UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/phy/marvell.c

1136 lines
28 KiB
C
Raw Blame History

/*
* drivers/net/phy/marvell.c
*
* Driver for Marvell PHYs
*
* Author: Andy Fleming
*
* Copyright (c) 2004 Freescale Semiconductor, Inc.
*
* Copyright (c) 2013 Michael Stapelberg <michael@stapelberg.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/spinlock.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/marvell_phy.h>
#include <linux/of.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <linux/uaccess.h>
#define MII_MARVELL_PHY_PAGE 22
#define MII_M1011_IEVENT 0x13
#define MII_M1011_IEVENT_CLEAR 0x0000
#define MII_M1011_IMASK 0x12
#define MII_M1011_IMASK_INIT 0x6400
#define MII_M1011_IMASK_CLEAR 0x0000
#define MII_M1011_PHY_SCR 0x10
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
#define MII_M1145_PHY_EXT_SR 0x1b
#define MII_M1145_PHY_EXT_CR 0x14
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1145_HWCFG_MODE_MASK 0xf
#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1145_HWCFG_MODE_MASK 0xf
#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
#define MII_M1111_PHY_EXT_CR 0x14
#define MII_M1111_RX_DELAY 0x80
#define MII_M1111_TX_DELAY 0x2
#define MII_M1111_PHY_EXT_SR 0x1b
#define MII_M1111_HWCFG_MODE_MASK 0xf
#define MII_M1111_HWCFG_MODE_COPPER_RGMII 0xb
#define MII_M1111_HWCFG_MODE_FIBER_RGMII 0x3
#define MII_M1111_HWCFG_MODE_SGMII_NO_CLK 0x4
#define MII_M1111_HWCFG_MODE_COPPER_RTBI 0x9
#define MII_M1111_HWCFG_FIBER_COPPER_AUTO 0x8000
#define MII_M1111_HWCFG_FIBER_COPPER_RES 0x2000
#define MII_M1111_COPPER 0
#define MII_M1111_FIBER 1
#define MII_88E1121_PHY_MSCR_PAGE 2
#define MII_88E1121_PHY_MSCR_REG 21
#define MII_88E1121_PHY_MSCR_RX_DELAY BIT(5)
#define MII_88E1121_PHY_MSCR_TX_DELAY BIT(4)
#define MII_88E1121_PHY_MSCR_DELAY_MASK (~(0x3 << 4))
#define MII_88E1318S_PHY_MSCR1_REG 16
#define MII_88E1318S_PHY_MSCR1_PAD_ODD BIT(6)
/* Copper Specific Interrupt Enable Register */
#define MII_88E1318S_PHY_CSIER 0x12
/* WOL Event Interrupt Enable */
#define MII_88E1318S_PHY_CSIER_WOL_EIE BIT(7)
/* LED Timer Control Register */
#define MII_88E1318S_PHY_LED_PAGE 0x03
#define MII_88E1318S_PHY_LED_TCR 0x12
#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
#define MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW BIT(11)
/* Magic Packet MAC address registers */
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD2 0x17
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD1 0x18
#define MII_88E1318S_PHY_MAGIC_PACKET_WORD0 0x19
#define MII_88E1318S_PHY_WOL_PAGE 0x11
#define MII_88E1318S_PHY_WOL_CTRL 0x10
#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
#define MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE BIT(14)
#define MII_88E1121_PHY_LED_CTRL 16
#define MII_88E1121_PHY_LED_PAGE 3
#define MII_88E1121_PHY_LED_DEF 0x0030
#define MII_M1011_PHY_STATUS 0x11
#define MII_M1011_PHY_STATUS_1000 0x8000
#define MII_M1011_PHY_STATUS_100 0x4000
#define MII_M1011_PHY_STATUS_SPD_MASK 0xc000
#define MII_M1011_PHY_STATUS_FULLDUPLEX 0x2000
#define MII_M1011_PHY_STATUS_RESOLVED 0x0800
#define MII_M1011_PHY_STATUS_LINK 0x0400
#define MII_M1116R_CONTROL_REG_MAC 21
#define MII_88E3016_PHY_SPEC_CTRL 0x10
#define MII_88E3016_DISABLE_SCRAMBLER 0x0200
#define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030
MODULE_DESCRIPTION("Marvell PHY driver");
MODULE_AUTHOR("Andy Fleming");
MODULE_LICENSE("GPL");
static int marvell_ack_interrupt(struct phy_device *phydev)
{
int err;
/* Clear the interrupts by reading the reg */
err = phy_read(phydev, MII_M1011_IEVENT);
if (err < 0)
return err;
return 0;
}
