4438 lines
133 KiB
C
4438 lines
133 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* xHCI host controller driver
|
|
*
|
|
* Copyright (C) 2008 Intel Corp.
|
|
*
|
|
* Author: Sarah Sharp
|
|
* Some code borrowed from the Linux EHCI driver.
|
|
*/
|
|
|
|
/*
|
|
* Ring initialization rules:
|
|
* 1. Each segment is initialized to zero, except for link TRBs.
|
|
* 2. Ring cycle state = 0. This represents Producer Cycle State (PCS) or
|
|
* Consumer Cycle State (CCS), depending on ring function.
|
|
* 3. Enqueue pointer = dequeue pointer = address of first TRB in the segment.
|
|
*
|
|
* Ring behavior rules:
|
|
* 1. A ring is empty if enqueue == dequeue. This means there will always be at
|
|
* least one free TRB in the ring. This is useful if you want to turn that
|
|
* into a link TRB and expand the ring.
|
|
* 2. When incrementing an enqueue or dequeue pointer, if the next TRB is a
|
|
* link TRB, then load the pointer with the address in the link TRB. If the
|
|
* link TRB had its toggle bit set, you may need to update the ring cycle
|
|
* state (see cycle bit rules). You may have to do this multiple times
|
|
* until you reach a non-link TRB.
|
|
* 3. A ring is full if enqueue++ (for the definition of increment above)
|
|
* equals the dequeue pointer.
|
|
*
|
|
* Cycle bit rules:
|
|
* 1. When a consumer increments a dequeue pointer and encounters a toggle bit
|
|
* in a link TRB, it must toggle the ring cycle state.
|
|
* 2. When a producer increments an enqueue pointer and encounters a toggle bit
|
|
* in a link TRB, it must toggle the ring cycle state.
|
|
*
|
|
* Producer rules:
|
|
* 1. Check if ring is full before you enqueue.
|
|
* 2. Write the ring cycle state to the cycle bit in the TRB you're enqueuing.
|
|
* Update enqueue pointer between each write (which may update the ring
|
|
* cycle state).
|
|
* 3. Notify consumer. If SW is producer, it rings the doorbell for command
|
|
* and endpoint rings. If HC is the producer for the event ring,
|
|
* and it generates an interrupt according to interrupt modulation rules.
|
|
*
|
|
* Consumer rules:
|
|
* 1. Check if TRB belongs to you. If the cycle bit == your ring cycle state,
|
|
* the TRB is owned by the consumer.
|
|
* 2. Update dequeue pointer (which may update the ring cycle state) and
|
|
* continue processing TRBs until you reach a TRB which is not owned by you.
|
|
* 3. Notify the producer. SW is the consumer for the event ring, and it
|
|
* updates event ring dequeue pointer. HC is the consumer for the command and
|
|
* endpoint rings; it generates events on the event ring for these.
|
|
*/
|
|
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include "xhci.h"
|
|
#include "xhci-trace.h"
|
|
|
|
static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
u32 field1, u32 field2,
|
|
u32 field3, u32 field4, bool command_must_succeed);
|
|
|
|
/*
|
|
* Returns zero if the TRB isn't in this segment, otherwise it returns the DMA
|
|
* address of the TRB.
|
|
*/
|
|
dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg,
|
|
union xhci_trb *trb)
|
|
{
|
|
unsigned long segment_offset;
|
|
|
|
if (!seg || !trb || trb < seg->trbs)
|
|
return 0;
|
|
/* offset in TRBs */
|
|
segment_offset = trb - seg->trbs;
|
|
if (segment_offset >= TRBS_PER_SEGMENT)
|
|
return 0;
|
|
return seg->dma + (segment_offset * sizeof(*trb));
|
|
}
|
|
|
|
static bool trb_is_noop(union xhci_trb *trb)
|
|
{
|
|
return TRB_TYPE_NOOP_LE32(trb->generic.field[3]);
|
|
}
|
|
|
|
static bool trb_is_link(union xhci_trb *trb)
|
|
{
|
|
return TRB_TYPE_LINK_LE32(trb->link.control);
|
|
}
|
|
|
|
static bool last_trb_on_seg(struct xhci_segment *seg, union xhci_trb *trb)
|
|
{
|
|
return trb == &seg->trbs[TRBS_PER_SEGMENT - 1];
|
|
}
|
|
|
|
static bool last_trb_on_ring(struct xhci_ring *ring,
|
|
struct xhci_segment *seg, union xhci_trb *trb)
|
|
{
|
|
return last_trb_on_seg(seg, trb) && (seg->next == ring->first_seg);
|
|
}
|
|
|
|
static bool link_trb_toggles_cycle(union xhci_trb *trb)
|
|
{
|
|
return le32_to_cpu(trb->link.control) & LINK_TOGGLE;
|
|
}
|
|
|
|
static bool last_td_in_urb(struct xhci_td *td)
|
|
{
|
|
struct urb_priv *urb_priv = td->urb->hcpriv;
|
|
|
|
return urb_priv->num_tds_done == urb_priv->num_tds;
|
|
}
|
|
|
|
static void inc_td_cnt(struct urb *urb)
|
|
{
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
|
|
urb_priv->num_tds_done++;
|
|
}
|
|
|
|
static void trb_to_noop(union xhci_trb *trb, u32 noop_type)
|
|
{
|
|
if (trb_is_link(trb)) {
|
|
/* unchain chained link TRBs */
|
|
trb->link.control &= cpu_to_le32(~TRB_CHAIN);
|
|
} else {
|
|
trb->generic.field[0] = 0;
|
|
trb->generic.field[1] = 0;
|
|
trb->generic.field[2] = 0;
|
|
/* Preserve only the cycle bit of this TRB */
|
|
trb->generic.field[3] &= cpu_to_le32(TRB_CYCLE);
|
|
trb->generic.field[3] |= cpu_to_le32(TRB_TYPE(noop_type));
|
|
}
|
|
}
|
|
|
|
/* Updates trb to point to the next TRB in the ring, and updates seg if the next
|
|
* TRB is in a new segment. This does not skip over link TRBs, and it does not
|
|
* effect the ring dequeue or enqueue pointers.
|
|
*/
|
|
static void next_trb(struct xhci_hcd *xhci,
|
|
struct xhci_ring *ring,
|
|
struct xhci_segment **seg,
|
|
union xhci_trb **trb)
|
|
{
|
|
if (trb_is_link(*trb)) {
|
|
*seg = (*seg)->next;
|
|
*trb = ((*seg)->trbs);
|
|
} else {
|
|
(*trb)++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* See Cycle bit rules. SW is the consumer for the event ring only.
|
|
*/
|
|
void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring)
|
|
{
|
|
unsigned int link_trb_count = 0;
|
|
|
|
/* event ring doesn't have link trbs, check for last trb */
|
|
if (ring->type == TYPE_EVENT) {
|
|
if (!last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
|
|
ring->dequeue++;
|
|
goto out;
|
|
}
|
|
if (last_trb_on_ring(ring, ring->deq_seg, ring->dequeue))
|
|
ring->cycle_state ^= 1;
|
|
ring->deq_seg = ring->deq_seg->next;
|
|
ring->dequeue = ring->deq_seg->trbs;
|
|
goto out;
|
|
}
|
|
|
|
/* All other rings have link trbs */
|
|
if (!trb_is_link(ring->dequeue)) {
|
|
if (last_trb_on_seg(ring->deq_seg, ring->dequeue)) {
|
|
xhci_warn(xhci, "Missing link TRB at end of segment\n");
|
|
} else {
|
|
ring->dequeue++;
|
|
ring->num_trbs_free++;
|
|
}
|
|
}
|
|
|
|
while (trb_is_link(ring->dequeue)) {
|
|
ring->deq_seg = ring->deq_seg->next;
|
|
ring->dequeue = ring->deq_seg->trbs;
|
|
|
|
if (link_trb_count++ > ring->num_segs) {
|
|
xhci_warn(xhci, "Ring is an endless link TRB loop\n");
|
|
break;
|
|
}
|
|
}
|
|
out:
|
|
trace_xhci_inc_deq(ring);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* See Cycle bit rules. SW is the consumer for the event ring only.
|
|
*
|
|
* If we've just enqueued a TRB that is in the middle of a TD (meaning the
|
|
* chain bit is set), then set the chain bit in all the following link TRBs.
|
|
* If we've enqueued the last TRB in a TD, make sure the following link TRBs
|
|
* have their chain bit cleared (so that each Link TRB is a separate TD).
|
|
*
|
|
* Section 6.4.4.1 of the 0.95 spec says link TRBs cannot have the chain bit
|
|
* set, but other sections talk about dealing with the chain bit set. This was
|
|
* fixed in the 0.96 specification errata, but we have to assume that all 0.95
|
|
* xHCI hardware can't handle the chain bit being cleared on a link TRB.
|
|
*
|
|
* @more_trbs_coming: Will you enqueue more TRBs before calling
|
|
* prepare_transfer()?
|
|
*/
|
|
static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring,
|
|
bool more_trbs_coming)
|
|
{
|
|
u32 chain;
|
|
union xhci_trb *next;
|
|
unsigned int link_trb_count = 0;
|
|
|
|
chain = le32_to_cpu(ring->enqueue->generic.field[3]) & TRB_CHAIN;
|
|
/* If this is not event ring, there is one less usable TRB */
|
|
if (!trb_is_link(ring->enqueue))
|
|
ring->num_trbs_free--;
|
|
|
|
if (last_trb_on_seg(ring->enq_seg, ring->enqueue)) {
|
|
xhci_err(xhci, "Tried to move enqueue past ring segment\n");
|
|
return;
|
|
}
|
|
|
|
next = ++(ring->enqueue);
|
|
|
|
/* Update the dequeue pointer further if that was a link TRB */
|
|
while (trb_is_link(next)) {
|
|
|
|
/*
|
|
* If the caller doesn't plan on enqueueing more TDs before
|
|
* ringing the doorbell, then we don't want to give the link TRB
|
|
* to the hardware just yet. We'll give the link TRB back in
|
|
* prepare_ring() just before we enqueue the TD at the top of
|
|
* the ring.
|
|
*/
|
|
if (!chain && !more_trbs_coming)
|
|
break;
|
|
|
|
/* If we're not dealing with 0.95 hardware or isoc rings on
|
|
* AMD 0.96 host, carry over the chain bit of the previous TRB
|
|
* (which may mean the chain bit is cleared).
|
|
*/
|
|
if (!(ring->type == TYPE_ISOC &&
|
|
(xhci->quirks & XHCI_AMD_0x96_HOST)) &&
|
|
!xhci_link_trb_quirk(xhci)) {
|
|
next->link.control &= cpu_to_le32(~TRB_CHAIN);
|
|
next->link.control |= cpu_to_le32(chain);
|
|
}
|
|
/* Give this link TRB to the hardware */
|
|
wmb();
|
|
next->link.control ^= cpu_to_le32(TRB_CYCLE);
|
|
|
|
/* Toggle the cycle bit after the last ring segment. */
|
|
if (link_trb_toggles_cycle(next))
|
|
ring->cycle_state ^= 1;
|
|
|
|
ring->enq_seg = ring->enq_seg->next;
|
|
ring->enqueue = ring->enq_seg->trbs;
|
|
next = ring->enqueue;
|
|
|
|
if (link_trb_count++ > ring->num_segs) {
|
|
xhci_warn(xhci, "%s: Ring link TRB loop\n", __func__);
|
|
break;
|
|
}
|
|
}
|
|
|
|
trace_xhci_inc_enq(ring);
|
|
}
|
|
|
|
/*
|
|
* Check to see if there's room to enqueue num_trbs on the ring and make sure
|
|
* enqueue pointer will not advance into dequeue segment. See rules above.
|
|
*/
|
|
static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
|
|
unsigned int num_trbs)
|
|
{
|
|
int num_trbs_in_deq_seg;
|
|
|
|
if (ring->num_trbs_free < num_trbs)
|
|
return 0;
|
|
|
|
if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) {
|
|
num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs;
|
|
if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg)
|
|
return 0;
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Ring the host controller doorbell after placing a command on the ring */
|
|
void xhci_ring_cmd_db(struct xhci_hcd *xhci)
|
|
{
|
|
if (!(xhci->cmd_ring_state & CMD_RING_STATE_RUNNING))
|
|
return;
|
|
|
|
xhci_dbg(xhci, "// Ding dong!\n");
|
|
|
|
trace_xhci_ring_host_doorbell(0, DB_VALUE_HOST);
|
|
|
|
writel(DB_VALUE_HOST, &xhci->dba->doorbell[0]);
|
|
/* Flush PCI posted writes */
|
|
readl(&xhci->dba->doorbell[0]);
|
|
}
|
|
|
|
static bool xhci_mod_cmd_timer(struct xhci_hcd *xhci, unsigned long delay)
|
|
{
|
|
return mod_delayed_work(system_wq, &xhci->cmd_timer, delay);
|
|
}
|
|
|
|
static struct xhci_command *xhci_next_queued_cmd(struct xhci_hcd *xhci)
|
|
{
|
|
return list_first_entry_or_null(&xhci->cmd_list, struct xhci_command,
|
|
cmd_list);
|
|
}
|
|
|
|
/*
|
|
* Turn all commands on command ring with status set to "aborted" to no-op trbs.
|
|
* If there are other commands waiting then restart the ring and kick the timer.
|
|
* This must be called with command ring stopped and xhci->lock held.
|
|
*/
|
|
static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
|
|
struct xhci_command *cur_cmd)
|
|
{
|
|
struct xhci_command *i_cmd;
|
|
|
|
/* Turn all aborted commands in list to no-ops, then restart */
|
|
list_for_each_entry(i_cmd, &xhci->cmd_list, cmd_list) {
|
|
|
|
if (i_cmd->status != COMP_COMMAND_ABORTED)
|
|
continue;
|
|
|
|
i_cmd->status = COMP_COMMAND_RING_STOPPED;
|
|
|
|
xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
|
|
i_cmd->command_trb);
|
|
|
|
trb_to_noop(i_cmd->command_trb, TRB_CMD_NOOP);
|
|
|
|
/*
|
|
* caller waiting for completion is called when command
|
|
* completion event is received for these no-op commands
|
|
*/
|
|
}
|
|
|
|
xhci->cmd_ring_state = CMD_RING_STATE_RUNNING;
|
|
|
|
/* ring command ring doorbell to restart the command ring */
|
|
if ((xhci->cmd_ring->dequeue != xhci->cmd_ring->enqueue) &&
|
|
!(xhci->xhc_state & XHCI_STATE_DYING)) {
|
|
xhci->current_cmd = cur_cmd;
|
|
xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
|
|
xhci_ring_cmd_db(xhci);
|
|
}
|
|
}
|
|
|
|
/* Must be called with xhci->lock held, releases and aquires lock back */
|
|
static int xhci_abort_cmd_ring(struct xhci_hcd *xhci, unsigned long flags)
|
|
{
|
|
struct xhci_segment *new_seg = xhci->cmd_ring->deq_seg;
|
|
union xhci_trb *new_deq = xhci->cmd_ring->dequeue;
|
|
u64 crcr;
|
|
int ret;
|
|
|
|
xhci_dbg(xhci, "Abort command ring\n");
|
|
|
|
reinit_completion(&xhci->cmd_ring_stop_completion);
|
|
|
|
/*
|
|
* The control bits like command stop, abort are located in lower
|
|
* dword of the command ring control register.
|
|
* Some controllers require all 64 bits to be written to abort the ring.
|
|
* Make sure the upper dword is valid, pointing to the next command,
|
|
* avoiding corrupting the command ring pointer in case the command ring
|
|
* is stopped by the time the upper dword is written.
|
|
*/
|
|
next_trb(xhci, NULL, &new_seg, &new_deq);
|
|
if (trb_is_link(new_deq))
|
|
next_trb(xhci, NULL, &new_seg, &new_deq);
|
|
|
|
crcr = xhci_trb_virt_to_dma(new_seg, new_deq);
|
|
xhci_write_64(xhci, crcr | CMD_RING_ABORT, &xhci->op_regs->cmd_ring);
|
|
|
|
/* Section 4.6.1.2 of xHCI 1.0 spec says software should also time the
|
|
* completion of the Command Abort operation. If CRR is not negated in 5
|
|
* seconds then driver handles it as if host died (-ENODEV).
|
|
* In the future we should distinguish between -ENODEV and -ETIMEDOUT
|
|
* and try to recover a -ETIMEDOUT with a host controller reset.
|
|
*/
|
|
ret = xhci_handshake(&xhci->op_regs->cmd_ring,
|
|
CMD_RING_RUNNING, 0, 5 * 1000 * 1000);
|
|
if (ret < 0) {
|
|
xhci_err(xhci, "Abort failed to stop command ring: %d\n", ret);
|
|
xhci_halt(xhci);
|
|
xhci_hc_died(xhci);
|
|
return ret;
|
|
}
|
|
/*
|
|
* Writing the CMD_RING_ABORT bit should cause a cmd completion event,
|
|
* however on some host hw the CMD_RING_RUNNING bit is correctly cleared
|
|
* but the completion event in never sent. Wait 2 secs (arbitrary
|
|
* number) to handle those cases after negation of CMD_RING_RUNNING.
|
|
*/
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
ret = wait_for_completion_timeout(&xhci->cmd_ring_stop_completion,
|
|
msecs_to_jiffies(2000));
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
if (!ret) {
|
|
xhci_dbg(xhci, "No stop event for abort, ring start fail?\n");
|
|
xhci_cleanup_command_queue(xhci);
|
|
} else {
|
|
xhci_handle_stopped_cmd_ring(xhci, xhci_next_queued_cmd(xhci));
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void xhci_ring_ep_doorbell(struct xhci_hcd *xhci,
|
|
unsigned int slot_id,
|
|
unsigned int ep_index,
|
|
unsigned int stream_id)
|
|
{
|
|
__le32 __iomem *db_addr = &xhci->dba->doorbell[slot_id];
|
|
struct xhci_virt_ep *ep = &xhci->devs[slot_id]->eps[ep_index];
|
|
unsigned int ep_state = ep->ep_state;
|
|
|
|
/* Don't ring the doorbell for this endpoint if there are pending
|
|
* cancellations because we don't want to interrupt processing.
|
|
* We don't want to restart any stream rings if there's a set dequeue
|
|
* pointer command pending because the device can choose to start any
|
|
* stream once the endpoint is on the HW schedule.
|
|
*/
|
|
if ((ep_state & EP_STOP_CMD_PENDING) || (ep_state & SET_DEQ_PENDING) ||
|
|
(ep_state & EP_HALTED) || (ep_state & EP_CLEARING_TT))
|
|
return;
|
|
|
|
trace_xhci_ring_ep_doorbell(slot_id, DB_VALUE(ep_index, stream_id));
|
|
|
|
writel(DB_VALUE(ep_index, stream_id), db_addr);
|
|
/* flush the write */
|
|
readl(db_addr);
|
|
}
|
|
|
|
/* Ring the doorbell for any rings with pending URBs */
|
|
static void ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
|
|
unsigned int slot_id,
|
|
unsigned int ep_index)
|
|
{
|
|
unsigned int stream_id;
|
|
struct xhci_virt_ep *ep;
|
|
|
|
ep = &xhci->devs[slot_id]->eps[ep_index];
|
|
|
|
/* A ring has pending URBs if its TD list is not empty */
|
|
if (!(ep->ep_state & EP_HAS_STREAMS)) {
|
|
if (ep->ring && !(list_empty(&ep->ring->td_list)))
|
|
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, 0);
|
|
return;
|
|
}
|
|
|
|
for (stream_id = 1; stream_id < ep->stream_info->num_streams;
|
|
stream_id++) {
|
|
struct xhci_stream_info *stream_info = ep->stream_info;
|
|
if (!list_empty(&stream_info->stream_rings[stream_id]->td_list))
|
|
xhci_ring_ep_doorbell(xhci, slot_id, ep_index,
|
|
stream_id);
|
|
}
|
|
}
|
|
|
|
void xhci_ring_doorbell_for_active_rings(struct xhci_hcd *xhci,
|
|
unsigned int slot_id,
|
|
unsigned int ep_index)
|
|
{
|
|
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
|
|
}
|
|
|
|
static struct xhci_virt_ep *xhci_get_virt_ep(struct xhci_hcd *xhci,
|
|
unsigned int slot_id,
|
|
unsigned int ep_index)
|
|
{
|
|
if (slot_id == 0 || slot_id >= MAX_HC_SLOTS) {
|
|
xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
|
|
return NULL;
|
|
}
|
|
if (ep_index >= EP_CTX_PER_DEV) {
|
|
xhci_warn(xhci, "Invalid endpoint index %u\n", ep_index);
|
|
return NULL;
|
|
}
|
|
if (!xhci->devs[slot_id]) {
|
|
xhci_warn(xhci, "No xhci virt device for slot_id %u\n", slot_id);
|
|
return NULL;
|
|
}
|
|
|
|
return &xhci->devs[slot_id]->eps[ep_index];
|
|
}
|
|
|
|
static struct xhci_ring *xhci_virt_ep_to_ring(struct xhci_hcd *xhci,
|
|
struct xhci_virt_ep *ep,
|
|
unsigned int stream_id)
|
|
{
|
|
/* common case, no streams */
|
|
if (!(ep->ep_state & EP_HAS_STREAMS))
|
|
return ep->ring;
|
|
|
|
if (!ep->stream_info)
|
|
return NULL;
|
|
|
|
if (stream_id == 0 || stream_id >= ep->stream_info->num_streams) {
|
|
xhci_warn(xhci, "Invalid stream_id %u request for slot_id %u ep_index %u\n",
|
|
stream_id, ep->vdev->slot_id, ep->ep_index);
|
|
return NULL;
|
|
}
|
|
|
|
return ep->stream_info->stream_rings[stream_id];
|
|
}
|
|
|
|
/* Get the right ring for the given slot_id, ep_index and stream_id.
|
|
* If the endpoint supports streams, boundary check the URB's stream ID.
|
|
* If the endpoint doesn't support streams, return the singular endpoint ring.
|
|
*/
|
|
struct xhci_ring *xhci_triad_to_transfer_ring(struct xhci_hcd *xhci,
|
|
unsigned int slot_id, unsigned int ep_index,
|
|
unsigned int stream_id)
|
|
{
|
|
struct xhci_virt_ep *ep;
|
|
|
|
ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
|
|
if (!ep)
|
|
return NULL;
|
|
|
|
return xhci_virt_ep_to_ring(xhci, ep, stream_id);
|
|
}
|
|
|
|
|
|
/*
|
|
* Get the hw dequeue pointer xHC stopped on, either directly from the
|
|
* endpoint context, or if streams are in use from the stream context.
|
|
* The returned hw_dequeue contains the lowest four bits with cycle state
|
|
* and possbile stream context type.
