UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/serial
History
Maciej W. Rozycki 8b4a40809e zs: move to the serial subsystem 
This is a reimplementation of the zs driver for the serial subsystem.  Any
resemblance to the old driver is purely coincidential.  ;-) I do hope I got
the handling of modem lines right -- better do not tackle me about the
issue unless you feel too good...

Any users of the old driver: please note the numbers of the serial lines
have now been swapped, i.e.  ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3.  It has
to do with the modem lines mentioned above; basically the port A in a given
chip has to be initialised before the port B if you want to use the latter
as the serial console (which is usually the case), as operations on modem
lines of the serial line associated with the port B access both ports (see
the comment at the top of the driver for the details of wiring used).
Please update your scripts.

This is also the reason each SCC now requests an IRQ once only (as seen in
"/proc/interrupts") -- the handler takes care of both ports at once as the
line associated with the port B has to take status update interrupts from
both ports (and yet the line of the port A takes its own for itself too).
The old driver never got it right...

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
 		2007-07-18 08:38:22 -07:00
..
cpm_uart [POWERPC] CPM_UART: Use inline function form of eieio 2007-07-10 00:33:19 -05:00
jsm PCI: Change all drivers to use pci_device->revision 2007-07-11 16:02:10 -07:00
8250.c serial: convert early_uart to earlycon for 8250 2007-07-16 09:05:35 -07:00
8250.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
8250_accent.c
…
8250_acorn.c [ARM] ecard: add ecardm_iomap() / ecardm_iounmap() 2007-05-11 17:19:02 +01:00
8250_au1x00.c [SERIAL] AMD Alchemy UART: claim memory range 2006-04-30 11:15:58 +01:00
8250_boca.c
…
8250_early.c serial: convert early_uart to earlycon for 8250 2007-07-16 09:05:35 -07:00
8250_exar_st16c554.c [PATCH] Exar quad port serial 2006-12-07 08:39:35 -08:00
8250_fourport.c
…
8250_gsc.c [PARISC] Clean up asm-parisc/serial.h 2006-10-04 06:47:03 -06:00
8250_hp300.c serial: add early_serial_setup() back to header file 2007-07-18 08:38:22 -07:00
8250_hub6.c
…
8250_mca.c Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
8250_pci.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
8250_pnp.c [PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c 2007-03-23 11:01:22 -07:00
21285.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
68360serial.c 68360serial: remove broken optimisation 2007-07-16 09:05:51 -07:00
Kconfig zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
Makefile zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
amba-pl010.c [ARM] Fix 4417/1: Serial: Fix AMBA drivers locking 2007-06-05 19:39:49 +01:00
amba-pl011.c [ARM] 4417/1: Serial: Fix AMBA drivers locking 2007-05-30 14:33:01 +01:00
atmel_serial.c atmel_serial: fix break handling 2007-07-16 09:05:45 -07:00
atmel_serial.h [ARM] 4357/1: AT91: Support slower serial baud-rates 2007-05-03 14:12:45 +01:00
bfin_5xx.c Blackfin serial driver: supporting BF548-EZKIT serial port 2007-07-12 16:43:46 +08:00
clps711x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
crisv10.c [PATCH] Char: tty_wakeup cleanup 2007-02-11 10:51:26 -08:00
dz.c [PATCH] dz: remove struct pt_regs references 2007-03-05 07:57:51 -08:00
dz.h [PATCH] dz: Fixes to make it work 2006-12-07 08:39:41 -08:00
icom.c icom: add new sub-device-id to support new adapter 2007-05-17 05:23:05 -07:00
icom.h do not truncate irq number for icom adapter 2007-04-24 08:23:08 -07:00
imx.c [ARM] 4328/1: Move i.MX UART regs to driver 2007-05-03 20:24:21 +01:00
ioc3_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ioc4_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ip22zilog.c Update zilog timeout 2007-07-16 09:05:42 -07:00
ip22zilog.h
…
m32r_sio.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
m32r_sio.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
m32r_sio_reg.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
mcfserial.c [PATCH] m68knommu: fix work queues in mcfserial.c driver 2007-03-06 18:08:38 -08:00
mcfserial.h Remove obsolete #include <linux/config.h> 2006-06-30 19:25:36 +02:00
mpc52xx_uart.c [POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console 2007-05-07 20:31:15 +10:00
mpsc.c serial: clear proper MPSC interrupt cause bits 2007-06-28 11:38:29 -07:00
mux.c Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git 2007-02-17 00:18:23 -05:00
netx-serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
of_serial.c [POWERPC] of_serial: add port type checking 2007-07-10 21:53:42 +10:00
pmac_zilog.c [POWERPC] Rename device_is_compatible to of_device_is_compatible 2007-05-07 20:31:14 +10:00
pmac_zilog.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
pxa.c [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX 2007-04-21 23:14:01 +01:00
s3c2410.c SPIN_LOCK_UNLOCKED cleanup in drivers/serial 2007-05-08 11:15:11 -07:00
sa1100.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
sb1250-duart.c sb1250-duart.c: SB1250 DUART serial support 2007-07-17 10:23:03 -07:00
serial_core.c serial: assert DTR for serial console devices 2007-07-16 09:05:34 -07:00
serial_cs.c PCMCIA-NETDEV : add new ID of lan&modem multifunction card 2007-07-08 22:16:39 -04:00
serial_ks8695.c [ARM] 4411/1: KS8695: Another serial driver fix 2007-05-30 13:15:19 +01:00
serial_lh7a40x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_txx9.c serial_txx9: zap changelog from source code 2007-05-08 11:15:12 -07:00
sh-sci.c sh: Preliminary support for the SH-X3 CPU. 2007-06-20 18:27:10 +09:00
sh-sci.h sh: Preliminary support for the SH-X3 CPU. 2007-06-20 18:27:10 +09:00
sn_console.c sn_console section mismatch warning 2007-07-16 09:05:53 -07:00
suncore.c [SPARC]: Linux always started with 9600 8N1 2007-05-29 02:50:07 -07:00
suncore.h
…
sunhv.c [SERIAL] SUNHV: Fix jerky console on LDOM guests. 2007-07-16 17:12:00 -07:00
sunsab.c [SERIAL]: Fix console write locking in sparc drivers. 2007-07-16 04:05:28 -07:00
sunsab.h
…
sunsu.c [SERIAL]: Fix console write locking in sparc drivers. 2007-07-16 04:05:28 -07:00
sunzilog.c [SERIAL]: Fix console write locking in sparc drivers. 2007-07-16 04:05:28 -07:00
sunzilog.h [SERIAL] sunzilog: Interrupt enable before ISR handler installed 2007-05-09 13:49:04 -07:00
uartlite.c [PATCH] drivers/serial NULL noise removal 2007-02-09 09:14:06 -08:00
v850e_uart.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
vr41xx_siu.c [MIPS] separate platform_device registration for VR41xx serial interface 2007-07-12 17:41:13 +01:00
zs.c zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00
zs.h zs: move to the serial subsystem 2007-07-18 08:38:22 -07:00