PAD_CTRL,
|
|
MX28_PAD_AUART0_TX__AUART0_TX | MXS_PAD_CTRL,
|
|
MX28_PAD_AUART0_CTS__AUART0_CTS | MXS_PAD_CTRL,
|
|
MX28_PAD_AUART0_RTS__AUART0_RTS | MXS_PAD_CTRL,
|
|
/* auart3 */
|
|
MX28_PAD_AUART3_RX__AUART3_RX | MXS_PAD_CTRL,
|
|
MX28_PAD_AUART3_TX__AUART3_TX | MXS_PAD_CTRL,
|
|
MX28_PAD_AUART3_CTS__AUART3_CTS | MXS_PAD_CTRL,
|
|
MX28_PAD_AUART3_RTS__AUART3_RTS | MXS_PAD_CTRL,
|
|
|
|
#define MXS_PAD_FEC (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP)
|
|
/* fec0 */
|
|
MX28_PAD_ENET0_MDC__ENET0_MDC | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_MDIO__ENET0_MDIO | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MXS_PAD_FEC,
|
|
MX28_PAD_ENET_CLK__CLKCTRL_ENET | MXS_PAD_FEC,
|
|
/* fec1 */
|
|
MX28_PAD_ENET0_CRS__ENET1_RX_EN | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_COL__ENET1_TX_EN | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MXS_PAD_FEC,
|
|
MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MXS_PAD_FEC,
|
|
/* phy power line */
|
|
MX28_PAD_SSP1_DATA3__GPIO_2_15 | MXS_PAD_CTRL,
|
|
/* phy reset line */
|
|
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 | MXS_PAD_CTRL,
|
|
|
|
/* flexcan0 */
|
|
MX28_PAD_GPMI_RDY2__CAN0_TX,
|
|
MX28_PAD_GPMI_RDY3__CAN0_RX,
|
|
/* flexcan1 */
|
|
MX28_PAD_GPMI_CE2N__CAN1_TX,
|
|
MX28_PAD_GPMI_CE3N__CAN1_RX,
|
|
/* transceiver power control */
|
|
MX28_PAD_SSP1_CMD__GPIO_2_13,
|
|
|
|
/* mxsfb (lcdif) */
|
|
MX28_PAD_LCD_D00__LCD_D0 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D01__LCD_D1 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D02__LCD_D2 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D03__LCD_D3 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D04__LCD_D4 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D05__LCD_D5 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D06__LCD_D6 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D07__LCD_D7 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D08__LCD_D8 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D09__LCD_D9 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D10__LCD_D10 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D11__LCD_D11 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D12__LCD_D12 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D13__LCD_D13 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D14__LCD_D14 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D15__LCD_D15 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D16__LCD_D16 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D17__LCD_D17 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D18__LCD_D18 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D19__LCD_D19 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D20__LCD_D20 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D21__LCD_D21 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D22__LCD_D22 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_D23__LCD_D23 | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_RD_E__LCD_VSYNC | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_RS__LCD_DOTCLK | MXS_PAD_CTRL,
|
|
MX28_PAD_LCD_CS__LCD_ENABLE | MXS_PAD_CTRL,
|
|
/* LCD panel enable */
|
|
MX28_PAD_LCD_RESET__GPIO_3_30 | MXS_PAD_CTRL,
|
|
/* backlight control */
|
|
MX28_PAD_PWM2__GPIO_3_18 | MXS_PAD_CTRL,
|
|
};
|
|
|
|
/* fec */
|
|
static void __init mx28evk_fec_reset(void)
|
|
{
|
|
int ret;
|
|
struct clk *clk;
|
|
|
|
/* Enable fec phy clock */
|
|
clk = clk_get_sys("pll2", NULL);
|
|
if (!IS_ERR(clk))
|
|
clk_enable(clk);
|
|
|
|
/* Power up fec phy */
|
|
ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power");
|
|
if (ret) {
|
|
pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret);
|
|
return;
|
|
}
|
|
|
|
ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0);
|
|
if (ret) {
|
|
pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret);
|
|
return;
|
|
}
|
|
|
|
/* Reset fec phy */
|
|
ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset");
|
|
if (ret) {
|
|
pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret);
|
|
return;
|
|
}
|
|
|
|
gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0);
|
|
if (ret) {
|
|
pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret);
|
|
return;
|
|
}
|
|
|
|
mdelay(1);
|
|
gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
|
|
}
|
|
|
|
static struct fec_platform_data mx28_fec_pdata[] __initdata = {
|
|
{
|
|
/* fec0 */
|
|
.phy = PHY_INTERFACE_MODE_RMII,
|
|
}, {
|
|
/* fec1 */
|
|
.phy = PHY_INTERFACE_MODE_RMII,
|
|
},
|
|
};
|
|
|
|
static int __init mx28evk_fec_get_mac(void)
|
|
{
|
|
int i;
|
|
u32 val;
|
|
const u32 *ocotp = mxs_get_ocotp();
|
|
|
|
if (!ocotp)
|
|
goto error;
|
|
|
|
/*
|
|
* OCOTP only stores the last 4 octets for each mac address,
|
|
* so hard-code Freescale OUI (00:04:9f) here.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
val = ocotp[i * 4];
|
|
mx28_fec_pdata[i].mac[0] = 0x00;
|
|
mx28_fec_pdata[i].mac[1] = 0x04;
|
|
mx28_fec_pdata[i].mac[2] = 0x9f;
|
|
mx28_fec_pdata[i].mac[3] = (val >> 16) & 0xff;
|
|
mx28_fec_pdata[i].mac[4] = (val >> 8) & 0xff;
|
|
mx28_fec_pdata[i].mac[5] = (val >> 0) & 0xff;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error:
|
|
pr_err("%s: timeout when reading fec mac from OCOTP\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* MX28EVK_FLEXCAN_SWITCH is shared between both flexcan controllers
|
|
*/
|
|
static int flexcan0_en, flexcan1_en;
|
|
|
|
static void mx28evk_flexcan_switch(void)
|
|
{
|
|
if (flexcan0_en || flexcan1_en)
|
|
gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 1);
|
|
else
|
|
gpio_set_value(MX28EVK_FLEXCAN_SWITCH, 0);
|
|
}
|
|
|
|
static void mx28evk_flexcan0_switch(int enable)
|
|
{
|
|
flexcan0_en = enable;
|
|
mx28evk_flexcan_switch();
|
|
}
|
|
|
|
static void mx28evk_flexcan1_switch(int enable)
|
|
{
|
|
flexcan1_en = enable;
|
|
mx28evk_flexcan_switch();
|
|
}
|
|
|
|
static const struct flexcan_platform_data
|
|
mx28evk_flexcan_pdata[] __initconst = {
|
|
{
|
|
.transceiver_switch = mx28evk_flexcan0_switch,
|
|
}, {
|
|
.transceiver_switch = mx28evk_flexcan1_switch,
|
|
}
|
|
};
|
|
|
|
/* mxsfb (lcdif) */
|
|
static struct fb_videomode mx28evk_video_modes[] = {
|
|
{
|
|
.name = "Seiko-43WVF1G",
|
|
.refresh = 60,
|
|
.xres = 800,
|
|
.yres = 480,
|
|
.pixclock = 29851, /* picosecond (33.5 MHz) */
|
|
.left_margin = 89,
|
|
.right_margin = 164,
|
|
.upper_margin = 23,
|
|
.lower_margin = 10,
|
|
.hsync_len = 10,
|
|
.vsync_len = 10,
|
|
.sync = FB_SYNC_DATA_ENABLE_HIGH_ACT |
|
|
FB_SYNC_DOTCLK_FAILING_ACT,
|
|
},
|
|
};
|
|
|
|
static const struct mxsfb_platform_data mx28evk_mxsfb_pdata __initconst = {
|
|
.mode_list = mx28evk_video_modes,
|
|
.mode_count = ARRAY_SIZE(mx28evk_video_modes),
|
|
.default_bpp = 32,
|
|
.ld_intf_width = STMLCDIF_24BIT,
|
|
};
|
|
|
|
static void __init mx28evk_init(void)
|
|
{
|
|
int ret;
|
|
|
|
mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
|
|
|
|
mx28_add_duart();
|
|
mx28_add_auart0();
|
|
mx28_add_auart3();
|
|
|
|
if (mx28evk_fec_get_mac())
|
|
pr_warn("%s: failed on fec mac setup\n", __func__);
|
|
|
|
mx28evk_fec_reset();
|
|
mx28_add_fec(0, &mx28_fec_pdata[0]);
|
|
mx28_add_fec(1, &mx28_fec_pdata[1]);
|
|
|
|
ret = gpio_request_one(MX28EVK_FLEXCAN_SWITCH, GPIOF_DIR_OUT,
|
|
"flexcan-switch");
|
|
if (ret) {
|
|
pr_err("failed to request gpio flexcan-switch: %d\n", ret);
|
|
} else {
|
|
mx28_add_flexcan(0, &mx28evk_flexcan_pdata[0]);
|
|
mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
|
|
}
|
|
|
|
ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
|
|
if (ret)
|
|
pr_warn("failed to request gpio lcd-enable: %d\n", ret);
|
|
else
|
|
gpio_set_value(MX28EVK_LCD_ENABLE, 1);
|
|
|
|
ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
|
|
if (ret)
|
|
pr_warn("failed to request gpio bl-enable: %d\n", ret);
|
|
else
|
|
gpio_set_value(MX28EVK_BL_ENABLE, 1);
|
|
|
|
mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
|
|
}
|
|
|
|
static void __init mx28evk_timer_init(void)
|
|
{
|
|
mx28_clocks_init();
|
|
}
|
|
|
|
static struct sys_timer mx28evk_timer = {
|
|
.init = mx28evk_timer_init,
|
|
};
|
|
|
|
MACHINE_START(MX28EVK, "Freescale MX28 EVK")
|
|
/* Maintainer: Freescale Semiconductor, Inc. */
|
|
.map_io = mx28_map_io,
|
|
.init_irq = mx28_init_irq,
|
|
.init_machine = mx28evk_init,
|
|
.timer = &mx28evk_timer,
|
|
MACHINE_END
|