|
|
*/
|
|
static u64 xhci_get_hw_deq(struct xhci_hcd *xhci, struct xhci_virt_device *vdev,
|
|
unsigned int ep_index, unsigned int stream_id)
|
|
{
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
struct xhci_stream_ctx *st_ctx;
|
|
struct xhci_virt_ep *ep;
|
|
|
|
ep = &vdev->eps[ep_index];
|
|
|
|
if (ep->ep_state & EP_HAS_STREAMS) {
|
|
st_ctx = &ep->stream_info->stream_ctx_array[stream_id];
|
|
return le64_to_cpu(st_ctx->stream_ring);
|
|
}
|
|
ep_ctx = xhci_get_ep_ctx(xhci, vdev->out_ctx, ep_index);
|
|
return le64_to_cpu(ep_ctx->deq);
|
|
}
|
|
|
|
static int xhci_move_dequeue_past_td(struct xhci_hcd *xhci,
|
|
unsigned int slot_id, unsigned int ep_index,
|
|
unsigned int stream_id, struct xhci_td *td)
|
|
{
|
|
struct xhci_virt_device *dev = xhci->devs[slot_id];
|
|
struct xhci_virt_ep *ep = &dev->eps[ep_index];
|
|
struct xhci_ring *ep_ring;
|
|
struct xhci_command *cmd;
|
|
struct xhci_segment *new_seg;
|
|
struct xhci_segment *halted_seg = NULL;
|
|
union xhci_trb *new_deq;
|
|
int new_cycle;
|
|
union xhci_trb *halted_trb;
|
|
int index = 0;
|
|
dma_addr_t addr;
|
|
u64 hw_dequeue;
|
|
bool cycle_found = false;
|
|
bool td_last_trb_found = false;
|
|
u32 trb_sct = 0;
|
|
int ret;
|
|
|
|
ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id,
|
|
ep_index, stream_id);
|
|
if (!ep_ring) {
|
|
xhci_warn(xhci, "WARN can't find new dequeue, invalid stream ID %u\n",
|
|
stream_id);
|
|
return -ENODEV;
|
|
}
|
|
/*
|
|
* A cancelled TD can complete with a stall if HW cached the trb.
|
|
* In this case driver can't find td, but if the ring is empty we
|
|
* can move the dequeue pointer to the current enqueue position.
|
|
* We shouldn't hit this anymore as cached cancelled TRBs are given back
|
|
* after clearing the cache, but be on the safe side and keep it anyway
|
|
*/
|
|
if (!td) {
|
|
if (list_empty(&ep_ring->td_list)) {
|
|
new_seg = ep_ring->enq_seg;
|
|
new_deq = ep_ring->enqueue;
|
|
new_cycle = ep_ring->cycle_state;
|
|
xhci_dbg(xhci, "ep ring empty, Set new dequeue = enqueue");
|
|
goto deq_found;
|
|
} else {
|
|
xhci_warn(xhci, "Can't find new dequeue state, missing td\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
hw_dequeue = xhci_get_hw_deq(xhci, dev, ep_index, stream_id);
|
|
new_seg = ep_ring->deq_seg;
|
|
new_deq = ep_ring->dequeue;
|
|
|
|
/*
|
|
* Quirk: xHC write-back of the DCS field in the hardware dequeue
|
|
* pointer is wrong - use the cycle state of the TRB pointed to by
|
|
* the dequeue pointer.
|
|
*/
|
|
if (xhci->quirks & XHCI_EP_CTX_BROKEN_DCS &&
|
|
!(ep->ep_state & EP_HAS_STREAMS))
|
|
halted_seg = trb_in_td(xhci, td->start_seg,
|
|
td->first_trb, td->last_trb,
|
|
hw_dequeue & ~0xf, false);
|
|
if (halted_seg) {
|
|
index = ((dma_addr_t)(hw_dequeue & ~0xf) - halted_seg->dma) /
|
|
sizeof(*halted_trb);
|
|
halted_trb = &halted_seg->trbs[index];
|
|
new_cycle = halted_trb->generic.field[3] & 0x1;
|
|
xhci_dbg(xhci, "Endpoint DCS = %d TRB index = %d cycle = %d\n",
|
|
(u8)(hw_dequeue & 0x1), index, new_cycle);
|
|
} else {
|
|
new_cycle = hw_dequeue & 0x1;
|
|
}
|
|
|
|
/*
|
|
* We want to find the pointer, segment and cycle state of the new trb
|
|
* (the one after current TD's last_trb). We know the cycle state at
|
|
* hw_dequeue, so walk the ring until both hw_dequeue and last_trb are
|
|
* found.
|
|
*/
|
|
do {
|
|
if (!cycle_found && xhci_trb_virt_to_dma(new_seg, new_deq)
|
|
== (dma_addr_t)(hw_dequeue & ~0xf)) {
|
|
cycle_found = true;
|
|
if (td_last_trb_found)
|
|
break;
|
|
}
|
|
if (new_deq == td->last_trb)
|
|
td_last_trb_found = true;
|
|
|
|
if (cycle_found && trb_is_link(new_deq) &&
|
|
link_trb_toggles_cycle(new_deq))
|
|
new_cycle ^= 0x1;
|
|
|
|
next_trb(xhci, ep_ring, &new_seg, &new_deq);
|
|
|
|
/* Search wrapped around, bail out */
|
|
if (new_deq == ep->ring->dequeue) {
|
|
xhci_err(xhci, "Error: Failed finding new dequeue state\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
} while (!cycle_found || !td_last_trb_found);
|
|
|
|
deq_found:
|
|
|
|
/* Don't update the ring cycle state for the producer (us). */
|
|
addr = xhci_trb_virt_to_dma(new_seg, new_deq);
|
|
if (addr == 0) {
|
|
xhci_warn(xhci, "Can't find dma of new dequeue ptr\n");
|
|
xhci_warn(xhci, "deq seg = %p, deq ptr = %p\n", new_seg, new_deq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if ((ep->ep_state & SET_DEQ_PENDING)) {
|
|
xhci_warn(xhci, "Set TR Deq already pending, don't submit for 0x%pad\n",
|
|
&addr);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* This function gets called from contexts where it cannot sleep */
|
|
cmd = xhci_alloc_command(xhci, false, GFP_ATOMIC);
|
|
if (!cmd) {
|
|
xhci_warn(xhci, "Can't alloc Set TR Deq cmd 0x%pad\n", &addr);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (stream_id)
|
|
trb_sct = SCT_FOR_TRB(SCT_PRI_TR);
|
|
ret = queue_command(xhci, cmd,
|
|
lower_32_bits(addr) | trb_sct | new_cycle,
|
|
upper_32_bits(addr),
|
|
STREAM_ID_FOR_TRB(stream_id), SLOT_ID_FOR_TRB(slot_id) |
|
|
EP_ID_FOR_TRB(ep_index) | TRB_TYPE(TRB_SET_DEQ), false);
|
|
if (ret < 0) {
|
|
xhci_free_command(xhci, cmd);
|
|
return ret;
|
|
}
|
|
ep->queued_deq_seg = new_seg;
|
|
ep->queued_deq_ptr = new_deq;
|
|
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
|
|
"Set TR Deq ptr 0x%llx, cycle %u\n", addr, new_cycle);
|
|
|
|
/* Stop the TD queueing code from ringing the doorbell until
|
|
* this command completes. The HC won't set the dequeue pointer
|
|
* if the ring is running, and ringing the doorbell starts the
|
|
* ring running.
|
|
*/
|
|
ep->ep_state |= SET_DEQ_PENDING;
|
|
xhci_ring_cmd_db(xhci);
|
|
return 0;
|
|
}
|
|
|
|
/* flip_cycle means flip the cycle bit of all but the first and last TRB.
|
|
* (The last TRB actually points to the ring enqueue pointer, which is not part
|
|
* of this TD.) This is used to remove partially enqueued isoc TDs from a ring.
|
|
*/
|
|
static void td_to_noop(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
|
|
struct xhci_td *td, bool flip_cycle)
|
|
{
|
|
struct xhci_segment *seg = td->start_seg;
|
|
union xhci_trb *trb = td->first_trb;
|
|
|
|
while (1) {
|
|
trb_to_noop(trb, TRB_TR_NOOP);
|
|
|
|
/* flip cycle if asked to */
|
|
if (flip_cycle && trb != td->first_trb && trb != td->last_trb)
|
|
trb->generic.field[3] ^= cpu_to_le32(TRB_CYCLE);
|
|
|
|
if (trb == td->last_trb)
|
|
break;
|
|
|
|
next_trb(xhci, ep_ring, &seg, &trb);
|
|
}
|
|
}
|
|
|
|
static void xhci_stop_watchdog_timer_in_irq(struct xhci_hcd *xhci,
|
|
struct xhci_virt_ep *ep)
|
|
{
|
|
ep->ep_state &= ~EP_STOP_CMD_PENDING;
|
|
/* Can't del_timer_sync in interrupt */
|
|
del_timer(&ep->stop_cmd_timer);
|
|
}
|
|
|
|
/*
|
|
* Must be called with xhci->lock held in interrupt context,
|
|
* releases and re-acquires xhci->lock
|
|
*/
|
|
static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
|
|
struct xhci_td *cur_td, int status)
|
|
{
|
|
struct urb *urb = cur_td->urb;
|
|
struct urb_priv *urb_priv = urb->hcpriv;
|
|
struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
|
|
|
|
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
|
|
xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs--;
|
|
if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
|
|
if (xhci->quirks & XHCI_AMD_PLL_FIX)
|
|
usb_amd_quirk_pll_enable();
|
|
}
|
|
}
|
|
xhci_urb_free_priv(urb_priv);
|
|
usb_hcd_unlink_urb_from_ep(hcd, urb);
|
|
trace_xhci_urb_giveback(urb);
|
|
usb_hcd_giveback_urb(hcd, urb, status);
|
|
}
|
|
|
|
static void xhci_unmap_td_bounce_buffer(struct xhci_hcd *xhci,
|
|
struct xhci_ring *ring, struct xhci_td *td)
|
|
{
|
|
struct device *dev = xhci_to_hcd(xhci)->self.controller;
|
|
struct xhci_segment *seg = td->bounce_seg;
|
|
struct urb *urb = td->urb;
|
|
size_t len;
|
|
|
|
if (!ring || !seg || !urb)
|
|
return;
|
|
|
|
if (usb_urb_dir_out(urb)) {
|
|
dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
|
|
DMA_TO_DEVICE);
|
|
return;
|
|
}
|
|
|
|
dma_unmap_single(dev, seg->bounce_dma, ring->bounce_buf_len,
|
|
DMA_FROM_DEVICE);
|
|
/* for in tranfers we need to copy the data from bounce to sg */
|
|
if (urb->num_sgs) {
|
|
len = sg_pcopy_from_buffer(urb->sg, urb->num_sgs, seg->bounce_buf,
|
|
seg->bounce_len, seg->bounce_offs);
|
|
if (len != seg->bounce_len)
|
|
xhci_warn(xhci, "WARN Wrong bounce buffer read length: %zu != %d\n",
|
|
len, seg->bounce_len);
|
|
} else {
|
|
memcpy(urb->transfer_buffer + seg->bounce_offs, seg->bounce_buf,
|
|
seg->bounce_len);
|
|
}
|
|
seg->bounce_len = 0;
|
|
seg->bounce_offs = 0;
|
|
}
|
|
|
|
static int xhci_td_cleanup(struct xhci_hcd *xhci, struct xhci_td *td,
|
|
struct xhci_ring *ep_ring, int status)
|
|
{
|
|
struct urb *urb = NULL;
|
|
|
|
/* Clean up the endpoint's TD list */
|
|
urb = td->urb;
|
|
|
|
/* if a bounce buffer was used to align this td then unmap it */
|
|
xhci_unmap_td_bounce_buffer(xhci, ep_ring, td);
|
|
|
|
/* Do one last check of the actual transfer length.
|
|
* If the host controller said we transferred more data than the buffer
|
|
* length, urb->actual_length will be a very big number (since it's
|
|
* unsigned). Play it safe and say we didn't transfer anything.
|
|
*/
|
|
if (urb->actual_length > urb->transfer_buffer_length) {
|
|
xhci_warn(xhci, "URB req %u and actual %u transfer length mismatch\n",
|
|
urb->transfer_buffer_length, urb->actual_length);
|
|
urb->actual_length = 0;
|
|
status = 0;
|
|
}
|
|
/* TD might be removed from td_list if we are giving back a cancelled URB */
|
|
if (!list_empty(&td->td_list))
|
|
list_del_init(&td->td_list);
|
|
/* Giving back a cancelled URB, or if a slated TD completed anyway */
|
|
if (!list_empty(&td->cancelled_td_list))
|
|
list_del_init(&td->cancelled_td_list);
|
|
|
|
inc_td_cnt(urb);
|
|
/* Giveback the urb when all the tds are completed */
|
|
if (last_td_in_urb(td)) {
|
|
if ((urb->actual_length != urb->transfer_buffer_length &&
|
|
(urb->transfer_flags & URB_SHORT_NOT_OK)) ||
|
|
(status != 0 && !usb_endpoint_xfer_isoc(&urb->ep->desc)))
|
|
xhci_dbg(xhci, "Giveback URB %p, len = %d, expected = %d, status = %d\n",
|
|
urb, urb->actual_length,
|
|
urb->transfer_buffer_length, status);
|
|
|
|
/* set isoc urb status to 0 just as EHCI, UHCI, and OHCI */
|
|
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
|
|
status = 0;
|
|
xhci_giveback_urb_in_irq(xhci, td, status);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Complete the cancelled URBs we unlinked from td_list. */
|
|
static void xhci_giveback_invalidated_tds(struct xhci_virt_ep *ep)
|
|
{
|
|
struct xhci_ring *ring;
|
|
struct xhci_td *td, *tmp_td;
|
|
|
|
list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
|
|
cancelled_td_list) {
|
|
|
|
ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
|
|
|
|
if (td->cancel_status == TD_CLEARED) {
|
|
xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
|
|
__func__, td->urb);
|
|
xhci_td_cleanup(ep->xhci, td, ring, td->status);
|
|
} else {
|
|
xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
|
|
__func__, td->urb, td->cancel_status);
|
|
}
|
|
if (ep->xhci->xhc_state & XHCI_STATE_DYING)
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int xhci_reset_halted_ep(struct xhci_hcd *xhci, unsigned int slot_id,
|
|
unsigned int ep_index, enum xhci_ep_reset_type reset_type)
|
|
{
|
|
struct xhci_command *command;
|
|
int ret = 0;
|
|
|
|
command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
|
|
if (!command) {
|
|
ret = -ENOMEM;
|
|
goto done;
|
|
}
|
|
|
|
xhci_dbg(xhci, "%s-reset ep %u, slot %u\n",
|
|
(reset_type == EP_HARD_RESET) ? "Hard" : "Soft",
|
|
ep_index, slot_id);
|
|
|
|
ret = xhci_queue_reset_ep(xhci, command, slot_id, ep_index, reset_type);
|
|
done:
|
|
if (ret)
|
|
xhci_err(xhci, "ERROR queuing reset endpoint for slot %d ep_index %d, %d\n",
|
|
slot_id, ep_index, ret);
|
|
return ret;
|
|
}
|
|
|
|
static int xhci_handle_halted_endpoint(struct xhci_hcd *xhci,
|
|
struct xhci_virt_ep *ep, unsigned int stream_id,
|
|
struct xhci_td *td,
|
|
enum xhci_ep_reset_type reset_type)
|
|
{
|
|
unsigned int slot_id = ep->vdev->slot_id;
|
|
int err;
|
|
|
|
/*
|
|
* Avoid resetting endpoint if link is inactive. Can cause host hang.
|
|
* Device will be reset soon to recover the link so don't do anything
|
|
*/
|
|
if (ep->vdev->flags & VDEV_PORT_ERROR)
|
|
return -ENODEV;
|
|
|
|
/* add td to cancelled list and let reset ep handler take care of it */
|
|
if (reset_type == EP_HARD_RESET) {
|
|
ep->ep_state |= EP_HARD_CLEAR_TOGGLE;
|
|
if (td && list_empty(&td->cancelled_td_list)) {
|
|
list_add_tail(&td->cancelled_td_list, &ep->cancelled_td_list);
|
|
td->cancel_status = TD_HALTED;
|
|
}
|
|
}
|
|
|
|
if (ep->ep_state & EP_HALTED) {
|
|
xhci_dbg(xhci, "Reset ep command for ep_index %d already pending\n",
|
|
ep->ep_index);
|
|
return 0;
|
|
}
|
|
|
|
err = xhci_reset_halted_ep(xhci, slot_id, ep->ep_index, reset_type);
|
|
if (err)
|
|
return err;
|
|
|
|
ep->ep_state |= EP_HALTED;
|
|
|
|
xhci_ring_cmd_db(xhci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Fix up the ep ring first, so HW stops executing cancelled TDs.
|
|
* We have the xHCI lock, so nothing can modify this list until we drop it.
|
|
* We're also in the event handler, so we can't get re-interrupted if another
|
|
* Stop Endpoint command completes.
|
|
*
|
|
* only call this when ring is not in a running state
|
|
*/
|
|
|
|
static int xhci_invalidate_cancelled_tds(struct xhci_virt_ep *ep)
|
|
{
|
|
struct xhci_hcd *xhci;
|
|
struct xhci_td *td = NULL;
|
|
struct xhci_td *tmp_td = NULL;
|
|
struct xhci_td *cached_td = NULL;
|
|
struct xhci_ring *ring;
|
|
u64 hw_deq;
|
|
unsigned int slot_id = ep->vdev->slot_id;
|
|
int err;
|
|
|
|
xhci = ep->xhci;
|
|
|
|
list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
|
|
"Removing canceled TD starting at 0x%llx (dma) in stream %u URB %p",
|
|
(unsigned long long)xhci_trb_virt_to_dma(
|
|
td->start_seg, td->first_trb),
|
|
td->urb->stream_id, td->urb);
|
|
list_del_init(&td->td_list);
|
|
ring = xhci_urb_to_transfer_ring(xhci, td->urb);
|
|
if (!ring) {
|
|
xhci_warn(xhci, "WARN Cancelled URB %p has invalid stream ID %u.\n",
|
|
td->urb, td->urb->stream_id);
|
|
continue;
|
|
}
|
|
/*
|
|
* If a ring stopped on the TD we need to cancel then we have to
|
|
* move the xHC endpoint ring dequeue pointer past this TD.
|
|
* Rings halted due to STALL may show hw_deq is past the stalled
|
|
* TD, but still require a set TR Deq command to flush xHC cache.
|
|
*/
|
|
hw_deq = xhci_get_hw_deq(xhci, ep->vdev, ep->ep_index,
|
|
td->urb->stream_id);
|
|
hw_deq &= ~0xf;
|
|
|
|
if (td->cancel_status == TD_HALTED ||
|
|
trb_in_td(xhci, td->start_seg, td->first_trb, td->last_trb, hw_deq, false)) {
|
|
switch (td->cancel_status) {
|
|
case TD_CLEARED: /* TD is already no-op */
|
|
case TD_CLEARING_CACHE: /* set TR deq command already queued */
|
|
break;
|
|
case TD_DIRTY: /* TD is cached, clear it */
|
|
case TD_HALTED:
|
|
td->cancel_status = TD_CLEARING_CACHE;
|
|
if (cached_td)
|
|
/* FIXME stream case, several stopped rings */
|
|
xhci_dbg(xhci,
|
|
"Move dq past stream %u URB %p instead of stream %u URB %p\n",
|
|
td->urb->stream_id, td->urb,
|
|
cached_td->urb->stream_id, cached_td->urb);
|
|
cached_td = td;
|
|
break;
|
|
}
|
|
} else {
|
|
td_to_noop(xhci, ring, td, false);
|
|
td->cancel_status = TD_CLEARED;
|
|
}
|
|
}
|
|
|
|
/* If there's no need to move the dequeue pointer then we're done */
|
|
if (!cached_td)
|
|
return 0;
|
|
|
|
err = xhci_move_dequeue_past_td(xhci, slot_id, ep->ep_index,
|
|
cached_td->urb->stream_id,
|
|
cached_td);
|
|
if (err) {
|
|
/* Failed to move past cached td, just set cached TDs to no-op */
|
|
list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list, cancelled_td_list) {
|
|
if (td->cancel_status != TD_CLEARING_CACHE)
|
|
continue;
|
|
xhci_dbg(xhci, "Failed to clear cancelled cached URB %p, mark clear anyway\n",
|
|
td->urb);
|
|
td_to_noop(xhci, ring, td, false);
|
|
td->cancel_status = TD_CLEARED;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Returns the TD the endpoint ring halted on.
|
|
* Only call for non-running rings without streams.
|
|
*/
|
|
static struct xhci_td *find_halted_td(struct xhci_virt_ep *ep)
|
|
{
|
|
struct xhci_td *td;
|
|
u64 hw_deq;
|
|
|
|
if (!list_empty(&ep->ring->td_list)) { /* Not streams compatible */
|
|
hw_deq = xhci_get_hw_deq(ep->xhci, ep->vdev, ep->ep_index, 0);
|
|
hw_deq &= ~0xf;
|
|
td = list_first_entry(&ep->ring->td_list, struct xhci_td, td_list);
|
|
if (trb_in_td(ep->xhci, td->start_seg, td->first_trb,
|
|
td->last_trb, hw_deq, false))
|
|
return td;
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
/*
|
|
* When we get a command completion for a Stop Endpoint Command, we need to
|
|
* unlink any cancelled TDs from the ring. There are two ways to do that:
|
|
*
|
|
* 1. If the HW was in the middle of processing the TD that needs to be
|
|
* cancelled, then we must move the ring's dequeue pointer past the last TRB
|
|
* in the TD with a Set Dequeue Pointer Command.
|
|
* 2. Otherwise, we turn all the TRBs in the TD into No-op TRBs (with the chain
|
|
* bit cleared) so that the HW will skip over them.
|
|
*/
|
|
static void xhci_handle_cmd_stop_ep(struct xhci_hcd *xhci, int slot_id,
|
|
union xhci_trb *trb, u32 comp_code)
|
|
{
|
|
unsigned int ep_index;
|
|
struct xhci_virt_ep *ep;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
struct xhci_td *td = NULL;
|
|
enum xhci_ep_reset_type reset_type;
|
|
struct xhci_command *command;
|
|
int err;
|
|
|
|
if (unlikely(TRB_TO_SUSPEND_PORT(le32_to_cpu(trb->generic.field[3])))) {
|
|
if (!xhci->devs[slot_id])
|
|
xhci_warn(xhci, "Stop endpoint command completion for disabled slot %u\n",
|
|
slot_id);
|
|
return;
|
|
}
|
|
|
|
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
|
|
ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
|
|
if (!ep)
|
|
return;
|
|
|
|
ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
|
|
|
|
trace_xhci_handle_cmd_stop_ep(ep_ctx);
|
|
|
|
if (comp_code == COMP_CONTEXT_STATE_ERROR) {
|
|
/*
|
|
* If stop endpoint command raced with a halting endpoint we need to
|
|
* reset the host side endpoint first.
|
|
* If the TD we halted on isn't cancelled the TD should be given back
|
|
* with a proper error code, and the ring dequeue moved past the TD.
|
|
* If streams case we can't find hw_deq, or the TD we halted on so do a
|
|
* soft reset.
|
|
*
|
|
* Proper error code is unknown here, it would be -EPIPE if device side
|
|
* of enadpoit halted (aka STALL), and -EPROTO if not (transaction error)
|
|
* We use -EPROTO, if device is stalled it should return a stall error on
|
|
* next transfer, which then will return -EPIPE, and device side stall is
|
|
* noted and cleared by class driver.
