OpenCloudOS-Kernel/drivers/usb
Douglas Anderson 69b76cdff5 usb: dwc2: host: Support immediate retries for split transactions
In some cases, like when you've got a "Microsoft Wireless Keyboard 2000"
connected to dwc2 with a hub, expected that we'll get some transfer
errors sometimes.  The controller is expected to try at least 3 times
before giving up.  See figure "Figure A-67. Normal HS CSPLIT 3 Strikes
Smash" in the USB spec.

The dwc2 controller has a way to support this by using the "EC_MC"
field.  The Raspberry Pi driver has logic for setting this right.  See
fiq_fsm_queue_split_transaction() in their "dwc_otg_hcd.c".  Let's use
the same logic.

After making this change, we no longer get dropped characters from the
above mentioned keyboard.  Other devices on the same bus as the keyboard
also behave more properly.

Thanks for Julius Werner for the expert analysis and suggestions.

Acked-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-12-15 09:12:41 -06:00
..
atm USB: atm: cxacru: fix blank line after declaration 2015-07-22 14:55:22 -07:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: imx: fix a possible NULL dereference 2015-11-18 15:27:31 +08:00
class USB: cdc_acm: Ignore Infineon Flash Loader utility 2015-11-23 10:31:05 +01:00
common usb: common: of_usb_get_dr_mode to usb_get_dr_mode 2015-09-27 10:54:31 -05:00
core USB: add quirk for devices with broken LPM 2015-12-11 15:40:51 -08:00
dwc2 usb: dwc2: host: Support immediate retries for split transactions 2015-12-15 09:12:41 -06:00
dwc3 usb: dwc3: remove dwc3-qcom in favor of dwc3-of-simple 2015-12-15 09:12:41 -06:00
early
gadget usb: gadget: gmidi: Cleanup legacy code 2015-12-15 09:12:41 -06:00
host xhci: fix usb2 resume timing and races. 2015-12-11 15:40:51 -08:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb: misc: usbtest: Remove timeval usage 2015-12-15 09:12:41 -06:00
mon USB: mon_stat.c: move assignment out of if () block 2015-05-10 16:01:11 +02:00
musb usb: musb: fail with error when no DMA controller set 2015-12-09 09:36:03 -06:00
phy usb: phy: msm: fix a possible NULL dereference 2015-12-08 08:13:28 -06:00
renesas_usbhs usb: renesas_usbhs: Modify ep.caps.type_xxx and usb_ep_maxpacket_limit() 2015-12-15 09:12:41 -06:00
serial USB: serial: Another Infineon flash loader USB ID 2015-11-23 10:32:59 +01:00
storage usb-storage: Fix scsi-sd failure "Invalid field in cdb" for USB adapter JMicron 2015-12-01 10:23:33 -08:00
usbip usbip: vhci_hcd: at unlink, return -EIDRM if vhci_rx took the urb 2015-10-04 10:59:03 +01:00
wusbcore wusbcore: rh: use USB_DT_HUB 2015-04-03 19:03:15 +02:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb-host: Remove fusbh200 driver 2015-10-16 23:44:33 -07:00
README
usb-skeleton.c

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.