static int marvell_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
else
err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
return err;
}
static int marvell_config_aneg(struct phy_device *phydev)
{
int err;
/* The Marvell PHY has an errata which requires
* that certain registers get written in order
* to restart autonegotiation */
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x1f);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x200c);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x5);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x100);
if (err < 0)
return err;
err = phy_write(phydev, MII_M1011_PHY_SCR,
MII_M1011_PHY_SCR_AUTO_CROSS);
if (err < 0)
return err;
err = phy_write(phydev, MII_M1111_PHY_LED_CONTROL,
MII_M1111_PHY_LED_DIRECT);
if (err < 0)
return err;
err = genphy_config_aneg(phydev);
if (err < 0)
return err;
if (phydev->autoneg != AUTONEG_ENABLE) {
int bmcr;
/*
* A write to speed/duplex bits (that is performed by
* genphy_config_aneg() call above) must be followed by
* a software reset. Otherwise, the write has no effect.
*/
bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
err = phy_write(phydev, MII_BMCR, bmcr | BMCR_RESET);
if (err < 0)
return err;
}
return 0;
}
#ifdef CONFIG_OF_MDIO
/*
* Set and/or override some configuration registers based on the
* marvell,reg-init property stored in the of_node for the phydev.
*
* marvell,reg-init = <reg-page reg mask value>,...;
*
* There may be one or more sets of <reg-page reg mask value>:
*
* reg-page: which register bank to use.
* reg: the register.
* mask: if non-zero, ANDed with existing register value.
* value: ORed with the masked value and written to the regiser.
*
*/
static int marvell_of_reg_init(struct phy_device *phydev)
{
const __be32 *paddr;
int len, i, saved_page, current_page, page_changed, ret;
if (!phydev->dev.of_node)
return 0;
paddr = of_get_property(phydev->dev.of_node, "marvell,reg-init", &len);
if (!paddr || len < (4 * sizeof(*paddr)))
return 0;
saved_page = phy_read(phydev, MII_MARVELL_PHY_PAGE);
if (saved_page < 0)
return saved_page;
page_changed = 0;
current_page = saved_page;
ret = 0;
len /= sizeof(*paddr);
for (i = 0; i < len - 3; i += 4) {
u16 reg_page = be32_to_cpup(paddr + i);
u16 reg = be32_to_cpup(paddr + i + 1);
u16 mask = be32_to_cpup(paddr + i + 2);
u16 val_bits = be32_to_cpup(paddr + i + 3);
int val;
if (reg_page != current_page) {
current_page = reg_page;
page_changed = 1;
ret = phy_write(phydev, MII_MARVELL_PHY_PAGE, reg_page);
if (ret < 0)
goto err;
}
val = 0;
if (mask) {
val = phy_read(phydev, reg);
if (val < 0) {
ret = val;
goto err;
}
val &= mask;
}
val |= val_bits;
ret = phy_write(phydev, reg, val);
if (ret < 0)
goto err;
}
err:
if (page_changed) {
i = phy_write(phydev, MII_MARVELL_PHY_PAGE, saved_page);
if (ret == 0)
ret = i;
}
return ret;
}
#else
static int marvell_of_reg_init(struct phy_device *phydev)
{
return 0;
}
#endif /* CONFIG_OF_MDIO */
static int m88e1121_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
if (phy_interface_is_rgmii(phydev)) {
mscr = phy_read(phydev, MII_88E1121_PHY_MSCR_REG) &
MII_88E1121_PHY_MSCR_DELAY_MASK;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
mscr |= (MII_88E1121_PHY_MSCR_RX_DELAY |
MII_88E1121_PHY_MSCR_TX_DELAY);
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
mscr |= MII_88E1121_PHY_MSCR_RX_DELAY;
else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
mscr |= MII_88E1121_PHY_MSCR_TX_DELAY;
err = phy_write(phydev, MII_88E1121_PHY_MSCR_REG, mscr);
if (err < 0)
return err;
}
phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
err = phy_write(phydev, MII_M1011_PHY_SCR,
MII_M1011_PHY_SCR_AUTO_CROSS);
