514 lines
13 KiB
C
514 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* R-Car Gen3 THS thermal sensor driver
|
|
* Based on rcar_thermal.c and work from Hien Dang and Khiem Nguyen.
|
|
*
|
|
* Copyright (C) 2016 Renesas Electronics Corporation.
|
|
* Copyright (C) 2016 Sang Engineering
|
|
*/
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/sys_soc.h>
|
|
#include <linux/thermal.h>
|
|
|
|
#include "thermal_core.h"
|
|
#include "thermal_hwmon.h"
|
|
|
|
/* Register offsets */
|
|
#define REG_GEN3_IRQSTR 0x04
|
|
#define REG_GEN3_IRQMSK 0x08
|
|
#define REG_GEN3_IRQCTL 0x0C
|
|
#define REG_GEN3_IRQEN 0x10
|
|
#define REG_GEN3_IRQTEMP1 0x14
|
|
#define REG_GEN3_IRQTEMP2 0x18
|
|
#define REG_GEN3_IRQTEMP3 0x1C
|
|
#define REG_GEN3_CTSR 0x20
|
|
#define REG_GEN3_THCTR 0x20
|
|
#define REG_GEN3_TEMP 0x28
|
|
#define REG_GEN3_THCODE1 0x50
|
|
#define REG_GEN3_THCODE2 0x54
|
|
#define REG_GEN3_THCODE3 0x58
|
|
|
|
/* IRQ{STR,MSK,EN} bits */
|
|
#define IRQ_TEMP1 BIT(0)
|
|
#define IRQ_TEMP2 BIT(1)
|
|
#define IRQ_TEMP3 BIT(2)
|
|
#define IRQ_TEMPD1 BIT(3)
|
|
#define IRQ_TEMPD2 BIT(4)
|
|
#define IRQ_TEMPD3 BIT(5)
|
|
|
|
/* CTSR bits */
|
|
#define CTSR_PONM BIT(8)
|
|
#define CTSR_AOUT BIT(7)
|
|
#define CTSR_THBGR BIT(5)
|
|
#define CTSR_VMEN BIT(4)
|
|
#define CTSR_VMST BIT(1)
|
|
#define CTSR_THSST BIT(0)
|
|
|
|
/* THCTR bits */
|
|
#define THCTR_PONM BIT(6)
|
|
#define THCTR_THSST BIT(0)
|
|
|
|
#define CTEMP_MASK 0xFFF
|
|
|
|
#define MCELSIUS(temp) ((temp) * 1000)
|
|
#define GEN3_FUSE_MASK 0xFFF
|
|
|
|
#define TSC_MAX_NUM 3
|
|
|
|
/* Structure for thermal temperature calculation */
|
|
struct equation_coefs {
|
|
int a1;
|
|
int b1;
|
|
int a2;
|
|
int b2;
|
|
};
|
|
|
|
struct rcar_gen3_thermal_tsc {
|
|
void __iomem *base;
|
|
struct thermal_zone_device *zone;
|
|
struct equation_coefs coef;
|
|
int low;
|
|
int high;
|
|
};
|
|
|
|
struct rcar_gen3_thermal_priv {
|
|
struct rcar_gen3_thermal_tsc *tscs[TSC_MAX_NUM];
|
|
unsigned int num_tscs;
|
|
spinlock_t lock; /* Protect interrupts on and off */
|
|
void (*thermal_init)(struct rcar_gen3_thermal_tsc *tsc);
|
|
};
|
|
|
|
static inline u32 rcar_gen3_thermal_read(struct rcar_gen3_thermal_tsc *tsc,
|
|
u32 reg)
|
|
{
|
|
return ioread32(tsc->base + reg);
|
|
}
|
|
|
|
static inline void rcar_gen3_thermal_write(struct rcar_gen3_thermal_tsc *tsc,
|
|
u32 reg, u32 data)
|
|
{
|
|
iowrite32(data, tsc->base + reg);
|
|
}
|
|
|
|
/*
|
|
* Linear approximation for temperature
|
|
*
|
|
* [reg] = [temp] * a + b => [temp] = ([reg] - b) / a
|
|
*
|
|
* The constants a and b are calculated using two triplets of int values PTAT
|
|
* and THCODE. PTAT and THCODE can either be read from hardware or use hard
|
|
* coded values from driver. The formula to calculate a and b are taken from
|
|
* BSP and sparsely documented and understood.
|
|
*
|
|
* Examining the linear formula and the formula used to calculate constants a
|
|
* and b while knowing that the span for PTAT and THCODE values are between
|
|
* 0x000 and 0xfff the largest integer possible is 0xfff * 0xfff == 0xffe001.
