543 lines
16 KiB
Plaintext
543 lines
16 KiB
Plaintext
#
|
|
# SPI driver configuration
|
|
#
|
|
# NOTE: the reason this doesn't show SPI slave support is mostly that
|
|
# nobody's needed a slave side API yet. The master-role API is not
|
|
# fully appropriate there, so it'd need some thought to do well.
|
|
#
|
|
menuconfig SPI
|
|
bool "SPI support"
|
|
depends on HAS_IOMEM
|
|
help
|
|
The "Serial Peripheral Interface" is a low level synchronous
|
|
protocol. Chips that support SPI can have data transfer rates
|
|
up to several tens of Mbit/sec. Chips are addressed with a
|
|
controller and a chipselect. Most SPI slaves don't support
|
|
dynamic device discovery; some are even write-only or read-only.
|
|
|
|
SPI is widely used by microcontrollers to talk with sensors,
|
|
eeprom and flash memory, codecs and various other controller
|
|
chips, analog to digital (and d-to-a) converters, and more.
|
|
MMC and SD cards can be accessed using SPI protocol; and for
|
|
DataFlash cards used in MMC sockets, SPI must always be used.
|
|
|
|
SPI is one of a family of similar protocols using a four wire
|
|
interface (select, clock, data in, data out) including Microwire
|
|
(half duplex), SSP, SSI, and PSP. This driver framework should
|
|
work with most such devices and controllers.
|
|
|
|
if SPI
|
|
|
|
config SPI_DEBUG
|
|
boolean "Debug support for SPI drivers"
|
|
depends on DEBUG_KERNEL
|
|
help
|
|
Say "yes" to enable debug messaging (like dev_dbg and pr_debug),
|
|
sysfs, and debugfs support in SPI controller and protocol drivers.
|
|
|
|
#
|
|
# MASTER side ... talking to discrete SPI slave chips including microcontrollers
|
|
#
|
|
|
|
config SPI_MASTER
|
|
# boolean "SPI Master Support"
|
|
boolean
|
|
default SPI
|
|
help
|
|
If your system has an master-capable SPI controller (which
|
|
provides the clock and chipselect), you can enable that
|
|
controller and the protocol drivers for the SPI slave chips
|
|
that are connected.
|
|
|
|
if SPI_MASTER
|
|
|
|
comment "SPI Master Controller Drivers"
|
|
|
|
config SPI_ALTERA
|
|
tristate "Altera SPI Controller"
|
|
depends on GENERIC_HARDIRQS
|
|
select SPI_BITBANG
|
|
help
|
|
This is the driver for the Altera SPI Controller.
|
|
|
|
config SPI_ATH79
|
|
tristate "Atheros AR71XX/AR724X/AR913X SPI controller driver"
|
|
depends on ATH79 && GPIOLIB
|
|
select SPI_BITBANG
|
|
help
|
|
This enables support for the SPI controller present on the
|
|
Atheros AR71XX/AR724X/AR913X SoCs.
|
|
|
|
config SPI_ATMEL
|
|
tristate "Atmel SPI Controller"
|
|
depends on (ARCH_AT91 || AVR32)
|
|
help
|
|
This selects a driver for the Atmel SPI Controller, present on
|
|
many AT32 (AVR32) and AT91 (ARM) chips.
|
|
|
|
config SPI_BCM2835
|
|
tristate "BCM2835 SPI controller"
|
|
depends on ARCH_BCM2835
|
|
help
|
|
This selects a driver for the Broadcom BCM2835 SPI master.
|
|
|
|
The BCM2835 contains two types of SPI master controller; the
|
|
"universal SPI master", and the regular SPI controller. This driver
|
|
is for the regular SPI controller. Slave mode operation is not also
|
|
not supported.
|
|
|
|
config SPI_BFIN5XX
|
|
tristate "SPI controller driver for ADI Blackfin5xx"
|
|
depends on BLACKFIN
|
|
help
|
|
This is the SPI controller master driver for Blackfin 5xx processor.
|
|
|
|
config SPI_BFIN_SPORT
|
|
tristate "SPI bus via Blackfin SPORT"
|
|
depends on BLACKFIN
|
|
help
|
|
Enable support for a SPI bus via the Blackfin SPORT peripheral.
|
|
|
|
config SPI_AU1550
|
|
tristate "Au1550/Au1200/Au1300 SPI Controller"
|
|
depends on MIPS_ALCHEMY
|
|
select SPI_BITBANG
|
|
help
|
|
If you say yes to this option, support will be included for the
|
|
PSC SPI controller found on Au1550, Au1200 and Au1300 series.
