OpenCloudOS-Kernel/drivers/firmware
Greg Kroah-Hartman 9c15db92a8 1st set of IIO/counter device support, features and cleanup in the 5.13 cycle
Big set in here from Alexandru Ardelean enabling multiple buffer support.
 This includes providing a new directory per buffer that combines
 what was previously in buffer/ and scan_elements/. Old interfaces still
 in place for compatiblity.
 
 Note immuatable branch for scmi patches to allow for some significant
 rework going on in that subsystem.  Merge required updating to reflect
 some changes in IIO.
 
 Late rebase to fix some wrong fixes tags due to some earlier rebases
 made necessary by messing up the immutable branch.
 
 IIO New Device Support
 * adi,ad5686
   - Add info to support AD5673R and AD5677R
 * bosch,bmi088
   - New driver supporting this accelerometer + gyroscope
 * cros_ec_mkbp
   - New driver for this proximity sensor that exposes a 'front'
     sensor. Very simple switch like device, but driver allows it
     to share interface with more sophisticated proximity sensors.
 * iio_scmi
   - New driver to support ARM SCMI protocol to expose underlying
     accelerometers and gyroscopes via this firmware interface.
 * st,st_magn
   - Add ID for IISMDC magnetometer.
 * ti,ads131e0
   - New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs
 
 Counter New Device Support
 * IRQ or GPIO based counter
   - New driver for a conceptually simple counter that uses interrupts
     to perform the count.
 
 Features
 * core
   - Dual buffer supprt including:
      Various helpers to centralize handling of bufferer related elements.
      Document existing and new IOCTLs
      Register the IIO chrdev only if it can actually be used for anything.
      Rework attribute group creation in the core (lots of patches)
      Merge buffer/ and scan_elements/ entries into one list + maintain
      backwards compatible set.
      Introduce the internal logic and IOCTL to allow multiple buffers
      + access to an anon FD per buffer to actually read from it.
      Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
      Update ABI docs.
      A few follow up fixes, unsuprising as this was a huge bit of rework.
   - Move common case setting of trig->parent to the core.
   - Provide an iio_read_channel_processed_scale() to avoid loss of
     precision from iio_read_channel_processed() then applying integer
     scale. Use it in ntc_thermistor driver in hwmon.
   - Allow drivers to specify labels from elsewhere than DT. Use it for
     bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
   - Document label usage for proximity and accelerometer sensors.
   - Some local variable renames for consistency
 tools
   - Add -a parameter to iio_event_monitor to allow autoenabling of events.
 * acpi_als
   - Add trigger support for devices that don't support notification method.
 * adi,ad7124
   - Allow more than 8 channels.  This is a complex little device, but is
     capable of supporting up to 16 channels if the share certain
     configuration settings.
 * hrtimer-trigger
   - Support sampling frequency below 1Hz.
 * mediatek,mt8195-auxadc
   - Add compatible to binding docs (always also includes mt8173)
 * st,stm32-adc
   - Enable timetamps when not using DMA.
 * vishay,vcnl3020
   - Sampling frequency control.
 
 Cleanup and minor fixes:
 * treewide
   - Use some getter and setter functions instead of opencoding.
   - Set of fixes for pointless casts in various drivers.
   - Avoid wrong kernel-doc marking on comment blocks.
   - Fix various other minor kernel-doc issues shown by W=1
 * core
   - Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
   - Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
   - Add unit tests for iio_format_value()
 * docs
   - Fix formatting/typos in iio_configfs.rst and buffers.rst
   - Add documentation of index in buffers.rst
   - Fix scan element description
   - Avoid some issues with HTML generation from ABI docs by moving
     duplicated defintions to more generic files.
   - Drop reference to long dead mailing list.
 * 104-quad
   - Remove left over deprecated IIO counter ABI.
 * adi,adi-axi-adc
   - Fix wrong bit of docs.
 * adi,ad5791
   - Typos
 * adi,ad9834
    - Switch to device managed functions in probe.
 * adi,adis*
   - Add and use helpers for locking to reduced duplication.
 * adi,adis16480
   - Fix calculation of sampling frequency when using pulse per second input.
 * adi,adis16475
   - Calculate the IMU scaled internal sampling rate and runtime depending
     on sysfs based configuration rather than getting from DT. Drop now
     unnecessary property from DT bindings doc.
 * cros_ec
    - Fix result of a series of recent changes that means extended buffer
      attributes turn up in the wrong place. Too complex to revert the
      various patches unfortunately so this is a bit messy.
 * fsl,mma3452
   - Indentation cleanup.
 * hid-sensors
   - Size of storage needs to increase for some parts when using quaternions.
   - Move the get sensistivity attribute to hid-sensors-common to reduce
     duplication.  Enable it for more device types.
   - Correctly handle relative sensitivity if reported that way including
     documenting the new ABI.
 * maxim,max517
   - Use device managed functions in probe.
 * mediatek,mt6360-adc
   - Use asm/unaligned.h instead of directly including
     unaligned/be_byteshift.h
 * novuton,npcm-adc
   - Local lock instead of missusing mlock.
 * semtech,sx9500
   - Typos
 * st,sensor
   - typo fix
 * st,spear-adc
   - Local lock instead of missusing mlock.
 * st,stm32-adc
   - Long standing HAS_IOMEM dependency fix.
 * st,stm32-counter
   - Remove left over deprecated IIO counter ABI.
 * ti,palmas-adc
   - Local lock instead of missusing mlock.
 * ti,tmp007
   - Switch to device managed functions in probe.
 