|
|
* Integer also needs to be signed so that leaves 7 bits for binary
|
|
* fixed point scaling.
|
|
*/
|
|
|
|
#define FIXPT_SHIFT 7
|
|
#define FIXPT_INT(_x) ((_x) << FIXPT_SHIFT)
|
|
#define INT_FIXPT(_x) ((_x) >> FIXPT_SHIFT)
|
|
#define FIXPT_DIV(_a, _b) DIV_ROUND_CLOSEST(((_a) << FIXPT_SHIFT), (_b))
|
|
#define FIXPT_TO_MCELSIUS(_x) ((_x) * 1000 >> FIXPT_SHIFT)
|
|
|
|
#define RCAR3_THERMAL_GRAN 500 /* mili Celsius */
|
|
|
|
/* no idea where these constants come from */
|
|
#define TJ_1 116
|
|
#define TJ_3 -41
|
|
|
|
static void rcar_gen3_thermal_calc_coefs(struct equation_coefs *coef,
|
|
int *ptat, int *thcode)
|
|
{
|
|
int tj_2;
|
|
|
|
/* TODO: Find documentation and document constant calculation formula */
|
|
|
|
/*
|
|
* Division is not scaled in BSP and if scaled it might overflow
|
|
* the dividend (4095 * 4095 << 14 > INT_MAX) so keep it unscaled
|
|
*/
|
|
tj_2 = (FIXPT_INT((ptat[1] - ptat[2]) * 157)
|
|
/ (ptat[0] - ptat[2])) - FIXPT_INT(41);
|
|
|
|
coef->a1 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[2]),
|
|
tj_2 - FIXPT_INT(TJ_3));
|
|
coef->b1 = FIXPT_INT(thcode[2]) - coef->a1 * TJ_3;
|
|
|
|
coef->a2 = FIXPT_DIV(FIXPT_INT(thcode[1] - thcode[0]),
|
|
tj_2 - FIXPT_INT(TJ_1));
|
|
coef->b2 = FIXPT_INT(thcode[0]) - coef->a2 * TJ_1;
|
|
}
|
|
|
|
static int rcar_gen3_thermal_round(int temp)
|
|
{
|
|
int result, round_offs;
|
|
|
|
round_offs = temp >= 0 ? RCAR3_THERMAL_GRAN / 2 :
|
|
-RCAR3_THERMAL_GRAN / 2;
|
|
result = (temp + round_offs) / RCAR3_THERMAL_GRAN;
|
|
return result * RCAR3_THERMAL_GRAN;
|
|
}
|
|
|
|
static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
|
|
{
|
|
struct rcar_gen3_thermal_tsc *tsc = devdata;
|
|
int mcelsius, val1, val2;
|
|
u32 reg;
|
|
|
|
/* Read register and convert to mili Celsius */
|
|
reg = rcar_gen3_thermal_read(tsc, REG_GEN3_TEMP) & CTEMP_MASK;
|
|
|
|
val1 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b1, tsc->coef.a1);
|
|
val2 = FIXPT_DIV(FIXPT_INT(reg) - tsc->coef.b2, tsc->coef.a2);
|
|
mcelsius = FIXPT_TO_MCELSIUS((val1 + val2) / 2);
|
|
|
|
/* Make sure we are inside specifications */
|
|
if ((mcelsius < MCELSIUS(-40)) || (mcelsius > MCELSIUS(125)))
|
|
return -EIO;
|
|
|
|
/* Round value to device granularity setting */
|
|
*temp = rcar_gen3_thermal_round(mcelsius);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc,
|
|
int mcelsius)
|
|
{
|
|
int celsius, val1, val2;
|
|
|
|
celsius = DIV_ROUND_CLOSEST(mcelsius, 1000);
|
|
val1 = celsius * tsc->coef.a1 + tsc->coef.b1;
|
|
val2 = celsius * tsc->coef.a2 + tsc->coef.b2;
|
|
|
|
return INT_FIXPT((val1 + val2) / 2);
|
|
}
|
|
|
|
static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high)
|
|
{
|
|
struct rcar_gen3_thermal_tsc *tsc = devdata;
|
|
|
|
low = clamp_val(low, -40000, 120000);
|
|
high = clamp_val(high, -40000, 120000);
|
|
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
|
|
rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
|
|
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2,
|
|
rcar_gen3_thermal_mcelsius_to_temp(tsc, high));
|
|
|
|
tsc->low = low;
|
|
tsc->high = high;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = {
|
|
.get_temp = rcar_gen3_thermal_get_temp,
|
|
.set_trips = rcar_gen3_thermal_set_trips,
|
|
};
|
|
|
|
static void rcar_thermal_irq_set(struct rcar_gen3_thermal_priv *priv, bool on)
|
|
{
|
|
unsigned int i;
|
|
u32 val = on ? IRQ_TEMPD1 | IRQ_TEMP2 : 0;
|
|
|
|
for (i = 0; i < priv->num_tscs; i++)
|
|
rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQMSK, val);
|
|
}
|
|
|
|
static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
|
|
{
|
|
struct rcar_gen3_thermal_priv *priv = data;
|
|
u32 status;
|
|
int i, ret = IRQ_HANDLED;
|
|
|
|
spin_lock(&priv->lock);
|
|
for (i = 0; i < priv->num_tscs; i++) {
|
|
status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