|
|
*/
|
|
switch (GET_EP_CTX_STATE(ep_ctx)) {
|
|
case EP_STATE_HALTED:
|
|
xhci_dbg(xhci, "Stop ep completion raced with stall, reset ep\n");
|
|
if (ep->ep_state & EP_HAS_STREAMS) {
|
|
reset_type = EP_SOFT_RESET;
|
|
} else {
|
|
reset_type = EP_HARD_RESET;
|
|
td = find_halted_td(ep);
|
|
if (td)
|
|
td->status = -EPROTO;
|
|
}
|
|
/* reset ep, reset handler cleans up cancelled tds */
|
|
err = xhci_handle_halted_endpoint(xhci, ep, 0, td,
|
|
reset_type);
|
|
if (err)
|
|
break;
|
|
xhci_stop_watchdog_timer_in_irq(xhci, ep);
|
|
return;
|
|
case EP_STATE_RUNNING:
|
|
/* Race, HW handled stop ep cmd before ep was running */
|
|
xhci_dbg(xhci, "Stop ep completion ctx error, ep is running\n");
|
|
|
|
command = xhci_alloc_command(xhci, false, GFP_ATOMIC);
|
|
if (!command)
|
|
xhci_stop_watchdog_timer_in_irq(xhci, ep);
|
|
|
|
mod_timer(&ep->stop_cmd_timer,
|
|
jiffies + XHCI_STOP_EP_CMD_TIMEOUT * HZ);
|
|
xhci_queue_stop_endpoint(xhci, command, slot_id, ep_index, 0);
|
|
xhci_ring_cmd_db(xhci);
|
|
|
|
return;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
/* will queue a set TR deq if stopped on a cancelled, uncleared TD */
|
|
xhci_invalidate_cancelled_tds(ep);
|
|
xhci_stop_watchdog_timer_in_irq(xhci, ep);
|
|
|
|
/* Otherwise ring the doorbell(s) to restart queued transfers */
|
|
xhci_giveback_invalidated_tds(ep);
|
|
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
|
|
}
|
|
|
|
static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring)
|
|
{
|
|
struct xhci_td *cur_td;
|
|
struct xhci_td *tmp;
|
|
|
|
list_for_each_entry_safe(cur_td, tmp, &ring->td_list, td_list) {
|
|
list_del_init(&cur_td->td_list);
|
|
|
|
if (!list_empty(&cur_td->cancelled_td_list))
|
|
list_del_init(&cur_td->cancelled_td_list);
|
|
|
|
xhci_unmap_td_bounce_buffer(xhci, ring, cur_td);
|
|
|
|
inc_td_cnt(cur_td->urb);
|
|
if (last_td_in_urb(cur_td))
|
|
xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
|
|
}
|
|
}
|
|
|
|
static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
|
|
int slot_id, int ep_index)
|
|
{
|
|
struct xhci_td *cur_td;
|
|
struct xhci_td *tmp;
|
|
struct xhci_virt_ep *ep;
|
|
struct xhci_ring *ring;
|
|
|
|
ep = &xhci->devs[slot_id]->eps[ep_index];
|
|
if ((ep->ep_state & EP_HAS_STREAMS) ||
|
|
(ep->ep_state & EP_GETTING_NO_STREAMS)) {
|
|
int stream_id;
|
|
|
|
for (stream_id = 1; stream_id < ep->stream_info->num_streams;
|
|
stream_id++) {
|
|
ring = ep->stream_info->stream_rings[stream_id];
|
|
if (!ring)
|
|
continue;
|
|
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
|
|
"Killing URBs for slot ID %u, ep index %u, stream %u",
|
|
slot_id, ep_index, stream_id);
|
|
xhci_kill_ring_urbs(xhci, ring);
|
|
}
|
|
} else {
|
|
ring = ep->ring;
|
|
if (!ring)
|
|
return;
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
|
|
"Killing URBs for slot ID %u, ep index %u",
|
|
slot_id, ep_index);
|
|
xhci_kill_ring_urbs(xhci, ring);
|
|
}
|
|
|
|
list_for_each_entry_safe(cur_td, tmp, &ep->cancelled_td_list,
|
|
cancelled_td_list) {
|
|
list_del_init(&cur_td->cancelled_td_list);
|
|
inc_td_cnt(cur_td->urb);
|
|
|
|
if (last_td_in_urb(cur_td))
|
|
xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* host controller died, register read returns 0xffffffff
|
|
* Complete pending commands, mark them ABORTED.
|
|
* URBs need to be given back as usb core might be waiting with device locks
|
|
* held for the URBs to finish during device disconnect, blocking host remove.
|
|
*
|
|
* Call with xhci->lock held.
|
|
* lock is relased and re-acquired while giving back urb.
|
|
*/
|
|
void xhci_hc_died(struct xhci_hcd *xhci)
|
|
{
|
|
int i, j;
|
|
|
|
if (xhci->xhc_state & XHCI_STATE_DYING)
|
|
return;
|
|
|
|
xhci_err(xhci, "xHCI host controller not responding, assume dead\n");
|
|
xhci->xhc_state |= XHCI_STATE_DYING;
|
|
|
|
xhci_cleanup_command_queue(xhci);
|
|
|
|
/* return any pending urbs, remove may be waiting for them */
|
|
for (i = 0; i <= HCS_MAX_SLOTS(xhci->hcs_params1); i++) {
|
|
if (!xhci->devs[i])
|
|
continue;
|
|
for (j = 0; j < 31; j++)
|
|
xhci_kill_endpoint_urbs(xhci, i, j);
|
|
}
|
|
|
|
/* inform usb core hc died if PCI remove isn't already handling it */
|
|
if (!(xhci->xhc_state & XHCI_STATE_REMOVING))
|
|
usb_hc_died(xhci_to_hcd(xhci));
|
|
}
|
|
|
|
/* Watchdog timer function for when a stop endpoint command fails to complete.
|
|
* In this case, we assume the host controller is broken or dying or dead. The
|
|
* host may still be completing some other events, so we have to be careful to
|
|
* let the event ring handler and the URB dequeueing/enqueueing functions know
|
|
* through xhci->state.
|
|
*
|
|
* The timer may also fire if the host takes a very long time to respond to the
|
|
* command, and the stop endpoint command completion handler cannot delete the
|
|
* timer before the timer function is called. Another endpoint cancellation may
|
|
* sneak in before the timer function can grab the lock, and that may queue
|
|
* another stop endpoint command and add the timer back. So we cannot use a
|
|
* simple flag to say whether there is a pending stop endpoint command for a
|
|
* particular endpoint.
|
|
*
|
|
* Instead we use a combination of that flag and checking if a new timer is
|
|
* pending.
|
|
*/
|
|
void xhci_stop_endpoint_command_watchdog(struct timer_list *t)
|
|
{
|
|
struct xhci_virt_ep *ep = from_timer(ep, t, stop_cmd_timer);
|
|
struct xhci_hcd *xhci = ep->xhci;
|
|
unsigned long flags;
|
|
u32 usbsts;
|
|
char str[XHCI_MSG_MAX];
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
|
|
/* bail out if cmd completed but raced with stop ep watchdog timer.*/
|
|
if (!(ep->ep_state & EP_STOP_CMD_PENDING) ||
|
|
timer_pending(&ep->stop_cmd_timer)) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_dbg(xhci, "Stop EP timer raced with cmd completion, exit");
|
|
return;
|
|
}
|
|
usbsts = readl(&xhci->op_regs->status);
|
|
|
|
xhci_warn(xhci, "xHCI host not responding to stop endpoint command.\n");
|
|
xhci_warn(xhci, "USBSTS:%s\n", xhci_decode_usbsts(str, usbsts));
|
|
|
|
ep->ep_state &= ~EP_STOP_CMD_PENDING;
|
|
|
|
xhci_halt(xhci);
|
|
|
|
/*
|
|
* handle a stop endpoint cmd timeout as if host died (-ENODEV).
|
|
* In the future we could distinguish between -ENODEV and -ETIMEDOUT
|
|
* and try to recover a -ETIMEDOUT with a host controller reset
|
|
*/
|
|
xhci_hc_died(xhci);
|
|
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
|
|
"xHCI host controller is dead.");
|
|
}
|
|
|
|
static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci,
|
|
struct xhci_virt_device *dev,
|
|
struct xhci_ring *ep_ring,
|
|
unsigned int ep_index)
|
|
{
|
|
union xhci_trb *dequeue_temp;
|
|
int num_trbs_free_temp;
|
|
bool revert = false;
|
|
|
|
num_trbs_free_temp = ep_ring->num_trbs_free;
|
|
dequeue_temp = ep_ring->dequeue;
|
|
|
|
/* If we get two back-to-back stalls, and the first stalled transfer
|
|
* ends just before a link TRB, the dequeue pointer will be left on
|
|
* the link TRB by the code in the while loop. So we have to update
|
|
* the dequeue pointer one segment further, or we'll jump off
|
|
* the segment into la-la-land.
|
|
*/
|
|
if (trb_is_link(ep_ring->dequeue)) {
|
|
ep_ring->deq_seg = ep_ring->deq_seg->next;
|
|
ep_ring->dequeue = ep_ring->deq_seg->trbs;
|
|
}
|
|
|
|
while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) {
|
|
/* We have more usable TRBs */
|
|
ep_ring->num_trbs_free++;
|
|
ep_ring->dequeue++;
|
|
if (trb_is_link(ep_ring->dequeue)) {
|
|
if (ep_ring->dequeue ==
|
|
dev->eps[ep_index].queued_deq_ptr)
|
|
break;
|
|
ep_ring->deq_seg = ep_ring->deq_seg->next;
|
|
ep_ring->dequeue = ep_ring->deq_seg->trbs;
|
|
}
|
|
if (ep_ring->dequeue == dequeue_temp) {
|
|
revert = true;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (revert) {
|
|
xhci_dbg(xhci, "Unable to find new dequeue pointer\n");
|
|
ep_ring->num_trbs_free = num_trbs_free_temp;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* When we get a completion for a Set Transfer Ring Dequeue Pointer command,
|
|
* we need to clear the set deq pending flag in the endpoint ring state, so that
|
|
* the TD queueing code can ring the doorbell again. We also need to ring the
|
|
* endpoint doorbell to restart the ring, but only if there aren't more
|
|
* cancellations pending.
|
|
*/
|
|
static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id,
|
|
union xhci_trb *trb, u32 cmd_comp_code)
|
|
{
|
|
unsigned int ep_index;
|
|
unsigned int stream_id;
|
|
struct xhci_ring *ep_ring;
|
|
struct xhci_virt_ep *ep;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
struct xhci_td *td, *tmp_td;
|
|
|
|
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
|
|
stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2]));
|
|
ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
|
|
if (!ep)
|
|
return;
|
|
|
|
ep_ring = xhci_virt_ep_to_ring(xhci, ep, stream_id);
|
|
if (!ep_ring) {
|
|
xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n",
|
|
stream_id);
|
|
/* XXX: Harmless??? */
|
|
goto cleanup;
|
|
}
|
|
|
|
ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
|
|
slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
|
|
trace_xhci_handle_cmd_set_deq(slot_ctx);
|
|
trace_xhci_handle_cmd_set_deq_ep(ep_ctx);
|
|
|
|
if (cmd_comp_code != COMP_SUCCESS) {
|
|
unsigned int ep_state;
|
|
unsigned int slot_state;
|
|
|
|
switch (cmd_comp_code) {
|
|
case COMP_TRB_ERROR:
|
|
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n");
|
|
break;
|
|
case COMP_CONTEXT_STATE_ERROR:
|
|
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n");
|
|
ep_state = GET_EP_CTX_STATE(ep_ctx);
|
|
slot_state = le32_to_cpu(slot_ctx->dev_state);
|
|
slot_state = GET_SLOT_STATE(slot_state);
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
|
|
"Slot state = %u, EP state = %u",
|
|
slot_state, ep_state);
|
|
break;
|
|
case COMP_SLOT_NOT_ENABLED_ERROR:
|
|
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n",
|
|
slot_id);
|
|
break;
|
|
default:
|
|
xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n",
|
|
cmd_comp_code);
|
|
break;
|
|
}
|
|
/* OK what do we do now? The endpoint state is hosed, and we
|
|
* should never get to this point if the synchronization between
|
|
* queueing, and endpoint state are correct. This might happen
|
|
* if the device gets disconnected after we've finished
|
|
* cancelling URBs, which might not be an error...
|
|
*/
|
|
} else {
|
|
u64 deq;
|
|
/* 4.6.10 deq ptr is written to the stream ctx for streams */
|
|
if (ep->ep_state & EP_HAS_STREAMS) {
|
|
struct xhci_stream_ctx *ctx =
|
|
&ep->stream_info->stream_ctx_array[stream_id];
|
|
deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK;
|
|
} else {
|
|
deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK;
|
|
}
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
|
|
"Successful Set TR Deq Ptr cmd, deq = @%08llx", deq);
|
|
if (xhci_trb_virt_to_dma(ep->queued_deq_seg,
|
|
ep->queued_deq_ptr) == deq) {
|
|
/* Update the ring's dequeue segment and dequeue pointer
|
|
* to reflect the new position.
|
|
*/
|
|
update_ring_for_set_deq_completion(xhci, ep->vdev,
|
|
ep_ring, ep_index);
|
|
} else {
|
|
xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n");
|
|
xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n",
|
|
ep->queued_deq_seg, ep->queued_deq_ptr);
|
|
}
|
|
}
|
|
/* HW cached TDs cleared from cache, give them back */
|
|
list_for_each_entry_safe(td, tmp_td, &ep->cancelled_td_list,
|
|
cancelled_td_list) {
|
|
ep_ring = xhci_urb_to_transfer_ring(ep->xhci, td->urb);
|
|
if (td->cancel_status == TD_CLEARING_CACHE) {
|
|
td->cancel_status = TD_CLEARED;
|
|
xhci_dbg(ep->xhci, "%s: Giveback cancelled URB %p TD\n",
|
|
__func__, td->urb);
|
|
xhci_td_cleanup(ep->xhci, td, ep_ring, td->status);
|
|
} else {
|
|
xhci_dbg(ep->xhci, "%s: Keep cancelled URB %p TD as cancel_status is %d\n",
|
|
__func__, td->urb, td->cancel_status);
|
|
}
|
|
}
|
|
cleanup:
|
|
ep->ep_state &= ~SET_DEQ_PENDING;
|
|
ep->queued_deq_seg = NULL;
|
|
ep->queued_deq_ptr = NULL;
|
|
/* Restart any rings with pending URBs */
|
|
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
|
|
}
|
|
|
|
static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id,
|
|
union xhci_trb *trb, u32 cmd_comp_code)
|
|
{
|
|
struct xhci_virt_ep *ep;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
unsigned int ep_index;
|
|
|
|
ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3]));
|
|
ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
|
|
if (!ep)
|
|
return;
|
|
|
|
ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
|
|
trace_xhci_handle_cmd_reset_ep(ep_ctx);
|
|
|
|
/* This command will only fail if the endpoint wasn't halted,
|
|
* but we don't care.
|
|
*/
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
|
|
"Ignoring reset ep completion code of %u", cmd_comp_code);
|
|
|
|
/* Cleanup cancelled TDs as ep is stopped. May queue a Set TR Deq cmd */
|
|
xhci_invalidate_cancelled_tds(ep);
|
|
|
|
if (xhci->quirks & XHCI_RESET_EP_QUIRK)
|
|
xhci_dbg(xhci, "Note: Removed workaround to queue config ep for this hw");
|
|
/* Clear our internal halted state */
|
|
ep->ep_state &= ~EP_HALTED;
|
|
|
|
xhci_giveback_invalidated_tds(ep);
|
|
|
|
/* if this was a soft reset, then restart */
|
|
if ((le32_to_cpu(trb->generic.field[3])) & TRB_TSP)
|
|
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
|
|
}
|
|
|
|
static void xhci_handle_cmd_enable_slot(struct xhci_hcd *xhci, int slot_id,
|
|
struct xhci_command *command, u32 cmd_comp_code)
|
|
{
|
|
if (cmd_comp_code == COMP_SUCCESS)
|
|
command->slot_id = slot_id;
|
|
else
|
|
command->slot_id = 0;
|
|
}
|
|
|
|
static void xhci_handle_cmd_disable_slot(struct xhci_hcd *xhci, int slot_id)
|
|
{
|
|
struct xhci_virt_device *virt_dev;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
|
|
virt_dev = xhci->devs[slot_id];
|
|
if (!virt_dev)
|
|
return;
|
|
|
|
slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
|
|
trace_xhci_handle_cmd_disable_slot(slot_ctx);
|
|
|
|
if (xhci->quirks & XHCI_EP_LIMIT_QUIRK)
|
|
/* Delete default control endpoint resources */
|
|
xhci_free_device_endpoint_resources(xhci, virt_dev, true);
|
|
}
|
|
|
|
static void xhci_handle_cmd_config_ep(struct xhci_hcd *xhci, int slot_id,
|
|
u32 cmd_comp_code)
|
|
{
|
|
struct xhci_virt_device *virt_dev;
|
|
struct xhci_input_control_ctx *ctrl_ctx;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
unsigned int ep_index;
|
|
unsigned int ep_state;
|
|
u32 add_flags, drop_flags;
|
|
|
|
/*
|
|
* Configure endpoint commands can come from the USB core
|
|
* configuration or alt setting changes, or because the HW
|
|
* needed an extra configure endpoint command after a reset
|
|
* endpoint command or streams were being configured.
|
|
* If the command was for a halted endpoint, the xHCI driver
|
|
* is not waiting on the configure endpoint command.
|
|
*/
|
|
virt_dev = xhci->devs[slot_id];
|
|
if (!virt_dev)
|
|
return;
|
|
ctrl_ctx = xhci_get_input_control_ctx(virt_dev->in_ctx);
|
|
if (!ctrl_ctx) {
|
|
xhci_warn(xhci, "Could not get input context, bad type.\n");
|
|
return;
|
|
}
|
|
|
|
add_flags = le32_to_cpu(ctrl_ctx->add_flags);
|
|
drop_flags = le32_to_cpu(ctrl_ctx->drop_flags);
|
|
/* Input ctx add_flags are the endpoint index plus one */
|
|
ep_index = xhci_last_valid_endpoint(add_flags) - 1;
|
|
|
|
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->out_ctx, ep_index);
|
|
trace_xhci_handle_cmd_config_ep(ep_ctx);
|
|
|
|
/* A usb_set_interface() call directly after clearing a halted
|
|
* condition may race on this quirky hardware. Not worth
|
|
* worrying about, since this is prototype hardware. Not sure
|
|
* if this will work for streams, but streams support was
|
|
* untested on this prototype.
|
|
*/
|
|
if (xhci->quirks & XHCI_RESET_EP_QUIRK &&
|
|
ep_index != (unsigned int) -1 &&
|
|
add_flags - SLOT_FLAG == drop_flags) {
|
|
ep_state = virt_dev->eps[ep_index].ep_state;
|
|
if (!(ep_state & EP_HALTED))
|
|
return;
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
|
|
"Completed config ep cmd - "
|
|
"last ep index = %d, state = %d",
|
|
ep_index, ep_state);
|
|
/* Clear internal halted state and restart ring(s) */
|
|
virt_dev->eps[ep_index].ep_state &= ~EP_HALTED;
|
|
ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
|
|
return;
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void xhci_handle_cmd_addr_dev(struct xhci_hcd *xhci, int slot_id)
|
|
{
|
|
struct xhci_virt_device *vdev;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
|
|
vdev = xhci->devs[slot_id];
|
|
if (!vdev)
|
|
return;
|
|
slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
|
|
trace_xhci_handle_cmd_addr_dev(slot_ctx);
|
|
}
|
|
|
|
static void xhci_handle_cmd_reset_dev(struct xhci_hcd *xhci, int slot_id)
|
|
{
|
|
struct xhci_virt_device *vdev;
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
|
|
vdev = xhci->devs[slot_id];
|
|
if (!vdev) {
|
|
xhci_warn(xhci, "Reset device command completion for disabled slot %u\n",
|
|
slot_id);
|
|
return;
|
|
}
|
|
slot_ctx = xhci_get_slot_ctx(xhci, vdev->out_ctx);
|
|
trace_xhci_handle_cmd_reset_dev(slot_ctx);
|
|
|
|
xhci_dbg(xhci, "Completed reset device command.\n");
|
|
}
|
|
|
|
static void xhci_handle_cmd_nec_get_fw(struct xhci_hcd *xhci,
|
|
struct xhci_event_cmd *event)
|
|
{
|
|
if (!(xhci->quirks & XHCI_NEC_HOST)) {
|
|
xhci_warn(xhci, "WARN NEC_GET_FW command on non-NEC host\n");
|
|
return;
|
|
}
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
|
|
"NEC firmware version %2x.%02x",
|
|
NEC_FW_MAJOR(le32_to_cpu(event->status)),
|
|
NEC_FW_MINOR(le32_to_cpu(event->status)));
|
|
}
|
|
|
|
static void xhci_complete_del_and_free_cmd(struct xhci_command *cmd, u32 status)
|
|
{
|
|
list_del(&cmd->cmd_list);
|
|
|
|
if (cmd->completion) {
|
|
cmd->status = status;
|
|
complete(cmd->completion);
|
|
} else {
|
|
kfree(cmd);
|
|
}
|
|
}
|
|
|
|
void xhci_cleanup_command_queue(struct xhci_hcd *xhci)
|
|
{
|
|
struct xhci_command *cur_cmd, *tmp_cmd;
|
|
xhci->current_cmd = NULL;
|
|
list_for_each_entry_safe(cur_cmd, tmp_cmd, &xhci->cmd_list, cmd_list)
|
|
xhci_complete_del_and_free_cmd(cur_cmd, COMP_COMMAND_ABORTED);
|
|
}
|
|
|
|
void xhci_handle_command_timeout(struct work_struct *work)
|
|
{
|
|
struct xhci_hcd *xhci;
|
|
unsigned long flags;
|
|
u64 hw_ring_state;
|
|
|
|
xhci = container_of(to_delayed_work(work), struct xhci_hcd, cmd_timer);
|
|
|
|
spin_lock_irqsave(&xhci->lock, flags);
|
|
|
|
/*
|
|
* If timeout work is pending, or current_cmd is NULL, it means we
|
|
* raced with command completion. Command is handled so just return.
