UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/usb/dwc3/dwc3-meson-g12a.c

986 lines
26 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* USB Glue for Amlogic G12A SoCs
*
* Copyright (c) 2019 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
*/
/*
* The USB is organized with a glue around the DWC3 Controller IP as :
* - Control registers for each USB2 Ports
* - Control registers for the USB PHY layer
* - SuperSpeed PHY can be enabled only if port is used
* - Dynamic OTG switching with ID change interrupt
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/bitfield.h>
#include <linux/bitops.h>
#include <linux/reset.h>
#include <linux/phy/phy.h>
#include <linux/usb/otg.h>
#include <linux/usb/role.h>
#include <linux/regulator/consumer.h>
/* USB2 Ports Control Registers, offsets are per-port */
#define U2P_REG_SIZE 0x20
#define U2P_R0 0x0
#define U2P_R0_HOST_DEVICE BIT(0)
#define U2P_R0_POWER_OK BIT(1)
#define U2P_R0_HAST_MODE BIT(2)
#define U2P_R0_POWER_ON_RESET BIT(3)
#define U2P_R0_ID_PULLUP BIT(4)
#define U2P_R0_DRV_VBUS BIT(5)
#define U2P_R1 0x4
#define U2P_R1_PHY_READY BIT(0)
#define U2P_R1_ID_DIG BIT(1)
#define U2P_R1_OTG_SESSION_VALID BIT(2)
#define U2P_R1_VBUS_VALID BIT(3)
/* USB Glue Control Registers */
#define G12A_GLUE_OFFSET 0x80
#define USB_R0 0x00
#define USB_R0_P30_LANE0_TX2RX_LOOPBACK BIT(17)
#define USB_R0_P30_LANE0_EXT_PCLK_REQ BIT(18)
#define USB_R0_P30_PCS_RX_LOS_MASK_VAL_MASK GENMASK(28, 19)
#define USB_R0_U2D_SS_SCALEDOWN_MODE_MASK GENMASK(30, 29)
#define USB_R0_U2D_ACT BIT(31)
#define USB_R1 0x04
#define USB_R1_U3H_BIGENDIAN_GS BIT(0)
#define USB_R1_U3H_PME_ENABLE BIT(1)
#define USB_R1_U3H_HUB_PORT_OVERCURRENT_MASK GENMASK(4, 2)
#define USB_R1_U3H_HUB_PORT_PERM_ATTACH_MASK GENMASK(9, 7)
#define USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK GENMASK(13, 12)
#define USB_R1_U3H_HOST_U3_PORT_DISABLE BIT(16)
#define USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT BIT(17)
#define USB_R1_U3H_HOST_MSI_ENABLE BIT(18)
#define USB_R1_U3H_FLADJ_30MHZ_REG_MASK GENMASK(24, 19)
#define USB_R1_P30_PCS_TX_SWING_FULL_MASK GENMASK(31, 25)
#define USB_R2 0x08
#define USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(25, 20)
#define USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK GENMASK(31, 26)
#define USB_R3 0x0c
#define USB_R3_P30_SSC_ENABLE BIT(0)
#define USB_R3_P30_SSC_RANGE_MASK GENMASK(3, 1)
#define USB_R3_P30_SSC_REF_CLK_SEL_MASK GENMASK(12, 4)
#define USB_R3_P30_REF_SSP_EN BIT(13)
#define USB_R4 0x10
#define USB_R4_P21_PORT_RESET_0 BIT(0)
#define USB_R4_P21_SLEEP_M0 BIT(1)
#define USB_R4_MEM_PD_MASK GENMASK(3, 2)
#define USB_R4_P21_ONLY BIT(4)
#define USB_R5 0x14
#define USB_R5_ID_DIG_SYNC BIT(0)
#define USB_R5_ID_DIG_REG BIT(1)
#define USB_R5_ID_DIG_CFG_MASK GENMASK(3, 2)
#define USB_R5_ID_DIG_EN_0 BIT(4)
#define USB_R5_ID_DIG_EN_1 BIT(5)
#define USB_R5_ID_DIG_CURR BIT(6)
#define USB_R5_ID_DIG_IRQ BIT(7)
