307 lines
8.7 KiB
C
307 lines
8.7 KiB
C
/*
|
|
* Copyright (C) 2014-15 Synopsys, Inc. (www.synopsys.com)
|
|
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Vineetg: March 2009 (Supporting 2 levels of Interrupts)
|
|
* Stack switching code can no longer reliably rely on the fact that
|
|
* if we are NOT in user mode, stack is switched to kernel mode.
|
|
* e.g. L2 IRQ interrupted a L1 ISR which had not yet completed
|
|
* it's prologue including stack switching from user mode
|
|
*
|
|
* Vineetg: Aug 28th 2008: Bug #94984
|
|
* -Zero Overhead Loop Context shd be cleared when entering IRQ/EXcp/Trap
|
|
* Normally CPU does this automatically, however when doing FAKE rtie,
|
|
* we also need to explicitly do this. The problem in macros
|
|
* FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
|
|
* was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context
|
|
*
|
|
* Vineetg: May 5th 2008
|
|
* -Modified CALLEE_REG save/restore macros to handle the fact that
|
|
* r25 contains the kernel current task ptr
|
|
* - Defined Stack Switching Macro to be reused in all intr/excp hdlrs
|
|
* - Shaved off 11 instructions from RESTORE_ALL_INT1 by using the
|
|
* address Write back load ld.ab instead of seperate ld/add instn
|
|
*
|
|
* Amit Bhor, Sameer Dhavale: Codito Technologies 2004
|
|
*/
|
|
|
|
#ifndef __ASM_ARC_ENTRY_COMPACT_H
|
|
#define __ASM_ARC_ENTRY_COMPACT_H
|
|
|
|
#include <asm/asm-offsets.h>
|
|
#include <asm/thread_info.h> /* For THREAD_SIZE */
|
|
|
|
/*--------------------------------------------------------------
|
|
* Switch to Kernel Mode stack if SP points to User Mode stack
|
|
*
|
|
* Entry : r9 contains pre-IRQ/exception/trap status32
|
|
* Exit : SP set to K mode stack
|
|
* SP at the time of entry (K/U) saved @ pt_regs->sp
|
|
* Clobbers: r9
|
|
*-------------------------------------------------------------*/
|
|
|
|
.macro SWITCH_TO_KERNEL_STK
|
|
|
|
/* User Mode when this happened ? Yes: Proceed to switch stack */
|
|
bbit1 r9, STATUS_U_BIT, 88f
|
|
|
|
/* OK we were already in kernel mode when this event happened, thus can
|
|
* assume SP is kernel mode SP. _NO_ need to do any stack switching
|
|
*/
|
|
|
|
#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
|
|
/* However....
|
|
* If Level 2 Interrupts enabled, we may end up with a corner case:
|
|
* 1. User Task executing
|
|
* 2. L1 IRQ taken, ISR starts (CPU auto-switched to KERNEL mode)
|
|
* 3. But before it could switch SP from USER to KERNEL stack
|
|
* a L2 IRQ "Interrupts" L1
|
|
* Thay way although L2 IRQ happened in Kernel mode, stack is still
|
|
* not switched.
|
|
* To handle this, we may need to switch stack even if in kernel mode
|
|
* provided SP has values in range of USER mode stack ( < 0x7000_0000 )
|
|
*/
|
|
brlo sp, VMALLOC_START, 88f
|
|
|
|
/* TODO: vineetg:
|
|
* We need to be a bit more cautious here. What if a kernel bug in
|
|
* L1 ISR, caused SP to go whaco (some small value which looks like
|
|
* USER stk) and then we take L2 ISR.