|
|
|
|
config SPI_BCM63XX
|
|
tristate "Broadcom BCM63xx SPI controller"
|
|
depends on BCM63XX
|
|
help
|
|
Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
|
|
|
|
config SPI_BITBANG
|
|
tristate "Utilities for Bitbanging SPI masters"
|
|
help
|
|
With a few GPIO pins, your system can bitbang the SPI protocol.
|
|
Select this to get SPI support through I/O pins (GPIO, parallel
|
|
port, etc). Or, some systems' SPI master controller drivers use
|
|
this code to manage the per-word or per-transfer accesses to the
|
|
hardware shift registers.
|
|
|
|
This is library code, and is automatically selected by drivers that
|
|
need it. You only need to select this explicitly to support driver
|
|
modules that aren't part of this kernel tree.
|
|
|
|
config SPI_BUTTERFLY
|
|
tristate "Parallel port adapter for AVR Butterfly (DEVELOPMENT)"
|
|
depends on PARPORT
|
|
select SPI_BITBANG
|
|
help
|
|
This uses a custom parallel port cable to connect to an AVR
|
|
Butterfly <http://www.atmel.com/products/avr/butterfly>, an
|
|
inexpensive battery powered microcontroller evaluation board.
|
|
This same cable can be used to flash new firmware.
|
|
|
|
config SPI_CLPS711X
|
|
tristate "CLPS711X host SPI controller"
|
|
depends on ARCH_CLPS711X
|
|
help
|
|
This enables dedicated general purpose SPI/Microwire1-compatible
|
|
master mode interface (SSI1) for CLPS711X-based CPUs.
|
|
|
|
config SPI_COLDFIRE_QSPI
|
|
tristate "Freescale Coldfire QSPI controller"
|
|
depends on (M520x || M523x || M5249 || M525x || M527x || M528x || M532x)
|
|
help
|
|
This enables support for the Coldfire QSPI controller in master
|
|
mode.
|
|
|
|
config SPI_DAVINCI
|
|
tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
|
|
depends on ARCH_DAVINCI
|
|
select SPI_BITBANG
|
|
select TI_EDMA
|
|
help
|
|
SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
|
|
|
|
config SPI_EP93XX
|
|
tristate "Cirrus Logic EP93xx SPI controller"
|
|
depends on ARCH_EP93XX
|
|
help
|
|
This enables using the Cirrus EP93xx SPI controller in master
|
|
mode.
|
|
|
|
config SPI_FALCON
|
|
tristate "Falcon SPI controller support"
|
|
depends on SOC_FALCON
|
|
help
|
|
The external bus unit (EBU) found on the FALC-ON SoC has SPI
|
|
emulation that is designed for serial flash access. This driver
|
|
has only been tested with m25p80 type chips. The hardware has no
|
|
support for other types of SPI peripherals.
|
|
|
|
config SPI_GPIO
|
|
tristate "GPIO-based bitbanging SPI Master"
|
|
depends on GPIOLIB
|
|
select SPI_BITBANG
|
|
help
|
|
This simple GPIO bitbanging SPI master uses the arch-neutral GPIO
|
|
interface to manage MOSI, MISO, SCK, and chipselect signals. SPI
|
|
slaves connected to a bus using this driver are configured as usual,
|
|
except that the spi_board_info.controller_data holds the GPIO number
|
|
for the chipselect used by this controller driver.
|
|
|
|
Note that this driver often won't achieve even 1 Mbit/sec speeds,
|
|
making it unusually slow for SPI. If your platform can inline
|
|
GPIO operations, you should be able to leverage that for better
|
|
speed with a custom version of this driver; see the source code.
|
|
|
|
config SPI_IMX
|
|
tristate "Freescale i.MX SPI controllers"
|
|
depends on ARCH_MXC
|
|
select SPI_BITBANG
|
|
default m if IMX_HAVE_PLATFORM_SPI_IMX
|
|
help
|
|
This enables using the Freescale i.MX SPI controllers in master
|
|
mode.
|
|
|
|
config SPI_LM70_LLP
|
|
tristate "Parallel port adapter for LM70 eval board (DEVELOPMENT)"
|
|
depends on PARPORT
|
|
select SPI_BITBANG
|
|
help
|
|
This driver supports the NS LM70 LLP Evaluation Board,
|
|
which interfaces to an LM70 temperature sensor using
|
|
a parallel port.
