OpenCloudOS-Kernel/drivers/power/supply/axp288_charger.c

986 lines
27 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* axp288_charger.c - X-power AXP288 PMIC Charger driver
*
* Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
* Copyright (C) 2014 Intel Corporation
* Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
*/
#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/regmap.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/usb/otg.h>
#include <linux/notifier.h>
#include <linux/power_supply.h>
#include <linux/property.h>
#include <linux/mfd/axp20x.h>
#include <linux/extcon.h>
#include <linux/dmi.h>
#include <asm/iosf_mbi.h>
#define PS_STAT_VBUS_TRIGGER BIT(0)
#define PS_STAT_BAT_CHRG_DIR BIT(2)
#define PS_STAT_VBAT_ABOVE_VHOLD BIT(3)
#define PS_STAT_VBUS_VALID BIT(4)
#define PS_STAT_VBUS_PRESENT BIT(5)
#define CHRG_STAT_BAT_SAFE_MODE BIT(3)
#define CHRG_STAT_BAT_VALID BIT(4)
#define CHRG_STAT_BAT_PRESENT BIT(5)
#define CHRG_STAT_CHARGING BIT(6)
#define CHRG_STAT_PMIC_OTP BIT(7)
#define VBUS_ISPOUT_CUR_LIM_MASK 0x03
#define VBUS_ISPOUT_CUR_LIM_BIT_POS 0
#define VBUS_ISPOUT_CUR_LIM_900MA 0x0 /* 900mA */
#define VBUS_ISPOUT_CUR_LIM_1500MA 0x1 /* 1500mA */
#define VBUS_ISPOUT_CUR_LIM_2000MA 0x2 /* 2000mA */
#define VBUS_ISPOUT_CUR_NO_LIM 0x3 /* 2500mA */
#define VBUS_ISPOUT_VHOLD_SET_MASK 0x38
#define VBUS_ISPOUT_VHOLD_SET_BIT_POS 0x3
#define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000 /* 4000mV */
#define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100 /* 100mV */
#define VBUS_ISPOUT_VHOLD_SET_4400MV 0x4 /* 4400mV */
#define VBUS_ISPOUT_VBUS_PATH_DIS BIT(7)
#define CHRG_CCCV_CC_MASK 0xf /* 4 bits */
#define CHRG_CCCV_CC_BIT_POS 0
#define CHRG_CCCV_CC_OFFSET 200 /* 200mA */
#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
#define CHRG_CCCV_ITERM_20P BIT(4) /* 20% of CC */
#define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */
#define CHRG_CCCV_CV_BIT_POS 5
#define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */
#define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */
#define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */
#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
#define CHRG_CCCV_CHG_EN BIT(7)
#define CNTL2_CC_TIMEOUT_MASK 0x3 /* 2 bits */
#define CNTL2_CC_TIMEOUT_OFFSET 6 /* 6 Hrs */
#define CNTL2_CC_TIMEOUT_LSB_RES 2 /* 2 Hrs */
#define CNTL2_CC_TIMEOUT_12HRS 0x3 /* 12 Hrs */
#define CNTL2_CHGLED_TYPEB BIT(4)
#define CNTL2_CHG_OUT_TURNON BIT(5)
#define CNTL2_PC_TIMEOUT_MASK 0xC0
#define CNTL2_PC_TIMEOUT_OFFSET 40 /* 40 mins */
#define CNTL2_PC_TIMEOUT_LSB_RES 10 /* 10 mins */
#define CNTL2_PC_TIMEOUT_70MINS 0x3
#define CHRG_ILIM_TEMP_LOOP_EN BIT(3)
#define CHRG_VBUS_ILIM_MASK 0xf0
#define CHRG_VBUS_ILIM_BIT_POS 4
#define CHRG_VBUS_ILIM_100MA 0x0 /* 100mA */
#define CHRG_VBUS_ILIM_500MA 0x1 /* 500mA */
#define CHRG_VBUS_ILIM_900MA 0x2 /* 900mA */
#define CHRG_VBUS_ILIM_1500MA 0x3 /* 1500mA */
#define CHRG_VBUS_ILIM_2000MA 0x4 /* 2000mA */
#define CHRG_VBUS_ILIM_2500MA 0x5 /* 2500mA */
#define CHRG_VBUS_ILIM_3000MA 0x6 /* 3000mA */
#define CHRG_VBUS_ILIM_3500MA 0x7 /* 3500mA */
#define CHRG_VBUS_ILIM_4000MA 0x8 /* 4000mA */
#define CHRG_VLTFC_0C 0xA5 /* 0 DegC */
#define CHRG_VHTFC_45C 0x1F /* 45 DegC */
#define FG_CNTL_OCV_ADJ_EN BIT(3)