|
|
rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
|
|
if (status)
|
|
ret = IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
if (ret == IRQ_WAKE_THREAD)
|
|
rcar_thermal_irq_set(priv, false);
|
|
|
|
spin_unlock(&priv->lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t rcar_gen3_thermal_irq_thread(int irq, void *data)
|
|
{
|
|
struct rcar_gen3_thermal_priv *priv = data;
|
|
unsigned long flags;
|
|
int i;
|
|
|
|
for (i = 0; i < priv->num_tscs; i++)
|
|
thermal_zone_device_update(priv->tscs[i]->zone,
|
|
THERMAL_EVENT_UNSPECIFIED);
|
|
|
|
spin_lock_irqsave(&priv->lock, flags);
|
|
rcar_thermal_irq_set(priv, true);
|
|
spin_unlock_irqrestore(&priv->lock, flags);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct soc_device_attribute r8a7795es1[] = {
|
|
{ .soc_id = "r8a7795", .revision = "ES1.*" },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
|
|
{
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_THBGR);
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, 0x0);
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR, CTSR_PONM);
|
|
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F);
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2);
|
|
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,
|
|
CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN);
|
|
|
|
usleep_range(100, 200);
|
|
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,
|
|
CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN |
|
|
CTSR_VMST | CTSR_THSST);
|
|
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
|
|
{
|
|
u32 reg_val;
|
|
|
|
reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
|
|
reg_val &= ~THCTR_PONM;
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
|
|
|
|
usleep_range(1000, 2000);
|
|
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F);
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN, IRQ_TEMPD1 | IRQ_TEMP2);
|
|
|
|
reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
|
|
reg_val |= THCTR_THSST;
|
|
rcar_gen3_thermal_write(tsc, REG_GEN3_THCTR, reg_val);
|
|
|
|
usleep_range(1000, 2000);
|
|
}
|
|
|
|
static const struct of_device_id rcar_gen3_thermal_dt_ids[] = {
|
|
{ .compatible = "renesas,r8a774a1-thermal", },
|
|
{ .compatible = "renesas,r8a7795-thermal", },
|
|
{ .compatible = "renesas,r8a7796-thermal", },
|
|
{ .compatible = "renesas,r8a77965-thermal", },
|
|
{ .compatible = "renesas,r8a77980-thermal", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rcar_gen3_thermal_dt_ids);
|
|
|
|
static int rcar_gen3_thermal_remove(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
|
|
pm_runtime_put(dev);
|
|
pm_runtime_disable(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void rcar_gen3_hwmon_action(void *data)
|
|
{
|
|
struct thermal_zone_device *zone = data;
|
|
|
|
thermal_remove_hwmon_sysfs(zone);
|
|
}
|
|
|
|
static int rcar_gen3_thermal_probe(struct platform_device *pdev)
|
|
{
|
|
struct rcar_gen3_thermal_priv *priv;
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct thermal_zone_device *zone;
|
|
int ret, irq, i;
|
|
char *irqname;
|
|
|
|
/* default values if FUSEs are missing */
|
|
/* TODO: Read values from hardware on supported platforms */
|
|
int ptat[3] = { 2631, 1509, 435 };
|
|
int thcode[TSC_MAX_NUM][3] = {
|
|
{ 3397, 2800, 2221 },
|
|
{ 3393, 2795, 2216 },
|
|
{ 3389, 2805, 2237 },
|
|
};
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->thermal_init = rcar_gen3_thermal_init;
|
|
if (soc_device_match(r8a7795es1))
|
|
priv->thermal_init = rcar_gen3_thermal_init_r8a7795es1;
|
|
|
|
spin_lock_init(&priv->lock);
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
/*
|
|
* Request 2 (of the 3 possible) IRQs, the driver only needs to
|
|
* to trigger on the low and high trip points of the current
|
|
* temp window at this point.