|
|
*/
|
|
if (!xhci->current_cmd || delayed_work_pending(&xhci->cmd_timer)) {
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return;
|
|
}
|
|
/* mark this command to be cancelled */
|
|
xhci->current_cmd->status = COMP_COMMAND_ABORTED;
|
|
|
|
/* Make sure command ring is running before aborting it */
|
|
hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
|
|
if (hw_ring_state == ~(u64)0) {
|
|
xhci_hc_died(xhci);
|
|
goto time_out_completed;
|
|
}
|
|
|
|
if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) &&
|
|
(hw_ring_state & CMD_RING_RUNNING)) {
|
|
/* Prevent new doorbell, and start command abort */
|
|
xhci->cmd_ring_state = CMD_RING_STATE_ABORTED;
|
|
xhci_dbg(xhci, "Command timeout\n");
|
|
xhci_abort_cmd_ring(xhci, flags);
|
|
goto time_out_completed;
|
|
}
|
|
|
|
/* host removed. Bail out */
|
|
if (xhci->xhc_state & XHCI_STATE_REMOVING) {
|
|
xhci_dbg(xhci, "host removed, ring start fail?\n");
|
|
xhci_cleanup_command_queue(xhci);
|
|
|
|
goto time_out_completed;
|
|
}
|
|
|
|
/* command timeout on stopped ring, ring can't be aborted */
|
|
xhci_dbg(xhci, "Command timeout on stopped ring\n");
|
|
xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd);
|
|
|
|
time_out_completed:
|
|
spin_unlock_irqrestore(&xhci->lock, flags);
|
|
return;
|
|
}
|
|
|
|
static void handle_cmd_completion(struct xhci_hcd *xhci,
|
|
struct xhci_event_cmd *event)
|
|
{
|
|
unsigned int slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
|
|
u64 cmd_dma;
|
|
dma_addr_t cmd_dequeue_dma;
|
|
u32 cmd_comp_code;
|
|
union xhci_trb *cmd_trb;
|
|
struct xhci_command *cmd;
|
|
u32 cmd_type;
|
|
|
|
if (slot_id >= MAX_HC_SLOTS) {
|
|
xhci_warn(xhci, "Invalid slot_id %u\n", slot_id);
|
|
return;
|
|
}
|
|
|
|
cmd_dma = le64_to_cpu(event->cmd_trb);
|
|
cmd_trb = xhci->cmd_ring->dequeue;
|
|
|
|
trace_xhci_handle_command(xhci->cmd_ring, &cmd_trb->generic);
|
|
|
|
cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
|
|
cmd_trb);
|
|
/*
|
|
* Check whether the completion event is for our internal kept
|
|
* command.
|
|
*/
|
|
if (!cmd_dequeue_dma || cmd_dma != (u64)cmd_dequeue_dma) {
|
|
xhci_warn(xhci,
|
|
"ERROR mismatched command completion event\n");
|
|
return;
|
|
}
|
|
|
|
cmd = list_first_entry(&xhci->cmd_list, struct xhci_command, cmd_list);
|
|
|
|
cancel_delayed_work(&xhci->cmd_timer);
|
|
|
|
cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
|
|
|
|
/* If CMD ring stopped we own the trbs between enqueue and dequeue */
|
|
if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
|
|
complete_all(&xhci->cmd_ring_stop_completion);
|
|
return;
|
|
}
|
|
|
|
if (cmd->command_trb != xhci->cmd_ring->dequeue) {
|
|
xhci_err(xhci,
|
|
"Command completion event does not match command\n");
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Host aborted the command ring, check if the current command was
|
|
* supposed to be aborted, otherwise continue normally.
|
|
* The command ring is stopped now, but the xHC will issue a Command
|
|
* Ring Stopped event which will cause us to restart it.
|
|
*/
|
|
if (cmd_comp_code == COMP_COMMAND_ABORTED) {
|
|
xhci->cmd_ring_state = CMD_RING_STATE_STOPPED;
|
|
if (cmd->status == COMP_COMMAND_ABORTED) {
|
|
if (xhci->current_cmd == cmd)
|
|
xhci->current_cmd = NULL;
|
|
goto event_handled;
|
|
}
|
|
}
|
|
|
|
cmd_type = TRB_FIELD_TO_TYPE(le32_to_cpu(cmd_trb->generic.field[3]));
|
|
switch (cmd_type) {
|
|
case TRB_ENABLE_SLOT:
|
|
xhci_handle_cmd_enable_slot(xhci, slot_id, cmd, cmd_comp_code);
|
|
break;
|
|
case TRB_DISABLE_SLOT:
|
|
xhci_handle_cmd_disable_slot(xhci, slot_id);
|
|
break;
|
|
case TRB_CONFIG_EP:
|
|
if (!cmd->completion)
|
|
xhci_handle_cmd_config_ep(xhci, slot_id, cmd_comp_code);
|
|
break;
|
|
case TRB_EVAL_CONTEXT:
|
|
break;
|
|
case TRB_ADDR_DEV:
|
|
xhci_handle_cmd_addr_dev(xhci, slot_id);
|
|
break;
|
|
case TRB_STOP_RING:
|
|
WARN_ON(slot_id != TRB_TO_SLOT_ID(
|
|
le32_to_cpu(cmd_trb->generic.field[3])));
|
|
if (!cmd->completion)
|
|
xhci_handle_cmd_stop_ep(xhci, slot_id, cmd_trb,
|
|
cmd_comp_code);
|
|
break;
|
|
case TRB_SET_DEQ:
|
|
WARN_ON(slot_id != TRB_TO_SLOT_ID(
|
|
le32_to_cpu(cmd_trb->generic.field[3])));
|
|
xhci_handle_cmd_set_deq(xhci, slot_id, cmd_trb, cmd_comp_code);
|
|
break;
|
|
case TRB_CMD_NOOP:
|
|
/* Is this an aborted command turned to NO-OP? */
|
|
if (cmd->status == COMP_COMMAND_RING_STOPPED)
|
|
cmd_comp_code = COMP_COMMAND_RING_STOPPED;
|
|
break;
|
|
case TRB_RESET_EP:
|
|
WARN_ON(slot_id != TRB_TO_SLOT_ID(
|
|
le32_to_cpu(cmd_trb->generic.field[3])));
|
|
xhci_handle_cmd_reset_ep(xhci, slot_id, cmd_trb, cmd_comp_code);
|
|
break;
|
|
case TRB_RESET_DEV:
|
|
/* SLOT_ID field in reset device cmd completion event TRB is 0.
|
|
* Use the SLOT_ID from the command TRB instead (xhci 4.6.11)
|
|
*/
|
|
slot_id = TRB_TO_SLOT_ID(
|
|
le32_to_cpu(cmd_trb->generic.field[3]));
|
|
xhci_handle_cmd_reset_dev(xhci, slot_id);
|
|
break;
|
|
case TRB_NEC_GET_FW:
|
|
xhci_handle_cmd_nec_get_fw(xhci, event);
|
|
break;
|
|
default:
|
|
/* Skip over unknown commands on the event ring */
|
|
xhci_info(xhci, "INFO unknown command type %d\n", cmd_type);
|
|
break;
|
|
}
|
|
|
|
/* restart timer if this wasn't the last command */
|
|
if (!list_is_singular(&xhci->cmd_list)) {
|
|
xhci->current_cmd = list_first_entry(&cmd->cmd_list,
|
|
struct xhci_command, cmd_list);
|
|
xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
|
|
} else if (xhci->current_cmd == cmd) {
|
|
xhci->current_cmd = NULL;
|
|
}
|
|
|
|
event_handled:
|
|
xhci_complete_del_and_free_cmd(cmd, cmd_comp_code);
|
|
|
|
inc_deq(xhci, xhci->cmd_ring);
|
|
}
|
|
|
|
static void handle_vendor_event(struct xhci_hcd *xhci,
|
|
union xhci_trb *event, u32 trb_type)
|
|
{
|
|
xhci_dbg(xhci, "Vendor specific event TRB type = %u\n", trb_type);
|
|
if (trb_type == TRB_NEC_CMD_COMP && (xhci->quirks & XHCI_NEC_HOST))
|
|
handle_cmd_completion(xhci, &event->event_cmd);
|
|
}
|
|
|
|
static void handle_device_notification(struct xhci_hcd *xhci,
|
|
union xhci_trb *event)
|
|
{
|
|
u32 slot_id;
|
|
struct usb_device *udev;
|
|
|
|
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->generic.field[3]));
|
|
if (!xhci->devs[slot_id]) {
|
|
xhci_warn(xhci, "Device Notification event for "
|
|
"unused slot %u\n", slot_id);
|
|
return;
|
|
}
|
|
|
|
xhci_dbg(xhci, "Device Wake Notification event for slot ID %u\n",
|
|
slot_id);
|
|
udev = xhci->devs[slot_id]->udev;
|
|
if (udev && udev->parent)
|
|
usb_wakeup_notification(udev->parent, udev->portnum);
|
|
}
|
|
|
|
/*
|
|
* Quirk hanlder for errata seen on Cavium ThunderX2 processor XHCI
|
|
* Controller.
|
|
* As per ThunderX2errata-129 USB 2 device may come up as USB 1
|
|
* If a connection to a USB 1 device is followed by another connection
|
|
* to a USB 2 device.
|
|
*
|
|
* Reset the PHY after the USB device is disconnected if device speed
|
|
* is less than HCD_USB3.
|
|
* Retry the reset sequence max of 4 times checking the PLL lock status.
|
|
*
|
|
*/
|
|
static void xhci_cavium_reset_phy_quirk(struct xhci_hcd *xhci)
|
|
{
|
|
struct usb_hcd *hcd = xhci_to_hcd(xhci);
|
|
u32 pll_lock_check;
|
|
u32 retry_count = 4;
|
|
|
|
do {
|
|
/* Assert PHY reset */
|
|
writel(0x6F, hcd->regs + 0x1048);
|
|
udelay(10);
|
|
/* De-assert the PHY reset */
|
|
writel(0x7F, hcd->regs + 0x1048);
|
|
udelay(200);
|
|
pll_lock_check = readl(hcd->regs + 0x1070);
|
|
} while (!(pll_lock_check & 0x1) && --retry_count);
|
|
}
|
|
|
|
static void handle_port_status(struct xhci_hcd *xhci,
|
|
union xhci_trb *event)
|
|
{
|
|
struct usb_hcd *hcd;
|
|
u32 port_id;
|
|
u32 portsc, cmd_reg;
|
|
int max_ports;
|
|
int slot_id;
|
|
unsigned int hcd_portnum;
|
|
struct xhci_bus_state *bus_state;
|
|
bool bogus_port_status = false;
|
|
struct xhci_port *port;
|
|
|
|
/* Port status change events always have a successful completion code */
|
|
if (GET_COMP_CODE(le32_to_cpu(event->generic.field[2])) != COMP_SUCCESS)
|
|
xhci_warn(xhci,
|
|
"WARN: xHC returned failed port status event\n");
|
|
|
|
port_id = GET_PORT_ID(le32_to_cpu(event->generic.field[0]));
|
|
max_ports = HCS_MAX_PORTS(xhci->hcs_params1);
|
|
|
|
if ((port_id <= 0) || (port_id > max_ports)) {
|
|
xhci_warn(xhci, "Port change event with invalid port ID %d\n",
|
|
port_id);
|
|
inc_deq(xhci, xhci->event_ring);
|
|
return;
|
|
}
|
|
|
|
port = &xhci->hw_ports[port_id - 1];
|
|
if (!port || !port->rhub || port->hcd_portnum == DUPLICATE_ENTRY) {
|
|
xhci_warn(xhci, "Port change event, no port for port ID %u\n",
|
|
port_id);
|
|
bogus_port_status = true;
|
|
goto cleanup;
|
|
}
|
|
|
|
/* We might get interrupts after shared_hcd is removed */
|
|
if (port->rhub == &xhci->usb3_rhub && xhci->shared_hcd == NULL) {
|
|
xhci_dbg(xhci, "ignore port event for removed USB3 hcd\n");
|
|
bogus_port_status = true;
|
|
goto cleanup;
|
|
}
|
|
|
|
hcd = port->rhub->hcd;
|
|
bus_state = &port->rhub->bus_state;
|
|
hcd_portnum = port->hcd_portnum;
|
|
portsc = readl(port->addr);
|
|
|
|
xhci_dbg(xhci, "Port change event, %d-%d, id %d, portsc: 0x%x\n",
|
|
hcd->self.busnum, hcd_portnum + 1, port_id, portsc);
|
|
|
|
trace_xhci_handle_port_status(hcd_portnum, portsc);
|
|
|
|
if (hcd->state == HC_STATE_SUSPENDED) {
|
|
xhci_dbg(xhci, "resume root hub\n");
|
|
usb_hcd_resume_root_hub(hcd);
|
|
}
|
|
|
|
if (hcd->speed >= HCD_USB3 &&
|
|
(portsc & PORT_PLS_MASK) == XDEV_INACTIVE) {
|
|
slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
|
|
if (slot_id && xhci->devs[slot_id])
|
|
xhci->devs[slot_id]->flags |= VDEV_PORT_ERROR;
|
|
}
|
|
|
|
if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_RESUME) {
|
|
xhci_dbg(xhci, "port resume event for port %d\n", port_id);
|
|
|
|
cmd_reg = readl(&xhci->op_regs->command);
|
|
if (!(cmd_reg & CMD_RUN)) {
|
|
xhci_warn(xhci, "xHC is not running.\n");
|
|
goto cleanup;
|
|
}
|
|
|
|
if (DEV_SUPERSPEED_ANY(portsc)) {
|
|
xhci_dbg(xhci, "remote wake SS port %d\n", port_id);
|
|
/* Set a flag to say the port signaled remote wakeup,
|
|
* so we can tell the difference between the end of
|
|
* device and host initiated resume.
|
|
*/
|
|
bus_state->port_remote_wakeup |= 1 << hcd_portnum;
|
|
xhci_test_and_clear_bit(xhci, port, PORT_PLC);
|
|
usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
|
|
xhci_set_link_state(xhci, port, XDEV_U0);
|
|
/* Need to wait until the next link state change
|
|
* indicates the device is actually in U0.
|
|
*/
|
|
bogus_port_status = true;
|
|
goto cleanup;
|
|
} else if (!test_bit(hcd_portnum, &bus_state->resuming_ports)) {
|
|
xhci_dbg(xhci, "resume HS port %d\n", port_id);
|
|
bus_state->resume_done[hcd_portnum] = jiffies +
|
|
msecs_to_jiffies(USB_RESUME_TIMEOUT);
|
|
set_bit(hcd_portnum, &bus_state->resuming_ports);
|
|
/* Do the rest in GetPortStatus after resume time delay.
|
|
* Avoid polling roothub status before that so that a
|
|
* usb device auto-resume latency around ~40ms.
|
|
*/
|
|
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
|
mod_timer(&hcd->rh_timer,
|
|
bus_state->resume_done[hcd_portnum]);
|
|
usb_hcd_start_port_resume(&hcd->self, hcd_portnum);
|
|
bogus_port_status = true;
|
|
}
|
|
}
|
|
|
|
if ((portsc & PORT_PLC) &&
|
|
DEV_SUPERSPEED_ANY(portsc) &&
|
|
((portsc & PORT_PLS_MASK) == XDEV_U0 ||
|
|
(portsc & PORT_PLS_MASK) == XDEV_U1 ||
|
|
(portsc & PORT_PLS_MASK) == XDEV_U2)) {
|
|
xhci_dbg(xhci, "resume SS port %d finished\n", port_id);
|
|
complete(&bus_state->u3exit_done[hcd_portnum]);
|
|
/* We've just brought the device into U0/1/2 through either the
|
|
* Resume state after a device remote wakeup, or through the
|
|
* U3Exit state after a host-initiated resume. If it's a device
|
|
* initiated remote wake, don't pass up the link state change,
|
|
* so the roothub behavior is consistent with external
|
|
* USB 3.0 hub behavior.
|
|
*/
|
|
slot_id = xhci_find_slot_id_by_port(hcd, xhci, hcd_portnum + 1);
|
|
if (slot_id && xhci->devs[slot_id])
|
|
xhci_ring_device(xhci, slot_id);
|
|
if (bus_state->port_remote_wakeup & (1 << hcd_portnum)) {
|
|
xhci_test_and_clear_bit(xhci, port, PORT_PLC);
|
|
usb_wakeup_notification(hcd->self.root_hub,
|
|
hcd_portnum + 1);
|
|
bogus_port_status = true;
|
|
goto cleanup;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check to see if xhci-hub.c is waiting on RExit to U0 transition (or
|
|
* RExit to a disconnect state). If so, let the the driver know it's
|
|
* out of the RExit state.
|
|
*/
|
|
if (!DEV_SUPERSPEED_ANY(portsc) && hcd->speed < HCD_USB3 &&
|
|
test_and_clear_bit(hcd_portnum,
|
|
&bus_state->rexit_ports)) {
|
|
complete(&bus_state->rexit_done[hcd_portnum]);
|
|
bogus_port_status = true;
|
|
goto cleanup;
|
|
}
|
|
|
|
if (hcd->speed < HCD_USB3) {
|
|
xhci_test_and_clear_bit(xhci, port, PORT_PLC);
|
|
if ((xhci->quirks & XHCI_RESET_PLL_ON_DISCONNECT) &&
|
|
(portsc & PORT_CSC) && !(portsc & PORT_CONNECT))
|
|
xhci_cavium_reset_phy_quirk(xhci);
|
|
}
|
|
|
|
cleanup:
|
|
/* Update event ring dequeue pointer before dropping the lock */
|
|
inc_deq(xhci, xhci->event_ring);
|
|
|
|
/* Don't make the USB core poll the roothub if we got a bad port status
|
|
* change event. Besides, at that point we can't tell which roothub
|
|
* (USB 2.0 or USB 3.0) to kick.
|
|
*/
|
|
if (bogus_port_status)
|
|
return;
|
|
|
|
/*
|
|
* xHCI port-status-change events occur when the "or" of all the
|
|
* status-change bits in the portsc register changes from 0 to 1.
|
|
* New status changes won't cause an event if any other change
|
|
* bits are still set. When an event occurs, switch over to
|
|
* polling to avoid losing status changes.
|
|
*/
|
|
xhci_dbg(xhci, "%s: starting usb%d port polling.\n",
|
|
__func__, hcd->self.busnum);
|
|
set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
|
|
spin_unlock(&xhci->lock);
|
|
/* Pass this up to the core */
|
|
usb_hcd_poll_rh_status(hcd);
|
|
spin_lock(&xhci->lock);
|
|
}
|
|
|
|
/*
|
|
* This TD is defined by the TRBs starting at start_trb in start_seg and ending
|
|
* at end_trb, which may be in another segment. If the suspect DMA address is a
|
|
* TRB in this TD, this function returns that TRB's segment. Otherwise it
|
|
* returns 0.
|
|
*/
|
|
struct xhci_segment *trb_in_td(struct xhci_hcd *xhci,
|
|
struct xhci_segment *start_seg,
|
|
union xhci_trb *start_trb,
|
|
union xhci_trb *end_trb,
|
|
dma_addr_t suspect_dma,
|
|
bool debug)
|
|
{
|
|
dma_addr_t start_dma;
|
|
dma_addr_t end_seg_dma;
|
|
dma_addr_t end_trb_dma;
|
|
struct xhci_segment *cur_seg;
|
|
|
|
start_dma = xhci_trb_virt_to_dma(start_seg, start_trb);
|
|
cur_seg = start_seg;
|
|
|
|
do {
|
|
if (start_dma == 0)
|
|
return NULL;
|
|
/* We may get an event for a Link TRB in the middle of a TD */
|
|
end_seg_dma = xhci_trb_virt_to_dma(cur_seg,
|
|
&cur_seg->trbs[TRBS_PER_SEGMENT - 1]);
|
|
/* If the end TRB isn't in this segment, this is set to 0 */
|
|
end_trb_dma = xhci_trb_virt_to_dma(cur_seg, end_trb);
|
|
|
|
if (debug)
|
|
xhci_warn(xhci,
|
|
"Looking for event-dma %016llx trb-start %016llx trb-end %016llx seg-start %016llx seg-end %016llx\n",
|
|
(unsigned long long)suspect_dma,
|
|
(unsigned long long)start_dma,
|
|
(unsigned long long)end_trb_dma,
|
|
(unsigned long long)cur_seg->dma,
|
|
(unsigned long long)end_seg_dma);
|
|
|
|
if (end_trb_dma > 0) {
|
|
/* The end TRB is in this segment, so suspect should be here */
|
|
if (start_dma <= end_trb_dma) {
|
|
if (suspect_dma >= start_dma && suspect_dma <= end_trb_dma)
|
|
return cur_seg;
|
|
} else {
|
|
/* Case for one segment with
|
|
* a TD wrapped around to the top
|
|
*/
|
|
if ((suspect_dma >= start_dma &&
|
|
suspect_dma <= end_seg_dma) ||
|
|
(suspect_dma >= cur_seg->dma &&
|
|
suspect_dma <= end_trb_dma))
|
|
return cur_seg;
|
|
}
|
|
return NULL;
|
|
} else {
|
|
/* Might still be somewhere in this segment */
|
|
if (suspect_dma >= start_dma && suspect_dma <= end_seg_dma)
|
|
return cur_seg;
|
|
}
|
|
cur_seg = cur_seg->next;
|
|
start_dma = xhci_trb_virt_to_dma(cur_seg, &cur_seg->trbs[0]);
|
|
} while (cur_seg != start_seg);
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static void xhci_clear_hub_tt_buffer(struct xhci_hcd *xhci, struct xhci_td *td,
|
|
struct xhci_virt_ep *ep)
|
|
{
|
|
/*
|
|
* As part of low/full-speed endpoint-halt processing
|
|
* we must clear the TT buffer (USB 2.0 specification 11.17.5).
|
|
*/
|
|
if (td->urb->dev->tt && !usb_pipeint(td->urb->pipe) &&
|
|
(td->urb->dev->tt->hub != xhci_to_hcd(xhci)->self.root_hub) &&
|
|
!(ep->ep_state & EP_CLEARING_TT)) {
|
|
ep->ep_state |= EP_CLEARING_TT;
|
|
td->urb->ep->hcpriv = td->urb->dev;
|
|
if (usb_hub_clear_tt_buffer(td->urb))
|
|
ep->ep_state &= ~EP_CLEARING_TT;
|
|
}
|
|
}
|
|
|
|
/* Check if an error has halted the endpoint ring. The class driver will
|
|
* cleanup the halt for a non-default control endpoint if we indicate a stall.
|
|
* However, a babble and other errors also halt the endpoint ring, and the class
|
|
* driver won't clear the halt in that case, so we need to issue a Set Transfer
|
|
* Ring Dequeue Pointer command manually.
|
|
*/
|
|
static int xhci_requires_manual_halt_cleanup(struct xhci_hcd *xhci,
|
|
struct xhci_ep_ctx *ep_ctx,
|
|
unsigned int trb_comp_code)
|
|
{
|
|
/* TRB completion codes that may require a manual halt cleanup */
|
|
if (trb_comp_code == COMP_USB_TRANSACTION_ERROR ||
|
|
trb_comp_code == COMP_BABBLE_DETECTED_ERROR ||
|
|
trb_comp_code == COMP_SPLIT_TRANSACTION_ERROR)
|
|
/* The 0.95 spec says a babbling control endpoint
|
|
* is not halted. The 0.96 spec says it is. Some HW
|
|
* claims to be 0.95 compliant, but it halts the control
|
|
* endpoint anyway. Check if a babble halted the
|
|
* endpoint.
|
|
*/
|
|
if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_HALTED)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code)
|
|
{
|
|
if (trb_comp_code >= 224 && trb_comp_code <= 255) {
|
|
/* Vendor defined "informational" completion code,
|
|
* treat as not-an-error.
|
|
*/
|
|
xhci_dbg(xhci, "Vendor defined info completion code %u\n",
|
|
trb_comp_code);
|
|
xhci_dbg(xhci, "Treating code as success.\n");
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int finish_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
|
|
struct xhci_ring *ep_ring, struct xhci_td *td,
|
|
u32 trb_comp_code)
|
|
{
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
|
|
ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
|
|
|
|
switch (trb_comp_code) {
|
|
case COMP_STOPPED_LENGTH_INVALID:
|
|
case COMP_STOPPED_SHORT_PACKET:
|
|
case COMP_STOPPED:
|
|
/*
|
|
* The "Stop Endpoint" completion will take care of any
|
|
* stopped TDs. A stopped TD may be restarted, so don't update
|
|
* the ring dequeue pointer or take this TD off any lists yet.