#define USB_R5_ID_DIG_TH_MASK GENMASK(15, 8)
#define USB_R5_ID_DIG_CNT_MASK GENMASK(23, 16)
#define PHY_COUNT 3
#define USB2_OTG_PHY 1
static struct clk_bulk_data meson_gxl_clocks[] = {
{ .id = "usb_ctrl" },
{ .id = "ddr" },
};
static struct clk_bulk_data meson_g12a_clocks[] = {
{ .id = NULL },
};
static struct clk_bulk_data meson_a1_clocks[] = {
{ .id = "usb_ctrl" },
{ .id = "usb_bus" },
{ .id = "xtal_usb_ctrl" },
};
static const char * const meson_gxm_phy_names[] = {
"usb2-phy0", "usb2-phy1", "usb2-phy2",
};
static const char * const meson_g12a_phy_names[] = {
"usb2-phy0", "usb2-phy1", "usb3-phy0",
};
/*
* Amlogic A1 has a single physical PHY, in slot 1, but still has the
* two U2 PHY controls register blocks like G12A.
* AXG has the similar scheme, thus needs the same tweak.
* Handling the first PHY on slot 1 would need a large amount of code
* changes, and the current management is generic enough to handle it
* correctly when only the "usb2-phy1" phy is specified on-par with the
* DT bindings.
*/
static const char * const meson_a1_phy_names[] = {
"usb2-phy0", "usb2-phy1"
};
struct dwc3_meson_g12a;
struct dwc3_meson_g12a_drvdata {
bool otg_switch_supported;
bool otg_phy_host_port_disable;
struct clk_bulk_data *clks;
int num_clks;
const char * const *phy_names;
int num_phys;
int (*setup_regmaps)(struct dwc3_meson_g12a *priv, void __iomem *base);
int (*usb2_init_phy)(struct dwc3_meson_g12a *priv, int i,
enum phy_mode mode);
int (*set_phy_mode)(struct dwc3_meson_g12a *priv, int i,
enum phy_mode mode);
int (*usb_init)(struct dwc3_meson_g12a *priv);
int (*usb_post_init)(struct dwc3_meson_g12a *priv);
};
static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv,
void __iomem *base);
static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
void __iomem *base);
static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
enum phy_mode mode);
static int dwc3_meson_gxl_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
enum phy_mode mode);
static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
int i, enum phy_mode mode);
static int dwc3_meson_gxl_set_phy_mode(struct dwc3_meson_g12a *priv,
int i, enum phy_mode mode);
static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv);
static int dwc3_meson_gxl_usb_init(struct dwc3_meson_g12a *priv);
static int dwc3_meson_gxl_usb_post_init(struct dwc3_meson_g12a *priv);
/*
* For GXL and GXM SoCs:
* USB Phy muxing between the DWC2 Device controller and the DWC3 Host
* controller is buggy when switching from Device to Host when USB port
* is unpopulated, it causes the DWC3 to hard crash.
* When populated (including OTG switching with ID pin), the switch works
* like a charm like on the G12A platforms.
* In order to still switch from Host to Device on an USB Type-A port,
* an U2_PORT_DISABLE bit has been added to disconnect the DWC3 Host
* controller from the port, but when used the DWC3 controller must be
* reset to recover usage of the port.