#define CV_4100MV 4100 /* 4100mV */
#define CV_4150MV 4150 /* 4150mV */
#define CV_4200MV 4200 /* 4200mV */
#define CV_4350MV 4350 /* 4350mV */
#define AXP288_REG_UPDATE_INTERVAL (60 * HZ)
#define AXP288_EXTCON_DEV_NAME "axp288_extcon"
#define USB_HOST_EXTCON_HID "INT3496"
#define USB_HOST_EXTCON_NAME "INT3496:00"
enum {
VBUS_OV_IRQ = 0,
CHARGE_DONE_IRQ,
CHARGE_CHARGING_IRQ,
BAT_SAFE_QUIT_IRQ,
BAT_SAFE_ENTER_IRQ,
QCBTU_IRQ,
CBTU_IRQ,
QCBTO_IRQ,
CBTO_IRQ,
CHRG_INTR_END,
};
struct axp288_chrg_info {
struct platform_device *pdev;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
int irq[CHRG_INTR_END];
struct power_supply *psy_usb;
struct mutex lock;
/* OTG/Host mode */
struct {
struct work_struct work;
struct extcon_dev *cable;
struct notifier_block id_nb;
bool id_short;
} otg;
/* SDP/CDP/DCP USB charging cable notifications */
struct {
struct extcon_dev *edev;
struct notifier_block nb;
struct work_struct work;
} cable;
int cc;
int cv;
int max_cc;
int max_cv;
unsigned long last_updated;
unsigned int input_status;
unsigned int op_mode;
unsigned int backend_control;
bool valid;
};
static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
{
u8 reg_val;
int ret;
if (cc < CHRG_CCCV_CC_OFFSET)
cc = CHRG_CCCV_CC_OFFSET;
else if (cc > info->max_cc)
cc = info->max_cc;
reg_val = (cc - CHRG_CCCV_CC_OFFSET) / CHRG_CCCV_CC_LSB_RES;
cc = (reg_val * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
reg_val = reg_val << CHRG_CCCV_CC_BIT_POS;
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL1,
CHRG_CCCV_CC_MASK, reg_val);
if (ret >= 0)
info->cc = cc;
return ret;
}
static inline int axp288_charger_set_cv(struct axp288_chrg_info *info, int cv)
{
u8 reg_val;
int ret;
if (cv <= CV_4100MV) {
reg_val = CHRG_CCCV_CV_4100MV;
cv = CV_4100MV;
} else if (cv <= CV_4150MV) {
reg_val = CHRG_CCCV_CV_4150MV;
cv = CV_4150MV;
} else if (cv <= CV_4200MV) {
reg_val = CHRG_CCCV_CV_4200MV;
cv = CV_4200MV;
} else {
reg_val = CHRG_CCCV_CV_4350MV;
cv = CV_4350MV;
}
reg_val = reg_val << CHRG_CCCV_CV_BIT_POS;
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL1,
CHRG_CCCV_CV_MASK, reg_val);
if (ret >= 0)
info->cv = cv;
return ret;
}
static int axp288_charger_get_vbus_inlmt(struct axp288_chrg_info *info)
{
unsigned int val;
val = info->backend_control;
val >>= CHRG_VBUS_ILIM_BIT_POS;
switch (val) {
case CHRG_VBUS_ILIM_100MA:
return 100000;
case CHRG_VBUS_ILIM_500MA:
return 500000;
case CHRG_VBUS_ILIM_900MA:
return 900000;
case CHRG_VBUS_ILIM_1500MA:
return 1500000;
case CHRG_VBUS_ILIM_2000MA:
return 2000000;
case CHRG_VBUS_ILIM_2500MA:
return 2500000;
case CHRG_VBUS_ILIM_3000MA:
return 3000000;
case CHRG_VBUS_ILIM_3500MA:
return 3500000;
default:
/* All b1xxx values map to 4000 mA */
return 4000000;
}
}
static inline int axp288_charger_set_vbus_inlmt(struct axp288_chrg_info *info,
int inlmt)
{
int ret;
u8 reg_val;
if (inlmt >= 4000000)
reg_val = CHRG_VBUS_ILIM_4000MA << CHRG_VBUS_ILIM_BIT_POS;
else if (inlmt >= 3500000)
reg_val = CHRG_VBUS_ILIM_3500MA << CHRG_VBUS_ILIM_BIT_POS;
else if (inlmt >= 3000000)
reg_val = CHRG_VBUS_ILIM_3000MA << CHRG_VBUS_ILIM_BIT_POS;
else if (inlmt >= 2500000)
reg_val = CHRG_VBUS_ILIM_2500MA << CHRG_VBUS_ILIM_BIT_POS;
else if (inlmt >= 2000000)
reg_val = CHRG_VBUS_ILIM_2000MA << CHRG_VBUS_ILIM_BIT_POS;
else if (inlmt >= 1500000)