if (err < 0)
return err;
oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_88E1121_PHY_LED_PAGE);
phy_write(phydev, MII_88E1121_PHY_LED_CTRL, MII_88E1121_PHY_LED_DEF);
phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
err = genphy_config_aneg(phydev);
return err;
}
static int m88e1318_config_aneg(struct phy_device *phydev)
{
int err, oldpage, mscr;
oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1121_PHY_MSCR_PAGE);
if (err < 0)
return err;
mscr = phy_read(phydev, MII_88E1318S_PHY_MSCR1_REG);
mscr |= MII_88E1318S_PHY_MSCR1_PAD_ODD;
err = phy_write(phydev, MII_88E1318S_PHY_MSCR1_REG, mscr);
if (err < 0)
return err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
if (err < 0)
return err;
return m88e1121_config_aneg(phydev);
}
static int m88e1510_config_aneg(struct phy_device *phydev)
{
int err;
err = m88e1318_config_aneg(phydev);
if (err < 0)
return err;
return marvell_of_reg_init(phydev);
}
static int m88e1116r_config_init(struct phy_device *phydev)
{
int temp;
int err;
temp = phy_read(phydev, MII_BMCR);
temp |= BMCR_RESET;
err = phy_write(phydev, MII_BMCR, temp);
if (err < 0)
return err;
mdelay(500);
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
if (err < 0)
return err;
temp = phy_read(phydev, MII_M1011_PHY_SCR);
temp |= (7 << 12); /* max number of gigabit attempts */
temp |= (1 << 11); /* enable downshift */
temp |= MII_M1011_PHY_SCR_AUTO_CROSS;
err = phy_write(phydev, MII_M1011_PHY_SCR, temp);
if (err < 0)
return err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 2);
if (err < 0)
return err;
temp = phy_read(phydev, MII_M1116R_CONTROL_REG_MAC);
temp |= (1 << 5);
temp |= (1 << 4);
err = phy_write(phydev, MII_M1116R_CONTROL_REG_MAC, temp);
if (err < 0)
return err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0);
if (err < 0)
return err;
temp = phy_read(phydev, MII_BMCR);
temp |= BMCR_RESET;
err = phy_write(phydev, MII_BMCR, temp);
if (err < 0)
return err;
mdelay(500);
return 0;
}
static int m88e3016_config_init(struct phy_device *phydev)
{
int reg;
/* Enable Scrambler and Auto-Crossover */
reg = phy_read(phydev, MII_88E3016_PHY_SPEC_CTRL);
if (reg < 0)
return reg;
reg &= ~MII_88E3016_DISABLE_SCRAMBLER;
reg |= MII_88E3016_AUTO_MDIX_CROSSOVER;
reg = phy_write(phydev, MII_88E3016_PHY_SPEC_CTRL, reg);
if (reg < 0)
return reg;
return 0;
}
static int m88e1111_config_init(struct phy_device *phydev)
{
int err;
int temp;
if (phy_interface_is_rgmii(phydev)) {
temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
if (temp < 0)
return temp;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_RXID) {
temp &= ~MII_M1111_TX_DELAY;
temp |= MII_M1111_RX_DELAY;
} else if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) {
temp &= ~MII_M1111_RX_DELAY;
temp |= MII_M1111_TX_DELAY;
}
err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
if (err < 0)
return err;
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
temp &= ~(MII_M1111_HWCFG_MODE_MASK);
if (temp & MII_M1111_HWCFG_FIBER_COPPER_RES)
temp |= MII_M1111_HWCFG_MODE_FIBER_RGMII;
else
temp |= MII_M1111_HWCFG_MODE_COPPER_RGMII;
err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
if (err < 0)
return err;
}
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
temp &= ~(MII_M1111_HWCFG_MODE_MASK);
temp |= MII_M1111_HWCFG_MODE_SGMII_NO_CLK;
temp |= MII_M1111_HWCFG_FIBER_COPPER_AUTO;
err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
if (err < 0)
return err;
}
if (phydev->interface == PHY_INTERFACE_MODE_RTBI) {
temp = phy_read(phydev, MII_M1111_PHY_EXT_CR);
if (temp < 0)
return temp;
temp |= (MII_M1111_RX_DELAY | MII_M1111_TX_DELAY);
err = phy_write(phydev, MII_M1111_PHY_EXT_CR, temp);