*/
static const struct dwc3_meson_g12a_drvdata gxl_drvdata = {
.otg_switch_supported = true,
.otg_phy_host_port_disable = true,
.clks = meson_gxl_clocks,
.num_clks = ARRAY_SIZE(meson_g12a_clocks),
.phy_names = meson_a1_phy_names,
.num_phys = ARRAY_SIZE(meson_a1_phy_names),
.setup_regmaps = dwc3_meson_gxl_setup_regmaps,
.usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
.set_phy_mode = dwc3_meson_gxl_set_phy_mode,
.usb_init = dwc3_meson_gxl_usb_init,
.usb_post_init = dwc3_meson_gxl_usb_post_init,
};
static const struct dwc3_meson_g12a_drvdata gxm_drvdata = {
.otg_switch_supported = true,
.otg_phy_host_port_disable = true,
.clks = meson_gxl_clocks,
.num_clks = ARRAY_SIZE(meson_g12a_clocks),
.phy_names = meson_gxm_phy_names,
.num_phys = ARRAY_SIZE(meson_gxm_phy_names),
.setup_regmaps = dwc3_meson_gxl_setup_regmaps,
.usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
.set_phy_mode = dwc3_meson_gxl_set_phy_mode,
.usb_init = dwc3_meson_gxl_usb_init,
.usb_post_init = dwc3_meson_gxl_usb_post_init,
};
static const struct dwc3_meson_g12a_drvdata axg_drvdata = {
.otg_switch_supported = true,
.clks = meson_gxl_clocks,
.num_clks = ARRAY_SIZE(meson_gxl_clocks),
.phy_names = meson_a1_phy_names,
.num_phys = ARRAY_SIZE(meson_a1_phy_names),
.setup_regmaps = dwc3_meson_gxl_setup_regmaps,
.usb2_init_phy = dwc3_meson_gxl_usb2_init_phy,
.set_phy_mode = dwc3_meson_gxl_set_phy_mode,
.usb_init = dwc3_meson_g12a_usb_init,
.usb_post_init = dwc3_meson_gxl_usb_post_init,
};
static const struct dwc3_meson_g12a_drvdata g12a_drvdata = {
.otg_switch_supported = true,
.clks = meson_g12a_clocks,
.num_clks = ARRAY_SIZE(meson_g12a_clocks),
.phy_names = meson_g12a_phy_names,
.num_phys = ARRAY_SIZE(meson_g12a_phy_names),
.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
.usb_init = dwc3_meson_g12a_usb_init,
};
static const struct dwc3_meson_g12a_drvdata a1_drvdata = {
.otg_switch_supported = false,
.clks = meson_a1_clocks,
.num_clks = ARRAY_SIZE(meson_a1_clocks),
.phy_names = meson_a1_phy_names,
.num_phys = ARRAY_SIZE(meson_a1_phy_names),
.setup_regmaps = dwc3_meson_g12a_setup_regmaps,
.usb2_init_phy = dwc3_meson_g12a_usb2_init_phy,
.set_phy_mode = dwc3_meson_g12a_set_phy_mode,
.usb_init = dwc3_meson_g12a_usb_init,
};
struct dwc3_meson_g12a {
struct device *dev;
struct regmap *u2p_regmap[PHY_COUNT];
struct regmap *usb_glue_regmap;
struct reset_control *reset;
struct phy *phys[PHY_COUNT];
enum usb_dr_mode otg_mode;
enum phy_mode otg_phy_mode;
unsigned int usb2_ports;
unsigned int usb3_ports;
struct regulator *vbus;
struct usb_role_switch_desc switch_desc;
struct usb_role_switch *role_switch;
const struct dwc3_meson_g12a_drvdata *drvdata;
};
static int dwc3_meson_gxl_set_phy_mode(struct dwc3_meson_g12a *priv,
int i, enum phy_mode mode)
{
return phy_set_mode(priv->phys[i], mode);
}
static int dwc3_meson_gxl_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
enum phy_mode mode)
{
/* On GXL PHY must be started in device mode for DWC2 init */
return priv->drvdata->set_phy_mode(priv, i,
(i == USB2_OTG_PHY) ? PHY_MODE_USB_DEVICE
: PHY_MODE_USB_HOST);
}
static int dwc3_meson_g12a_set_phy_mode(struct dwc3_meson_g12a *priv,
