384 lines
10 KiB
C
384 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (C) 2015 Xilinx, Inc.
|
|
* CEVA AHCI SATA platform driver
|
|
*
|
|
* based on the AHCI SATA platform driver by Jeff Garzik and Anton Vorontsov
|
|
*/
|
|
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reset.h>
|
|
#include "ahci.h"
|
|
|
|
/* Vendor Specific Register Offsets */
|
|
#define AHCI_VEND_PCFG 0xA4
|
|
#define AHCI_VEND_PPCFG 0xA8
|
|
#define AHCI_VEND_PP2C 0xAC
|
|
#define AHCI_VEND_PP3C 0xB0
|
|
#define AHCI_VEND_PP4C 0xB4
|
|
#define AHCI_VEND_PP5C 0xB8
|
|
#define AHCI_VEND_AXICC 0xBC
|
|
#define AHCI_VEND_PAXIC 0xC0
|
|
#define AHCI_VEND_PTC 0xC8
|
|
|
|
/* Vendor Specific Register bit definitions */
|
|
#define PAXIC_ADBW_BW64 0x1
|
|
#define PAXIC_MAWID(i) (((i) * 2) << 4)
|
|
#define PAXIC_MARID(i) (((i) * 2) << 12)
|
|
#define PAXIC_MARIDD(i) ((((i) * 2) + 1) << 16)
|
|
#define PAXIC_MAWIDD(i) ((((i) * 2) + 1) << 8)
|
|
#define PAXIC_OTL (0x4 << 20)
|
|
|
|
/* Register bit definitions for cache control */
|
|
#define AXICC_ARCA_VAL (0xF << 0)
|
|
#define AXICC_ARCF_VAL (0xF << 4)
|
|
#define AXICC_ARCH_VAL (0xF << 8)
|
|
#define AXICC_ARCP_VAL (0xF << 12)
|
|
#define AXICC_AWCFD_VAL (0xF << 16)
|
|
#define AXICC_AWCD_VAL (0xF << 20)
|
|
#define AXICC_AWCF_VAL (0xF << 24)
|
|
|
|
#define PCFG_TPSS_VAL (0x32 << 16)
|
|
#define PCFG_TPRS_VAL (0x2 << 12)
|
|
#define PCFG_PAD_VAL 0x2
|
|
|
|
#define PPCFG_TTA 0x1FFFE
|
|
#define PPCFG_PSSO_EN (1 << 28)
|
|
#define PPCFG_PSS_EN (1 << 29)
|
|
#define PPCFG_ESDF_EN (1 << 31)
|
|
|
|
#define PP5C_RIT 0x60216
|
|
#define PP5C_RCT (0x7f0 << 20)
|
|
|
|
#define PTC_RX_WM_VAL 0x40
|
|
#define PTC_RSVD (1 << 27)
|
|
|
|
#define PORT0_BASE 0x100
|
|
#define PORT1_BASE 0x180
|
|
|
|
/* Port Control Register Bit Definitions */
|
|
#define PORT_SCTL_SPD_GEN3 (0x3 << 4)
|
|
#define PORT_SCTL_SPD_GEN2 (0x2 << 4)
|
|
#define PORT_SCTL_SPD_GEN1 (0x1 << 4)
|
|
#define PORT_SCTL_IPM (0x3 << 8)
|
|
|
|
#define PORT_BASE 0x100
|
|
#define PORT_OFFSET 0x80
|
|
#define NR_PORTS 2
|
|
#define DRV_NAME "ahci-ceva"
|
|
#define CEVA_FLAG_BROKEN_GEN2 1
|
|
|
|
static unsigned int rx_watermark = PTC_RX_WM_VAL;
|
|
module_param(rx_watermark, uint, 0644);
|
|
MODULE_PARM_DESC(rx_watermark, "RxWaterMark value (0 - 0x80)");
|
|
|
|
struct ceva_ahci_priv {
|
|
struct platform_device *ahci_pdev;
|
|
/* Port Phy2Cfg Register */
|
|
u32 pp2c[NR_PORTS];
|
|
u32 pp3c[NR_PORTS];
|
|
u32 pp4c[NR_PORTS];
|
|
u32 pp5c[NR_PORTS];
|
|
/* Axi Cache Control Register */
|
|
u32 axicc;
|
|
bool is_cci_enabled;
|
|
int flags;
|
|
struct reset_control *rst;
|
|
};
|
|
|
|
static unsigned int ceva_ahci_read_id(struct ata_device *dev,
|
|
struct ata_taskfile *tf, u16 *id)
|
|
{
|
|
u32 err_mask;
|
|
|
|
err_mask = ata_do_dev_read_id(dev, tf, id);
|
|
if (err_mask)
|
|
return err_mask;
|
|
/*
|
|
* Since CEVA controller does not support device sleep feature, we
|
|
* need to clear DEVSLP (bit 8) in word78 of the IDENTIFY DEVICE data.