|
|
*/
|
|
return 0;
|
|
case COMP_USB_TRANSACTION_ERROR:
|
|
case COMP_BABBLE_DETECTED_ERROR:
|
|
case COMP_SPLIT_TRANSACTION_ERROR:
|
|
/*
|
|
* If endpoint context state is not halted we might be
|
|
* racing with a reset endpoint command issued by a unsuccessful
|
|
* stop endpoint completion (context error). In that case the
|
|
* td should be on the cancelled list, and EP_HALTED flag set.
|
|
*
|
|
* Or then it's not halted due to the 0.95 spec stating that a
|
|
* babbling control endpoint should not halt. The 0.96 spec
|
|
* again says it should. Some HW claims to be 0.95 compliant,
|
|
* but it halts the control endpoint anyway.
|
|
*/
|
|
if (GET_EP_CTX_STATE(ep_ctx) != EP_STATE_HALTED) {
|
|
/*
|
|
* If EP_HALTED is set and TD is on the cancelled list
|
|
* the TD and dequeue pointer will be handled by reset
|
|
* ep command completion
|
|
*/
|
|
if ((ep->ep_state & EP_HALTED) &&
|
|
!list_empty(&td->cancelled_td_list)) {
|
|
xhci_dbg(xhci, "Already resolving halted ep for 0x%llx\n",
|
|
(unsigned long long)xhci_trb_virt_to_dma(
|
|
td->start_seg, td->first_trb));
|
|
return 0;
|
|
}
|
|
/* endpoint not halted, don't reset it */
|
|
break;
|
|
}
|
|
/* Almost same procedure as for STALL_ERROR below */
|
|
xhci_clear_hub_tt_buffer(xhci, td, ep);
|
|
xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
|
|
EP_HARD_RESET);
|
|
return 0;
|
|
case COMP_STALL_ERROR:
|
|
/*
|
|
* xhci internal endpoint state will go to a "halt" state for
|
|
* any stall, including default control pipe protocol stall.
|
|
* To clear the host side halt we need to issue a reset endpoint
|
|
* command, followed by a set dequeue command to move past the
|
|
* TD.
|
|
* Class drivers clear the device side halt from a functional
|
|
* stall later. Hub TT buffer should only be cleared for FS/LS
|
|
* devices behind HS hubs for functional stalls.
|
|
*/
|
|
if (ep->ep_index != 0)
|
|
xhci_clear_hub_tt_buffer(xhci, td, ep);
|
|
|
|
xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
|
|
EP_HARD_RESET);
|
|
|
|
return 0; /* xhci_handle_halted_endpoint marked td cancelled */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Update ring dequeue pointer */
|
|
ep_ring->dequeue = td->last_trb;
|
|
ep_ring->deq_seg = td->last_trb_seg;
|
|
ep_ring->num_trbs_free += td->num_trbs - 1;
|
|
inc_deq(xhci, ep_ring);
|
|
|
|
return xhci_td_cleanup(xhci, td, ep_ring, td->status);
|
|
}
|
|
|
|
/* sum trb lengths from ring dequeue up to stop_trb, _excluding_ stop_trb */
|
|
static int sum_trb_lengths(struct xhci_hcd *xhci, struct xhci_ring *ring,
|
|
union xhci_trb *stop_trb)
|
|
{
|
|
u32 sum;
|
|
union xhci_trb *trb = ring->dequeue;
|
|
struct xhci_segment *seg = ring->deq_seg;
|
|
|
|
for (sum = 0; trb != stop_trb; next_trb(xhci, ring, &seg, &trb)) {
|
|
if (!trb_is_noop(trb) && !trb_is_link(trb))
|
|
sum += TRB_LEN(le32_to_cpu(trb->generic.field[2]));
|
|
}
|
|
return sum;
|
|
}
|
|
|
|
/*
|
|
* Process control tds, update urb status and actual_length.
|
|
*/
|
|
static int process_ctrl_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
|
|
struct xhci_ring *ep_ring, struct xhci_td *td,
|
|
union xhci_trb *ep_trb, struct xhci_transfer_event *event)
|
|
{
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
u32 trb_comp_code;
|
|
u32 remaining, requested;
|
|
u32 trb_type;
|
|
|
|
trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(ep_trb->generic.field[3]));
|
|
ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep->ep_index);
|
|
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
|
|
requested = td->urb->transfer_buffer_length;
|
|
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
|
|
|
|
switch (trb_comp_code) {
|
|
case COMP_SUCCESS:
|
|
if (trb_type != TRB_STATUS) {
|
|
xhci_warn(xhci, "WARN: Success on ctrl %s TRB without IOC set?\n",
|
|
(trb_type == TRB_DATA) ? "data" : "setup");
|
|
td->status = -ESHUTDOWN;
|
|
break;
|
|
}
|
|
td->status = 0;
|
|
break;
|
|
case COMP_SHORT_PACKET:
|
|
td->status = 0;
|
|
break;
|
|
case COMP_STOPPED_SHORT_PACKET:
|
|
if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
|
|
td->urb->actual_length = remaining;
|
|
else
|
|
xhci_warn(xhci, "WARN: Stopped Short Packet on ctrl setup or status TRB\n");
|
|
goto finish_td;
|
|
case COMP_STOPPED:
|
|
switch (trb_type) {
|
|
case TRB_SETUP:
|
|
td->urb->actual_length = 0;
|
|
goto finish_td;
|
|
case TRB_DATA:
|
|
case TRB_NORMAL:
|
|
td->urb->actual_length = requested - remaining;
|
|
goto finish_td;
|
|
case TRB_STATUS:
|
|
td->urb->actual_length = requested;
|
|
goto finish_td;
|
|
default:
|
|
xhci_warn(xhci, "WARN: unexpected TRB Type %d\n",
|
|
trb_type);
|
|
goto finish_td;
|
|
}
|
|
case COMP_STOPPED_LENGTH_INVALID:
|
|
goto finish_td;
|
|
default:
|
|
if (!xhci_requires_manual_halt_cleanup(xhci,
|
|
ep_ctx, trb_comp_code))
|
|
break;
|
|
xhci_dbg(xhci, "TRB error %u, halted endpoint index = %u\n",
|
|
trb_comp_code, ep->ep_index);
|
|
fallthrough;
|
|
case COMP_STALL_ERROR:
|
|
/* Did we transfer part of the data (middle) phase? */
|
|
if (trb_type == TRB_DATA || trb_type == TRB_NORMAL)
|
|
td->urb->actual_length = requested - remaining;
|
|
else if (!td->urb_length_set)
|
|
td->urb->actual_length = 0;
|
|
goto finish_td;
|
|
}
|
|
|
|
/* stopped at setup stage, no data transferred */
|
|
if (trb_type == TRB_SETUP)
|
|
goto finish_td;
|
|
|
|
/*
|
|
* if on data stage then update the actual_length of the URB and flag it
|
|
* as set, so it won't be overwritten in the event for the last TRB.
|
|
*/
|
|
if (trb_type == TRB_DATA ||
|
|
trb_type == TRB_NORMAL) {
|
|
td->urb_length_set = true;
|
|
td->urb->actual_length = requested - remaining;
|
|
xhci_dbg(xhci, "Waiting for status stage event\n");
|
|
return 0;
|
|
}
|
|
|
|
/* at status stage */
|
|
if (!td->urb_length_set)
|
|
td->urb->actual_length = requested;
|
|
|
|
finish_td:
|
|
return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
|
|
}
|
|
|
|
/*
|
|
* Process isochronous tds, update urb packet status and actual_length.
|
|
*/
|
|
static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
|
|
struct xhci_ring *ep_ring, struct xhci_td *td,
|
|
union xhci_trb *ep_trb, struct xhci_transfer_event *event)
|
|
{
|
|
struct urb_priv *urb_priv;
|
|
int idx;
|
|
struct usb_iso_packet_descriptor *frame;
|
|
u32 trb_comp_code;
|
|
bool sum_trbs_for_length = false;
|
|
u32 remaining, requested, ep_trb_len;
|
|
int short_framestatus;
|
|
|
|
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
|
|
urb_priv = td->urb->hcpriv;
|
|
idx = urb_priv->num_tds_done;
|
|
frame = &td->urb->iso_frame_desc[idx];
|
|
requested = frame->length;
|
|
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
|
|
ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
|
|
short_framestatus = td->urb->transfer_flags & URB_SHORT_NOT_OK ?
|
|
-EREMOTEIO : 0;
|
|
|
|
/* handle completion code */
|
|
switch (trb_comp_code) {
|
|
case COMP_SUCCESS:
|
|
if (remaining) {
|
|
frame->status = short_framestatus;
|
|
if (xhci->quirks & XHCI_TRUST_TX_LENGTH)
|
|
sum_trbs_for_length = true;
|
|
break;
|
|
}
|
|
frame->status = 0;
|
|
break;
|
|
case COMP_SHORT_PACKET:
|
|
frame->status = short_framestatus;
|
|
sum_trbs_for_length = true;
|
|
break;
|
|
case COMP_BANDWIDTH_OVERRUN_ERROR:
|
|
frame->status = -ECOMM;
|
|
break;
|
|
case COMP_ISOCH_BUFFER_OVERRUN:
|
|
case COMP_BABBLE_DETECTED_ERROR:
|
|
frame->status = -EOVERFLOW;
|
|
break;
|
|
case COMP_INCOMPATIBLE_DEVICE_ERROR:
|
|
case COMP_STALL_ERROR:
|
|
frame->status = -EPROTO;
|
|
break;
|
|
case COMP_USB_TRANSACTION_ERROR:
|
|
frame->status = -EPROTO;
|
|
if (ep_trb != td->last_trb)
|
|
return 0;
|
|
break;
|
|
case COMP_STOPPED:
|
|
sum_trbs_for_length = true;
|
|
break;
|
|
case COMP_STOPPED_SHORT_PACKET:
|
|
/* field normally containing residue now contains tranferred */
|
|
frame->status = short_framestatus;
|
|
requested = remaining;
|
|
break;
|
|
case COMP_STOPPED_LENGTH_INVALID:
|
|
requested = 0;
|
|
remaining = 0;
|
|
break;
|
|
default:
|
|
sum_trbs_for_length = true;
|
|
frame->status = -1;
|
|
break;
|
|
}
|
|
|
|
if (sum_trbs_for_length)
|
|
frame->actual_length = sum_trb_lengths(xhci, ep->ring, ep_trb) +
|
|
ep_trb_len - remaining;
|
|
else
|
|
frame->actual_length = requested;
|
|
|
|
td->urb->actual_length += frame->actual_length;
|
|
|
|
return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
|
|
}
|
|
|
|
static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
|
|
struct xhci_virt_ep *ep, int status)
|
|
{
|
|
struct urb_priv *urb_priv;
|
|
struct usb_iso_packet_descriptor *frame;
|
|
int idx;
|
|
|
|
urb_priv = td->urb->hcpriv;
|
|
idx = urb_priv->num_tds_done;
|
|
frame = &td->urb->iso_frame_desc[idx];
|
|
|
|
/* The transfer is partly done. */
|
|
frame->status = -EXDEV;
|
|
|
|
/* calc actual length */
|
|
frame->actual_length = 0;
|
|
|
|
/* Update ring dequeue pointer */
|
|
ep->ring->dequeue = td->last_trb;
|
|
ep->ring->deq_seg = td->last_trb_seg;
|
|
ep->ring->num_trbs_free += td->num_trbs - 1;
|
|
inc_deq(xhci, ep->ring);
|
|
|
|
return xhci_td_cleanup(xhci, td, ep->ring, status);
|
|
}
|
|
|
|
/*
|
|
* Process bulk and interrupt tds, update urb status and actual_length.
|
|
*/
|
|
static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_virt_ep *ep,
|
|
struct xhci_ring *ep_ring, struct xhci_td *td,
|
|
union xhci_trb *ep_trb, struct xhci_transfer_event *event)
|
|
{
|
|
struct xhci_slot_ctx *slot_ctx;
|
|
u32 trb_comp_code;
|
|
u32 remaining, requested, ep_trb_len;
|
|
|
|
slot_ctx = xhci_get_slot_ctx(xhci, ep->vdev->out_ctx);
|
|
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
|
|
remaining = EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
|
|
ep_trb_len = TRB_LEN(le32_to_cpu(ep_trb->generic.field[2]));
|
|
requested = td->urb->transfer_buffer_length;
|
|
|
|
switch (trb_comp_code) {
|
|
case COMP_SUCCESS:
|
|
ep_ring->err_count = 0;
|
|
/* handle success with untransferred data as short packet */
|
|
if (ep_trb != td->last_trb || remaining) {
|
|
xhci_warn(xhci, "WARN Successful completion on short TX\n");
|
|
xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
|
|
td->urb->ep->desc.bEndpointAddress,
|
|
requested, remaining);
|
|
}
|
|
td->status = 0;
|
|
break;
|
|
case COMP_SHORT_PACKET:
|
|
xhci_dbg(xhci, "ep %#x - asked for %d bytes, %d bytes untransferred\n",
|
|
td->urb->ep->desc.bEndpointAddress,
|
|
requested, remaining);
|
|
td->status = 0;
|
|
break;
|
|
case COMP_STOPPED_SHORT_PACKET:
|
|
td->urb->actual_length = remaining;
|
|
goto finish_td;
|
|
case COMP_STOPPED_LENGTH_INVALID:
|
|
/* stopped on ep trb with invalid length, exclude it */
|
|
ep_trb_len = 0;
|
|
remaining = 0;
|
|
break;
|
|
case COMP_USB_TRANSACTION_ERROR:
|
|
if (xhci->quirks & XHCI_NO_SOFT_RETRY ||
|
|
(ep_ring->err_count++ > MAX_SOFT_RETRY) ||
|
|
le32_to_cpu(slot_ctx->tt_info) & TT_SLOT)
|
|
break;
|
|
|
|
td->status = 0;
|
|
|
|
xhci_handle_halted_endpoint(xhci, ep, ep_ring->stream_id, td,
|
|
EP_SOFT_RESET);
|
|
return 0;
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
|
|
if (ep_trb == td->last_trb)
|
|
td->urb->actual_length = requested - remaining;
|
|
else
|
|
td->urb->actual_length =
|
|
sum_trb_lengths(xhci, ep_ring, ep_trb) +
|
|
ep_trb_len - remaining;
|
|
finish_td:
|
|
if (remaining > requested) {
|
|
xhci_warn(xhci, "bad transfer trb length %d in event trb\n",
|
|
remaining);
|
|
td->urb->actual_length = 0;
|
|
}
|
|
|
|
return finish_td(xhci, ep, ep_ring, td, trb_comp_code);
|
|
}
|
|
|
|
/*
|
|
* If this function returns an error condition, it means it got a Transfer
|
|
* event with a corrupted Slot ID, Endpoint ID, or TRB DMA address.
|
|
* At this point, the host controller is probably hosed and should be reset.
|
|
*/
|
|
static int handle_tx_event(struct xhci_hcd *xhci,
|
|
struct xhci_transfer_event *event)
|
|
{
|
|
struct xhci_virt_ep *ep;
|
|
struct xhci_ring *ep_ring;
|
|
unsigned int slot_id;
|
|
int ep_index;
|
|
struct xhci_td *td = NULL;
|
|
dma_addr_t ep_trb_dma;
|
|
struct xhci_segment *ep_seg;
|
|
union xhci_trb *ep_trb;
|
|
int status = -EINPROGRESS;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
struct list_head *tmp;
|
|
u32 trb_comp_code;
|
|
int td_num = 0;
|
|
bool handling_skipped_tds = false;
|
|
|
|
slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags));
|
|
ep_index = TRB_TO_EP_ID(le32_to_cpu(event->flags)) - 1;
|
|
trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len));
|
|
ep_trb_dma = le64_to_cpu(event->buffer);
|
|
|
|
ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
|
|
if (!ep) {
|
|
xhci_err(xhci, "ERROR Invalid Transfer event\n");
|
|
goto err_out;
|
|
}
|
|
|
|
ep_ring = xhci_dma_to_transfer_ring(ep, ep_trb_dma);
|
|
ep_ctx = xhci_get_ep_ctx(xhci, ep->vdev->out_ctx, ep_index);
|
|
|
|
if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_DISABLED) {
|
|
xhci_err(xhci,
|
|
"ERROR Transfer event for disabled endpoint slot %u ep %u\n",
|
|
slot_id, ep_index);
|
|
goto err_out;
|
|
}
|
|
|
|
/* Some transfer events don't always point to a trb, see xhci 4.17.4 */
|
|
if (!ep_ring) {
|
|
switch (trb_comp_code) {
|
|
case COMP_STALL_ERROR:
|
|
case COMP_USB_TRANSACTION_ERROR:
|
|
case COMP_INVALID_STREAM_TYPE_ERROR:
|
|
case COMP_INVALID_STREAM_ID_ERROR:
|
|
xhci_handle_halted_endpoint(xhci, ep, 0, NULL,
|
|
EP_SOFT_RESET);
|
|
goto cleanup;
|
|
case COMP_RING_UNDERRUN:
|
|
case COMP_RING_OVERRUN:
|
|
case COMP_STOPPED_LENGTH_INVALID:
|
|
goto cleanup;
|
|
default:
|
|
xhci_err(xhci, "ERROR Transfer event for unknown stream ring slot %u ep %u\n",
|
|
slot_id, ep_index);
|
|
goto err_out;
|
|
}
|
|
}
|
|
|
|
/* Count current td numbers if ep->skip is set */
|
|
if (ep->skip) {
|
|
list_for_each(tmp, &ep_ring->td_list)
|
|
td_num++;
|
|
}
|
|
|
|
/* Look for common error cases */
|
|
switch (trb_comp_code) {
|
|
/* Skip codes that require special handling depending on
|
|
* transfer type
|
|
*/
|
|
case COMP_SUCCESS:
|
|
if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) == 0)
|
|
break;
|
|
if (xhci->quirks & XHCI_TRUST_TX_LENGTH ||
|
|
ep_ring->last_td_was_short)
|
|
trb_comp_code = COMP_SHORT_PACKET;
|
|
else
|
|
xhci_warn_ratelimited(xhci,
|
|
"WARN Successful completion on short TX for slot %u ep %u: needs XHCI_TRUST_TX_LENGTH quirk?\n",
|
|
slot_id, ep_index);
|
|
break;
|
|
case COMP_SHORT_PACKET:
|
|
break;
|
|
/* Completion codes for endpoint stopped state */
|
|
case COMP_STOPPED:
|
|
xhci_dbg(xhci, "Stopped on Transfer TRB for slot %u ep %u\n",
|
|
slot_id, ep_index);
|
|
break;
|
|
case COMP_STOPPED_LENGTH_INVALID:
|
|
xhci_dbg(xhci,
|
|
"Stopped on No-op or Link TRB for slot %u ep %u\n",
|
|
slot_id, ep_index);
|
|
break;
|
|
case COMP_STOPPED_SHORT_PACKET:
|
|
xhci_dbg(xhci,
|
|
"Stopped with short packet transfer detected for slot %u ep %u\n",
|
|
slot_id, ep_index);
|
|
break;
|
|
/* Completion codes for endpoint halted state */
|
|
case COMP_STALL_ERROR:
|
|
xhci_dbg(xhci, "Stalled endpoint for slot %u ep %u\n", slot_id,
|
|
ep_index);
|
|
status = -EPIPE;
|
|
break;
|
|
case COMP_SPLIT_TRANSACTION_ERROR:
|
|
xhci_dbg(xhci, "Split transaction error for slot %u ep %u\n",
|
|
slot_id, ep_index);
|
|
status = -EPROTO;
|
|
break;
|
|
case COMP_USB_TRANSACTION_ERROR:
|
|
xhci_dbg(xhci, "Transfer error for slot %u ep %u on endpoint\n",
|
|
slot_id, ep_index);
|
|
status = -EPROTO;
|
|
break;
|
|
case COMP_BABBLE_DETECTED_ERROR:
|
|
xhci_dbg(xhci, "Babble error for slot %u ep %u on endpoint\n",
|
|
slot_id, ep_index);
|
|
status = -EOVERFLOW;
|
|
break;
|
|
/* Completion codes for endpoint error state */
|
|
case COMP_TRB_ERROR:
|
|
xhci_warn(xhci,
|
|
"WARN: TRB error for slot %u ep %u on endpoint\n",
|
|
slot_id, ep_index);
|
|
status = -EILSEQ;
|
|
break;
|
|
/* completion codes not indicating endpoint state change */
|
|
case COMP_DATA_BUFFER_ERROR:
|
|
xhci_warn(xhci,
|
|
"WARN: HC couldn't access mem fast enough for slot %u ep %u\n",
|
|
slot_id, ep_index);
|
|
status = -ENOSR;
|
|
break;
|
|
case COMP_BANDWIDTH_OVERRUN_ERROR:
|
|
xhci_warn(xhci,
|
|
"WARN: bandwidth overrun event for slot %u ep %u on endpoint\n",
|
|
slot_id, ep_index);
|
|
break;
|
|
case COMP_ISOCH_BUFFER_OVERRUN:
|
|
xhci_warn(xhci,
|
|
"WARN: buffer overrun event for slot %u ep %u on endpoint",
|
|
slot_id, ep_index);
|
|
break;
|
|
case COMP_RING_UNDERRUN:
|
|
/*
|
|
* When the Isoch ring is empty, the xHC will generate
|
|
* a Ring Overrun Event for IN Isoch endpoint or Ring
|
|
* Underrun Event for OUT Isoch endpoint.
|
|
*/
|
|
xhci_dbg(xhci, "underrun event on endpoint\n");
|
|
if (!list_empty(&ep_ring->td_list))
|
|
xhci_dbg(xhci, "Underrun Event for slot %d ep %d "
|
|
"still with TDs queued?\n",
|
|
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
|
|
ep_index);
|
|
goto cleanup;
|
|
case COMP_RING_OVERRUN:
|
|
xhci_dbg(xhci, "overrun event on endpoint\n");
|
|
if (!list_empty(&ep_ring->td_list))
|
|
xhci_dbg(xhci, "Overrun Event for slot %d ep %d "
|
|
"still with TDs queued?\n",
|
|
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
|
|
ep_index);
|
|
goto cleanup;
|
|
case COMP_MISSED_SERVICE_ERROR:
|
|
/*
|
|
* When encounter missed service error, one or more isoc tds
|
|
* may be missed by xHC.
|
|
* Set skip flag of the ep_ring; Complete the missed tds as
|
|
* short transfer when process the ep_ring next time.