|
|
*/
|
|
for (i = 0; i < 2; i++) {
|
|
irq = platform_get_irq(pdev, i);
|
|
if (irq < 0)
|
|
return irq;
|
|
|
|
irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d",
|
|
dev_name(dev), i);
|
|
if (!irqname)
|
|
return -ENOMEM;
|
|
|
|
ret = devm_request_threaded_irq(dev, irq, rcar_gen3_thermal_irq,
|
|
rcar_gen3_thermal_irq_thread,
|
|
IRQF_SHARED, irqname, priv);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
pm_runtime_enable(dev);
|
|
pm_runtime_get_sync(dev);
|
|
|
|
for (i = 0; i < TSC_MAX_NUM; i++) {
|
|
struct rcar_gen3_thermal_tsc *tsc;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, i);
|
|
if (!res)
|
|
break;
|
|
|
|
tsc = devm_kzalloc(dev, sizeof(*tsc), GFP_KERNEL);
|
|
if (!tsc) {
|
|
ret = -ENOMEM;
|
|
goto error_unregister;
|
|
}
|
|
|
|
tsc->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(tsc->base)) {
|
|
ret = PTR_ERR(tsc->base);
|
|
goto error_unregister;
|
|
}
|
|
|
|
priv->tscs[i] = tsc;
|
|
|
|
priv->thermal_init(tsc);
|
|
rcar_gen3_thermal_calc_coefs(&tsc->coef, ptat, thcode[i]);
|
|
|
|
zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
|
|
&rcar_gen3_tz_of_ops);
|
|
if (IS_ERR(zone)) {
|
|
dev_err(dev, "Can't register thermal zone\n");
|
|
ret = PTR_ERR(zone);
|
|
goto error_unregister;
|
|
}
|
|
tsc->zone = zone;
|
|
|
|
ret = of_thermal_get_ntrips(tsc->zone);
|
|
if (ret < 0)
|
|
goto error_unregister;
|
|
|
|
tsc->zone->tzp->no_hwmon = false;
|
|
ret = thermal_add_hwmon_sysfs(tsc->zone);
|
|
if (ret)
|
|
goto error_unregister;
|
|
|
|
ret = devm_add_action(dev, rcar_gen3_hwmon_action, zone);
|
|
if (ret) {
|
|
rcar_gen3_hwmon_action(zone);
|
|
goto error_unregister;
|
|
}
|
|
|
|
dev_info(dev, "TSC%d: Loaded %d trip points\n", i, ret);
|
|
}
|
|
|
|
priv->num_tscs = i;
|
|
|
|
if (!priv->num_tscs) {
|
|
ret = -ENODEV;
|
|
goto error_unregister;
|
|
}
|
|
|
|
rcar_thermal_irq_set(priv, true);
|
|
|
|
return 0;
|
|
|
|
error_unregister:
|
|
rcar_gen3_thermal_remove(pdev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused rcar_gen3_thermal_suspend(struct device *dev)
|
|
{
|
|
struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
|
|
|
|
rcar_thermal_irq_set(priv, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
|
|
{
|
|
struct rcar_gen3_thermal_priv *priv = dev_get_drvdata(dev);
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < priv->num_tscs; i++) {
|
|
struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
|
|
|
|
priv->thermal_init(tsc);
|
|
rcar_gen3_thermal_set_trips(tsc, tsc->low, tsc->high);
|
|
}
|
|
|
|
rcar_thermal_irq_set(priv, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(rcar_gen3_thermal_pm_ops, rcar_gen3_thermal_suspend,
|
|
rcar_gen3_thermal_resume);
|
|
|
|
static struct platform_driver rcar_gen3_thermal_driver = {
|
|
.driver = {
|
|
.name = "rcar_gen3_thermal",
|
|
.pm = &rcar_gen3_thermal_pm_ops,
|
|
.of_match_table = rcar_gen3_thermal_dt_ids,
|
|
},
|
|
.probe = rcar_gen3_thermal_probe,
|
|
.remove = rcar_gen3_thermal_remove,
|
|
};
|
|
module_platform_driver(rcar_gen3_thermal_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("R-Car Gen3 THS thermal sensor driver");
|
|
MODULE_AUTHOR("Wolfram Sang <wsa+renesas@sang-engineering.com>");
|