int i, enum phy_mode mode)
{
if (mode == PHY_MODE_USB_HOST)
regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
U2P_R0_HOST_DEVICE,
U2P_R0_HOST_DEVICE);
else
regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
U2P_R0_HOST_DEVICE, 0);
return 0;
}
static int dwc3_meson_g12a_usb2_init_phy(struct dwc3_meson_g12a *priv, int i,
enum phy_mode mode)
{
int ret;
regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
U2P_R0_POWER_ON_RESET,
U2P_R0_POWER_ON_RESET);
if (priv->drvdata->otg_switch_supported && i == USB2_OTG_PHY) {
regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS,
U2P_R0_ID_PULLUP | U2P_R0_DRV_VBUS);
ret = priv->drvdata->set_phy_mode(priv, i, mode);
} else
ret = priv->drvdata->set_phy_mode(priv, i,
PHY_MODE_USB_HOST);
if (ret)
return ret;
regmap_update_bits(priv->u2p_regmap[i], U2P_R0,
U2P_R0_POWER_ON_RESET, 0);
return 0;
}
static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv,
enum phy_mode mode)
{
int i, ret;
for (i = 0; i < priv->drvdata->num_phys; ++i) {
if (!priv->phys[i])
continue;
if (!strstr(priv->drvdata->phy_names[i], "usb2"))
continue;
ret = priv->drvdata->usb2_init_phy(priv, i, mode);
if (ret)
return ret;
}
return 0;
}
static void dwc3_meson_g12a_usb3_init(struct dwc3_meson_g12a *priv)
{
regmap_update_bits(priv->usb_glue_regmap, USB_R3,
USB_R3_P30_SSC_RANGE_MASK |
USB_R3_P30_REF_SSP_EN,
USB_R3_P30_SSC_ENABLE |
FIELD_PREP(USB_R3_P30_SSC_RANGE_MASK, 2) |
USB_R3_P30_REF_SSP_EN);
udelay(2);
regmap_update_bits(priv->usb_glue_regmap, USB_R2,
USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK,
FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_3P5DB_MASK, 0x15));
regmap_update_bits(priv->usb_glue_regmap, USB_R2,
USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK,
FIELD_PREP(USB_R2_P30_PCS_TX_DEEMPH_6DB_MASK, 0x20));
udelay(2);
regmap_update_bits(priv->usb_glue_regmap, USB_R1,
USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT,
USB_R1_U3H_HOST_PORT_POWER_CONTROL_PRESENT);
regmap_update_bits(priv->usb_glue_regmap, USB_R1,
USB_R1_P30_PCS_TX_SWING_FULL_MASK,
FIELD_PREP(USB_R1_P30_PCS_TX_SWING_FULL_MASK, 127));
}
static void dwc3_meson_g12a_usb_otg_apply_mode(struct dwc3_meson_g12a *priv,
enum phy_mode mode)
{
if (mode == PHY_MODE_USB_DEVICE) {
if (priv->otg_mode != USB_DR_MODE_OTG &&
priv->drvdata->otg_phy_host_port_disable)
/* Isolate the OTG PHY port from the Host Controller */
regmap_update_bits(priv->usb_glue_regmap, USB_R1,
USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK,
FIELD_PREP(USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK,
BIT(USB2_OTG_PHY)));
regmap_update_bits(priv->usb_glue_regmap, USB_R0,
USB_R0_U2D_ACT, USB_R0_U2D_ACT);
regmap_update_bits(priv->usb_glue_regmap, USB_R0,
USB_R0_U2D_SS_SCALEDOWN_MODE_MASK, 0);
regmap_update_bits(priv->usb_glue_regmap, USB_R4,
USB_R4_P21_SLEEP_M0, USB_R4_P21_SLEEP_M0);
} else {
if (priv->otg_mode != USB_DR_MODE_OTG &&
priv->drvdata->otg_phy_host_port_disable) {
regmap_update_bits(priv->usb_glue_regmap, USB_R1,
USB_R1_U3H_HOST_U2_PORT_DISABLE_MASK, 0);
msleep(500);
}
regmap_update_bits(priv->usb_glue_regmap, USB_R0,