|
|
|
|
config SPI_MPC52xx
|
|
tristate "Freescale MPC52xx SPI (non-PSC) controller support"
|
|
depends on PPC_MPC52xx
|
|
help
|
|
This drivers supports the MPC52xx SPI controller in master SPI
|
|
mode.
|
|
|
|
config SPI_MPC52xx_PSC
|
|
tristate "Freescale MPC52xx PSC SPI controller"
|
|
depends on PPC_MPC52xx
|
|
help
|
|
This enables using the Freescale MPC52xx Programmable Serial
|
|
Controller in master SPI mode.
|
|
|
|
config SPI_MPC512x_PSC
|
|
tristate "Freescale MPC512x PSC SPI controller"
|
|
depends on PPC_MPC512x
|
|
help
|
|
This enables using the Freescale MPC5121 Programmable Serial
|
|
Controller in SPI master mode.
|
|
|
|
config SPI_FSL_LIB
|
|
tristate
|
|
depends on OF
|
|
|
|
config SPI_FSL_CPM
|
|
tristate
|
|
depends on FSL_SOC
|
|
|
|
config SPI_FSL_SPI
|
|
bool "Freescale SPI controller and Aeroflex Gaisler GRLIB SPI controller"
|
|
depends on OF
|
|
select SPI_FSL_LIB
|
|
select SPI_FSL_CPM if FSL_SOC
|
|
help
|
|
This enables using the Freescale SPI controllers in master mode.
|
|
MPC83xx platform uses the controller in cpu mode or CPM/QE mode.
|
|
MPC8569 uses the controller in QE mode, MPC8610 in cpu mode.
|
|
This also enables using the Aeroflex Gaisler GRLIB SPI controller in
|
|
master mode.
|
|
|
|
config SPI_FSL_ESPI
|
|
bool "Freescale eSPI controller"
|
|
depends on FSL_SOC
|
|
select SPI_FSL_LIB
|
|
help
|
|
This enables using the Freescale eSPI controllers in master mode.
|
|
From MPC8536, 85xx platform uses the controller, and all P10xx,
|
|
P20xx, P30xx,P40xx, P50xx uses this controller.
|
|
|
|
config SPI_OC_TINY
|
|
tristate "OpenCores tiny SPI"
|
|
depends on GPIOLIB
|
|
select SPI_BITBANG
|
|
help
|
|
This is the driver for OpenCores tiny SPI master controller.
|
|
|
|
config SPI_OCTEON
|
|
tristate "Cavium OCTEON SPI controller"
|
|
depends on CAVIUM_OCTEON_SOC
|
|
help
|
|
SPI host driver for the hardware found on some Cavium OCTEON
|
|
SOCs.
|
|
|
|
config SPI_OMAP_UWIRE
|
|
tristate "OMAP1 MicroWire"
|
|
depends on ARCH_OMAP1
|
|
select SPI_BITBANG
|
|
help
|
|
This hooks up to the MicroWire controller on OMAP1 chips.
|
|
|
|
config SPI_OMAP24XX
|
|
tristate "McSPI driver for OMAP"
|
|
depends on ARCH_OMAP2PLUS
|
|
help
|
|
SPI master controller for OMAP24XX and later Multichannel SPI
|
|
(McSPI) modules.
|
|
|
|
config SPI_OMAP_100K
|
|
tristate "OMAP SPI 100K"
|
|
depends on ARCH_OMAP850 || ARCH_OMAP730
|
|
help
|
|
OMAP SPI 100K master controller for omap7xx boards.
|
|
|
|
config SPI_ORION
|
|
tristate "Orion SPI master"
|
|
depends on PLAT_ORION
|
|
help
|
|
This enables using the SPI master controller on the Orion chips.
|
|
|
|
config SPI_PL022
|
|
tristate "ARM AMBA PL022 SSP controller"
|
|
depends on ARM_AMBA
|
|
default y if MACH_U300
|
|
default y if ARCH_REALVIEW
|
|
default y if INTEGRATOR_IMPD1
|
|
default y if ARCH_VERSATILE
|
|
help
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL022 SSP
|
|
controller. If you have an embedded system with an AMBA(R)
|
|
bus and a PL022 controller, say Y or M here.
|
|
|
|
config SPI_PPC4xx
|
|
tristate "PPC4xx SPI Controller"
|
|
depends on PPC32 && 4xx
|
|
select SPI_BITBANG
|
|
help
|
|
This selects a driver for the PPC4xx SPI Controller.