|
|
*/
|
|
id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ata_port_operations ahci_ceva_ops = {
|
|
.inherits = &ahci_platform_ops,
|
|
.read_id = ceva_ahci_read_id,
|
|
};
|
|
|
|
static const struct ata_port_info ahci_ceva_port_info = {
|
|
.flags = AHCI_FLAG_COMMON,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_ceva_ops,
|
|
};
|
|
|
|
static void ahci_ceva_setup(struct ahci_host_priv *hpriv)
|
|
{
|
|
void __iomem *mmio = hpriv->mmio;
|
|
struct ceva_ahci_priv *cevapriv = hpriv->plat_data;
|
|
u32 tmp;
|
|
int i;
|
|
|
|
/* Set AHCI Enable */
|
|
tmp = readl(mmio + HOST_CTL);
|
|
tmp |= HOST_AHCI_EN;
|
|
writel(tmp, mmio + HOST_CTL);
|
|
|
|
for (i = 0; i < NR_PORTS; i++) {
|
|
/* TPSS TPRS scalars, CISE and Port Addr */
|
|
tmp = PCFG_TPSS_VAL | PCFG_TPRS_VAL | (PCFG_PAD_VAL + i);
|
|
writel(tmp, mmio + AHCI_VEND_PCFG);
|
|
|
|
/*
|
|
* AXI Data bus width to 64
|
|
* Set Mem Addr Read, Write ID for data transfers
|
|
* Set Mem Addr Read ID, Write ID for non-data transfers
|
|
* Transfer limit to 72 DWord
|
|
*/
|
|
tmp = PAXIC_ADBW_BW64 | PAXIC_MAWIDD(i) | PAXIC_MARIDD(i) |
|
|
PAXIC_MAWID(i) | PAXIC_MARID(i) | PAXIC_OTL;
|
|
writel(tmp, mmio + AHCI_VEND_PAXIC);
|
|
|
|
/* Set AXI cache control register if CCi is enabled */
|
|
if (cevapriv->is_cci_enabled) {
|
|
tmp = readl(mmio + AHCI_VEND_AXICC);
|
|
tmp |= AXICC_ARCA_VAL | AXICC_ARCF_VAL |
|
|
AXICC_ARCH_VAL | AXICC_ARCP_VAL |
|
|
AXICC_AWCFD_VAL | AXICC_AWCD_VAL |
|
|
AXICC_AWCF_VAL;
|
|
writel(tmp, mmio + AHCI_VEND_AXICC);
|
|
}
|
|
|
|
/* Port Phy Cfg register enables */
|
|
tmp = PPCFG_TTA | PPCFG_PSS_EN | PPCFG_ESDF_EN;
|
|
writel(tmp, mmio + AHCI_VEND_PPCFG);
|
|
|
|
/* Phy Control OOB timing parameters COMINIT */
|
|
writel(cevapriv->pp2c[i], mmio + AHCI_VEND_PP2C);
|
|
|
|
/* Phy Control OOB timing parameters COMWAKE */
|
|
writel(cevapriv->pp3c[i], mmio + AHCI_VEND_PP3C);
|
|
|
|
/* Phy Control Burst timing setting */
|
|
writel(cevapriv->pp4c[i], mmio + AHCI_VEND_PP4C);
|
|
|
|
/* Rate Change Timer and Retry Interval Timer setting */
|
|
writel(cevapriv->pp5c[i], mmio + AHCI_VEND_PP5C);
|
|
|
|
/* Rx Watermark setting */
|
|
tmp = rx_watermark | PTC_RSVD;
|
|
writel(tmp, mmio + AHCI_VEND_PTC);
|
|
|
|
/* Default to Gen 3 Speed and Gen 1 if Gen2 is broken */
|
|
tmp = PORT_SCTL_SPD_GEN3 | PORT_SCTL_IPM;
|
|
if (cevapriv->flags & CEVA_FLAG_BROKEN_GEN2)
|
|
tmp = PORT_SCTL_SPD_GEN1 | PORT_SCTL_IPM;
|
|
writel(tmp, mmio + PORT_SCR_CTL + PORT_BASE + PORT_OFFSET * i);
|
|
}
|
|
}
|
|
|
|
static struct scsi_host_template ahci_platform_sht = {
|
|
AHCI_SHT(DRV_NAME),