USB_R0_U2D_ACT, 0);
regmap_update_bits(priv->usb_glue_regmap, USB_R4,
USB_R4_P21_SLEEP_M0, 0);
}
}
static int dwc3_meson_g12a_usb_init_glue(struct dwc3_meson_g12a *priv,
enum phy_mode mode)
{
int ret;
ret = dwc3_meson_g12a_usb2_init(priv, mode);
if (ret)
return ret;
regmap_update_bits(priv->usb_glue_regmap, USB_R1,
USB_R1_U3H_FLADJ_30MHZ_REG_MASK,
FIELD_PREP(USB_R1_U3H_FLADJ_30MHZ_REG_MASK, 0x20));
regmap_update_bits(priv->usb_glue_regmap, USB_R5,
USB_R5_ID_DIG_EN_0,
USB_R5_ID_DIG_EN_0);
regmap_update_bits(priv->usb_glue_regmap, USB_R5,
USB_R5_ID_DIG_EN_1,
USB_R5_ID_DIG_EN_1);
regmap_update_bits(priv->usb_glue_regmap, USB_R5,
USB_R5_ID_DIG_TH_MASK,
FIELD_PREP(USB_R5_ID_DIG_TH_MASK, 0xff));
/* If we have an actual SuperSpeed port, initialize it */
if (priv->usb3_ports)
dwc3_meson_g12a_usb3_init(priv);
dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
return 0;
}
static const struct regmap_config phy_meson_g12a_usb_glue_regmap_conf = {
.name = "usb-glue",
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = USB_R5,
};
static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
{
const char *phy_name;
int i;
for (i = 0 ; i < priv->drvdata->num_phys ; ++i) {
phy_name = priv->drvdata->phy_names[i];
priv->phys[i] = devm_phy_optional_get(priv->dev, phy_name);
if (!priv->phys[i])
continue;
if (IS_ERR(priv->phys[i]))
return PTR_ERR(priv->phys[i]);
if (strstr(phy_name, "usb3"))
priv->usb3_ports++;
else
priv->usb2_ports++;
}
dev_info(priv->dev, "USB2 ports: %d\n", priv->usb2_ports);
dev_info(priv->dev, "USB3 ports: %d\n", priv->usb3_ports);
return 0;
}
static enum phy_mode dwc3_meson_g12a_get_id(struct dwc3_meson_g12a *priv)
{
u32 reg;
regmap_read(priv->usb_glue_regmap, USB_R5, &reg);
if (reg & (USB_R5_ID_DIG_SYNC | USB_R5_ID_DIG_REG))
return PHY_MODE_USB_DEVICE;
return PHY_MODE_USB_HOST;
}
static int dwc3_meson_g12a_otg_mode_set(struct dwc3_meson_g12a *priv,
enum phy_mode mode)
{
int ret;
if (!priv->drvdata->otg_switch_supported || !priv->phys[USB2_OTG_PHY])
return -EINVAL;
if (mode == PHY_MODE_USB_HOST)
dev_info(priv->dev, "switching to Host Mode\n");
else
dev_info(priv->dev, "switching to Device Mode\n");
if (priv->vbus) {
if (mode == PHY_MODE_USB_DEVICE)
ret = regulator_disable(priv->vbus);
else
ret = regulator_enable(priv->vbus);
if (ret)
return ret;
}
priv->otg_phy_mode = mode;
ret = priv->drvdata->set_phy_mode(priv, USB2_OTG_PHY, mode);
if (ret)
return ret;
dwc3_meson_g12a_usb_otg_apply_mode(priv, mode);
return 0;
}
static int dwc3_meson_g12a_role_set(struct usb_role_switch *sw,
enum usb_role role)
{
struct dwc3_meson_g12a *priv = usb_role_switch_get_drvdata(sw);
enum phy_mode mode;
if (role == USB_ROLE_NONE)
return 0;
mode = (role == USB_ROLE_HOST) ? PHY_MODE_USB_HOST
: PHY_MODE_USB_DEVICE;
if (mode == priv->otg_phy_mode)
return 0;
if (priv->drvdata->otg_phy_host_port_disable)
dev_warn_once(priv->dev, "Broken manual OTG switch\n");
return dwc3_meson_g12a_otg_mode_set(priv, mode);
}
static enum usb_role dwc3_meson_g12a_role_get(struct usb_role_switch *sw)
{
struct dwc3_meson_g12a *priv = usb_role_switch_get_drvdata(sw);
return priv->otg_phy_mode == PHY_MODE_USB_HOST ?
