OpenCloudOS-Kernel/drivers/usb
Felipe Balbi 676e349744 usb: dwc3: gadget: update DCFG.NumP to max burst size
NumP field of DCFG register is used on NumP field of
ACK TP header and it tells the host how many packets
an endpoint can receive before waiting for
synchronization.

Documentation says it should be set to anything
<=bMaxBurst. Interestingly, however, this setting is
not per-endpoint how it should be (different
endpoints could have different burst sizes), but
things seem to work okay right now.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28 10:47:29 +03:00
..
atm USB: cxacru: fix an bounds check warning 2016-02-03 13:52:10 -08:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea USB patches for 4.6-rc1 2016-03-17 14:24:26 -07:00
class USB: cdc-acm: more sanity checking 2016-03-18 09:19:02 -07:00
common Merge branch 'akpm' (patches from Andrew) 2016-03-18 19:26:54 -07:00
core usb: fix regression in SuperSpeed endpoint descriptor parsing 2016-03-30 21:57:58 -07:00
dwc2 usb: dwc2: Proper cleanup on dr_mode failure 2016-04-28 09:41:34 +03:00
dwc3 usb: dwc3: gadget: update DCFG.NumP to max burst size 2016-04-28 10:47:29 +03:00
early
gadget usb: gadget: composite: avoid kernel oops with bad gadgets 2016-04-28 09:02:00 +03:00
host This is the bulk of GPIO changes for kernel v4.6: 2016-03-17 21:05:32 -07:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc USB: iowarrior: fix oops with malicious USB descriptors 2016-03-18 09:19:02 -07:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
musb Merge commit '840f5b0572ea' into v4l_for_linus 2016-03-15 07:48:28 -03:00
phy usb: phy: qcom: use PTR_ERR_OR_ZERO() 2016-04-14 09:24:38 +03:00
renesas_usbhs usb: renesas_usbhs: use usb_gadget_{un}map_request_by_dev() for IPMMU 2016-04-19 11:11:55 +03:00
serial USB-serial fixes for v4.6-rc3 2016-04-08 15:41:58 -07:00
storage mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros 2016-04-04 10:41:08 -07:00
usbip USB: usbip: fix potential out-of-bounds write 2016-03-30 21:55:36 -07:00
wusbcore USB patches for 4.6-rc1 2016-03-17 14:24:26 -07:00
Kconfig usb: common: rework CONFIG_USB_COMMON logic 2016-04-18 15:23:36 +03:00
Makefile usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
README
usb-skeleton.c

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.