6fca5e3f55
The patch improves the I2C write performance by 20 - 30 percent by
revising the sleep time in the ft260_hid_output_report_check_status()
in the following ways:
1. Reduce the wait time and start to poll earlier.
Sending a large amount of data at a low I2C clock rate saturates the
internal FT260 buffer and causes hiccups in status readiness, as shown
below in the log fragment. Aligning the status check wait time to the
worst case significantly reduces the write performance.
[Oct22 10:28] ft260_i2c_write: rep 0xd8 addr 0x51 off 0 len 34 d[0] 0x0
[ +0.005296] ft260_xfer_status: bus_status 0x20, clock 100
[ +0.013460] ft260_i2c_write: rep 0xd8 addr 0x51 off 0 len 34 d[0] 0x0
[ +0.003244] ft260_hid_output_report_check_status: wait 1920 usec, len 38
[ +0.000190] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.015324] ft260_i2c_write: rep 0xd8 addr 0x51 off 0 len 34 d[0] 0x0
[ +0.003491] ft260_hid_output_report_check_status: wait 1920 usec, len 38
[ +0.000202] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.016047] ft260_i2c_write: rep 0xd8 addr 0x51 off 0 len 34 d[0] 0x0
[ +0.002768] ft260_hid_output_report_check_status: wait 1920 usec, len 38
[ +0.000150] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.011389] ft260_i2c_write: rep 0xd8 addr 0x51 off 0 len 34 d[0] 0x0
[ +0.003467] ft260_hid_output_report_check_status: wait 1920 usec, len 38
[ +0.000191] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000172] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000131] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000241] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000233] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000190] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000196] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.011314] ft260_i2c_write: rep 0xd8 addr 0x51 off 0 len 34 d[0] 0x0
[ +0.003334] ft260_hid_output_report_check_status: wait 1920 usec, len 38
[ +0.000227] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000204] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000198] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000147] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.011060] ft260_i2c_write: rep 0xd8 addr 0x51 off 0 len 34 d[0] 0x0
Before:
$ sudo ./i2cperf -f 2 -o 2 -s 32 -r 0-0xff 13 0x51 -S
Fill block with increment via i2ctransfer by chunks
-------------------------------------------------------------------
data rate(bps) efficiency(%) data size(B) total IOs IO size(B)
-------------------------------------------------------------------
40510 80 256 8 32
After:
$ sudo ./i2cperf -f 2 -o 2 -s 32 -r 0-0xff 13 0x51 -S
Fill block with increment via i2ctransfer by chunks
-------------------------------------------------------------------
data rate(bps) efficiency(%) data size(B) total IOs IO size(B)
-------------------------------------------------------------------
52584 80 256 8 32
2. Do not sleep if the estimated I2C transfer time is below 2 ms since
the first xfer status query frequently takes around 1.5 ms, and the
following status queries take about 200us on average. So we usually
return from the routine after the first 1 - 3 status checks.
[Oct22 11:14] ft260_i2c_write: rep 0xd4 addr 0x51 off 0 len 18 d[0] 0x0
[ +0.004270] ft260_xfer_status: bus_status 0x20, clock 100
[ +0.013889] ft260_i2c_write: rep 0xd4 addr 0x51 off 0 len 18 d[0] 0x0
[ +0.000856] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000138] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.013352] ft260_i2c_write: rep 0xd4 addr 0x51 off 0 len 18 d[0] 0x0
[ +0.001501] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000177] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.014477] ft260_i2c_write: rep 0xd4 addr 0x51 off 0 len 18 d[0] 0x0
[ +0.001377] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000233] ft260_xfer_status: bus_status 0x41, clock 100
[ +0.000191] ft260_xfer_status: bus_status 0x40, clock 100
[ +0.013197] ft260_i2c_write: rep 0xd4 addr 0x51 off 0 len 18 d[0] 0x0
Before:
$ sudo ./i2cperf -f 2 -o 2 -s 16 -r 0-0xff 13 0x51 -S
Fill block with increment via i2ctransfer by chunks
-------------------------------------------------------------------
data rate(bps) efficiency(%) data size(B) total IOs IO size(B)
-------------------------------------------------------------------
28826 73 256 16 16
After:
$ sudo ./i2cperf -f 2 -o 2 -s 16 -r 0-0xff 13 0x51 -S
Fill block with increment via i2ctransfer by chunks
-------------------------------------------------------------------
data rate(bps) efficiency(%) data size(B) total IOs IO size(B)
-------------------------------------------------------------------
45138 73 256 16 16
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Tested-by: Guillaume Champagne <champagne.guillaume.c@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
||
|---|---|---|
| Documentation | ||
| LICENSES | ||
| arch | ||
| block | ||
| certs | ||
| crypto | ||
| drivers | ||
| fs | ||
| include | ||
| init | ||
| io_uring | ||
| ipc | ||
| kernel | ||
| lib | ||
| mm | ||
| net | ||
| rust | ||
| samples | ||
| scripts | ||
| security | ||
| sound | ||
| tools | ||
| usr | ||
| virt | ||
| .clang-format | ||
| .cocciconfig | ||
| .get_maintainer.ignore | ||
| .gitattributes | ||
| .gitignore | ||
| .mailmap | ||
| .rustfmt.toml | ||
| COPYING | ||
| CREDITS | ||
| Kbuild | ||
| Kconfig | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
README
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.