OpenCloudOS-Kernel/drivers/ata
Martin Hicks 29200f12a1 sata-fsl: Apply link speed limits
The driver was ignoring limits requested by libata.force.  The output
would look like:

fsl-sata ffe18000.sata: Sata FSL Platform/CSB Driver init
ata1: FORCE: PHY spd limit set to 1.5Gbps
ata1: SATA max UDMA/133 irq 74
ata1: Signature Update detected @ 0 msecs
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 310)

Signed-off-by: Martin Hicks <mort@bork.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
2015-03-02 12:08:43 -05:00
..
Kconfig sata_dwc_460ex: disable COMPILE_TEST again 2015-02-10 18:24:57 -08:00
Makefile ata: Add support for the Tegra124 SATA controller 2014-07-18 17:52:33 -04:00
acard-ahci.c AHCI: Move host activation code into ahci_host_activate() 2014-10-06 11:43:35 -04:00
ahci.c ahci: Remove Device ID for Intel Sunrise Point PCH 2015-01-13 10:32:29 -05:00
ahci.h ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_da850.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_imx.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_mvebu.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_platform.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_st.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_sunxi.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_tegra.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_xgene.c Merge branch 'for-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata into for-3.20 2015-02-09 07:54:41 -05:00
ata_generic.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
ata_piix.c ata_piix: Add Device IDs for Intel 9 Series PCH 2014-08-28 08:53:40 -04:00
libahci.c ahci: Use dev_info() to inform about the lack of Device Sleep support 2015-01-09 17:04:12 -05:00
libahci_platform.c ata: libahci: Use of_platform_device_create only if supported 2015-02-03 07:12:54 -05:00
libata-acpi.c ACPI and power management updates for 3.15-rc1 2014-04-01 12:48:54 -07:00
libata-core.c Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-block 2015-02-12 14:30:53 -08:00
libata-eh.c SCSI misc on 20150209 2015-02-11 10:28:45 -08:00
libata-pmp.c ata: enable quirk from jmicron JMB350 for JMB394 2014-01-31 07:05:44 -05:00
libata-scsi.c Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-block 2015-02-12 14:30:53 -08:00
libata-sff.c libata: prevent HSM state change race between ISR and PIO 2015-01-19 14:11:23 -05:00
libata-transport.c libata: Implement ATA_DEV_ZAC 2014-11-05 11:22:06 -05:00
libata-transport.h [libata] Add ATA transport class 2010-10-21 20:21:03 -04:00
libata-zpodd.c libata: zpodd: eliminate odd_can_poweroff 2014-03-14 11:23:47 -04:00
libata.h Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-block 2015-02-12 14:30:53 -08:00
pata_acpi.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ali.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_amd.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_arasan_cf.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_artop.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_at32.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_at91.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_atiixp.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_atp867x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_bf54x.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_cmd64x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd640.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5520.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5530.c ata: Delete unnecessary checks before the function call "pci_dev_put" 2015-02-03 07:04:44 -05:00
pata_cs5535.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5536.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cypress.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_efar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ep93xx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_hpt3x2n.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt3x3.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_hpt37x.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt366.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_icside.c Drivers: ata: remove __dev* attributes. 2013-01-03 15:57:03 -08:00
pata_imx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_isapnp.c pata_isapnp: Don't use invalid I/O ports 2013-10-07 15:17:32 -04:00
pata_it821x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_it8213.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_jmicron.c ata: Disabling the async PM for JMicron chip 363/361 2014-09-01 08:38:06 -04:00
pata_legacy.c pata_legacy: Remove dead code 2014-03-11 08:30:53 -04:00
pata_macio.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_marvell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_mpc52xx.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_mpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_netcell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ninja32.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87410.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87415.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_octeon_cf.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_of_platform.c ata: pata_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
pata_oldpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_opti.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_optidma.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_palmld.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_pcmcia.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_pdc202xx_old.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_pdc2027x.c pata_pdc2027x: Use 64-bit timekeeping 2015-01-27 11:06:19 -05:00
pata_piccolo.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_platform.c ata: pata_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
pata_pxa.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_radisys.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rb532_cf.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_rdc.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rz1000.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_samsung_cf.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_sc1200.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_scc.c pata_scc: propagate return value of scc_wait_after_reset 2014-08-18 09:15:21 -04:00
pata_sch.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_serverworks.c pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller 2014-10-07 17:10:14 -04:00
pata_sil680.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sl82c105.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_triflex.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pdc_adma.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_dwc_460ex.c sata_dwc_460ex: convert to devm_kzalloc in ->probe() 2015-01-08 08:30:48 -05:00
sata_fsl.c sata-fsl: Apply link speed limits 2015-03-02 12:08:43 -05:00
sata_highbank.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
sata_inic162x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_mv.c sata_mv: Delete unnecessary checks before the function call "phy_power_off" 2015-02-03 07:05:04 -05:00
sata_nv.c scsi: drop reason argument from ->change_queue_depth 2014-11-24 14:45:27 +01:00
sata_promise.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_promise.h libata annotations and fixes 2008-01-23 05:24:15 -05:00
sata_qstor.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_rcar.c sata_rcar: extend PM methods 2015-01-19 09:04:37 -05:00
sata_sil.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_sil24.c Merge branch 'for-3.20/drivers' of git://git.kernel.dk/linux-block 2015-02-12 14:30:53 -08:00
sata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_svw.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_sx4.c ata: remove superfluous casts 2014-03-26 12:36:53 -04:00
sata_uli.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
sata_vsc.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
sis.h