Bin Liu 9298b4aad3 usb: musb: fix device hotplug behind hub ... The commit 889ad3b "usb: musb: try a race-free wakeup" breaks device hotplug enumeraitonn when the device is connected behind a hub while usb autosuspend is enabled. Adding finish_resume_work into runtime resume callback fixes the issue. Also resume root hub is required to resume the bus from runtime suspend, so move musb_host_resume_root_hub() back to its original location, where handles RESUME interrupt. Signed-off-by: Bin Liu <b-liu@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Felipe Balbi <balbi@ti.com>		2015-02-04 11:16:47 -06:00
..
Kconfig	usb: musb: add omap-control dependency	2015-01-29 10:36:29 -06:00
Makefile	usb: musb: add support for JZ4740 usb device controller	2013-12-20 09:53:24 -06:00
am35x.c	usb: musb: Change end point selection to use new IO access	2014-11-25 08:47:06 -06:00
blackfin.c	usb: musb: blackfin: remove incorrect __exit_p()	2015-02-02 13:04:55 -06:00
blackfin.h	usb: musb: drop a gigantic amount of ifdeferry	2011-07-01 14:31:10 -07:00
cppi_dma.c	usb: musb: dma: merge ->start/stop into create/destroy	2013-07-29 13:53:18 +03:00
cppi_dma.h	…
da8xx.c	usb: musb: Pass fifo_mode in platform data	2014-11-25 08:47:07 -06:00
davinci.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
davinci.h	usb: musb: davinci: Fix build breakage	2012-06-04 18:29:42 +03:00
jz4740.c	usb: musb: Pass fifo_mode in platform data	2014-11-25 08:47:07 -06:00
musb_am335x.c	usb: musb: Fix panic upon musb_am335x module removal	2014-06-27 10:53:06 -05:00
musb_core.c	usb: musb: fix device hotplug behind hub	2015-02-04 11:16:47 -06:00
musb_core.h	usb: musb: Use IS_ENABLED for tusb6010	2014-11-25 08:47:07 -06:00
musb_cppi41.c	usb: musb: cppi41: improve rx channel abort routine	2015-01-27 09:34:58 -06:00
musb_debug.h	usb: musb: remove extern qualifier from musb_debug.h header	2011-12-21 13:21:02 +02:00
musb_debugfs.c	Linux 3.19-rc5	2015-01-19 09:57:20 -06:00
musb_dma.h	usb: musb: introduce dma_channel.rx_packet_done	2014-06-30 14:26:24 -05:00
musb_dsps.c	usb: musb: Change end point selection to use new IO access	2014-11-25 08:47:06 -06:00
musb_gadget.c	usb: musb: gadget: use common is_selfpowered	2015-01-29 10:35:43 -06:00
musb_gadget.h	usb: musb: add Kconfig options for HOST, GAGDET or DUAL_ROLE modes	2013-05-28 19:22:23 +03:00
musb_gadget_ep0.c	usb: musb: gadget: use common is_selfpowered	2015-01-29 10:35:43 -06:00
musb_host.c	usb: musb: stuff leak of struct usb_hcd	2014-12-22 10:36:24 -06:00
musb_host.h	usb: musb: fix prototype for musb_port_reset	2013-12-20 15:05:43 -06:00
musb_io.h	usb: musb: Change end point selection to use new IO access	2014-11-25 08:47:06 -06:00
musb_regs.h	usb: musb: Use IS_ENABLED for tusb6010	2014-11-25 08:47:07 -06:00
musb_virthub.c	usb: musb: fix device hotplug behind hub	2015-02-04 11:16:47 -06:00
musbhsdma.c	usb: musb: Change end point selection to use new IO access	2014-11-25 08:47:06 -06:00
musbhsdma.h	usb: musb: remove generic_interrupt	2012-11-06 15:32:13 +02:00
omap2430.c	usb: move the OTG state from the USB PHY to the OTG structure	2014-11-03 10:01:25 -06:00
omap2430.h	usb: start using the control module driver	2013-01-25 12:27:24 +02:00
tusb6010.c	usb: musb: Change end point selection to use new IO access	2014-11-25 08:47:06 -06:00
tusb6010.h	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
tusb6010_omap.c	usb: musb: tusb6010: Use musb->tusb_revision instead of tusb_get_revision call.	2014-05-16 12:16:31 -05:00
ux500.c	usb: musb: Pass fifo_mode in platform data	2014-11-25 08:47:07 -06:00
ux500_dma.c	usb: musb: Change to use new IO access	2014-11-25 08:47:06 -06:00