USB_ROLE_HOST : USB_ROLE_DEVICE;
}
static irqreturn_t dwc3_meson_g12a_irq_thread(int irq, void *data)
{
struct dwc3_meson_g12a *priv = data;
enum phy_mode otg_id;
otg_id = dwc3_meson_g12a_get_id(priv);
if (otg_id != priv->otg_phy_mode) {
if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
dev_warn(priv->dev, "Failed to switch OTG mode\n");
}
regmap_update_bits(priv->usb_glue_regmap, USB_R5,
USB_R5_ID_DIG_IRQ, 0);
return IRQ_HANDLED;
}
static struct device *dwc3_meson_g12_find_child(struct device *dev,
const char *compatible)
{
struct platform_device *pdev;
struct device_node *np;
np = of_get_compatible_child(dev->of_node, compatible);
if (!np)
return NULL;
pdev = of_find_device_by_node(np);
of_node_put(np);
if (!pdev)
return NULL;
return &pdev->dev;
}
static int dwc3_meson_g12a_otg_init(struct platform_device *pdev,
struct dwc3_meson_g12a *priv)
{
enum phy_mode otg_id;
int ret, irq;
struct device *dev = &pdev->dev;
if (!priv->drvdata->otg_switch_supported)
return 0;
if (priv->otg_mode == USB_DR_MODE_OTG) {
/* Ack irq before registering */
regmap_update_bits(priv->usb_glue_regmap, USB_R5,
USB_R5_ID_DIG_IRQ, 0);
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
dwc3_meson_g12a_irq_thread,
IRQF_ONESHOT, pdev->name, priv);
if (ret)
return ret;
}
/* Setup OTG mode corresponding to the ID pin */
if (priv->otg_mode == USB_DR_MODE_OTG) {
otg_id = dwc3_meson_g12a_get_id(priv);
if (otg_id != priv->otg_phy_mode) {
if (dwc3_meson_g12a_otg_mode_set(priv, otg_id))
dev_warn(dev, "Failed to switch OTG mode\n");
}
}
/* Setup role switcher */
priv->switch_desc.usb2_port = dwc3_meson_g12_find_child(dev,
"snps,dwc3");
priv->switch_desc.udc = dwc3_meson_g12_find_child(dev, "snps,dwc2");
priv->switch_desc.allow_userspace_control = true;
priv->switch_desc.set = dwc3_meson_g12a_role_set;
priv->switch_desc.get = dwc3_meson_g12a_role_get;
priv->switch_desc.driver_data = priv;
priv->role_switch = usb_role_switch_register(dev, &priv->switch_desc);
if (IS_ERR(priv->role_switch))
dev_warn(dev, "Unable to register Role Switch\n");
return 0;
}
static int dwc3_meson_gxl_setup_regmaps(struct dwc3_meson_g12a *priv,
void __iomem *base)
{
/* GXL controls the PHY mode in the PHY registers unlike G12A */
priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev, base,
&phy_meson_g12a_usb_glue_regmap_conf);
return PTR_ERR_OR_ZERO(priv->usb_glue_regmap);
}
static int dwc3_meson_g12a_setup_regmaps(struct dwc3_meson_g12a *priv,
void __iomem *base)
{
int i;
priv->usb_glue_regmap = devm_regmap_init_mmio(priv->dev,
base + G12A_GLUE_OFFSET,
&phy_meson_g12a_usb_glue_regmap_conf);
if (IS_ERR(priv->usb_glue_regmap))
return PTR_ERR(priv->usb_glue_regmap);
/* Create a regmap for each USB2 PHY control register set */
for (i = 0; i < priv->drvdata->num_phys; i++) {
struct regmap_config u2p_regmap_config = {
.reg_bits = 8,
.val_bits = 32,
.reg_stride = 4,
.max_register = U2P_R1,
};
if (!strstr(priv->drvdata->phy_names[i], "usb2"))
continue;
u2p_regmap_config.name = devm_kasprintf(priv->dev, GFP_KERNEL,
"u2p-%d", i);
if (!u2p_regmap_config.name)
return -ENOMEM;
