389 lines
9.9 KiB
C
389 lines
9.9 KiB
C
/*
|
|
* Freescale eSDHC controller driver.
|
|
*
|
|
* Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
|
|
* Copyright (c) 2009 MontaVista Software, Inc.
|
|
*
|
|
* Authors: Xiaobo Xie <X.Xie@freescale.com>
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/of.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mmc/host.h>
|
|
#include "sdhci-pltfm.h"
|
|
#include "sdhci-esdhc.h"
|
|
|
|
#define VENDOR_V_22 0x12
|
|
#define VENDOR_V_23 0x13
|
|
static u32 esdhc_readl(struct sdhci_host *host, int reg)
|
|
{
|
|
u32 ret;
|
|
|
|
ret = in_be32(host->ioaddr + reg);
|
|
/*
|
|
* The bit of ADMA flag in eSDHC is not compatible with standard
|
|
* SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
|
|
* supported by eSDHC.
|
|
* And for many FSL eSDHC controller, the reset value of field
|
|
* SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
|
|
* only these vendor version is greater than 2.2/0x12 support ADMA.
|
|
* For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
|
|
* the verdor version number, oxFE is SDHCI_HOST_VERSION.
|
|
*/
|
|
if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
|
|
u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
|
|
tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
|
|
if (tmp > VENDOR_V_22)
|
|
ret |= SDHCI_CAN_DO_ADMA2;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static u16 esdhc_readw(struct sdhci_host *host, int reg)
|
|
{
|
|
u16 ret;
|
|
int base = reg & ~0x3;
|
|
int shift = (reg & 0x2) * 8;
|
|
|
|
if (unlikely(reg == SDHCI_HOST_VERSION))
|
|
ret = in_be32(host->ioaddr + base) & 0xffff;
|
|
else
|
|
ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
|
|
return ret;
|
|
}
|
|
|
|
static u8 esdhc_readb(struct sdhci_host *host, int reg)
|
|
{
|
|
int base = reg & ~0x3;
|
|
int shift = (reg & 0x3) * 8;
|
|
u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
|
|
|
|
/*
|
|
* "DMA select" locates at offset 0x28 in SD specification, but on
|
|
* P5020 or P3041, it locates at 0x29.
|
|
*/
|
|
if (reg == SDHCI_HOST_CONTROL) {
|
|
u32 dma_bits;
|
|
|
|
dma_bits = in_be32(host->ioaddr + reg);
|
|
/* DMA select is 22,23 bits in Protocol Control Register */
|
|
dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
|
|
|
|
/* fixup the result */
|
|
ret &= ~SDHCI_CTRL_DMA_MASK;
|
|
ret |= dma_bits;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
|
|
{
|
|
/*
|
|
* Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
|
|
* when SYSCTL[RSTD]) is set for some special operations.
|
|
* No any impact other operation.
|
|
*/
|
|
if (reg == SDHCI_INT_ENABLE)
|
|
val |= SDHCI_INT_BLK_GAP;
|
|
sdhci_be32bs_writel(host, val, reg);
|
|
}
|
|
|
|
static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
|
|
{
|
|
if (reg == SDHCI_BLOCK_SIZE) {
|
|
/*
|
|
* Two last DMA bits are reserved, and first one is used for
|
|
* non-standard blksz of 4096 bytes that we don't support
|
|
* yet. So clear the DMA boundary bits.
|
|
*/
|
|
val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
|
|
}
|
|
sdhci_be32bs_writew(host, val, reg);
|
|
}
|
|
|
|
static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
|
|
{
|
|
/*
|
|
* "DMA select" location is offset 0x28 in SD specification, but on
|
|
* P5020 or P3041, it's located at 0x29.