|
|
*/
|
|
ep->skip = true;
|
|
xhci_dbg(xhci,
|
|
"Miss service interval error for slot %u ep %u, set skip flag\n",
|
|
slot_id, ep_index);
|
|
goto cleanup;
|
|
case COMP_NO_PING_RESPONSE_ERROR:
|
|
ep->skip = true;
|
|
xhci_dbg(xhci,
|
|
"No Ping response error for slot %u ep %u, Skip one Isoc TD\n",
|
|
slot_id, ep_index);
|
|
goto cleanup;
|
|
|
|
case COMP_INCOMPATIBLE_DEVICE_ERROR:
|
|
/* needs disable slot command to recover */
|
|
xhci_warn(xhci,
|
|
"WARN: detect an incompatible device for slot %u ep %u",
|
|
slot_id, ep_index);
|
|
status = -EPROTO;
|
|
break;
|
|
default:
|
|
if (xhci_is_vendor_info_code(xhci, trb_comp_code)) {
|
|
status = 0;
|
|
break;
|
|
}
|
|
xhci_warn(xhci,
|
|
"ERROR Unknown event condition %u for slot %u ep %u , HC probably busted\n",
|
|
trb_comp_code, slot_id, ep_index);
|
|
goto cleanup;
|
|
}
|
|
|
|
do {
|
|
/* This TRB should be in the TD at the head of this ring's
|
|
* TD list.
|
|
*/
|
|
if (list_empty(&ep_ring->td_list)) {
|
|
/*
|
|
* Don't print wanings if it's due to a stopped endpoint
|
|
* generating an extra completion event if the device
|
|
* was suspended. Or, a event for the last TRB of a
|
|
* short TD we already got a short event for.
|
|
* The short TD is already removed from the TD list.
|
|
*/
|
|
|
|
if (!(trb_comp_code == COMP_STOPPED ||
|
|
trb_comp_code == COMP_STOPPED_LENGTH_INVALID ||
|
|
ep_ring->last_td_was_short)) {
|
|
xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
|
|
TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
|
|
ep_index);
|
|
}
|
|
if (ep->skip) {
|
|
ep->skip = false;
|
|
xhci_dbg(xhci, "td_list is empty while skip flag set. Clear skip flag for slot %u ep %u.\n",
|
|
slot_id, ep_index);
|
|
}
|
|
if (trb_comp_code == COMP_STALL_ERROR ||
|
|
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
|
|
trb_comp_code)) {
|
|
xhci_handle_halted_endpoint(xhci, ep,
|
|
ep_ring->stream_id,
|
|
NULL,
|
|
EP_HARD_RESET);
|
|
}
|
|
goto cleanup;
|
|
}
|
|
|
|
/* We've skipped all the TDs on the ep ring when ep->skip set */
|
|
if (ep->skip && td_num == 0) {
|
|
ep->skip = false;
|
|
xhci_dbg(xhci, "All tds on the ep_ring skipped. Clear skip flag for slot %u ep %u.\n",
|
|
slot_id, ep_index);
|
|
goto cleanup;
|
|
}
|
|
|
|
td = list_first_entry(&ep_ring->td_list, struct xhci_td,
|
|
td_list);
|
|
if (ep->skip)
|
|
td_num--;
|
|
|
|
/* Is this a TRB in the currently executing TD? */
|
|
ep_seg = trb_in_td(xhci, ep_ring->deq_seg, ep_ring->dequeue,
|
|
td->last_trb, ep_trb_dma, false);
|
|
|
|
/*
|
|
* Skip the Force Stopped Event. The event_trb(event_dma) of FSE
|
|
* is not in the current TD pointed by ep_ring->dequeue because
|
|
* that the hardware dequeue pointer still at the previous TRB
|
|
* of the current TD. The previous TRB maybe a Link TD or the
|
|
* last TRB of the previous TD. The command completion handle
|
|
* will take care the rest.
|
|
*/
|
|
if (!ep_seg && (trb_comp_code == COMP_STOPPED ||
|
|
trb_comp_code == COMP_STOPPED_LENGTH_INVALID)) {
|
|
goto cleanup;
|
|
}
|
|
|
|
if (!ep_seg) {
|
|
if (!ep->skip ||
|
|
!usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
|
|
/* Some host controllers give a spurious
|
|
* successful event after a short transfer.
|
|
* Ignore it.
|
|
*/
|
|
if ((xhci->quirks & XHCI_SPURIOUS_SUCCESS) &&
|
|
ep_ring->last_td_was_short) {
|
|
ep_ring->last_td_was_short = false;
|
|
goto cleanup;
|
|
}
|
|
/* HC is busted, give up! */
|
|
xhci_err(xhci,
|
|
"ERROR Transfer event TRB DMA ptr not "
|
|
"part of current TD ep_index %d "
|
|
"comp_code %u\n", ep_index,
|
|
trb_comp_code);
|
|
trb_in_td(xhci, ep_ring->deq_seg,
|
|
ep_ring->dequeue, td->last_trb,
|
|
ep_trb_dma, true);
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
skip_isoc_td(xhci, td, ep, status);
|
|
goto cleanup;
|
|
}
|
|
if (trb_comp_code == COMP_SHORT_PACKET)
|
|
ep_ring->last_td_was_short = true;
|
|
else
|
|
ep_ring->last_td_was_short = false;
|
|
|
|
if (ep->skip) {
|
|
xhci_dbg(xhci,
|
|
"Found td. Clear skip flag for slot %u ep %u.\n",
|
|
slot_id, ep_index);
|
|
ep->skip = false;
|
|
}
|
|
|
|
ep_trb = &ep_seg->trbs[(ep_trb_dma - ep_seg->dma) /
|
|
sizeof(*ep_trb)];
|
|
|
|
trace_xhci_handle_transfer(ep_ring,
|
|
(struct xhci_generic_trb *) ep_trb);
|
|
|
|
/*
|
|
* No-op TRB could trigger interrupts in a case where
|
|
* a URB was killed and a STALL_ERROR happens right
|
|
* after the endpoint ring stopped. Reset the halted
|
|
* endpoint. Otherwise, the endpoint remains stalled
|
|
* indefinitely.
|
|
*/
|
|
|
|
if (trb_is_noop(ep_trb)) {
|
|
if (trb_comp_code == COMP_STALL_ERROR ||
|
|
xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
|
|
trb_comp_code))
|
|
xhci_handle_halted_endpoint(xhci, ep,
|
|
ep_ring->stream_id,
|
|
td, EP_HARD_RESET);
|
|
goto cleanup;
|
|
}
|
|
|
|
td->status = status;
|
|
|
|
/* update the urb's actual_length and give back to the core */
|
|
if (usb_endpoint_xfer_control(&td->urb->ep->desc))
|
|
process_ctrl_td(xhci, ep, ep_ring, td, ep_trb, event);
|
|
else if (usb_endpoint_xfer_isoc(&td->urb->ep->desc))
|
|
process_isoc_td(xhci, ep, ep_ring, td, ep_trb, event);
|
|
else
|
|
process_bulk_intr_td(xhci, ep, ep_ring, td, ep_trb, event);
|
|
cleanup:
|
|
handling_skipped_tds = ep->skip &&
|
|
trb_comp_code != COMP_MISSED_SERVICE_ERROR &&
|
|
trb_comp_code != COMP_NO_PING_RESPONSE_ERROR;
|
|
|
|
/*
|
|
* Do not update event ring dequeue pointer if we're in a loop
|
|
* processing missed tds.
|
|
*/
|
|
if (!handling_skipped_tds)
|
|
inc_deq(xhci, xhci->event_ring);
|
|
|
|
/*
|
|
* If ep->skip is set, it means there are missed tds on the
|
|
* endpoint ring need to take care of.
|
|
* Process them as short transfer until reach the td pointed by
|
|
* the event.
|
|
*/
|
|
} while (handling_skipped_tds);
|
|
|
|
return 0;
|
|
|
|
err_out:
|
|
xhci_err(xhci, "@%016llx %08x %08x %08x %08x\n",
|
|
(unsigned long long) xhci_trb_virt_to_dma(
|
|
xhci->event_ring->deq_seg,
|
|
xhci->event_ring->dequeue),
|
|
lower_32_bits(le64_to_cpu(event->buffer)),
|
|
upper_32_bits(le64_to_cpu(event->buffer)),
|
|
le32_to_cpu(event->transfer_len),
|
|
le32_to_cpu(event->flags));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* This function handles all OS-owned events on the event ring. It may drop
|
|
* xhci->lock between event processing (e.g. to pass up port status changes).
|
|
* Returns >0 for "possibly more events to process" (caller should call again),
|
|
* otherwise 0 if done. In future, <0 returns should indicate error code.
|
|
*/
|
|
static int xhci_handle_event(struct xhci_hcd *xhci)
|
|
{
|
|
union xhci_trb *event;
|
|
int update_ptrs = 1;
|
|
u32 trb_type;
|
|
int ret;
|
|
|
|
/* Event ring hasn't been allocated yet. */
|
|
if (!xhci->event_ring || !xhci->event_ring->dequeue) {
|
|
xhci_err(xhci, "ERROR event ring not ready\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
event = xhci->event_ring->dequeue;
|
|
/* Does the HC or OS own the TRB? */
|
|
if ((le32_to_cpu(event->event_cmd.flags) & TRB_CYCLE) !=
|
|
xhci->event_ring->cycle_state)
|
|
return 0;
|
|
|
|
trace_xhci_handle_event(xhci->event_ring, &event->generic);
|
|
|
|
/*
|
|
* Barrier between reading the TRB_CYCLE (valid) flag above and any
|
|
* speculative reads of the event's flags/data below.
|
|
*/
|
|
rmb();
|
|
trb_type = TRB_FIELD_TO_TYPE(le32_to_cpu(event->event_cmd.flags));
|
|
/* FIXME: Handle more event types. */
|
|
|
|
switch (trb_type) {
|
|
case TRB_COMPLETION:
|
|
handle_cmd_completion(xhci, &event->event_cmd);
|
|
break;
|
|
case TRB_PORT_STATUS:
|
|
handle_port_status(xhci, event);
|
|
update_ptrs = 0;
|
|
break;
|
|
case TRB_TRANSFER:
|
|
ret = handle_tx_event(xhci, &event->trans_event);
|
|
if (ret >= 0)
|
|
update_ptrs = 0;
|
|
break;
|
|
case TRB_DEV_NOTE:
|
|
handle_device_notification(xhci, event);
|
|
break;
|
|
default:
|
|
if (trb_type >= TRB_VENDOR_DEFINED_LOW)
|
|
handle_vendor_event(xhci, event, trb_type);
|
|
else
|
|
xhci_warn(xhci, "ERROR unknown event type %d\n", trb_type);
|
|
}
|
|
/* Any of the above functions may drop and re-acquire the lock, so check
|
|
* to make sure a watchdog timer didn't mark the host as non-responsive.
|
|
*/
|
|
if (xhci->xhc_state & XHCI_STATE_DYING) {
|
|
xhci_dbg(xhci, "xHCI host dying, returning from "
|
|
"event handler.\n");
|
|
return 0;
|
|
}
|
|
|
|
if (update_ptrs)
|
|
/* Update SW event ring dequeue pointer */
|
|
inc_deq(xhci, xhci->event_ring);
|
|
|
|
/* Are there more items on the event ring? Caller will call us again to
|
|
* check.
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
/*
|
|
* Update Event Ring Dequeue Pointer:
|
|
* - When all events have finished
|
|
* - To avoid "Event Ring Full Error" condition
|
|
*/
|
|
static void xhci_update_erst_dequeue(struct xhci_hcd *xhci,
|
|
union xhci_trb *event_ring_deq)
|
|
{
|
|
u64 temp_64;
|
|
dma_addr_t deq;
|
|
|
|
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
|
|
/* If necessary, update the HW's version of the event ring deq ptr. */
|
|
if (event_ring_deq != xhci->event_ring->dequeue) {
|
|
deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
|
|
xhci->event_ring->dequeue);
|
|
if (deq == 0)
|
|
xhci_warn(xhci, "WARN something wrong with SW event ring dequeue ptr\n");
|
|
/*
|
|
* Per 4.9.4, Software writes to the ERDP register shall
|
|
* always advance the Event Ring Dequeue Pointer value.
|
|
*/
|
|
if ((temp_64 & (u64) ~ERST_PTR_MASK) ==
|
|
((u64) deq & (u64) ~ERST_PTR_MASK))
|
|
return;
|
|
|
|
/* Update HC event ring dequeue pointer */
|
|
temp_64 &= ERST_PTR_MASK;
|
|
temp_64 |= ((u64) deq & (u64) ~ERST_PTR_MASK);
|
|
}
|
|
|
|
/* Clear the event handler busy flag (RW1C) */
|
|
temp_64 |= ERST_EHB;
|
|
xhci_write_64(xhci, temp_64, &xhci->ir_set->erst_dequeue);
|
|
}
|
|
|
|
/*
|
|
* xHCI spec says we can get an interrupt, and if the HC has an error condition,
|
|
* we might get bad data out of the event ring. Section 4.10.2.7 has a list of
|
|
* indicators of an event TRB error, but we check the status *first* to be safe.
|
|
*/
|
|
irqreturn_t xhci_irq(struct usb_hcd *hcd)
|
|
{
|
|
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
|
|
union xhci_trb *event_ring_deq;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u64 temp_64;
|
|
u32 status;
|
|
int event_loop = 0;
|
|
|
|
spin_lock(&xhci->lock);
|
|
/* Check if the xHC generated the interrupt, or the irq is shared */
|
|
status = readl(&xhci->op_regs->status);
|
|
if (status == ~(u32)0) {
|
|
xhci_hc_died(xhci);
|
|
ret = IRQ_HANDLED;
|
|
goto out;
|
|
}
|
|
|
|
if (!(status & STS_EINT))
|
|
goto out;
|
|
|
|
if (status & STS_FATAL) {
|
|
xhci_warn(xhci, "WARNING: Host System Error\n");
|
|
xhci_halt(xhci);
|
|
ret = IRQ_HANDLED;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Clear the op reg interrupt status first,
|
|
* so we can receive interrupts from other MSI-X interrupters.
|
|
* Write 1 to clear the interrupt status.
|
|
*/
|
|
status |= STS_EINT;
|
|
writel(status, &xhci->op_regs->status);
|
|
|
|
if (!hcd->msi_enabled) {
|
|
u32 irq_pending;
|
|
irq_pending = readl(&xhci->ir_set->irq_pending);
|
|
irq_pending |= IMAN_IP;
|
|
writel(irq_pending, &xhci->ir_set->irq_pending);
|
|
}
|
|
|
|
if (xhci->xhc_state & XHCI_STATE_DYING ||
|
|
xhci->xhc_state & XHCI_STATE_HALTED) {
|
|
xhci_dbg(xhci, "xHCI dying, ignoring interrupt. "
|
|
"Shouldn't IRQs be disabled?\n");
|
|
/* Clear the event handler busy flag (RW1C);
|
|
* the event ring should be empty.
|
|
*/
|
|
temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
|
|
xhci_write_64(xhci, temp_64 | ERST_EHB,
|
|
&xhci->ir_set->erst_dequeue);
|
|
ret = IRQ_HANDLED;
|
|
goto out;
|
|
}
|
|
|
|
event_ring_deq = xhci->event_ring->dequeue;
|
|
/* FIXME this should be a delayed service routine
|
|
* that clears the EHB.
|
|
*/
|
|
while (xhci_handle_event(xhci) > 0) {
|
|
if (event_loop++ < TRBS_PER_SEGMENT / 2)
|
|
continue;
|
|
xhci_update_erst_dequeue(xhci, event_ring_deq);
|
|
|
|
/* ring is half-full, force isoc trbs to interrupt more often */
|
|
if (xhci->isoc_bei_interval > AVOID_BEI_INTERVAL_MIN)
|
|
xhci->isoc_bei_interval = xhci->isoc_bei_interval / 2;
|
|
|
|
event_loop = 0;
|
|
}
|
|
|
|
xhci_update_erst_dequeue(xhci, event_ring_deq);
|
|
ret = IRQ_HANDLED;
|
|
|
|
out:
|
|
spin_unlock(&xhci->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
irqreturn_t xhci_msi_irq(int irq, void *hcd)
|
|
{
|
|
return xhci_irq(hcd);
|
|
}
|
|
|
|
/**** Endpoint Ring Operations ****/
|
|
|
|
/*
|
|
* Generic function for queueing a TRB on a ring.
|
|
* The caller must have checked to make sure there's room on the ring.
|
|
*
|
|
* @more_trbs_coming: Will you enqueue more TRBs before calling
|
|
* prepare_transfer()?
|
|
*/
|
|
static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
|
|
bool more_trbs_coming,
|
|
u32 field1, u32 field2, u32 field3, u32 field4)
|
|
{
|
|
struct xhci_generic_trb *trb;
|
|
|
|
trb = &ring->enqueue->generic;
|
|
trb->field[0] = cpu_to_le32(field1);
|
|
trb->field[1] = cpu_to_le32(field2);
|
|
trb->field[2] = cpu_to_le32(field3);
|
|
/* make sure TRB is fully written before giving it to the controller */
|
|
wmb();
|
|
trb->field[3] = cpu_to_le32(field4);
|
|
|
|
trace_xhci_queue_trb(ring, trb);
|
|
|
|
inc_enq(xhci, ring, more_trbs_coming);
|
|
}
|
|
|
|
/*
|
|
* Does various checks on the endpoint ring, and makes it ready to queue num_trbs.
|
|
* FIXME allocate segments if the ring is full.
|
|
*/
|
|
static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
|
|
u32 ep_state, unsigned int num_trbs, gfp_t mem_flags)
|
|
{
|
|
unsigned int num_trbs_needed;
|
|
unsigned int link_trb_count = 0;
|
|
|
|
/* Make sure the endpoint has been added to xHC schedule */
|
|
switch (ep_state) {
|
|
case EP_STATE_DISABLED:
|
|
/*
|
|
* USB core changed config/interfaces without notifying us,
|
|
* or hardware is reporting the wrong state.
|
|
*/
|
|
xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
|
|
return -ENOENT;
|
|
case EP_STATE_ERROR:
|
|
xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
|
|
/* FIXME event handling code for error needs to clear it */
|
|
/* XXX not sure if this should be -ENOENT or not */
|
|
return -EINVAL;
|
|
case EP_STATE_HALTED:
|
|
xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
|
|
break;
|
|
case EP_STATE_STOPPED:
|
|
case EP_STATE_RUNNING:
|
|
break;
|
|
default:
|
|
xhci_err(xhci, "ERROR unknown endpoint state for ep\n");
|
|
/*
|
|
* FIXME issue Configure Endpoint command to try to get the HC
|
|
* back into a known state.
|
|
*/
|
|
return -EINVAL;
|
|
}
|
|
|
|
while (1) {
|
|
if (room_on_ring(xhci, ep_ring, num_trbs))
|
|
break;
|
|
|
|
if (ep_ring == xhci->cmd_ring) {
|
|
xhci_err(xhci, "Do not support expand command ring\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion,
|
|
"ERROR no room on ep ring, try ring expansion");
|
|
num_trbs_needed = num_trbs - ep_ring->num_trbs_free;
|
|
if (xhci_ring_expansion(xhci, ep_ring, num_trbs_needed,
|
|
mem_flags)) {
|
|
xhci_err(xhci, "Ring expansion failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
while (trb_is_link(ep_ring->enqueue)) {
|
|
/* If we're not dealing with 0.95 hardware or isoc rings
|
|
* on AMD 0.96 host, clear the chain bit.
|
|
*/
|
|
if (!xhci_link_trb_quirk(xhci) &&
|
|
!(ep_ring->type == TYPE_ISOC &&
|
|
(xhci->quirks & XHCI_AMD_0x96_HOST)))
|
|
ep_ring->enqueue->link.control &=
|
|
cpu_to_le32(~TRB_CHAIN);
|
|
else
|
|
ep_ring->enqueue->link.control |=
|
|
cpu_to_le32(TRB_CHAIN);
|
|
|
|
wmb();
|
|
ep_ring->enqueue->link.control ^= cpu_to_le32(TRB_CYCLE);
|
|
|
|
/* Toggle the cycle bit after the last ring segment. */
|
|
if (link_trb_toggles_cycle(ep_ring->enqueue))
|
|
ep_ring->cycle_state ^= 1;
|
|
|
|
ep_ring->enq_seg = ep_ring->enq_seg->next;
|
|
ep_ring->enqueue = ep_ring->enq_seg->trbs;
|
|
|
|
/* prevent infinite loop if all first trbs are link trbs */
|
|
if (link_trb_count++ > ep_ring->num_segs) {
|
|
xhci_warn(xhci, "Ring is an endless link TRB loop\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
if (last_trb_on_seg(ep_ring->enq_seg, ep_ring->enqueue)) {
|
|
xhci_warn(xhci, "Missing link TRB at end of ring segment\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int prepare_transfer(struct xhci_hcd *xhci,
|
|
struct xhci_virt_device *xdev,
|
|
unsigned int ep_index,
|
|
unsigned int stream_id,
|
|
unsigned int num_trbs,
|
|
struct urb *urb,
|
|
unsigned int td_index,
|
|
gfp_t mem_flags)
|
|
{
|
|
int ret;
|
|
struct urb_priv *urb_priv;
|
|
struct xhci_td *td;
|
|
struct xhci_ring *ep_ring;
|
|
struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
|
|
|
|
ep_ring = xhci_triad_to_transfer_ring(xhci, xdev->slot_id, ep_index,
|
|
stream_id);
|
|
if (!ep_ring) {
|
|
xhci_dbg(xhci, "Can't prepare ring for bad stream ID %u\n",
|
|
stream_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
|
|
num_trbs, mem_flags);
|
|
if (ret)
|
|
return ret;
|
|
|
|
urb_priv = urb->hcpriv;
|
|
td = &urb_priv->td[td_index];
|
|
|
|
INIT_LIST_HEAD(&td->td_list);
|
|
INIT_LIST_HEAD(&td->cancelled_td_list);
|
|
|
|
if (td_index == 0) {
|
|
ret = usb_hcd_link_urb_to_ep(bus_to_hcd(urb->dev->bus), urb);
|
|
if (unlikely(ret))
|
|
return ret;
|
|
}
|
|
|
|
td->urb = urb;
|
|
/* Add this TD to the tail of the endpoint ring's TD list */
|
|
list_add_tail(&td->td_list, &ep_ring->td_list);
|
|
td->start_seg = ep_ring->enq_seg;
|
|
td->first_trb = ep_ring->enqueue;
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned int count_trbs(u64 addr, u64 len)
|
|
{
|
|
unsigned int num_trbs;
|
|
|
|
num_trbs = DIV_ROUND_UP(len + (addr & (TRB_MAX_BUFF_SIZE - 1)),
|
|
TRB_MAX_BUFF_SIZE);
|
|
if (num_trbs == 0)
|
|
num_trbs++;
|
|
|
|
return num_trbs;
|
|
}
|
|
|
|
static inline unsigned int count_trbs_needed(struct urb *urb)
|
|
{
|
|
return count_trbs(urb->transfer_dma, urb->transfer_buffer_length);
|
|
}
|
|
|
|
static unsigned int count_sg_trbs_needed(struct urb *urb)
|
|
{
|
|
struct scatterlist *sg;
|
|
unsigned int i, len, full_len, num_trbs = 0;
|
|
|
|
full_len = urb->transfer_buffer_length;
|
|
|
|
for_each_sg(urb->sg, sg, urb->num_mapped_sgs, i) {
|
|
len = sg_dma_len(sg);
|
|
num_trbs += count_trbs(sg_dma_address(sg), len);
|
|
len = min_t(unsigned int, len, full_len);
|
|
full_len -= len;
|
|
if (full_len == 0)
|
|
break;
|
|
}
|
|
|
|
return num_trbs;
|
|
}
|
|
|
|
static unsigned int count_isoc_trbs_needed(struct urb *urb, int i)
|
|
{
|
|
u64 addr, len;
|
|
|
|
addr = (u64) (urb->transfer_dma + urb->iso_frame_desc[i].offset);
|
|
len = urb->iso_frame_desc[i].length;
|
|
|
|
return count_trbs(addr, len);
|
|
}
|
|
|
|
static void check_trb_math(struct urb *urb, int running_total)
|
|
{
|
|
if (unlikely(running_total != urb->transfer_buffer_length))
|
|
dev_err(&urb->dev->dev, "%s - ep %#x - Miscalculated tx length, "
|
|
"queued %#x (%d), asked for %#x (%d)\n",
|
|
__func__,
|
|
urb->ep->desc.bEndpointAddress,
|
|
running_total, running_total,
|
|
urb->transfer_buffer_length,
|
|
urb->transfer_buffer_length);
|
|
}
|
|
|
|
static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id,
|
|
unsigned int ep_index, unsigned int stream_id, int start_cycle,
|
|
struct xhci_generic_trb *start_trb)
|
|
{
|
|
/*
|
|
* Pass all the TRBs to the hardware at once and make sure this write
|
|
* isn't reordered.