priv->u2p_regmap[i] = devm_regmap_init_mmio(priv->dev,
base + (i * U2P_REG_SIZE),
&u2p_regmap_config);
if (IS_ERR(priv->u2p_regmap[i]))
return PTR_ERR(priv->u2p_regmap[i]);
}
return 0;
}
static int dwc3_meson_g12a_usb_init(struct dwc3_meson_g12a *priv)
{
return dwc3_meson_g12a_usb_init_glue(priv, priv->otg_phy_mode);
}
static int dwc3_meson_gxl_usb_init(struct dwc3_meson_g12a *priv)
{
return dwc3_meson_g12a_usb_init_glue(priv, PHY_MODE_USB_DEVICE);
}
static int dwc3_meson_gxl_usb_post_init(struct dwc3_meson_g12a *priv)
{
int ret;
ret = priv->drvdata->set_phy_mode(priv, USB2_OTG_PHY,
priv->otg_phy_mode);
if (ret)
return ret;
dwc3_meson_g12a_usb_otg_apply_mode(priv, priv->otg_phy_mode);
return 0;
}
static int dwc3_meson_g12a_probe(struct platform_device *pdev)
{
struct dwc3_meson_g12a *priv;
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
void __iomem *base;
int ret, i;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
priv->drvdata = of_device_get_match_data(&pdev->dev);
priv->dev = dev;
priv->vbus = devm_regulator_get_optional(dev, "vbus");
if (IS_ERR(priv->vbus)) {
if (PTR_ERR(priv->vbus) == -EPROBE_DEFER)
return PTR_ERR(priv->vbus);
priv->vbus = NULL;
}
ret = devm_clk_bulk_get(dev,
priv->drvdata->num_clks,
priv->drvdata->clks);
if (ret)
return ret;
ret = clk_bulk_prepare_enable(priv->drvdata->num_clks,
priv->drvdata->clks);
if (ret)
return ret;
platform_set_drvdata(pdev, priv);
priv->reset = devm_reset_control_get_shared(dev, NULL);
if (IS_ERR(priv->reset)) {
ret = PTR_ERR(priv->reset);
dev_err(dev, "failed to get device reset, err=%d\n", ret);
goto err_disable_clks;
}
ret = reset_control_reset(priv->reset);
if (ret)
goto err_disable_clks;
ret = dwc3_meson_g12a_get_phys(priv);
if (ret)
goto err_rearm;
ret = priv->drvdata->setup_regmaps(priv, base);
if (ret)
goto err_rearm;
if (priv->vbus) {
ret = regulator_enable(priv->vbus);
if (ret)
goto err_rearm;
}
/* Get dr_mode */
priv->otg_mode = usb_get_dr_mode(dev);
if (priv->otg_mode == USB_DR_MODE_PERIPHERAL)
priv->otg_phy_mode = PHY_MODE_USB_DEVICE;
else
priv->otg_phy_mode = PHY_MODE_USB_HOST;
ret = priv->drvdata->usb_init(priv);
if (ret)
goto err_disable_regulator;
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
goto err_disable_regulator;
}
/* Set PHY Power */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_power_on(priv->phys[i]);
if (ret)
goto err_phys_exit;
}
if (priv->drvdata->usb_post_init) {
ret = priv->drvdata->usb_post_init(priv);
if (ret)
goto err_phys_power;
}
ret = of_platform_populate(np, NULL, NULL, dev);
if (ret)
goto err_phys_power;
ret = dwc3_meson_g12a_otg_init(pdev, priv);
if (ret)
goto err_phys_power;
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
pm_runtime_get_sync(dev);
return 0;
err_phys_power:
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_power_off(priv->phys[i]);
err_phys_exit:
for (i = 0 ; i < PHY_COUNT ; ++i)
phy_exit(priv->phys[i]);
err_disable_regulator:
if (priv->vbus)
regulator_disable(priv->vbus);
err_rearm:
reset_control_rearm(priv->reset);
err_disable_clks:
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
