292 lines
6.9 KiB
C
292 lines
6.9 KiB
C
/*
|
|
* This file configures the internal USB PHY in OMAP4430. Used
|
|
* with TWL6030 transceiver and MUSB on OMAP4430.
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Author: Hema HK <hemahk@ti.com>
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <linux/usb.h>
|
|
|
|
#include <plat/usb.h>
|
|
#include "control.h"
|
|
|
|
/* OMAP control module register for UTMI PHY */
|
|
#define CONTROL_DEV_CONF 0x300
|
|
#define PHY_PD 0x1
|
|
|
|
#define USBOTGHS_CONTROL 0x33c
|
|
#define AVALID BIT(0)
|
|
#define BVALID BIT(1)
|
|
#define VBUSVALID BIT(2)
|
|
#define SESSEND BIT(3)
|
|
#define IDDIG BIT(4)
|
|
|
|
static struct clk *phyclk, *clk48m, *clk32k;
|
|
static void __iomem *ctrl_base;
|
|
static int usbotghs_control;
|
|
|
|
int omap4430_phy_init(struct device *dev)
|
|
{
|
|
ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
|
|
if (!ctrl_base) {
|
|
pr_err("control module ioremap failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
/* Power down the phy */
|
|
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
|
|
|
|
if (!dev) {
|
|
iounmap(ctrl_base);
|
|
return 0;
|
|
}
|
|
|
|
phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
|
|
if (IS_ERR(phyclk)) {
|
|
dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
|
|
iounmap(ctrl_base);
|
|
return PTR_ERR(phyclk);
|
|
}
|
|
|
|
clk48m = clk_get(dev, "ocp2scp_usb_phy_phy_48m");
|
|
if (IS_ERR(clk48m)) {
|
|
dev_err(dev, "cannot clk_get ocp2scp_usb_phy_phy_48m\n");
|
|
clk_put(phyclk);
|
|
iounmap(ctrl_base);
|
|
return PTR_ERR(clk48m);
|
|
}
|
|
|
|
clk32k = clk_get(dev, "usb_phy_cm_clk32k");
|
|
if (IS_ERR(clk32k)) {
|
|
dev_err(dev, "cannot clk_get usb_phy_cm_clk32k\n");
|
|
clk_put(phyclk);
|
|
clk_put(clk48m);
|
|
iounmap(ctrl_base);
|
|
return PTR_ERR(clk32k);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int omap4430_phy_set_clk(struct device *dev, int on)
|
|
{
|
|
static int state;
|
|
|
|
if (on && !state) {
|
|
/* Enable the phy clocks */
|
|
clk_enable(phyclk);
|
|
clk_enable(clk48m);
|
|
clk_enable(clk32k);
|
|
state = 1;
|
|
} else if (state) {
|
|
/* Disable the phy clocks */
|
|
clk_disable(phyclk);
|
|
clk_disable(clk48m);
|
|
clk_disable(clk32k);
|
|
state = 0;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int omap4430_phy_power(struct device *dev, int ID, int on)
|
|
{
|
|
if (on) {
|
|
if (ID)
|
|
/* enable VBUS valid, IDDIG groung */
|
|
__raw_writel(AVALID | VBUSVALID, ctrl_base +
|
|
USBOTGHS_CONTROL);
|
|
else
|
|
/*
|
|
* Enable VBUS Valid, AValid and IDDIG
|
|
* high impedance
|
|
*/
|
|
__raw_writel(IDDIG | AVALID | VBUSVALID,
|
|
ctrl_base + USBOTGHS_CONTROL);
|
|
} else {
|
|
/* Enable session END and IDIG to high impedance. */
|
|
__raw_writel(SESSEND | IDDIG, ctrl_base +
|
|
USBOTGHS_CONTROL);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
int omap4430_phy_suspend(struct device *dev, int suspend)
|
|
{
|
|
if (suspend) {
|
|
/* Disable the clocks */
|
|
omap4430_phy_set_clk(dev, 0);
|
|
/* Power down the phy */
|
|
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
|
|
|
|
/* save the context */
|
|
usbotghs_control = __raw_readl(ctrl_base + USBOTGHS_CONTROL);
|
|
} else {
|
|
/* Enable the internel phy clcoks */
|
|
omap4430_phy_set_clk(dev, 1);
|
|
/* power on the phy */
|
|
if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
|
|
__raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
|
|
mdelay(200);
|
|
}
|
|
|
|
/* restore the context */
|
|
__raw_writel(usbotghs_control, ctrl_base + USBOTGHS_CONTROL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int omap4430_phy_exit(struct device *dev)
|
|
{
|
|
if (ctrl_base)
|
|
iounmap(ctrl_base);
|
|
if (phyclk)
|
|
clk_put(phyclk);
|
|
if (clk48m)
|
|
clk_put(clk48m);
|
|
if (clk32k)
|
|
clk_put(clk32k);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void am35x_musb_reset(void)
|
|
{
|
|
u32 regval;
|
|
|
|
/* Reset the musb interface */
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
|
|
|
|
regval |= AM35XX_USBOTGSS_SW_RST;
|
|
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
|
|
|
|
regval &= ~AM35XX_USBOTGSS_SW_RST;
|
|
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
|
|
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
|
|
}
|
|
|
|
void am35x_musb_phy_power(u8 on)
|
|
{
|
|
unsigned long timeout = jiffies + msecs_to_jiffies(100);
|
|
u32 devconf2;
|
|
|
|
if (on) {
|
|
/*
|
|
* Start the on-chip PHY and its PLL.