if (err < 0)
return err;
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
temp |= 0x7 | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
if (err < 0)
return err;
/* soft reset */
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
do
temp = phy_read(phydev, MII_BMCR);
while (temp & BMCR_RESET);
temp = phy_read(phydev, MII_M1111_PHY_EXT_SR);
if (temp < 0)
return temp;
temp &= ~(MII_M1111_HWCFG_MODE_MASK | MII_M1111_HWCFG_FIBER_COPPER_RES);
temp |= MII_M1111_HWCFG_MODE_COPPER_RTBI | MII_M1111_HWCFG_FIBER_COPPER_AUTO;
err = phy_write(phydev, MII_M1111_PHY_EXT_SR, temp);
if (err < 0)
return err;
}
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
return phy_write(phydev, MII_BMCR, BMCR_RESET);
}
static int m88e1118_config_aneg(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err < 0)
return err;
err = phy_write(phydev, MII_M1011_PHY_SCR,
MII_M1011_PHY_SCR_AUTO_CROSS);
if (err < 0)
return err;
err = genphy_config_aneg(phydev);
return 0;
}
static int m88e1118_config_init(struct phy_device *phydev)
{
int err;
/* Change address */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
if (err < 0)
return err;
/* Enable 1000 Mbit */
err = phy_write(phydev, 0x15, 0x1070);
if (err < 0)
return err;
/* Change address */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0003);
if (err < 0)
return err;
/* Adjust LED Control */
if (phydev->dev_flags & MARVELL_PHY_M1118_DNS323_LEDS)
err = phy_write(phydev, 0x10, 0x1100);
else
err = phy_write(phydev, 0x10, 0x021e);
if (err < 0)
return err;
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
/* Reset address */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
if (err < 0)
return err;
return phy_write(phydev, MII_BMCR, BMCR_RESET);
}
static int m88e1149_config_init(struct phy_device *phydev)
{
int err;
/* Change address */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0002);
if (err < 0)
return err;
/* Enable 1000 Mbit */
err = phy_write(phydev, 0x15, 0x1048);
if (err < 0)
return err;
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
/* Reset address */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x0);
if (err < 0)
return err;
return phy_write(phydev, MII_BMCR, BMCR_RESET);
}
static int m88e1145_config_init(struct phy_device *phydev)
{
int err;
int temp;
/* Take care of errata E0 & E1 */
err = phy_write(phydev, 0x1d, 0x001b);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x418f);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x0016);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0xa2da);
if (err < 0)
return err;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) {
int temp = phy_read(phydev, MII_M1145_PHY_EXT_CR);
if (temp < 0)
return temp;
temp |= (MII_M1145_RGMII_RX_DELAY | MII_M1145_RGMII_TX_DELAY);
err = phy_write(phydev, MII_M1145_PHY_EXT_CR, temp);
if (err < 0)
return err;
if (phydev->dev_flags & MARVELL_PHY_M1145_FLAGS_RESISTANCE) {
err = phy_write(phydev, 0x1d, 0x0012);
if (err < 0)
return err;
temp = phy_read(phydev, 0x1e);
if (temp < 0)
return temp;
temp &= 0xf03f;
temp |= 2 << 9; /* 36 ohm */
temp |= 2 << 6; /* 39 ohm */
err = phy_write(phydev, 0x1e, temp);
if (err < 0)
return err;
err = phy_write(phydev, 0x1d, 0x3);
if (err < 0)
return err;
err = phy_write(phydev, 0x1e, 0x8000);
if (err < 0)
return err;
}
}
if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
if (temp < 0)
return temp;
temp &= ~MII_M1145_HWCFG_MODE_MASK;
temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
if (err < 0)
return err;
}
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
return 0;
}
/* marvell_read_status
*
* Generic status code does not detect Fiber correctly!