|
|
*/
|
|
wmb();
|
|
if (start_cycle)
|
|
start_trb->field[3] |= cpu_to_le32(start_cycle);
|
|
else
|
|
start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE);
|
|
xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id);
|
|
}
|
|
|
|
static void check_interval(struct xhci_hcd *xhci, struct urb *urb,
|
|
struct xhci_ep_ctx *ep_ctx)
|
|
{
|
|
int xhci_interval;
|
|
int ep_interval;
|
|
|
|
xhci_interval = EP_INTERVAL_TO_UFRAMES(le32_to_cpu(ep_ctx->ep_info));
|
|
ep_interval = urb->interval;
|
|
|
|
/* Convert to microframes */
|
|
if (urb->dev->speed == USB_SPEED_LOW ||
|
|
urb->dev->speed == USB_SPEED_FULL)
|
|
ep_interval *= 8;
|
|
|
|
/* FIXME change this to a warning and a suggestion to use the new API
|
|
* to set the polling interval (once the API is added).
|
|
*/
|
|
if (xhci_interval != ep_interval) {
|
|
dev_dbg_ratelimited(&urb->dev->dev,
|
|
"Driver uses different interval (%d microframe%s) than xHCI (%d microframe%s)\n",
|
|
ep_interval, ep_interval == 1 ? "" : "s",
|
|
xhci_interval, xhci_interval == 1 ? "" : "s");
|
|
urb->interval = xhci_interval;
|
|
/* Convert back to frames for LS/FS devices */
|
|
if (urb->dev->speed == USB_SPEED_LOW ||
|
|
urb->dev->speed == USB_SPEED_FULL)
|
|
urb->interval /= 8;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* xHCI uses normal TRBs for both bulk and interrupt. When the interrupt
|
|
* endpoint is to be serviced, the xHC will consume (at most) one TD. A TD
|
|
* (comprised of sg list entries) can take several service intervals to
|
|
* transmit.
|
|
*/
|
|
int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|
struct urb *urb, int slot_id, unsigned int ep_index)
|
|
{
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
|
|
ep_ctx = xhci_get_ep_ctx(xhci, xhci->devs[slot_id]->out_ctx, ep_index);
|
|
check_interval(xhci, urb, ep_ctx);
|
|
|
|
return xhci_queue_bulk_tx(xhci, mem_flags, urb, slot_id, ep_index);
|
|
}
|
|
|
|
/*
|
|
* For xHCI 1.0 host controllers, TD size is the number of max packet sized
|
|
* packets remaining in the TD (*not* including this TRB).
|
|
*
|
|
* Total TD packet count = total_packet_count =
|
|
* DIV_ROUND_UP(TD size in bytes / wMaxPacketSize)
|
|
*
|
|
* Packets transferred up to and including this TRB = packets_transferred =
|
|
* rounddown(total bytes transferred including this TRB / wMaxPacketSize)
|
|
*
|
|
* TD size = total_packet_count - packets_transferred
|
|
*
|
|
* For xHCI 0.96 and older, TD size field should be the remaining bytes
|
|
* including this TRB, right shifted by 10
|
|
*
|
|
* For all hosts it must fit in bits 21:17, so it can't be bigger than 31.
|
|
* This is taken care of in the TRB_TD_SIZE() macro
|
|
*
|
|
* The last TRB in a TD must have the TD size set to zero.
|
|
*/
|
|
static u32 xhci_td_remainder(struct xhci_hcd *xhci, int transferred,
|
|
int trb_buff_len, unsigned int td_total_len,
|
|
struct urb *urb, bool more_trbs_coming)
|
|
{
|
|
u32 maxp, total_packet_count;
|
|
|
|
/* MTK xHCI 0.96 contains some features from 1.0 */
|
|
if (xhci->hci_version < 0x100 && !(xhci->quirks & XHCI_MTK_HOST))
|
|
return ((td_total_len - transferred) >> 10);
|
|
|
|
/* One TRB with a zero-length data packet. */
|
|
if (!more_trbs_coming || (transferred == 0 && trb_buff_len == 0) ||
|
|
trb_buff_len == td_total_len)
|
|
return 0;
|
|
|
|
/* for MTK xHCI 0.96, TD size include this TRB, but not in 1.x */
|
|
if ((xhci->quirks & XHCI_MTK_HOST) && (xhci->hci_version < 0x100))
|
|
trb_buff_len = 0;
|
|
|
|
maxp = usb_endpoint_maxp(&urb->ep->desc);
|
|
total_packet_count = DIV_ROUND_UP(td_total_len, maxp);
|
|
|
|
/* Queueing functions don't count the current TRB into transferred */
|
|
return (total_packet_count - ((transferred + trb_buff_len) / maxp));
|
|
}
|
|
|
|
|
|
static int xhci_align_td(struct xhci_hcd *xhci, struct urb *urb, u32 enqd_len,
|
|
u32 *trb_buff_len, struct xhci_segment *seg)
|
|
{
|
|
struct device *dev = xhci_to_hcd(xhci)->self.controller;
|
|
unsigned int unalign;
|
|
unsigned int max_pkt;
|
|
u32 new_buff_len;
|
|
size_t len;
|
|
|
|
max_pkt = usb_endpoint_maxp(&urb->ep->desc);
|
|
unalign = (enqd_len + *trb_buff_len) % max_pkt;
|
|
|
|
/* we got lucky, last normal TRB data on segment is packet aligned */
|
|
if (unalign == 0)
|
|
return 0;
|
|
|
|
xhci_dbg(xhci, "Unaligned %d bytes, buff len %d\n",
|
|
unalign, *trb_buff_len);
|
|
|
|
/* is the last nornal TRB alignable by splitting it */
|
|
if (*trb_buff_len > unalign) {
|
|
*trb_buff_len -= unalign;
|
|
xhci_dbg(xhci, "split align, new buff len %d\n", *trb_buff_len);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We want enqd_len + trb_buff_len to sum up to a number aligned to
|
|
* number which is divisible by the endpoint's wMaxPacketSize. IOW:
|
|
* (size of currently enqueued TRBs + remainder) % wMaxPacketSize == 0.
|
|
*/
|
|
new_buff_len = max_pkt - (enqd_len % max_pkt);
|
|
|
|
if (new_buff_len > (urb->transfer_buffer_length - enqd_len))
|
|
new_buff_len = (urb->transfer_buffer_length - enqd_len);
|
|
|
|
/* create a max max_pkt sized bounce buffer pointed to by last trb */
|
|
if (usb_urb_dir_out(urb)) {
|
|
if (urb->num_sgs) {
|
|
len = sg_pcopy_to_buffer(urb->sg, urb->num_sgs,
|
|
seg->bounce_buf, new_buff_len, enqd_len);
|
|
if (len != new_buff_len)
|
|
xhci_warn(xhci, "WARN Wrong bounce buffer write length: %zu != %d\n",
|
|
len, new_buff_len);
|
|
} else {
|
|
memcpy(seg->bounce_buf, urb->transfer_buffer + enqd_len, new_buff_len);
|
|
}
|
|
|
|
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
|
|
max_pkt, DMA_TO_DEVICE);
|
|
} else {
|
|
seg->bounce_dma = dma_map_single(dev, seg->bounce_buf,
|
|
max_pkt, DMA_FROM_DEVICE);
|
|
}
|
|
|
|
if (dma_mapping_error(dev, seg->bounce_dma)) {
|
|
/* try without aligning. Some host controllers survive */
|
|
xhci_warn(xhci, "Failed mapping bounce buffer, not aligning\n");
|
|
return 0;
|
|
}
|
|
*trb_buff_len = new_buff_len;
|
|
seg->bounce_len = new_buff_len;
|
|
seg->bounce_offs = enqd_len;
|
|
|
|
xhci_dbg(xhci, "Bounce align, new buff len %d\n", *trb_buff_len);
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* This is very similar to what ehci-q.c qtd_fill() does */
|
|
int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|
struct urb *urb, int slot_id, unsigned int ep_index)
|
|
{
|
|
struct xhci_ring *ring;
|
|
struct urb_priv *urb_priv;
|
|
struct xhci_td *td;
|
|
struct xhci_generic_trb *start_trb;
|
|
struct scatterlist *sg = NULL;
|
|
bool more_trbs_coming = true;
|
|
bool need_zero_pkt = false;
|
|
bool first_trb = true;
|
|
unsigned int num_trbs;
|
|
unsigned int start_cycle, num_sgs = 0;
|
|
unsigned int enqd_len, block_len, trb_buff_len, full_len;
|
|
int sent_len, ret;
|
|
u32 field, length_field, remainder;
|
|
u64 addr, send_addr;
|
|
|
|
ring = xhci_urb_to_transfer_ring(xhci, urb);
|
|
if (!ring)
|
|
return -EINVAL;
|
|
|
|
full_len = urb->transfer_buffer_length;
|
|
/* If we have scatter/gather list, we use it. */
|
|
if (urb->num_sgs && !(urb->transfer_flags & URB_DMA_MAP_SINGLE)) {
|
|
num_sgs = urb->num_mapped_sgs;
|
|
sg = urb->sg;
|
|
addr = (u64) sg_dma_address(sg);
|
|
block_len = sg_dma_len(sg);
|
|
num_trbs = count_sg_trbs_needed(urb);
|
|
} else {
|
|
num_trbs = count_trbs_needed(urb);
|
|
addr = (u64) urb->transfer_dma;
|
|
block_len = full_len;
|
|
}
|
|
ret = prepare_transfer(xhci, xhci->devs[slot_id],
|
|
ep_index, urb->stream_id,
|
|
num_trbs, urb, 0, mem_flags);
|
|
if (unlikely(ret < 0))
|
|
return ret;
|
|
|
|
urb_priv = urb->hcpriv;
|
|
|
|
/* Deal with URB_ZERO_PACKET - need one more td/trb */
|
|
if (urb->transfer_flags & URB_ZERO_PACKET && urb_priv->num_tds > 1)
|
|
need_zero_pkt = true;
|
|
|
|
td = &urb_priv->td[0];
|
|
|
|
/*
|
|
* Don't give the first TRB to the hardware (by toggling the cycle bit)
|
|
* until we've finished creating all the other TRBs. The ring's cycle
|
|
* state may change as we enqueue the other TRBs, so save it too.
|
|
*/
|
|
start_trb = &ring->enqueue->generic;
|
|
start_cycle = ring->cycle_state;
|
|
send_addr = addr;
|
|
|
|
/* Queue the TRBs, even if they are zero-length */
|
|
for (enqd_len = 0; first_trb || enqd_len < full_len;
|
|
enqd_len += trb_buff_len) {
|
|
field = TRB_TYPE(TRB_NORMAL);
|
|
|
|
/* TRB buffer should not cross 64KB boundaries */
|
|
trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
|
|
trb_buff_len = min_t(unsigned int, trb_buff_len, block_len);
|
|
|
|
if (enqd_len + trb_buff_len > full_len)
|
|
trb_buff_len = full_len - enqd_len;
|
|
|
|
/* Don't change the cycle bit of the first TRB until later */
|
|
if (first_trb) {
|
|
first_trb = false;
|
|
if (start_cycle == 0)
|
|
field |= TRB_CYCLE;
|
|
} else
|
|
field |= ring->cycle_state;
|
|
|
|
/* Chain all the TRBs together; clear the chain bit in the last
|
|
* TRB to indicate it's the last TRB in the chain.
|
|
*/
|
|
if (enqd_len + trb_buff_len < full_len) {
|
|
field |= TRB_CHAIN;
|
|
if (trb_is_link(ring->enqueue + 1)) {
|
|
if (xhci_align_td(xhci, urb, enqd_len,
|
|
&trb_buff_len,
|
|
ring->enq_seg)) {
|
|
send_addr = ring->enq_seg->bounce_dma;
|
|
/* assuming TD won't span 2 segs */
|
|
td->bounce_seg = ring->enq_seg;
|
|
}
|
|
}
|
|
}
|
|
if (enqd_len + trb_buff_len >= full_len) {
|
|
field &= ~TRB_CHAIN;
|
|
field |= TRB_IOC;
|
|
more_trbs_coming = false;
|
|
td->last_trb = ring->enqueue;
|
|
td->last_trb_seg = ring->enq_seg;
|
|
if (xhci_urb_suitable_for_idt(urb)) {
|
|
memcpy(&send_addr, urb->transfer_buffer,
|
|
trb_buff_len);
|
|
le64_to_cpus(&send_addr);
|
|
field |= TRB_IDT;
|
|
}
|
|
}
|
|
|
|
/* Only set interrupt on short packet for IN endpoints */
|
|
if (usb_urb_dir_in(urb))
|
|
field |= TRB_ISP;
|
|
|
|
/* Set the TRB length, TD size, and interrupter fields. */
|
|
remainder = xhci_td_remainder(xhci, enqd_len, trb_buff_len,
|
|
full_len, urb, more_trbs_coming);
|
|
|
|
length_field = TRB_LEN(trb_buff_len) |
|
|
TRB_TD_SIZE(remainder) |
|
|
TRB_INTR_TARGET(0);
|
|
|
|
queue_trb(xhci, ring, more_trbs_coming | need_zero_pkt,
|
|
lower_32_bits(send_addr),
|
|
upper_32_bits(send_addr),
|
|
length_field,
|
|
field);
|
|
td->num_trbs++;
|
|
addr += trb_buff_len;
|
|
sent_len = trb_buff_len;
|
|
|
|
while (sg && sent_len >= block_len) {
|
|
/* New sg entry */
|
|
--num_sgs;
|
|
sent_len -= block_len;
|
|
sg = sg_next(sg);
|
|
if (num_sgs != 0 && sg) {
|
|
block_len = sg_dma_len(sg);
|
|
addr = (u64) sg_dma_address(sg);
|
|
addr += sent_len;
|
|
}
|
|
}
|
|
block_len -= sent_len;
|
|
send_addr = addr;
|
|
}
|
|
|
|
if (need_zero_pkt) {
|
|
ret = prepare_transfer(xhci, xhci->devs[slot_id],
|
|
ep_index, urb->stream_id,
|
|
1, urb, 1, mem_flags);
|
|
urb_priv->td[1].last_trb = ring->enqueue;
|
|
urb_priv->td[1].last_trb_seg = ring->enq_seg;
|
|
field = TRB_TYPE(TRB_NORMAL) | ring->cycle_state | TRB_IOC;
|
|
queue_trb(xhci, ring, 0, 0, 0, TRB_INTR_TARGET(0), field);
|
|
urb_priv->td[1].num_trbs++;
|
|
}
|
|
|
|
check_trb_math(urb, enqd_len);
|
|
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
|
|
start_cycle, start_trb);
|
|
return 0;
|
|
}
|
|
|
|
/* Caller must have locked xhci->lock */
|
|
int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|
struct urb *urb, int slot_id, unsigned int ep_index)
|
|
{
|
|
struct xhci_ring *ep_ring;
|
|
int num_trbs;
|
|
int ret;
|
|
struct usb_ctrlrequest *setup;
|
|
struct xhci_generic_trb *start_trb;
|
|
int start_cycle;
|
|
u32 field;
|
|
struct urb_priv *urb_priv;
|
|
struct xhci_td *td;
|
|
|
|
ep_ring = xhci_urb_to_transfer_ring(xhci, urb);
|
|
if (!ep_ring)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* Need to copy setup packet into setup TRB, so we can't use the setup
|
|
* DMA address.
|
|
*/
|
|
if (!urb->setup_packet)
|
|
return -EINVAL;
|
|
|
|
/* 1 TRB for setup, 1 for status */
|
|
num_trbs = 2;
|
|
/*
|
|
* Don't need to check if we need additional event data and normal TRBs,
|
|
* since data in control transfers will never get bigger than 16MB
|
|
* XXX: can we get a buffer that crosses 64KB boundaries?
|
|
*/
|
|
if (urb->transfer_buffer_length > 0)
|
|
num_trbs++;
|
|
ret = prepare_transfer(xhci, xhci->devs[slot_id],
|
|
ep_index, urb->stream_id,
|
|
num_trbs, urb, 0, mem_flags);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
urb_priv = urb->hcpriv;
|
|
td = &urb_priv->td[0];
|
|
td->num_trbs = num_trbs;
|
|
|
|
/*
|
|
* Don't give the first TRB to the hardware (by toggling the cycle bit)
|
|
* until we've finished creating all the other TRBs. The ring's cycle
|
|
* state may change as we enqueue the other TRBs, so save it too.
|
|
*/
|
|
start_trb = &ep_ring->enqueue->generic;
|
|
start_cycle = ep_ring->cycle_state;
|
|
|
|
/* Queue setup TRB - see section 6.4.1.2.1 */
|
|
/* FIXME better way to translate setup_packet into two u32 fields? */
|
|
setup = (struct usb_ctrlrequest *) urb->setup_packet;
|
|
field = 0;
|
|
field |= TRB_IDT | TRB_TYPE(TRB_SETUP);
|
|
if (start_cycle == 0)
|
|
field |= 0x1;
|
|
|
|
/* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */
|
|
if ((xhci->hci_version >= 0x100) || (xhci->quirks & XHCI_MTK_HOST)) {
|
|
if (urb->transfer_buffer_length > 0) {
|
|
if (setup->bRequestType & USB_DIR_IN)
|
|
field |= TRB_TX_TYPE(TRB_DATA_IN);
|
|
else
|
|
field |= TRB_TX_TYPE(TRB_DATA_OUT);
|
|
}
|
|
}
|
|
|
|
queue_trb(xhci, ep_ring, true,
|
|
setup->bRequestType | setup->bRequest << 8 | le16_to_cpu(setup->wValue) << 16,
|
|
le16_to_cpu(setup->wIndex) | le16_to_cpu(setup->wLength) << 16,
|
|
TRB_LEN(8) | TRB_INTR_TARGET(0),
|
|
/* Immediate data in pointer */
|
|
field);
|
|
|
|
/* If there's data, queue data TRBs */
|
|
/* Only set interrupt on short packet for IN endpoints */
|
|
if (usb_urb_dir_in(urb))
|
|
field = TRB_ISP | TRB_TYPE(TRB_DATA);
|
|
else
|
|
field = TRB_TYPE(TRB_DATA);
|
|
|
|
if (urb->transfer_buffer_length > 0) {
|
|
u32 length_field, remainder;
|
|
u64 addr;
|
|
|
|
if (xhci_urb_suitable_for_idt(urb)) {
|
|
memcpy(&addr, urb->transfer_buffer,
|
|
urb->transfer_buffer_length);
|
|
le64_to_cpus(&addr);
|
|
field |= TRB_IDT;
|
|
} else {
|
|
addr = (u64) urb->transfer_dma;
|
|
}
|
|
|
|
remainder = xhci_td_remainder(xhci, 0,
|
|
urb->transfer_buffer_length,
|
|
urb->transfer_buffer_length,
|
|
urb, 1);
|
|
length_field = TRB_LEN(urb->transfer_buffer_length) |
|
|
TRB_TD_SIZE(remainder) |
|
|
TRB_INTR_TARGET(0);
|
|
if (setup->bRequestType & USB_DIR_IN)
|
|
field |= TRB_DIR_IN;
|
|
queue_trb(xhci, ep_ring, true,
|
|
lower_32_bits(addr),
|
|
upper_32_bits(addr),
|
|
length_field,
|
|
field | ep_ring->cycle_state);
|
|
}
|
|
|
|
/* Save the DMA address of the last TRB in the TD */
|
|
td->last_trb = ep_ring->enqueue;
|
|
td->last_trb_seg = ep_ring->enq_seg;
|
|
|
|
/* Queue status TRB - see Table 7 and sections 4.11.2.2 and 6.4.1.2.3 */
|
|
/* If the device sent data, the status stage is an OUT transfer */
|
|
if (urb->transfer_buffer_length > 0 && setup->bRequestType & USB_DIR_IN)
|
|
field = 0;
|
|
else
|
|
field = TRB_DIR_IN;
|
|
queue_trb(xhci, ep_ring, false,
|
|
0,
|
|
0,
|
|
TRB_INTR_TARGET(0),
|
|
/* Event on completion */
|
|
field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state);
|
|
|
|
giveback_first_trb(xhci, slot_id, ep_index, 0,
|
|
start_cycle, start_trb);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* The transfer burst count field of the isochronous TRB defines the number of
|
|
* bursts that are required to move all packets in this TD. Only SuperSpeed
|
|
* devices can burst up to bMaxBurst number of packets per service interval.
|
|
* This field is zero based, meaning a value of zero in the field means one
|
|
* burst. Basically, for everything but SuperSpeed devices, this field will be
|
|
* zero. Only xHCI 1.0 host controllers support this field.
|
|
*/
|
|
static unsigned int xhci_get_burst_count(struct xhci_hcd *xhci,
|
|
struct urb *urb, unsigned int total_packet_count)
|
|
{
|
|
unsigned int max_burst;
|
|
|
|
if (xhci->hci_version < 0x100 || urb->dev->speed < USB_SPEED_SUPER)
|
|
return 0;
|
|
|
|
max_burst = urb->ep->ss_ep_comp.bMaxBurst;
|
|
return DIV_ROUND_UP(total_packet_count, max_burst + 1) - 1;
|
|
}
|
|
|
|
/*
|
|
* Returns the number of packets in the last "burst" of packets. This field is
|
|
* valid for all speeds of devices. USB 2.0 devices can only do one "burst", so
|
|
* the last burst packet count is equal to the total number of packets in the
|
|
* TD. SuperSpeed endpoints can have up to 3 bursts. All but the last burst
|
|
* must contain (bMaxBurst + 1) number of packets, but the last burst can
|
|
* contain 1 to (bMaxBurst + 1) packets.
|
|
*/
|
|
static unsigned int xhci_get_last_burst_packet_count(struct xhci_hcd *xhci,
|
|
struct urb *urb, unsigned int total_packet_count)
|
|
{
|
|
unsigned int max_burst;
|
|
unsigned int residue;
|
|
|
|
if (xhci->hci_version < 0x100)
|
|
return 0;
|
|
|
|
if (urb->dev->speed >= USB_SPEED_SUPER) {
|
|
/* bMaxBurst is zero based: 0 means 1 packet per burst */
|
|
max_burst = urb->ep->ss_ep_comp.bMaxBurst;
|
|
residue = total_packet_count % (max_burst + 1);
|
|
/* If residue is zero, the last burst contains (max_burst + 1)
|
|
* number of packets, but the TLBPC field is zero-based.