return ret;
}
static int dwc3_meson_g12a_remove(struct platform_device *pdev)
{
struct dwc3_meson_g12a *priv = platform_get_drvdata(pdev);
struct device *dev = &pdev->dev;
int i;
if (priv->drvdata->otg_switch_supported)
usb_role_switch_unregister(priv->role_switch);
of_platform_depopulate(dev);
for (i = 0 ; i < PHY_COUNT ; ++i) {
phy_power_off(priv->phys[i]);
phy_exit(priv->phys[i]);
}
pm_runtime_disable(dev);
pm_runtime_put_noidle(dev);
pm_runtime_set_suspended(dev);
reset_control_rearm(priv->reset);
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
return 0;
}
static int __maybe_unused dwc3_meson_g12a_runtime_suspend(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
clk_bulk_disable_unprepare(priv->drvdata->num_clks,
priv->drvdata->clks);
return 0;
}
static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
return clk_bulk_prepare_enable(priv->drvdata->num_clks,
priv->drvdata->clks);
}
static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
int i, ret;
if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
ret = regulator_disable(priv->vbus);
if (ret)
return ret;
}
for (i = 0 ; i < PHY_COUNT ; ++i) {
phy_power_off(priv->phys[i]);
phy_exit(priv->phys[i]);
}
reset_control_rearm(priv->reset);
return 0;
}
static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
{
struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
int i, ret;
ret = reset_control_reset(priv->reset);
if (ret)
return ret;
ret = priv->drvdata->usb_init(priv);
if (ret)
return ret;
/* Init PHYs */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_init(priv->phys[i]);
if (ret)
return ret;
}
/* Set PHY Power */
for (i = 0 ; i < PHY_COUNT ; ++i) {
ret = phy_power_on(priv->phys[i]);
if (ret)
return ret;
}
if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
ret = regulator_enable(priv->vbus);
if (ret)
return ret;
}
return 0;
}
static const struct dev_pm_ops dwc3_meson_g12a_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc3_meson_g12a_suspend, dwc3_meson_g12a_resume)
SET_RUNTIME_PM_OPS(dwc3_meson_g12a_runtime_suspend,
dwc3_meson_g12a_runtime_resume, NULL)
};
static const struct of_device_id dwc3_meson_g12a_match[] = {
{
.compatible = "amlogic,meson-gxl-usb-ctrl",
.data = &gxl_drvdata,
},
{
.compatible = "amlogic,meson-gxm-usb-ctrl",
.data = &gxm_drvdata,
},
{
.compatible = "amlogic,meson-axg-usb-ctrl",
.data = &axg_drvdata,
},
{
.compatible = "amlogic,meson-g12a-usb-ctrl",
.data = &g12a_drvdata,
},
{
.compatible = "amlogic,meson-a1-usb-ctrl",
.data = &a1_drvdata,
},
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, dwc3_meson_g12a_match);
static struct platform_driver dwc3_meson_g12a_driver = {
.probe = dwc3_meson_g12a_probe,
.remove = dwc3_meson_g12a_remove,
.driver = {
.name = "dwc3-meson-g12a",
.of_match_table = dwc3_meson_g12a_match,
.pm = &dwc3_meson_g12a_dev_pm_ops,
},
};
module_platform_driver(dwc3_meson_g12a_driver);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Amlogic Meson G12A USB Glue Layer");
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
Reference in New Issue View Git Blame Copy Permalink