OpenCloudOS-Kernel/drivers/usb
Andrew Morton f78ba15705 revert "keyspan: init termios properly"
Revert 7eea436433.

Lucy said:

  This patch will work with the 19HS but WILL BREAK all other Keyspan
  adapters.  It will take me a few days to get to looking at a correct fix but
  that keyspan_send_setup(port, 1) (and the '1' is the important part) must
  happen once when the port is first opened.  The cflag can just be set to
  whatever the normal default is for your serial environment.

So revert this again pending the proper fix.

Cc: Borislav Petkov <bbpetkov@yahoo.de>
Cc: Greg KH <greg@kroah.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Lucy McCoy <lucy@keyspan.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-11-29 09:24:54 -08:00
..
atm signedness: module_param_array nump argument 2007-10-14 12:41:52 -07:00
class Add missing newlines to some uses of dev_<level> messages 2007-10-18 14:37:28 -07:00
core USB: uevent environment key fix 2007-11-28 13:58:35 -08:00
gadget USB: s3c2410 gadget: ensure vbus pin in input mode during read 2007-11-28 13:58:36 -08:00
host USB: fix up EHCI startup synchronization 2007-11-28 13:58:36 -08:00
image USB: make the microtek driver and HAL cooperate 2007-11-28 13:58:35 -08:00
misc USB: FIx locks and urb->status in adutux (updated) 2007-11-28 13:58:34 -08:00
mon Slab API: remove useless ctor parameter and reorder parameters 2007-10-17 08:42:45 -07:00
serial revert "keyspan: init termios properly" 2007-11-29 09:24:54 -08:00
storage USB: usb-storage: unusual_devs entry for JetFlash TS1GJF2A 2007-11-28 13:58:36 -08:00
Kconfig usb: Enable hcd support on SH unconditionally. 2007-08-22 14:27:45 -07:00
Makefile USB: always visit drivers/usb/misc/ 2007-10-12 14:55:26 -07:00
README USB: fix directory references in usb/README 2007-11-28 13:58:34 -08:00
usb-skeleton.c USB: usb-skeleton leaking locks on open 2007-10-12 14:55:26 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.