|
|
* Above brlo alone would treat it as a valid L1-L2 sceanrio
|
|
* instead of shouting alound
|
|
* The only feasible way is to make sure this L2 happened in
|
|
* L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
|
|
* L1 ISR before it switches stack
|
|
*/
|
|
|
|
#endif
|
|
|
|
/*------Intr/Ecxp happened in kernel mode, SP already setup ------ */
|
|
/* save it nevertheless @ pt_regs->sp for uniformity */
|
|
|
|
b.d 66f
|
|
st sp, [sp, PT_sp - SZ_PT_REGS]
|
|
|
|
88: /*------Intr/Ecxp happened in user mode, "switch" stack ------ */
|
|
|
|
GET_CURR_TASK_ON_CPU r9
|
|
|
|
/* With current tsk in r9, get it's kernel mode stack base */
|
|
GET_TSK_STACK_BASE r9, r9
|
|
|
|
/* save U mode SP @ pt_regs->sp */
|
|
st sp, [r9, PT_sp - SZ_PT_REGS]
|
|
|
|
/* final SP switch */
|
|
mov sp, r9
|
|
66:
|
|
.endm
|
|
|
|
/*------------------------------------------------------------
|
|
* "FAKE" a rtie to return from CPU Exception context
|
|
* This is to re-enable Exceptions within exception
|
|
* Look at EV_ProtV to see how this is actually used
|
|
*-------------------------------------------------------------*/
|
|
|
|
.macro FAKE_RET_FROM_EXCPN
|
|
|
|
ld r9, [sp, PT_status32]
|
|
bic r9, r9, (STATUS_U_MASK|STATUS_DE_MASK)
|
|
bset r9, r9, STATUS_L_BIT
|
|
sr r9, [erstatus]
|
|
mov r9, 55f
|
|
sr r9, [eret]
|
|
|
|
rtie
|
|
55:
|
|
.endm
|
|
|
|
/*--------------------------------------------------------------
|
|
* For early Exception/ISR Prologue, a core reg is temporarily needed to
|
|
* code the rest of prolog (stack switching). This is done by stashing
|
|
* it to memory (non-SMP case) or SCRATCH0 Aux Reg (SMP).
|
|
*
|
|
* Before saving the full regfile - this reg is restored back, only
|
|
* to be saved again on kernel mode stack, as part of pt_regs.
|
|
*-------------------------------------------------------------*/
|
|
.macro PROLOG_FREEUP_REG reg, mem
|
|
#ifdef CONFIG_SMP
|
|
sr \reg, [ARC_REG_SCRATCH_DATA0]
|
|
#else
|
|
st \reg, [\mem]
|
|
#endif
|
|
.endm
|
|
|
|
.macro PROLOG_RESTORE_REG reg, mem
|
|
#ifdef CONFIG_SMP
|
|
lr \reg, [ARC_REG_SCRATCH_DATA0]
|
|
#else
|
|
ld \reg, [\mem]
|
|
#endif
|
|
.endm
|
|
|
|
/*--------------------------------------------------------------
|
|
* Exception Entry prologue
|
|
* -Switches stack to K mode (if not already)
|
|
* -Saves the register file
|
|
*
|
|
* After this it is safe to call the "C" handlers
|
|
*-------------------------------------------------------------*/
|
|
.macro EXCEPTION_PROLOGUE
|
|
|
|
/* Need at least 1 reg to code the early exception prologue */
|
|
PROLOG_FREEUP_REG r9, @ex_saved_reg1
|
|
|
|
/* U/K mode at time of exception (stack not switched if already K) */
|
|
lr r9, [erstatus]
|
|
|
|
/* ARC700 doesn't provide auto-stack switching */
|
|
SWITCH_TO_KERNEL_STK
|
|
|
|
#ifdef CONFIG_ARC_CURR_IN_REG
|
|
/* Treat r25 as scratch reg (save on stack) and load with "current" */
|
|
PUSH r25
|
|
GET_CURR_TASK_ON_CPU r25
|
|
#else
|
|
sub sp, sp, 4
|
|
#endif
|
|
|
|
st.a r0, [sp, -8] /* orig_r0 needed for syscall (skip ECR slot) */
|
|
sub sp, sp, 4 /* skip pt_regs->sp, already saved above */
|
|
|
|
/* Restore r9 used to code the early prologue */
|
|
PROLOG_RESTORE_REG r9, @ex_saved_reg1
|
|
|
|
/* now we are ready to save the regfile */
|
|
SAVE_R0_TO_R12
|
|
PUSH gp
|
|
PUSH fp
|
|
PUSH blink
|
|
PUSHAX eret
|
|
PUSHAX erstatus
|
|
PUSH lp_count
|
|
PUSHAX lp_end
|
|
PUSHAX lp_start
|
|
PUSHAX erbta
|
|
|
|
lr r9, [ecr]
|
|
st r9, [sp, PT_event] /* EV_Trap expects r9 to have ECR */
|
|
.endm
|
|
|
|
/*--------------------------------------------------------------
|
|
* Restore all registers used by system call or Exceptions
|
|
* SP should always be pointing to the next free stack element
|
|
* when entering this macro.