 Other
 * MAINTAINERS
   - Move Peter Meerwald-Stadler to Credits at his request
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmBdtl4RHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0FogEhxAAuTWrEwun8rE5fQkQIlEkKYwZqEgUln4Q
 tLKhrqeyfGcY/A1aX/HTpnn0TOtaOkUqRzLWsAW0thZih1u7yEL6Vc55KKh5WGL7
 CvcvLWAkorsTjbtusgrBgFmjuoAMjW892Q+bbh1CJ/0qlezhFE9jrmJfmH2klI/p
 nIoJsdyCE98+4oIdcOCxwJe7nTDDHP8BCF7WnKtHCLtn3T9Dzttises3T6HfKxlg
 cdu3cy2N+pQpakYpv96tvjBGI9Ho3FX8R+dILUxJpVwCcLUjf8b1CFcgboJwxou2
 tgPNwWToxd9OTYJa7EOsDaFPZD46NRProkUBGKgA58XPkhqSvLcSdvGokFPgKnPW
 NorymGaUOC2qolH91nuFaWrd6c6hIf5NeWtGDo1GHJdcSgu21C0OdaU3K72EGhsB
 YLnl0Wp8Bthwn7KS0Ck4TqUPN3D3Q9NCEz7sAUzqc3QBzm4U+dXVzCwRehI7hPdw
 YlORAzbV1o7Z0skhAAth+NAYUUB6GywGZLaUi5oXWoJSYhNvI1K1uiHVVStVINWl
 L7uor5FXTr4/czjrutWQbw7GQ0cfCODH6B1cbS9vNaDQ6wO9XGSaWgc3mK9Lgsqc
 Y1ekYvXNSxKJw42FWvr4ylkeF7BV6h0oBFB4DLlZppYi1pKZb8oPsED8UpBrFnG1
 uPqjNX9Tsqw=
 =jeRJ
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

1st set of IIO/counter device support, features and cleanup in the 5.13 cycle

Big set in here from Alexandru Ardelean enabling multiple buffer support.
This includes providing a new directory per buffer that combines
what was previously in buffer/ and scan_elements/. Old interfaces still
in place for compatiblity.

Note immuatable branch for scmi patches to allow for some significant
rework going on in that subsystem.  Merge required updating to reflect
some changes in IIO.

Late rebase to fix some wrong fixes tags due to some earlier rebases
made necessary by messing up the immutable branch.

IIO New Device Support
* adi,ad5686
  - Add info to support AD5673R and AD5677R
* bosch,bmi088
  - New driver supporting this accelerometer + gyroscope
* cros_ec_mkbp
  - New driver for this proximity sensor that exposes a 'front'
    sensor. Very simple switch like device, but driver allows it
    to share interface with more sophisticated proximity sensors.
* iio_scmi
  - New driver to support ARM SCMI protocol to expose underlying
    accelerometers and gyroscopes via this firmware interface.
* st,st_magn
  - Add ID for IISMDC magnetometer.
* ti,ads131e0
  - New driver supporting ads131e04, ads131e06 and ads131e08 24 bit ADCs

Counter New Device Support
* IRQ or GPIO based counter
  - New driver for a conceptually simple counter that uses interrupts
    to perform the count.