|
|
*/
|
|
if (residue == 0)
|
|
return max_burst;
|
|
return residue - 1;
|
|
}
|
|
if (total_packet_count == 0)
|
|
return 0;
|
|
return total_packet_count - 1;
|
|
}
|
|
|
|
/*
|
|
* Calculates Frame ID field of the isochronous TRB identifies the
|
|
* target frame that the Interval associated with this Isochronous
|
|
* Transfer Descriptor will start on. Refer to 4.11.2.5 in 1.1 spec.
|
|
*
|
|
* Returns actual frame id on success, negative value on error.
|
|
*/
|
|
static int xhci_get_isoc_frame_id(struct xhci_hcd *xhci,
|
|
struct urb *urb, int index)
|
|
{
|
|
int start_frame, ist, ret = 0;
|
|
int start_frame_id, end_frame_id, current_frame_id;
|
|
|
|
if (urb->dev->speed == USB_SPEED_LOW ||
|
|
urb->dev->speed == USB_SPEED_FULL)
|
|
start_frame = urb->start_frame + index * urb->interval;
|
|
else
|
|
start_frame = (urb->start_frame + index * urb->interval) >> 3;
|
|
|
|
/* Isochronous Scheduling Threshold (IST, bits 0~3 in HCSPARAMS2):
|
|
*
|
|
* If bit [3] of IST is cleared to '0', software can add a TRB no
|
|
* later than IST[2:0] Microframes before that TRB is scheduled to
|
|
* be executed.
|
|
* If bit [3] of IST is set to '1', software can add a TRB no later
|
|
* than IST[2:0] Frames before that TRB is scheduled to be executed.
|
|
*/
|
|
ist = HCS_IST(xhci->hcs_params2) & 0x7;
|
|
if (HCS_IST(xhci->hcs_params2) & (1 << 3))
|
|
ist <<= 3;
|
|
|
|
/* Software shall not schedule an Isoch TD with a Frame ID value that
|
|
* is less than the Start Frame ID or greater than the End Frame ID,
|
|
* where:
|
|
*
|
|
* End Frame ID = (Current MFINDEX register value + 895 ms.) MOD 2048
|
|
* Start Frame ID = (Current MFINDEX register value + IST + 1) MOD 2048
|
|
*
|
|
* Both the End Frame ID and Start Frame ID values are calculated
|
|
* in microframes. When software determines the valid Frame ID value;
|
|
* The End Frame ID value should be rounded down to the nearest Frame
|
|
* boundary, and the Start Frame ID value should be rounded up to the
|
|
* nearest Frame boundary.
|
|
*/
|
|
current_frame_id = readl(&xhci->run_regs->microframe_index);
|
|
start_frame_id = roundup(current_frame_id + ist + 1, 8);
|
|
end_frame_id = rounddown(current_frame_id + 895 * 8, 8);
|
|
|
|
start_frame &= 0x7ff;
|
|
start_frame_id = (start_frame_id >> 3) & 0x7ff;
|
|
end_frame_id = (end_frame_id >> 3) & 0x7ff;
|
|
|
|
xhci_dbg(xhci, "%s: index %d, reg 0x%x start_frame_id 0x%x, end_frame_id 0x%x, start_frame 0x%x\n",
|
|
__func__, index, readl(&xhci->run_regs->microframe_index),
|
|
start_frame_id, end_frame_id, start_frame);
|
|
|
|
if (start_frame_id < end_frame_id) {
|
|
if (start_frame > end_frame_id ||
|
|
start_frame < start_frame_id)
|
|
ret = -EINVAL;
|
|
} else if (start_frame_id > end_frame_id) {
|
|
if ((start_frame > end_frame_id &&
|
|
start_frame < start_frame_id))
|
|
ret = -EINVAL;
|
|
} else {
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
if (index == 0) {
|
|
if (ret == -EINVAL || start_frame == start_frame_id) {
|
|
start_frame = start_frame_id + 1;
|
|
if (urb->dev->speed == USB_SPEED_LOW ||
|
|
urb->dev->speed == USB_SPEED_FULL)
|
|
urb->start_frame = start_frame;
|
|
else
|
|
urb->start_frame = start_frame << 3;
|
|
ret = 0;
|
|
}
|
|
}
|
|
|
|
if (ret) {
|
|
xhci_warn(xhci, "Frame ID %d (reg %d, index %d) beyond range (%d, %d)\n",
|
|
start_frame, current_frame_id, index,
|
|
start_frame_id, end_frame_id);
|
|
xhci_warn(xhci, "Ignore frame ID field, use SIA bit instead\n");
|
|
return ret;
|
|
}
|
|
|
|
return start_frame;
|
|
}
|
|
|
|
/* Check if we should generate event interrupt for a TD in an isoc URB */
|
|
static bool trb_block_event_intr(struct xhci_hcd *xhci, int num_tds, int i)
|
|
{
|
|
if (xhci->hci_version < 0x100)
|
|
return false;
|
|
/* always generate an event interrupt for the last TD */
|
|
if (i == num_tds - 1)
|
|
return false;
|
|
/*
|
|
* If AVOID_BEI is set the host handles full event rings poorly,
|
|
* generate an event at least every 8th TD to clear the event ring
|
|
*/
|
|
if (i && xhci->quirks & XHCI_AVOID_BEI)
|
|
return !!(i % xhci->isoc_bei_interval);
|
|
|
|
return true;
|
|
}
|
|
|
|
/* This is for isoc transfer */
|
|
static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|
struct urb *urb, int slot_id, unsigned int ep_index)
|
|
{
|
|
struct xhci_ring *ep_ring;
|
|
struct urb_priv *urb_priv;
|
|
struct xhci_td *td;
|
|
int num_tds, trbs_per_td;
|
|
struct xhci_generic_trb *start_trb;
|
|
bool first_trb;
|
|
int start_cycle;
|
|
u32 field, length_field;
|
|
int running_total, trb_buff_len, td_len, td_remain_len, ret;
|
|
u64 start_addr, addr;
|
|
int i, j;
|
|
bool more_trbs_coming;
|
|
struct xhci_virt_ep *xep;
|
|
int frame_id;
|
|
|
|
xep = &xhci->devs[slot_id]->eps[ep_index];
|
|
ep_ring = xhci->devs[slot_id]->eps[ep_index].ring;
|
|
|
|
num_tds = urb->number_of_packets;
|
|
if (num_tds < 1) {
|
|
xhci_dbg(xhci, "Isoc URB with zero packets?\n");
|
|
return -EINVAL;
|
|
}
|
|
start_addr = (u64) urb->transfer_dma;
|
|
start_trb = &ep_ring->enqueue->generic;
|
|
start_cycle = ep_ring->cycle_state;
|
|
|
|
urb_priv = urb->hcpriv;
|
|
/* Queue the TRBs for each TD, even if they are zero-length */
|
|
for (i = 0; i < num_tds; i++) {
|
|
unsigned int total_pkt_count, max_pkt;
|
|
unsigned int burst_count, last_burst_pkt_count;
|
|
u32 sia_frame_id;
|
|
|
|
first_trb = true;
|
|
running_total = 0;
|
|
addr = start_addr + urb->iso_frame_desc[i].offset;
|
|
td_len = urb->iso_frame_desc[i].length;
|
|
td_remain_len = td_len;
|
|
max_pkt = usb_endpoint_maxp(&urb->ep->desc);
|
|
total_pkt_count = DIV_ROUND_UP(td_len, max_pkt);
|
|
|
|
/* A zero-length transfer still involves at least one packet. */
|
|
if (total_pkt_count == 0)
|
|
total_pkt_count++;
|
|
burst_count = xhci_get_burst_count(xhci, urb, total_pkt_count);
|
|
last_burst_pkt_count = xhci_get_last_burst_packet_count(xhci,
|
|
urb, total_pkt_count);
|
|
|
|
trbs_per_td = count_isoc_trbs_needed(urb, i);
|
|
|
|
ret = prepare_transfer(xhci, xhci->devs[slot_id], ep_index,
|
|
urb->stream_id, trbs_per_td, urb, i, mem_flags);
|
|
if (ret < 0) {
|
|
if (i == 0)
|
|
return ret;
|
|
goto cleanup;
|
|
}
|
|
td = &urb_priv->td[i];
|
|
td->num_trbs = trbs_per_td;
|
|
/* use SIA as default, if frame id is used overwrite it */
|
|
sia_frame_id = TRB_SIA;
|
|
if (!(urb->transfer_flags & URB_ISO_ASAP) &&
|
|
HCC_CFC(xhci->hcc_params)) {
|
|
frame_id = xhci_get_isoc_frame_id(xhci, urb, i);
|
|
if (frame_id >= 0)
|
|
sia_frame_id = TRB_FRAME_ID(frame_id);
|
|
}
|
|
/*
|
|
* Set isoc specific data for the first TRB in a TD.
|
|
* Prevent HW from getting the TRBs by keeping the cycle state
|
|
* inverted in the first TDs isoc TRB.
|
|
*/
|
|
field = TRB_TYPE(TRB_ISOC) |
|
|
TRB_TLBPC(last_burst_pkt_count) |
|
|
sia_frame_id |
|
|
(i ? ep_ring->cycle_state : !start_cycle);
|
|
|
|
/* xhci 1.1 with ETE uses TD_Size field for TBC, old is Rsvdz */
|
|
if (!xep->use_extended_tbc)
|
|
field |= TRB_TBC(burst_count);
|
|
|
|
/* fill the rest of the TRB fields, and remaining normal TRBs */
|
|
for (j = 0; j < trbs_per_td; j++) {
|
|
u32 remainder = 0;
|
|
|
|
/* only first TRB is isoc, overwrite otherwise */
|
|
if (!first_trb)
|
|
field = TRB_TYPE(TRB_NORMAL) |
|
|
ep_ring->cycle_state;
|
|
|
|
/* Only set interrupt on short packet for IN EPs */
|
|
if (usb_urb_dir_in(urb))
|
|
field |= TRB_ISP;
|
|
|
|
/* Set the chain bit for all except the last TRB */
|
|
if (j < trbs_per_td - 1) {
|
|
more_trbs_coming = true;
|
|
field |= TRB_CHAIN;
|
|
} else {
|
|
more_trbs_coming = false;
|
|
td->last_trb = ep_ring->enqueue;
|
|
td->last_trb_seg = ep_ring->enq_seg;
|
|
field |= TRB_IOC;
|
|
if (trb_block_event_intr(xhci, num_tds, i))
|
|
field |= TRB_BEI;
|
|
}
|
|
/* Calculate TRB length */
|
|
trb_buff_len = TRB_BUFF_LEN_UP_TO_BOUNDARY(addr);
|
|
if (trb_buff_len > td_remain_len)
|
|
trb_buff_len = td_remain_len;
|
|
|
|
/* Set the TRB length, TD size, & interrupter fields. */
|
|
remainder = xhci_td_remainder(xhci, running_total,
|
|
trb_buff_len, td_len,
|
|
urb, more_trbs_coming);
|
|
|
|
length_field = TRB_LEN(trb_buff_len) |
|
|
TRB_INTR_TARGET(0);
|
|
|
|
/* xhci 1.1 with ETE uses TD Size field for TBC */
|
|
if (first_trb && xep->use_extended_tbc)
|
|
length_field |= TRB_TD_SIZE_TBC(burst_count);
|
|
else
|
|
length_field |= TRB_TD_SIZE(remainder);
|
|
first_trb = false;
|
|
|
|
queue_trb(xhci, ep_ring, more_trbs_coming,
|
|
lower_32_bits(addr),
|
|
upper_32_bits(addr),
|
|
length_field,
|
|
field);
|
|
running_total += trb_buff_len;
|
|
|
|
addr += trb_buff_len;
|
|
td_remain_len -= trb_buff_len;
|
|
}
|
|
|
|
/* Check TD length */
|
|
if (running_total != td_len) {
|
|
xhci_err(xhci, "ISOC TD length unmatch\n");
|
|
ret = -EINVAL;
|
|
goto cleanup;
|
|
}
|
|
}
|
|
|
|
/* store the next frame id */
|
|
if (HCC_CFC(xhci->hcc_params))
|
|
xep->next_frame_id = urb->start_frame + num_tds * urb->interval;
|
|
|
|
if (xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs == 0) {
|
|
if (xhci->quirks & XHCI_AMD_PLL_FIX)
|
|
usb_amd_quirk_pll_disable();
|
|
}
|
|
xhci_to_hcd(xhci)->self.bandwidth_isoc_reqs++;
|
|
|
|
giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id,
|
|
start_cycle, start_trb);
|
|
return 0;
|
|
cleanup:
|
|
/* Clean up a partially enqueued isoc transfer. */
|
|
|
|
for (i--; i >= 0; i--)
|
|
list_del_init(&urb_priv->td[i].td_list);
|
|
|
|
/* Use the first TD as a temporary variable to turn the TDs we've queued
|
|
* into No-ops with a software-owned cycle bit. That way the hardware
|
|
* won't accidentally start executing bogus TDs when we partially
|
|
* overwrite them. td->first_trb and td->start_seg are already set.
|
|
*/
|
|
urb_priv->td[0].last_trb = ep_ring->enqueue;
|
|
/* Every TRB except the first & last will have its cycle bit flipped. */
|
|
td_to_noop(xhci, ep_ring, &urb_priv->td[0], true);
|
|
|
|
/* Reset the ring enqueue back to the first TRB and its cycle bit. */
|
|
ep_ring->enqueue = urb_priv->td[0].first_trb;
|
|
ep_ring->enq_seg = urb_priv->td[0].start_seg;
|
|
ep_ring->cycle_state = start_cycle;
|
|
ep_ring->num_trbs_free = ep_ring->num_trbs_free_temp;
|
|
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Check transfer ring to guarantee there is enough room for the urb.
|
|
* Update ISO URB start_frame and interval.
|
|
* Update interval as xhci_queue_intr_tx does. Use xhci frame_index to
|
|
* update urb->start_frame if URB_ISO_ASAP is set in transfer_flags or
|
|
* Contiguous Frame ID is not supported by HC.
|
|
*/
|
|
int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
|
|
struct urb *urb, int slot_id, unsigned int ep_index)
|
|
{
|
|
struct xhci_virt_device *xdev;
|
|
struct xhci_ring *ep_ring;
|
|
struct xhci_ep_ctx *ep_ctx;
|
|
int start_frame;
|
|
int num_tds, num_trbs, i;
|
|
int ret;
|
|
struct xhci_virt_ep *xep;
|
|
int ist;
|
|
|
|
xdev = xhci->devs[slot_id];
|
|
xep = &xhci->devs[slot_id]->eps[ep_index];
|
|
ep_ring = xdev->eps[ep_index].ring;
|
|
ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
|
|
|
|
num_trbs = 0;
|
|
num_tds = urb->number_of_packets;
|
|
for (i = 0; i < num_tds; i++)
|
|
num_trbs += count_isoc_trbs_needed(urb, i);
|
|
|
|
/* Check the ring to guarantee there is enough room for the whole urb.
|
|
* Do not insert any td of the urb to the ring if the check failed.
|
|
*/
|
|
ret = prepare_ring(xhci, ep_ring, GET_EP_CTX_STATE(ep_ctx),
|
|
num_trbs, mem_flags);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Check interval value. This should be done before we start to
|
|
* calculate the start frame value.
|
|
*/
|
|
check_interval(xhci, urb, ep_ctx);
|
|
|
|
/* Calculate the start frame and put it in urb->start_frame. */
|
|
if (HCC_CFC(xhci->hcc_params) && !list_empty(&ep_ring->td_list)) {
|
|
if (GET_EP_CTX_STATE(ep_ctx) == EP_STATE_RUNNING) {
|
|
urb->start_frame = xep->next_frame_id;
|
|
goto skip_start_over;
|
|
}
|
|
}
|
|
|
|
start_frame = readl(&xhci->run_regs->microframe_index);
|
|
start_frame &= 0x3fff;
|
|
/*
|
|
* Round up to the next frame and consider the time before trb really
|
|
* gets scheduled by hardare.
|
|
*/
|
|
ist = HCS_IST(xhci->hcs_params2) & 0x7;
|
|
if (HCS_IST(xhci->hcs_params2) & (1 << 3))
|
|
ist <<= 3;
|
|
start_frame += ist + XHCI_CFC_DELAY;
|
|
start_frame = roundup(start_frame, 8);
|
|
|
|
/*
|
|
* Round up to the next ESIT (Endpoint Service Interval Time) if ESIT
|
|
* is greate than 8 microframes.
|
|
*/
|
|
if (urb->dev->speed == USB_SPEED_LOW ||
|
|
urb->dev->speed == USB_SPEED_FULL) {
|
|
start_frame = roundup(start_frame, urb->interval << 3);
|
|
urb->start_frame = start_frame >> 3;
|
|
} else {
|
|
start_frame = roundup(start_frame, urb->interval);
|
|
urb->start_frame = start_frame;
|
|
}
|
|
|
|
skip_start_over:
|
|
ep_ring->num_trbs_free_temp = ep_ring->num_trbs_free;
|
|
|
|
return xhci_queue_isoc_tx(xhci, mem_flags, urb, slot_id, ep_index);
|
|
}
|
|
|
|
/**** Command Ring Operations ****/
|
|
|
|
/* Generic function for queueing a command TRB on the command ring.
|
|
* Check to make sure there's room on the command ring for one command TRB.
|
|
* Also check that there's room reserved for commands that must not fail.
|
|
* If this is a command that must not fail, meaning command_must_succeed = TRUE,
|
|
* then only check for the number of reserved spots.
|
|
* Don't decrement xhci->cmd_ring_reserved_trbs after we've queued the TRB
|
|
* because the command event handler may want to resubmit a failed command.
|
|
*/
|
|
static int queue_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
u32 field1, u32 field2,
|
|
u32 field3, u32 field4, bool command_must_succeed)
|
|
{
|
|
int reserved_trbs = xhci->cmd_ring_reserved_trbs;
|
|
int ret;
|
|
|
|
if ((xhci->xhc_state & XHCI_STATE_DYING) ||
|
|
(xhci->xhc_state & XHCI_STATE_HALTED)) {
|
|
xhci_dbg(xhci, "xHCI dying or halted, can't queue_command\n");
|
|
return -ESHUTDOWN;
|
|
}
|
|
|
|
if (!command_must_succeed)
|
|
reserved_trbs++;
|
|
|
|
ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING,
|
|
reserved_trbs, GFP_ATOMIC);
|
|
if (ret < 0) {
|
|
xhci_err(xhci, "ERR: No room for command on command ring\n");
|
|
if (command_must_succeed)
|
|
xhci_err(xhci, "ERR: Reserved TRB counting for "
|
|
"unfailable commands failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
cmd->command_trb = xhci->cmd_ring->enqueue;
|
|
|
|
/* if there are no other commands queued we start the timeout timer */
|
|
if (list_empty(&xhci->cmd_list)) {
|
|
xhci->current_cmd = cmd;
|
|
xhci_mod_cmd_timer(xhci, XHCI_CMD_DEFAULT_TIMEOUT);
|
|
}
|
|
|
|
list_add_tail(&cmd->cmd_list, &xhci->cmd_list);
|
|
|
|
queue_trb(xhci, xhci->cmd_ring, false, field1, field2, field3,
|
|
field4 | xhci->cmd_ring->cycle_state);
|
|
return 0;
|
|
}
|
|
|
|
/* Queue a slot enable or disable request on the command ring */
|
|
int xhci_queue_slot_control(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
u32 trb_type, u32 slot_id)
|
|
{
|
|
return queue_command(xhci, cmd, 0, 0, 0,
|
|
TRB_TYPE(trb_type) | SLOT_ID_FOR_TRB(slot_id), false);
|
|
}
|
|
|
|
/* Queue an address device command TRB */
|
|
int xhci_queue_address_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
dma_addr_t in_ctx_ptr, u32 slot_id, enum xhci_setup_dev setup)
|
|
{
|
|
return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
|
|
upper_32_bits(in_ctx_ptr), 0,
|
|
TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id)
|
|
| (setup == SETUP_CONTEXT_ONLY ? TRB_BSR : 0), false);
|
|
}
|
|
|
|
int xhci_queue_vendor_command(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
u32 field1, u32 field2, u32 field3, u32 field4)
|
|
{
|
|
return queue_command(xhci, cmd, field1, field2, field3, field4, false);
|
|
}
|
|
|
|
/* Queue a reset device command TRB */
|
|
int xhci_queue_reset_device(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
u32 slot_id)
|
|
{
|
|
return queue_command(xhci, cmd, 0, 0, 0,
|
|
TRB_TYPE(TRB_RESET_DEV) | SLOT_ID_FOR_TRB(slot_id),
|
|
false);
|
|
}
|
|
|
|
/* Queue a configure endpoint command TRB */
|
|
int xhci_queue_configure_endpoint(struct xhci_hcd *xhci,
|
|
struct xhci_command *cmd, dma_addr_t in_ctx_ptr,
|
|
u32 slot_id, bool command_must_succeed)
|
|
{
|
|
return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
|
|
upper_32_bits(in_ctx_ptr), 0,
|
|
TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id),
|
|
command_must_succeed);
|
|
}
|
|
|
|
/* Queue an evaluate context command TRB */
|
|
int xhci_queue_evaluate_context(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
dma_addr_t in_ctx_ptr, u32 slot_id, bool command_must_succeed)
|
|
{
|
|
return queue_command(xhci, cmd, lower_32_bits(in_ctx_ptr),
|
|
upper_32_bits(in_ctx_ptr), 0,
|
|
TRB_TYPE(TRB_EVAL_CONTEXT) | SLOT_ID_FOR_TRB(slot_id),
|
|
command_must_succeed);
|
|
}
|
|
|
|
/*
|
|
* Suspend is set to indicate "Stop Endpoint Command" is being issued to stop
|
|
* activity on an endpoint that is about to be suspended.
|
|
*/
|
|
int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
int slot_id, unsigned int ep_index, int suspend)
|
|
{
|
|
u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
|
|
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
|
|
u32 type = TRB_TYPE(TRB_STOP_RING);
|
|
u32 trb_suspend = SUSPEND_PORT_FOR_TRB(suspend);
|
|
|
|
return queue_command(xhci, cmd, 0, 0, 0,
|
|
trb_slot_id | trb_ep_index | type | trb_suspend, false);
|
|
}
|
|
|
|
int xhci_queue_reset_ep(struct xhci_hcd *xhci, struct xhci_command *cmd,
|
|
int slot_id, unsigned int ep_index,
|
|
enum xhci_ep_reset_type reset_type)
|
|
{
|
|
u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
|
|
u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
|
|
u32 type = TRB_TYPE(TRB_RESET_EP);
|
|
|
|
if (reset_type == EP_SOFT_RESET)
|
|
type |= TRB_TSP;
|
|
|
|
return queue_command(xhci, cmd, 0, 0, 0,
|
|
trb_slot_id | trb_ep_index | type, false);
|
|
}
|