* Description:
* Check the link, then figure out the current state
* by comparing what we advertise with what the link partner
* advertises. Start by checking the gigabit possibilities,
* then move on to 10/100.
*/
static int marvell_read_status(struct phy_device *phydev)
{
int adv;
int err;
int lpa;
int status = 0;
/* Update the link, but return if there
* was an error */
err = genphy_update_link(phydev);
if (err)
return err;
if (AUTONEG_ENABLE == phydev->autoneg) {
status = phy_read(phydev, MII_M1011_PHY_STATUS);
if (status < 0)
return status;
lpa = phy_read(phydev, MII_LPA);
if (lpa < 0)
return lpa;
adv = phy_read(phydev, MII_ADVERTISE);
if (adv < 0)
return adv;
lpa &= adv;
if (status & MII_M1011_PHY_STATUS_FULLDUPLEX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
status = status & MII_M1011_PHY_STATUS_SPD_MASK;
phydev->pause = phydev->asym_pause = 0;
switch (status) {
case MII_M1011_PHY_STATUS_1000:
phydev->speed = SPEED_1000;
break;
case MII_M1011_PHY_STATUS_100:
phydev->speed = SPEED_100;
break;
default:
phydev->speed = SPEED_10;
break;
}
if (phydev->duplex == DUPLEX_FULL) {
phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
}
} else {
int bmcr = phy_read(phydev, MII_BMCR);
if (bmcr < 0)
return bmcr;
if (bmcr & BMCR_FULLDPLX)
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
if (bmcr & BMCR_SPEED1000)
phydev->speed = SPEED_1000;
else if (bmcr & BMCR_SPEED100)
phydev->speed = SPEED_100;
else
phydev->speed = SPEED_10;
phydev->pause = phydev->asym_pause = 0;
}
return 0;
}
static int marvell_aneg_done(struct phy_device *phydev)
{
int retval = phy_read(phydev, MII_M1011_PHY_STATUS);
return (retval < 0) ? retval : (retval & MII_M1011_PHY_STATUS_RESOLVED);
}
static int m88e1121_did_interrupt(struct phy_device *phydev)
{
int imask;
imask = phy_read(phydev, MII_M1011_IEVENT);
if (imask & MII_M1011_IMASK_INIT)
return 1;
return 0;
}
static void m88e1318_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
wol->supported = WAKE_MAGIC;
wol->wolopts = 0;
if (phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_WOL_PAGE) < 0)
return;
if (phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL) &
MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE)
wol->wolopts |= WAKE_MAGIC;
if (phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00) < 0)
return;
}
static int m88e1318_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol)
{
int err, oldpage, temp;
oldpage = phy_read(phydev, MII_MARVELL_PHY_PAGE);
if (wol->wolopts & WAKE_MAGIC) {
/* Explicitly switch to page 0x00, just to be sure */
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0x00);
if (err < 0)
return err;
/* Enable the WOL interrupt */
temp = phy_read(phydev, MII_88E1318S_PHY_CSIER);
temp |= MII_88E1318S_PHY_CSIER_WOL_EIE;
err = phy_write(phydev, MII_88E1318S_PHY_CSIER, temp);
if (err < 0)
return err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_LED_PAGE);
if (err < 0)
return err;
/* Setup LED[2] as interrupt pin (active low) */
temp = phy_read(phydev, MII_88E1318S_PHY_LED_TCR);
temp &= ~MII_88E1318S_PHY_LED_TCR_FORCE_INT;
temp |= MII_88E1318S_PHY_LED_TCR_INTn_ENABLE;
temp |= MII_88E1318S_PHY_LED_TCR_INT_ACTIVE_LOW;
err = phy_write(phydev, MII_88E1318S_PHY_LED_TCR, temp);
if (err < 0)
return err;
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_WOL_PAGE);
if (err < 0)
return err;
/* Store the device address for the magic packet */
err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD2,
((phydev->attached_dev->dev_addr[5] << 8) |
phydev->attached_dev->dev_addr[4]));
if (err < 0)
return err;
err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD1,
((phydev->attached_dev->dev_addr[3] << 8) |
phydev->attached_dev->dev_addr[2]));
if (err < 0)
return err;
err = phy_write(phydev, MII_88E1318S_PHY_MAGIC_PACKET_WORD0,
((phydev->attached_dev->dev_addr[1] << 8) |
phydev->attached_dev->dev_addr[0]));
if (err < 0)
return err;
/* Clear WOL status and enable magic packet matching */
temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
temp |= MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
if (err < 0)
return err;
} else {
err = phy_write(phydev, MII_MARVELL_PHY_PAGE,
MII_88E1318S_PHY_WOL_PAGE);
if (err < 0)
return err;
/* Clear WOL status and disable magic packet matching */
temp = phy_read(phydev, MII_88E1318S_PHY_WOL_CTRL);
temp |= MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS;