reg_val = CHRG_VBUS_ILIM_1500MA << CHRG_VBUS_ILIM_BIT_POS;
else if (inlmt >= 900000)
reg_val = CHRG_VBUS_ILIM_900MA << CHRG_VBUS_ILIM_BIT_POS;
else if (inlmt >= 500000)
reg_val = CHRG_VBUS_ILIM_500MA << CHRG_VBUS_ILIM_BIT_POS;
else
reg_val = CHRG_VBUS_ILIM_100MA << CHRG_VBUS_ILIM_BIT_POS;
ret = regmap_update_bits(info->regmap, AXP20X_CHRG_BAK_CTRL,
CHRG_VBUS_ILIM_MASK, reg_val);
if (ret < 0)
dev_err(&info->pdev->dev, "charger BAK control %d\n", ret);
return ret;
}
static int axp288_charger_vbus_path_select(struct axp288_chrg_info *info,
bool enable)
{
int ret;
if (enable)
ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
VBUS_ISPOUT_VBUS_PATH_DIS, 0);
else
ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
VBUS_ISPOUT_VBUS_PATH_DIS, VBUS_ISPOUT_VBUS_PATH_DIS);
if (ret < 0)
dev_err(&info->pdev->dev, "axp288 vbus path select %d\n", ret);
return ret;
}
static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
bool enable)
{
int ret;
if (enable)
ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
else
ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
CHRG_CCCV_CHG_EN, 0);
if (ret < 0)
dev_err(&info->pdev->dev, "axp288 enable charger %d\n", ret);
return ret;
}
static int axp288_get_charger_health(struct axp288_chrg_info *info)
{
if (!(info->input_status & PS_STAT_VBUS_PRESENT))
return POWER_SUPPLY_HEALTH_UNKNOWN;
if (!(info->input_status & PS_STAT_VBUS_VALID))
return POWER_SUPPLY_HEALTH_DEAD;
else if (info->op_mode & CHRG_STAT_PMIC_OTP)
return POWER_SUPPLY_HEALTH_OVERHEAT;
else if (info->op_mode & CHRG_STAT_BAT_SAFE_MODE)
return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
else
return POWER_SUPPLY_HEALTH_GOOD;
}
static int axp288_charger_usb_set_property(struct power_supply *psy,
enum power_supply_property psp,
const union power_supply_propval *val)
{
struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
int ret = 0;
int scaled_val;
mutex_lock(&info->lock);
switch (psp) {
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
scaled_val = min(val->intval, info->max_cc);
scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
ret = axp288_charger_set_cc(info, scaled_val);
if (ret < 0) {
dev_warn(&info->pdev->dev, "set charge current failed\n");
goto out;
}
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
scaled_val = min(val->intval, info->max_cv);
scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
ret = axp288_charger_set_cv(info, scaled_val);
if (ret < 0) {
dev_warn(&info->pdev->dev, "set charge voltage failed\n");
goto out;
}
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = axp288_charger_set_vbus_inlmt(info, val->intval);
if (ret < 0) {
dev_warn(&info->pdev->dev, "set input current limit failed\n");
goto out;
}
info->valid = false;
break;
default:
ret = -EINVAL;
}
out:
mutex_unlock(&info->lock);
return ret;
}
static int axp288_charger_reg_readb(struct axp288_chrg_info *info, int reg, unsigned int *ret_val)
{
int ret;
ret = regmap_read(info->regmap, reg, ret_val);
if (ret < 0) {
dev_err(&info->pdev->dev, "Error %d on reading value from register 0x%04x\n",
ret,
reg);
return ret;
}
return 0;
}
static int axp288_charger_usb_update_property(struct axp288_chrg_info *info)
{
int ret = 0;
if (info->valid && time_before(jiffies, info->last_updated + AXP288_REG_UPDATE_INTERVAL))
