OpenCloudOS-Kernel/drivers/usb
Johan Hovold 9be427efc7 Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
This reverts commit e3345db850, which
broke system resume for a large class of devices.

Devices that after having been reset during resume need to be rebound
due to a missing reset_resume callback, are now left in a suspended
state. This specifically broke resume of common USB-serial devices,
which are now unusable after system suspend (until disconnected and
reconnected) when USB persist is enabled.

During resume, usb_resume_interface will set the needs_binding flag for
such interfaces, but unlike system resume, run-time resume does not
honour it.

Cc: stable <stable@vger.kernel.org>	# 4.5
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-02 08:44:31 -07:00
..
atm USB: cxacru: fix an bounds check warning 2016-02-03 13:52:10 -08:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea USB patches for 4.6-rc1 2016-03-17 14:24:26 -07:00
class cdc-acm: fix crash if flushed with nothing buffered 2016-04-13 11:53:07 -07:00
common Merge branch 'akpm' (patches from Andrew) 2016-03-18 19:26:54 -07:00
core Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping" 2016-05-02 08:44:31 -07:00
dwc2 usb: dwc2: do not override forced dr_mode in gadget setup 2016-04-04 15:18:48 +03:00
dwc3 usb: dwc3: gadget: Fix suspend/resume during device mode 2016-04-18 12:35:18 +03:00
early
gadget usb: gadget: f_fs: Fix use-after-free 2016-04-20 10:38:06 +03:00
host usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value 2016-04-13 11:58:02 -07:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc USB: iowarrior: fix oops with malicious USB descriptors 2016-03-18 09:19:02 -07:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
musb usb: musb: jz4740: fix error check of usb_get_phy() 2016-04-26 14:50:02 -07:00
phy usb: phy: qcom-8x16: fix regulator API abuse 2016-03-30 13:34:04 +03:00
renesas_usbhs usb: renesas_usbhs: fix to avoid using a disabled ep in usbhsg_queue_done() 2016-04-04 15:18:48 +03:00
serial USB: serial: cp210x: add Straizona Focusers device ids 2016-04-24 11:19:06 +02:00
storage USB: uas: Add a new NO_REPORT_LUNS quirk 2016-04-13 12:02:28 -07:00
usbip USB: usbip: fix potential out-of-bounds write 2016-03-30 21:55:36 -07:00
wusbcore USB patches for 4.6-rc1 2016-03-17 14:24:26 -07:00
Kconfig
Makefile usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
README
usb-skeleton.c

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.