|
|
*/
|
|
devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
|
|
|
|
devconf2 &= ~(CONF2_RESET | CONF2_PHYPWRDN | CONF2_OTGPWRDN);
|
|
devconf2 |= CONF2_PHY_PLLON;
|
|
|
|
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
|
|
|
|
pr_info(KERN_INFO "Waiting for PHY clock good...\n");
|
|
while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
|
|
& CONF2_PHYCLKGD)) {
|
|
cpu_relax();
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
pr_err(KERN_ERR "musb PHY clock good timed out\n");
|
|
break;
|
|
}
|
|
}
|
|
} else {
|
|
/*
|
|
* Power down the on-chip PHY.
|
|
*/
|
|
devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
|
|
|
|
devconf2 &= ~CONF2_PHY_PLLON;
|
|
devconf2 |= CONF2_PHYPWRDN | CONF2_OTGPWRDN;
|
|
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
|
|
}
|
|
}
|
|
|
|
void am35x_musb_clear_irq(void)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
regval |= AM35XX_USBOTGSS_INT_CLR;
|
|
omap_ctrl_writel(regval, AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
}
|
|
|
|
void am35x_set_mode(u8 musb_mode)
|
|
{
|
|
u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
|
|
|
|
devconf2 &= ~CONF2_OTGMODE;
|
|
switch (musb_mode) {
|
|
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
|
|
devconf2 |= CONF2_FORCE_HOST;
|
|
break;
|
|
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
|
|
devconf2 |= CONF2_FORCE_DEVICE;
|
|
break;
|
|
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
|
|
devconf2 |= CONF2_NO_OVERRIDE;
|
|
break;
|
|
default:
|
|
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
|
|
}
|
|
|
|
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
|
|
}
|
|
|
|
void ti81xx_musb_phy_power(u8 on)
|
|
{
|
|
void __iomem *scm_base = NULL;
|
|
u32 usbphycfg;
|
|
|
|
scm_base = ioremap(TI81XX_SCM_BASE, SZ_2K);
|
|
if (!scm_base) {
|
|
pr_err("system control module ioremap failed\n");
|
|
return;
|
|
}
|
|
|
|
usbphycfg = __raw_readl(scm_base + USBCTRL0);
|
|
|
|
if (on) {
|
|
if (cpu_is_ti816x()) {
|
|
usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
|
|
usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
|
|
} else if (cpu_is_ti814x()) {
|
|
usbphycfg &= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
|
|
| USBPHY_DPINPUT | USBPHY_DMINPUT);
|
|
usbphycfg |= (USBPHY_OTGVDET_EN | USBPHY_OTGSESSEND_EN
|
|
| USBPHY_DPOPBUFCTL | USBPHY_DMOPBUFCTL);
|
|
}
|
|
} else {
|
|
if (cpu_is_ti816x())
|
|
usbphycfg &= ~TI816X_USBPHY0_NORMAL_MODE;
|
|
else if (cpu_is_ti814x())
|
|
usbphycfg |= USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN;
|
|
|
|
}
|
|
__raw_writel(usbphycfg, scm_base + USBCTRL0);
|
|
|
|
iounmap(scm_base);
|
|
}
|