|
|
};
|
|
|
|
static int ceva_ahci_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device *dev = &pdev->dev;
|
|
struct ahci_host_priv *hpriv;
|
|
struct ceva_ahci_priv *cevapriv;
|
|
enum dev_dma_attr attr;
|
|
int rc;
|
|
|
|
cevapriv = devm_kzalloc(dev, sizeof(*cevapriv), GFP_KERNEL);
|
|
if (!cevapriv)
|
|
return -ENOMEM;
|
|
|
|
cevapriv->ahci_pdev = pdev;
|
|
|
|
cevapriv->rst = devm_reset_control_get_optional_exclusive(&pdev->dev,
|
|
NULL);
|
|
if (IS_ERR(cevapriv->rst))
|
|
dev_err_probe(&pdev->dev, PTR_ERR(cevapriv->rst),
|
|
"failed to get reset\n");
|
|
|
|
hpriv = ahci_platform_get_resources(pdev, 0);
|
|
if (IS_ERR(hpriv))
|
|
return PTR_ERR(hpriv);
|
|
|
|
if (!cevapriv->rst) {
|
|
rc = ahci_platform_enable_resources(hpriv);
|
|
if (rc)
|
|
return rc;
|
|
} else {
|
|
int i;
|
|
|
|
rc = ahci_platform_enable_clks(hpriv);
|
|
if (rc)
|
|
return rc;
|
|
/* Assert the controller reset */
|
|
reset_control_assert(cevapriv->rst);
|
|
|
|
for (i = 0; i < hpriv->nports; i++) {
|
|
rc = phy_init(hpriv->phys[i]);
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* De-assert the controller reset */
|
|
reset_control_deassert(cevapriv->rst);
|
|
|
|
for (i = 0; i < hpriv->nports; i++) {
|
|
rc = phy_power_on(hpriv->phys[i]);
|
|
if (rc) {
|
|
phy_exit(hpriv->phys[i]);
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (of_property_read_bool(np, "ceva,broken-gen2"))
|
|
cevapriv->flags = CEVA_FLAG_BROKEN_GEN2;
|
|
|
|
/* Read OOB timing value for COMINIT from device-tree */
|
|
if (of_property_read_u8_array(np, "ceva,p0-cominit-params",
|
|
(u8 *)&cevapriv->pp2c[0], 4) < 0) {
|
|
dev_warn(dev, "ceva,p0-cominit-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_u8_array(np, "ceva,p1-cominit-params",
|
|
(u8 *)&cevapriv->pp2c[1], 4) < 0) {
|
|
dev_warn(dev, "ceva,p1-cominit-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Read OOB timing value for COMWAKE from device-tree*/
|
|
if (of_property_read_u8_array(np, "ceva,p0-comwake-params",
|
|
(u8 *)&cevapriv->pp3c[0], 4) < 0) {
|
|
dev_warn(dev, "ceva,p0-comwake-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_u8_array(np, "ceva,p1-comwake-params",
|
|
(u8 *)&cevapriv->pp3c[1], 4) < 0) {
|
|
dev_warn(dev, "ceva,p1-comwake-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Read phy BURST timing value from device-tree */
|
|
if (of_property_read_u8_array(np, "ceva,p0-burst-params",
|
|
(u8 *)&cevapriv->pp4c[0], 4) < 0) {
|
|
dev_warn(dev, "ceva,p0-burst-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_u8_array(np, "ceva,p1-burst-params",
|
|
(u8 *)&cevapriv->pp4c[1], 4) < 0) {