Features
* core
  - Dual buffer supprt including:
     Various helpers to centralize handling of bufferer related elements.
     Document existing and new IOCTLs
     Register the IIO chrdev only if it can actually be used for anything.
     Rework attribute group creation in the core (lots of patches)
     Merge buffer/ and scan_elements/ entries into one list + maintain
     backwards compatible set.
     Introduce the internal logic and IOCTL to allow multiple buffers
     + access to an anon FD per buffer to actually read from it.
     Tidy up tools/iio/iio_generic_buffer and switch to new interfaces.
     Update ABI docs.
     A few follow up fixes, unsuprising as this was a huge bit of rework.
  - Move common case setting of trig->parent to the core.
  - Provide an iio_read_channel_processed_scale() to avoid loss of
    precision from iio_read_channel_processed() then applying integer
    scale. Use it in ntc_thermistor driver in hwmon.
  - Allow drivers to specify labels from elsewhere than DT. Use it for
    bmc150 and kxcjk-1013 labels related to position on 2 in one tablets.
  - Document label usage for proximity and accelerometer sensors.
  - Some local variable renames for consistency
tools
  - Add -a parameter to iio_event_monitor to allow autoenabling of events.
* acpi_als
  - Add trigger support for devices that don't support notification method.
* adi,ad7124
  - Allow more than 8 channels.  This is a complex little device, but is
    capable of supporting up to 16 channels if the share certain
    configuration settings.
* hrtimer-trigger
  - Support sampling frequency below 1Hz.
* mediatek,mt8195-auxadc
  - Add compatible to binding docs (always also includes mt8173)
* st,stm32-adc
  - Enable timetamps when not using DMA.
* vishay,vcnl3020
  - Sampling frequency control.

Cleanup and minor fixes:
* treewide
  - Use some getter and setter functions instead of opencoding.
  - Set of fixes for pointless casts in various drivers.
  - Avoid wrong kernel-doc marking on comment blocks.
  - Fix various other minor kernel-doc issues shown by W=1
* core
  - Use a signed temporary for IIO_VAL_FRACTIONAL_LOG2 to avoid odd casts.
  - Fix IIO_VAL_FRACTIONAL_LOG2 for values between -1.0 and 0.0
  - Add unit tests for iio_format_value()
* docs
  - Fix formatting/typos in iio_configfs.rst and buffers.rst
  - Add documentation of index in buffers.rst
  - Fix scan element description
  - Avoid some issues with HTML generation from ABI docs by moving
    duplicated defintions to more generic files.
  - Drop reference to long dead mailing list.
* 104-quad
  - Remove left over deprecated IIO counter ABI.
* adi,adi-axi-adc
  - Fix wrong bit of docs.
* adi,ad5791
  - Typos
* adi,ad9834
   - Switch to device managed functions in probe.
* adi,adis*
  - Add and use helpers for locking to reduced duplication.
* adi,adis16480
  - Fix calculation of sampling frequency when using pulse per second input.
* adi,adis16475
  - Calculate the IMU scaled internal sampling rate and runtime depending
    on sysfs based configuration rather than getting from DT. Drop now
    unnecessary property from DT bindings doc.
* cros_ec
   - Fix result of a series of recent changes that means extended buffer
     attributes turn up in the wrong place. Too complex to revert the
     various patches unfortunately so this is a bit messy.
* fsl,mma3452
  - Indentation cleanup.
* hid-sensors
  - Size of storage needs to increase for some parts when using quaternions.
  - Move the get sensistivity attribute to hid-sensors-common to reduce
    duplication.  Enable it for more device types.
  - Correctly handle relative sensitivity if reported that way including
    documenting the new ABI.
* maxim,max517
  - Use device managed functions in probe.
* mediatek,mt6360-adc
  - Use asm/unaligned.h instead of directly including
    unaligned/be_byteshift.h
* novuton,npcm-adc
  - Local lock instead of missusing mlock.
* semtech,sx9500
  - Typos
* st,sensor
  - typo fix
* st,spear-adc
  - Local lock instead of missusing mlock.
* st,stm32-adc
  - Long standing HAS_IOMEM dependency fix.
* st,stm32-counter
  - Remove left over deprecated IIO counter ABI.
* ti,palmas-adc
  - Local lock instead of missusing mlock.
* ti,tmp007
  - Switch to device managed functions in probe.