|
|
|
|
config SPI_PXA2XX_PXADMA
|
|
bool "PXA2xx SSP legacy PXA DMA API support"
|
|
depends on SPI_PXA2XX && ARCH_PXA
|
|
help
|
|
Enable PXA private legacy DMA API support. Note that this is
|
|
deprecated in favor of generic DMA engine API.
|
|
|
|
config SPI_PXA2XX_DMA
|
|
def_bool y
|
|
depends on SPI_PXA2XX && !SPI_PXA2XX_PXADMA
|
|
|
|
config SPI_PXA2XX
|
|
tristate "PXA2xx SSP SPI master"
|
|
depends on (ARCH_PXA || PCI || ACPI) && GENERIC_HARDIRQS
|
|
select PXA_SSP if ARCH_PXA
|
|
help
|
|
This enables using a PXA2xx or Sodaville SSP port as a SPI master
|
|
controller. The driver can be configured to use any SSP port and
|
|
additional documentation can be found a Documentation/spi/pxa2xx.
|
|
|
|
config SPI_PXA2XX_PCI
|
|
def_tristate SPI_PXA2XX && PCI
|
|
|
|
config SPI_RSPI
|
|
tristate "Renesas RSPI controller"
|
|
depends on SUPERH
|
|
help
|
|
SPI driver for Renesas RSPI blocks.
|
|
|
|
config SPI_S3C24XX
|
|
tristate "Samsung S3C24XX series SPI"
|
|
depends on ARCH_S3C24XX
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for Samsung S3C24XX series ARM SoCs
|
|
|
|
config SPI_S3C24XX_FIQ
|
|
bool "S3C24XX driver with FIQ pseudo-DMA"
|
|
depends on SPI_S3C24XX
|
|
select FIQ
|
|
help
|
|
Enable FIQ support for the S3C24XX SPI driver to provide pseudo
|
|
DMA by using the fast-interrupt request framework, This allows
|
|
the driver to get DMA-like performance when there are either
|
|
no free DMA channels, or when doing transfers that required both
|
|
TX and RX data paths.
|
|
|
|
config SPI_S3C64XX
|
|
tristate "Samsung S3C64XX series type SPI"
|
|
depends on (ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5P64X0 || ARCH_EXYNOS)
|
|
select S3C64XX_DMA if ARCH_S3C64XX
|
|
help
|
|
SPI driver for Samsung S3C64XX and newer SoCs.
|
|
|
|
config SPI_SC18IS602
|
|
tristate "NXP SC18IS602/602B/603 I2C to SPI bridge"
|
|
depends on I2C
|
|
help
|
|
SPI driver for NXP SC18IS602/602B/603 I2C to SPI bridge.
|
|
|
|
config SPI_SH_MSIOF
|
|
tristate "SuperH MSIOF SPI controller"
|
|
depends on (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for SuperH and SH Mobile MSIOF blocks.
|
|
|
|
config SPI_SH
|
|
tristate "SuperH SPI controller"
|
|
depends on SUPERH
|
|
help
|
|
SPI driver for SuperH SPI blocks.
|
|
|
|
config SPI_SH_SCI
|
|
tristate "SuperH SCI SPI controller"
|
|
depends on SUPERH
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for SuperH SCI blocks.
|
|
|
|
config SPI_SH_HSPI
|
|
tristate "SuperH HSPI controller"
|
|
depends on ARCH_SHMOBILE
|
|
help
|
|
SPI driver for SuperH HSPI blocks.
|
|
|
|
config SPI_SIRF
|
|
tristate "CSR SiRFprimaII SPI controller"
|
|
depends on ARCH_SIRF
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for CSR SiRFprimaII SoCs
|
|
|
|
config SPI_MXS
|
|
tristate "Freescale MXS SPI controller"
|
|
depends on ARCH_MXS
|
|
select STMP_DEVICE
|
|
help
|
|
SPI driver for Freescale MXS devices.
|
|
|
|
config SPI_TEGRA114
|
|
tristate "NVIDIA Tegra114 SPI Controller"
|
|
depends on ARCH_TEGRA && TEGRA20_APB_DMA
|
|
help
|
|
SPI driver for NVIDIA Tegra114 SPI Controller interface. This controller
|
|
is different than the older SoCs SPI controller and also register interface
|
|
get changed with this controller.
|
|
|
|
config SPI_TEGRA20_SFLASH
|
|
tristate "Nvidia Tegra20 Serial flash Controller"
|
|
depends on ARCH_TEGRA
|
|
help
|
|
SPI driver for Nvidia Tegra20 Serial flash Controller interface.
