81 lines
2.1 KiB
Plaintext
81 lines
2.1 KiB
Plaintext
The Exynos display port interface should be configured based on
|
|
the type of panel connected to it.
|
|
|
|
We use two nodes:
|
|
-dp-controller node
|
|
-dptx-phy node(defined inside dp-controller node)
|
|
|
|
For the DP-PHY initialization, we use the dptx-phy node.
|
|
Required properties for dptx-phy:
|
|
-reg:
|
|
Base address of DP PHY register.
|
|
-samsung,enable-mask:
|
|
The bit-mask used to enable/disable DP PHY.
|
|
|
|
For the Panel initialization, we read data from dp-controller node.
|
|
Required properties for dp-controller:
|
|
-compatible:
|
|
should be "samsung,exynos5-dp".
|
|
-reg:
|
|
physical base address of the controller and length
|
|
of memory mapped region.
|
|
-interrupts:
|
|
interrupt combiner values.
|
|
-interrupt-parent:
|
|
phandle to Interrupt combiner node.
|
|
-samsung,color-space:
|
|
input video data format.
|
|
COLOR_RGB = 0, COLOR_YCBCR422 = 1, COLOR_YCBCR444 = 2
|
|
-samsung,dynamic-range:
|
|
dynamic range for input video data.
|
|
VESA = 0, CEA = 1
|
|
-samsung,ycbcr-coeff:
|
|
YCbCr co-efficients for input video.
|
|
COLOR_YCBCR601 = 0, COLOR_YCBCR709 = 1
|
|
-samsung,color-depth:
|
|
number of bits per colour component.
|
|
COLOR_6 = 0, COLOR_8 = 1, COLOR_10 = 2, COLOR_12 = 3
|
|
-samsung,link-rate:
|
|
link rate supported by the panel.
|
|
LINK_RATE_1_62GBPS = 0x6, LINK_RATE_2_70GBPS = 0x0A
|
|
-samsung,lane-count:
|
|
number of lanes supported by the panel.
|
|
LANE_COUNT1 = 1, LANE_COUNT2 = 2, LANE_COUNT4 = 4
|
|
|
|
Optional properties for dp-controller:
|
|
-interlaced:
|
|
interlace scan mode.
|
|
Progressive if defined, Interlaced if not defined
|
|
-vsync-active-high:
|
|
VSYNC polarity configuration.
|
|
High if defined, Low if not defined
|
|
-hsync-active-high:
|
|
HSYNC polarity configuration.
|
|
High if defined, Low if not defined
|
|
|
|
Example:
|
|
|
|
SOC specific portion:
|
|
dp-controller {
|
|
compatible = "samsung,exynos5-dp";
|
|
reg = <0x145b0000 0x10000>;
|
|
interrupts = <10 3>;
|
|
interrupt-parent = <&combiner>;
|
|
|
|
dptx-phy {
|
|
reg = <0x10040720>;
|
|
samsung,enable-mask = <1>;
|
|
};
|
|
|
|
};
|
|
|
|
Board Specific portion:
|
|
dp-controller {
|
|
samsung,color-space = <0>;
|
|
samsung,dynamic-range = <0>;
|
|
samsung,ycbcr-coeff = <0>;
|
|
samsung,color-depth = <1>;
|
|
samsung,link-rate = <0x0a>;
|
|
samsung,lane-count = <4>;
|
|
};
|