Other
* MAINTAINERS
  - Move Peter Meerwald-Stadler to Credits at his request

* tag 'iio-for-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (119 commits)
  iio: acpi_als: Add trigger support
  iio: acpi_als: Add local variable dev in probe
  iio: acpi_als: Add timestamp channel
  iio: adc: ad7292: Modify the bool initialization assignment
  iio: cros: unify hw fifo attributes without API changes
  iio: kfifo: add devm_iio_triggered_buffer_setup_ext variant
  iio: event_monitor: Enable events before monitoring
  dt-bindings: iio: adc: Add compatible for Mediatek MT8195
  iio:magnetometer: Add Support for ST IIS2MDC
  dt-bindings: iio: st,st-sensors add IIS2MDC.
  staging: iio: ad9832: kernel-doc fixes
  iio:dac:max517.c: Use devm_iio_device_register()
  iio:cros_ec_sensors: Fix a wrong function name in kernel doc.
  iio: buffer: kfifo_buf: kernel-doc, typo in function name.
  iio: accel: sca3000: kernel-doc fixes. Missing - and wrong function names.
  iio: adc: adi-axi-adc: Drop false marking for kernel-doc
  iio: adc: cpcap-adc: kernel-doc fix - that should be _ in structure name
  iio: dac: ad5504: fix wrong part number in kernel-doc structure name.
  iio: dac: ad5770r: kernel-doc fix case of letter R wrong in structure name
  iio: adc: ti-adc084s021: kernel-doc fixes, missing function names
  ...
2021-03-26 12:09:47 +01:00
..
arm_scmi iio/scmi: Adding support for IIO SCMI Based Sensors 2021-03-13 16:43:04 +00:00
broadcom firmware: bcm47xx_sprom: Fix -Wmissing-prototypes warnings 2020-08-17 13:47:28 +02:00
efi Another couple of EFI fixes for v5.12-rc: 2021-03-19 14:23:46 +01:00
google firmware: google: make coreboot driver's remove callback return void 2021-02-09 12:12:43 +01:00
imx firmware: imx: select SOC_BUS to fix firmware build 2021-01-18 15:49:07 +08:00
meson firmware: meson-sm: enable build as module 2020-10-26 13:36:05 -07:00
psci psci: Add accessor for psci_0_1_function_ids 2020-12-04 08:44:24 +00:00
smccc firmware: smccc: Introduce SMCCC TRNG framework 2021-01-21 17:42:46 +00:00
tegra firmware: tegra: fix strncpy()/strncat() confusion 2020-11-10 20:15:17 +01:00
xilinx ARM: SoC drivers for v5.11 2020-12-16 16:38:41 -08:00
Kconfig firmware: fix a spelling mistake "managament" -> "management" in Kconfig 2020-12-09 15:42:19 +01:00
Makefile firmware: arm_scmi: Enable building as a single module 2020-09-14 07:31:03 +01:00
arm_scpi.c firmware: arm_scpi: Replace zero-length array with flexible-array member 2020-02-20 17:13:59 +00:00
arm_sdei.c arm64: sdei: move uaccess logic to arch/arm64/ 2020-12-02 19:46:14 +00:00
dmi-id.c firmware/dmi: Report DMI Bios & EC firmware release 2020-06-06 11:35:50 +02:00
dmi-sysfs.c firmware: dmi-sysfs: Replace zero-length array with flexible-array member 2020-06-15 23:08:04 -05:00
dmi_scan.c Replace HTTP links with HTTPS ones: DMI/SMBIOS SUPPORT 2020-07-16 11:46:24 +02:00
edd.c edd: Use scnprintf() for avoiding potential buffer overflow 2020-04-02 20:42:29 +02:00
iscsi_ibft.c ibft: Replace zero-length array with flexible-array 2020-06-15 23:08:31 -05:00
iscsi_ibft_find.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287 2019-06-05 17:36:37 +02:00
memmap.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 287 2019-06-05 17:36:37 +02:00
pcdp.c efi/ia64: Move HCDP and MPS table handling into IA64 arch code 2020-02-23 21:59:42 +01:00
pcdp.h firmware: pcdp: Replace zero-length array with flexible-array 2020-06-15 23:08:32 -05:00
qcom_scm-legacy.c firmware: qcom_scm-legacy: Replace zero-length array with flexible-array 2020-05-12 15:16:33 -07:00
qcom_scm-smc.c firmware: qcom_scm: Dynamically support SMCCC and legacy conventions 2020-01-07 22:14:43 -08:00
qcom_scm.c firmware: qcom_scm: update comment for ICE-related functions 2021-02-01 12:02:33 +01:00
qcom_scm.h media: firmware: qcom_scm: Add memory protect virtual address ranges 2020-09-14 15:45:25 +02:00
qemu_fw_cfg.c fw_cfg: Add support for parisc architecture 2020-10-15 08:10:37 +02:00
raspberrypi.c firmware: fix spelling typo of 'wtih' 2020-11-14 00:23:55 +01:00
scpi_pm_domain.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201 2019-05-30 11:29:52 -07:00
stratix10-rsu.c firmware: stratix10-rsu: fix warnings 2020-07-02 14:48:48 +02:00
stratix10-svc.c firmware: stratix10-svc: extend svc to support new RSU features 2020-07-02 14:48:48 +02:00
ti_sci.c firmware: ti_sci: rm: Remove unused config() from ti_sci_rm_ringacc_ops 2020-11-01 19:38:04 -08:00
ti_sci.h firmware: ti_sci: rm: Add new ops for ring configuration 2020-11-01 19:38:02 -08:00
trusted_foundations.c firmware: tf: Different way of L2 cache enabling after LP2 suspend 2020-05-06 18:27:26 +02:00
turris-mox-rwtm.c firmware: turris-mox-rwtm: support ECDSA signatures via debugfs 2020-07-18 22:35:01 +02:00