|
|
The main usecase of this controller is to use spi flash as boot
|
|
device.
|
|
|
|
config SPI_TEGRA20_SLINK
|
|
tristate "Nvidia Tegra20/Tegra30 SLINK Controller"
|
|
depends on ARCH_TEGRA && TEGRA20_APB_DMA
|
|
help
|
|
SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
|
|
|
|
config SPI_TI_SSP
|
|
tristate "TI Sequencer Serial Port - SPI Support"
|
|
depends on MFD_TI_SSP
|
|
help
|
|
This selects an SPI master implementation using a TI sequencer
|
|
serial port.
|
|
|
|
config SPI_TOPCLIFF_PCH
|
|
tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
|
|
depends on PCI
|
|
help
|
|
SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
|
|
used in some x86 embedded processors.
|
|
|
|
This driver also supports the ML7213/ML7223/ML7831, a companion chip
|
|
for the Atom E6xx series and compatible with the Intel EG20T PCH.
|
|
|
|
config SPI_TXX9
|
|
tristate "Toshiba TXx9 SPI controller"
|
|
depends on GPIOLIB && CPU_TX49XX
|
|
help
|
|
SPI driver for Toshiba TXx9 MIPS SoCs
|
|
|
|
config SPI_XCOMM
|
|
tristate "Analog Devices AD-FMCOMMS1-EBZ SPI-I2C-bridge driver"
|
|
depends on I2C
|
|
help
|
|
Support for the SPI-I2C bridge found on the Analog Devices
|
|
AD-FMCOMMS1-EBZ board.
|
|
|
|
config SPI_XILINX
|
|
tristate "Xilinx SPI controller common module"
|
|
depends on HAS_IOMEM
|
|
select SPI_BITBANG
|
|
help
|
|
This exposes the SPI controller IP from the Xilinx EDK.
|
|
|
|
See the "OPB Serial Peripheral Interface (SPI) (v1.00e)"
|
|
Product Specification document (DS464) for hardware details.
|
|
|
|
Or for the DS570, see "XPS Serial Peripheral Interface (SPI) (v2.00b)"
|
|
|
|
config SPI_NUC900
|
|
tristate "Nuvoton NUC900 series SPI"
|
|
depends on ARCH_W90X900
|
|
select SPI_BITBANG
|
|
help
|
|
SPI driver for Nuvoton NUC900 series ARM SoCs
|
|
|
|
#
|
|
# Add new SPI master controllers in alphabetical order above this line
|
|
#
|
|
|
|
config SPI_DESIGNWARE
|
|
tristate "DesignWare SPI controller core support"
|
|
help
|
|
general driver for SPI controller core from DesignWare
|
|
|
|
config SPI_DW_PCI
|
|
tristate "PCI interface driver for DW SPI core"
|
|
depends on SPI_DESIGNWARE && PCI
|
|
|
|
config SPI_DW_MID_DMA
|
|
bool "DMA support for DW SPI controller on Intel Moorestown platform"
|
|
depends on SPI_DW_PCI && INTEL_MID_DMAC
|
|
|
|
config SPI_DW_MMIO
|
|
tristate "Memory-mapped io interface driver for DW SPI core"
|
|
depends on SPI_DESIGNWARE && HAVE_CLK
|
|
|
|
#
|
|
# There are lots of SPI device types, with sensors and memory
|
|
# being probably the most widely used ones.
|
|
#
|
|
comment "SPI Protocol Masters"
|
|
|
|
config SPI_SPIDEV
|
|
tristate "User mode SPI device driver support"
|
|
help
|
|
This supports user mode SPI protocol drivers.
|
|
|
|
Note that this application programming interface is EXPERIMENTAL
|
|
and hence SUBJECT TO CHANGE WITHOUT NOTICE while it stabilizes.
|
|
|
|
config SPI_TLE62X0
|
|
tristate "Infineon TLE62X0 (for power switching)"
|
|
depends on SYSFS
|
|
help
|
|
SPI driver for Infineon TLE62X0 series line driver chips,
|
|
such as the TLE6220, TLE6230 and TLE6240. This provides a
|
|
sysfs interface, with each line presented as a kind of GPIO
|
|
exposing both switch control and diagnostic feedback.
|
|
|
|
#
|
|
# Add new SPI protocol masters in alphabetical order above this line
|
|
#
|
|
|
|
endif # SPI_MASTER
|
|
|
|
# (slave support would go here)
|
|
|
|
endif # SPI
|