|
|
dev_warn(dev, "ceva,p1-burst-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Read phy RETRY interval timing value from device-tree */
|
|
if (of_property_read_u16_array(np, "ceva,p0-retry-params",
|
|
(u16 *)&cevapriv->pp5c[0], 2) < 0) {
|
|
dev_warn(dev, "ceva,p0-retry-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (of_property_read_u16_array(np, "ceva,p1-retry-params",
|
|
(u16 *)&cevapriv->pp5c[1], 2) < 0) {
|
|
dev_warn(dev, "ceva,p1-retry-params property not defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Check if CCI is enabled for SATA. The DEV_DMA_COHERENT is returned
|
|
* if CCI is enabled, so check for DEV_DMA_COHERENT.
|
|
*/
|
|
attr = device_get_dma_attr(dev);
|
|
cevapriv->is_cci_enabled = (attr == DEV_DMA_COHERENT);
|
|
|
|
hpriv->plat_data = cevapriv;
|
|
|
|
/* CEVA specific initialization */
|
|
ahci_ceva_setup(hpriv);
|
|
|
|
rc = ahci_platform_init_host(pdev, hpriv, &ahci_ceva_port_info,
|
|
&ahci_platform_sht);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
return 0;
|
|
|
|
disable_resources:
|
|
ahci_platform_disable_resources(hpriv);
|
|
return rc;
|
|
}
|
|
|
|
static int __maybe_unused ceva_ahci_suspend(struct device *dev)
|
|
{
|
|
return ahci_platform_suspend(dev);
|
|
}
|
|
|
|
static int __maybe_unused ceva_ahci_resume(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
int rc;
|
|
|
|
rc = ahci_platform_enable_resources(hpriv);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* Configure CEVA specific config before resuming HBA */
|
|
ahci_ceva_setup(hpriv);
|
|
|
|
rc = ahci_platform_resume_host(dev);
|
|
if (rc)
|
|
goto disable_resources;
|
|
|
|
/* We resumed so update PM runtime state */
|
|
pm_runtime_disable(dev);
|
|
pm_runtime_set_active(dev);
|
|
pm_runtime_enable(dev);
|
|
|
|
return 0;
|
|
|
|
disable_resources:
|
|
ahci_platform_disable_resources(hpriv);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(ahci_ceva_pm_ops, ceva_ahci_suspend, ceva_ahci_resume);
|
|
|
|
static const struct of_device_id ceva_ahci_of_match[] = {
|
|
{ .compatible = "ceva,ahci-1v84" },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ceva_ahci_of_match);
|
|
|
|
static struct platform_driver ceva_ahci_driver = {
|
|
.probe = ceva_ahci_probe,
|
|
.remove = ata_platform_remove_one,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = ceva_ahci_of_match,
|
|
.pm = &ahci_ceva_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(ceva_ahci_driver);
|
|
|
|
MODULE_DESCRIPTION("CEVA AHCI SATA platform driver");
|
|
MODULE_AUTHOR("Xilinx Inc.");
|
|
MODULE_LICENSE("GPL v2");
|