|
|
*/
|
|
if (reg == SDHCI_HOST_CONTROL) {
|
|
u32 dma_bits;
|
|
|
|
/*
|
|
* If host control register is not standard, exit
|
|
* this function
|
|
*/
|
|
if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
|
|
return;
|
|
|
|
/* DMA select is 22,23 bits in Protocol Control Register */
|
|
dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
|
|
clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
|
|
dma_bits);
|
|
val &= ~SDHCI_CTRL_DMA_MASK;
|
|
val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
|
|
}
|
|
|
|
/* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
|
|
if (reg == SDHCI_HOST_CONTROL)
|
|
val &= ~ESDHC_HOST_CONTROL_RES;
|
|
sdhci_be32bs_writeb(host, val, reg);
|
|
}
|
|
|
|
/*
|
|
* For Abort or Suspend after Stop at Block Gap, ignore the ADMA
|
|
* error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
|
|
* and Block Gap Event(IRQSTAT[BGE]) are also set.
|
|
* For Continue, apply soft reset for data(SYSCTL[RSTD]);
|
|
* and re-issue the entire read transaction from beginning.
|
|
*/
|
|
static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
|
|
{
|
|
u32 tmp;
|
|
bool applicable;
|
|
dma_addr_t dmastart;
|
|
dma_addr_t dmanow;
|
|
|
|
tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
|
|
tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
|
|
|
|
applicable = (intmask & SDHCI_INT_DATA_END) &&
|
|
(intmask & SDHCI_INT_BLK_GAP) &&
|
|
(tmp == VENDOR_V_23);
|
|
if (!applicable)
|
|
return;
|
|
|
|
host->data->error = 0;
|
|
dmastart = sg_dma_address(host->data->sg);
|
|
dmanow = dmastart + host->data->bytes_xfered;
|
|
/*
|
|
* Force update to the next DMA block boundary.
|
|
*/
|
|
dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
|
|
SDHCI_DEFAULT_BOUNDARY_SIZE;
|
|
host->data->bytes_xfered = dmanow - dmastart;
|
|
sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
|
|
}
|
|
|
|
static int esdhc_of_enable_dma(struct sdhci_host *host)
|
|
{
|
|
setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return pltfm_host->clock;
|
|
}
|
|
|
|
static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
|
|
{
|
|
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
|
|
|
|
return pltfm_host->clock / 256 / 16;
|
|
}
|
|
|
|
static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
|
|
{
|
|
|
|
int pre_div = 2;
|
|
int div = 1;
|
|
u32 temp;
|
|
|
|
if (clock == 0)
|
|
goto out;
|
|
|
|
/* Workaround to reduce the clock frequency for p1010 esdhc */
|
|
if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
|
|
if (clock > 20000000)
|
|
clock -= 5000000;
|
|
if (clock > 40000000)
|
|
clock -= 5000000;
|
|
}
|
|
|
|
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
|
|
temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
|
|
| ESDHC_CLOCK_MASK);
|
|
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
|
|
|
|
while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
|
|
pre_div *= 2;
|
|
|
|
while (host->max_clk / pre_div / div > clock && div < 16)
|
|
div++;
|
|
|
|
dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
|
|
clock, host->max_clk / pre_div / div);
|
|
|
|
pre_div >>= 1;
|
|
div--;
|
|
|
|
temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
|
|
temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
|
|
| (div << ESDHC_DIVIDER_SHIFT)
|
|
| (pre_div << ESDHC_PREDIV_SHIFT));
|
|
sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
|
|
mdelay(1);
|
|
out:
|
|
host->clock = clock;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static u32 esdhc_proctl;
|
|
static void esdhc_of_suspend(struct sdhci_host *host)
|
|
{
|
|
esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
|
|
}
|
|
|
|
static void esdhc_of_resume(struct sdhci_host *host)