|
|
*
|
|
* NOTE:
|
|
*
|
|
* It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
|
|
* for memory load operations. If used in that way interrupts are deffered
|
|
* by hardware and that is not good.
|
|
*-------------------------------------------------------------*/
|
|
.macro EXCEPTION_EPILOGUE
|
|
POPAX erbta
|
|
POPAX lp_start
|
|
POPAX lp_end
|
|
|
|
POP r9
|
|
mov lp_count, r9 ;LD to lp_count is not allowed
|
|
|
|
POPAX erstatus
|
|
POPAX eret
|
|
POP blink
|
|
POP fp
|
|
POP gp
|
|
RESTORE_R12_TO_R0
|
|
|
|
ld sp, [sp] /* restore original sp */
|
|
/* orig_r0, ECR, user_r25 skipped automatically */
|
|
.endm
|
|
|
|
/* Dummy ECR values for Interrupts */
|
|
#define event_IRQ1 0x0031abcd
|
|
#define event_IRQ2 0x0032abcd
|
|
|
|
.macro INTERRUPT_PROLOGUE LVL
|
|
|
|
/* free up r9 as scratchpad */
|
|
PROLOG_FREEUP_REG r9, @int\LVL\()_saved_reg
|
|
|
|
/* Which mode (user/kernel) was the system in when intr occured */
|
|
lr r9, [status32_l\LVL\()]
|
|
|
|
SWITCH_TO_KERNEL_STK
|
|
|
|
#ifdef CONFIG_ARC_CURR_IN_REG
|
|
/* Treat r25 as scratch reg (save on stack) and load with "current" */
|
|
PUSH r25
|
|
GET_CURR_TASK_ON_CPU r25
|
|
#else
|
|
sub sp, sp, 4
|
|
#endif
|
|
|
|
PUSH 0x003\LVL\()abcd /* Dummy ECR */
|
|
sub sp, sp, 8 /* skip orig_r0 (not needed)
|
|
skip pt_regs->sp, already saved above */
|
|
|
|
/* Restore r9 used to code the early prologue */
|
|
PROLOG_RESTORE_REG r9, @int\LVL\()_saved_reg
|
|
|
|
SAVE_R0_TO_R12
|
|
PUSH gp
|
|
PUSH fp
|
|
PUSH blink
|
|
PUSH ilink\LVL\()
|
|
PUSHAX status32_l\LVL\()
|
|
PUSH lp_count
|
|
PUSHAX lp_end
|
|
PUSHAX lp_start
|
|
PUSHAX bta_l\LVL\()
|
|
.endm
|
|
|
|
/*--------------------------------------------------------------
|
|
* Restore all registers used by interrupt handlers.
|
|
*
|
|
* NOTE:
|
|
*
|
|
* It is recommended that lp_count/ilink1/ilink2 not be used as a dest reg
|
|
* for memory load operations. If used in that way interrupts are deffered
|
|
* by hardware and that is not good.
|
|
*-------------------------------------------------------------*/
|
|
.macro INTERRUPT_EPILOGUE LVL
|
|
POPAX bta_l\LVL\()
|
|
POPAX lp_start
|
|
POPAX lp_end
|
|
|
|
POP r9
|
|
mov lp_count, r9 ;LD to lp_count is not allowed
|
|
|
|
POPAX status32_l\LVL\()
|
|
POP ilink\LVL\()
|
|
POP blink
|
|
POP fp
|
|
POP gp
|
|
RESTORE_R12_TO_R0
|
|
|
|
ld sp, [sp] /* restore original sp */
|
|
/* orig_r0, ECR, user_r25 skipped automatically */
|
|
.endm
|
|
|
|
/* Get thread_info of "current" tsk */
|
|
.macro GET_CURR_THR_INFO_FROM_SP reg
|
|
bic \reg, sp, (THREAD_SIZE - 1)
|
|
.endm
|
|
|
|
/* Get CPU-ID of this core */
|
|
.macro GET_CPU_ID reg
|
|
lr \reg, [identity]
|
|
lsr \reg, \reg, 8
|
|
bmsk \reg, \reg, 7
|
|
.endm
|
|
|
|
#endif /* __ASM_ARC_ENTRY_COMPACT_H */
|