temp &= ~MII_88E1318S_PHY_WOL_CTRL_MAGIC_PACKET_MATCH_ENABLE;
err = phy_write(phydev, MII_88E1318S_PHY_WOL_CTRL, temp);
if (err < 0)
return err;
}
err = phy_write(phydev, MII_MARVELL_PHY_PAGE, oldpage);
if (err < 0)
return err;
return 0;
}
static struct phy_driver marvell_drivers[] = {
{
.phy_id = MARVELL_PHY_ID_88E1101,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1101",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1112,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1112",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1111_config_init,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1111,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1111",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1111_config_init,
.config_aneg = &marvell_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1118,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1118",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1118_config_init,
.config_aneg = &m88e1118_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = {.owner = THIS_MODULE,},
},
{
.phy_id = MARVELL_PHY_ID_88E1121R,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1121R",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &m88e1121_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.did_interrupt = &m88e1121_did_interrupt,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1318S,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1318S",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &m88e1318_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.did_interrupt = &m88e1121_did_interrupt,
.get_wol = &m88e1318_get_wol,
.set_wol = &m88e1318_set_wol,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1145,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1145",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1145_config_init,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1149R,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1149R",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1149_config_init,
.config_aneg = &m88e1118_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1240,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1240",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1111_config_init,
.config_aneg = &marvell_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1116R,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1116R",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_init = &m88e1116r_config_init,
.config_aneg = &genphy_config_aneg,
.read_status = &genphy_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E1510,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E1510",
.features = PHY_GBIT_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &m88e1510_config_aneg,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.did_interrupt = &m88e1121_did_interrupt,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
{
.phy_id = MARVELL_PHY_ID_88E3016,
.phy_id_mask = MARVELL_PHY_ID_MASK,
.name = "Marvell 88E3016",
.features = PHY_BASIC_FEATURES,
.flags = PHY_HAS_INTERRUPT,
.config_aneg = &genphy_config_aneg,
.config_init = &m88e3016_config_init,
.aneg_done = &marvell_aneg_done,
.read_status = &marvell_read_status,
.ack_interrupt = &marvell_ack_interrupt,
.config_intr = &marvell_config_intr,
.did_interrupt = &m88e1121_did_interrupt,
.resume = &genphy_resume,
.suspend = &genphy_suspend,
.driver = { .owner = THIS_MODULE },
},
};
module_phy_driver(marvell_drivers);
static struct mdio_device_id __maybe_unused marvell_tbl[] = {
{ MARVELL_PHY_ID_88E1101, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1112, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1111, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1118, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1121R, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1145, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1149R, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1240, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1318S, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1116R, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E1510, MARVELL_PHY_ID_MASK },
{ MARVELL_PHY_ID_88E3016, MARVELL_PHY_ID_MASK },
{ }
};
MODULE_DEVICE_TABLE(mdio, marvell_tbl);
Reference in New Issue View Git Blame Copy Permalink