|
|
{
|
|
esdhc_of_enable_dma(host);
|
|
sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
|
|
}
|
|
#endif
|
|
|
|
static void esdhc_of_platform_init(struct sdhci_host *host)
|
|
{
|
|
u32 vvn;
|
|
|
|
vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
|
|
vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
|
|
if (vvn == VENDOR_V_22)
|
|
host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
|
|
|
|
if (vvn > VENDOR_V_22)
|
|
host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
|
|
}
|
|
|
|
static int esdhc_pltfm_bus_width(struct sdhci_host *host, int width)
|
|
{
|
|
u32 ctrl;
|
|
|
|
switch (width) {
|
|
case MMC_BUS_WIDTH_8:
|
|
ctrl = ESDHC_CTRL_8BITBUS;
|
|
break;
|
|
|
|
case MMC_BUS_WIDTH_4:
|
|
ctrl = ESDHC_CTRL_4BITBUS;
|
|
break;
|
|
|
|
default:
|
|
ctrl = 0;
|
|
break;
|
|
}
|
|
|
|
clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
|
|
ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct sdhci_ops sdhci_esdhc_ops = {
|
|
.read_l = esdhc_readl,
|
|
.read_w = esdhc_readw,
|
|
.read_b = esdhc_readb,
|
|
.write_l = esdhc_writel,
|
|
.write_w = esdhc_writew,
|
|
.write_b = esdhc_writeb,
|
|
.set_clock = esdhc_of_set_clock,
|
|
.enable_dma = esdhc_of_enable_dma,
|
|
.get_max_clock = esdhc_of_get_max_clock,
|
|
.get_min_clock = esdhc_of_get_min_clock,
|
|
.platform_init = esdhc_of_platform_init,
|
|
#ifdef CONFIG_PM
|
|
.platform_suspend = esdhc_of_suspend,
|
|
.platform_resume = esdhc_of_resume,
|
|
#endif
|
|
.adma_workaround = esdhci_of_adma_workaround,
|
|
.platform_bus_width = esdhc_pltfm_bus_width,
|
|
};
|
|
|
|
static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
|
|
/*
|
|
* card detection could be handled via GPIO
|
|
* eSDHC cannot support End Attribute in NOP ADMA descriptor
|
|
*/
|
|
.quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
|
|
| SDHCI_QUIRK_NO_CARD_NO_RESET
|
|
| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
|
|
.ops = &sdhci_esdhc_ops,
|
|
};
|
|
|
|
static int sdhci_esdhc_probe(struct platform_device *pdev)
|
|
{
|
|
struct sdhci_host *host;
|
|
struct device_node *np;
|
|
int ret;
|
|
|
|
host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0);
|
|
if (IS_ERR(host))
|
|
return PTR_ERR(host);
|
|
|
|
sdhci_get_of_property(pdev);
|
|
|
|
np = pdev->dev.of_node;
|
|
if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
|
|
/*
|
|
* Freescale messed up with P2020 as it has a non-standard
|
|
* host control register
|
|
*/
|
|
host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
|
|
}
|
|
|
|
/* call to generic mmc_of_parse to support additional capabilities */
|
|
mmc_of_parse(host->mmc);
|
|
mmc_of_parse_voltage(np, &host->ocr_mask);
|
|
|
|
ret = sdhci_add_host(host);
|
|
if (ret)
|
|
sdhci_pltfm_free(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int sdhci_esdhc_remove(struct platform_device *pdev)
|
|
{
|
|
return sdhci_pltfm_unregister(pdev);
|
|
}
|
|
|
|
static const struct of_device_id sdhci_esdhc_of_match[] = {
|
|
{ .compatible = "fsl,mpc8379-esdhc" },
|
|
{ .compatible = "fsl,mpc8536-esdhc" },
|
|
{ .compatible = "fsl,esdhc" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
|
|
|
|
static struct platform_driver sdhci_esdhc_driver = {
|
|
.driver = {
|
|
.name = "sdhci-esdhc",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = sdhci_esdhc_of_match,
|
|
.pm = SDHCI_PLTFM_PMOPS,
|
|
},
|
|
.probe = sdhci_esdhc_probe,
|
|
.remove = sdhci_esdhc_remove,
|
|
};
|
|
|
|
module_platform_driver(sdhci_esdhc_driver);
|
|
|
|
MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
|
|
MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
|
|
"Anton Vorontsov <avorontsov@ru.mvista.com>");
|
|
MODULE_LICENSE("GPL v2");
|