return 0;
dev_dbg(&info->pdev->dev, "Charger updating register values...\n");
ret = iosf_mbi_block_punit_i2c_access();
if (ret < 0)
return ret;
ret = axp288_charger_reg_readb(info, AXP20X_PWR_INPUT_STATUS, &info->input_status);
if (ret < 0)
goto out;
ret = axp288_charger_reg_readb(info, AXP20X_PWR_OP_MODE, &info->op_mode);
if (ret < 0)
goto out;
ret = axp288_charger_reg_readb(info, AXP20X_CHRG_BAK_CTRL, &info->backend_control);
if (ret < 0)
goto out;
info->last_updated = jiffies;
info->valid = true;
out:
iosf_mbi_unblock_punit_i2c_access();
return ret;
}
static int axp288_charger_usb_get_property(struct power_supply *psy,
enum power_supply_property psp,
union power_supply_propval *val)
{
struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
int ret;
mutex_lock(&info->lock);
ret = axp288_charger_usb_update_property(info);
if (ret < 0)
goto out;
switch (psp) {
case POWER_SUPPLY_PROP_PRESENT:
/* Check for OTG case first */
if (info->otg.id_short) {
val->intval = 0;
break;
}
val->intval = (info->input_status & PS_STAT_VBUS_PRESENT) ? 1 : 0;
break;
case POWER_SUPPLY_PROP_ONLINE:
/* Check for OTG case first */
if (info->otg.id_short) {
val->intval = 0;
break;
}
val->intval = (info->input_status & PS_STAT_VBUS_VALID) ? 1 : 0;
break;
case POWER_SUPPLY_PROP_HEALTH:
val->intval = axp288_get_charger_health(info);
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
val->intval = info->cc * 1000;
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
val->intval = info->max_cc * 1000;
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
val->intval = info->cv * 1000;
break;
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
val->intval = info->max_cv * 1000;
break;
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
val->intval = axp288_charger_get_vbus_inlmt(info);
break;
default:
ret = -EINVAL;
}
out:
mutex_unlock(&info->lock);
return ret;
}
static int axp288_charger_property_is_writeable(struct power_supply *psy,
enum power_supply_property psp)
{
int ret;
switch (psp) {
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
ret = 1;
break;
default:
ret = 0;
}
return ret;
}
static enum power_supply_property axp288_usb_props[] = {
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_ONLINE,
POWER_SUPPLY_PROP_TYPE,
POWER_SUPPLY_PROP_HEALTH,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
};
static const struct power_supply_desc axp288_charger_desc = {
.name = "axp288_charger",
.type = POWER_SUPPLY_TYPE_USB,
.properties = axp288_usb_props,
.num_properties = ARRAY_SIZE(axp288_usb_props),
.get_property = axp288_charger_usb_get_property,
.set_property = axp288_charger_usb_set_property,
.property_is_writeable = axp288_charger_property_is_writeable,
};
static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
{
struct axp288_chrg_info *info = dev;
int i;
for (i = 0; i < CHRG_INTR_END; i++) {
if (info->irq[i] == irq)
break;
}
if (i >= CHRG_INTR_END) {
dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
return IRQ_NONE;
}
switch (i) {
case VBUS_OV_IRQ:
dev_dbg(&info->pdev->dev, "VBUS Over Voltage INTR\n");
break;
case CHARGE_DONE_IRQ:
dev_dbg(&info->pdev->dev, "Charging Done INTR\n");
break;
case CHARGE_CHARGING_IRQ:
dev_dbg(&info->pdev->dev, "Start Charging IRQ\n");
break;
case BAT_SAFE_QUIT_IRQ:
dev_dbg(&info->pdev->dev,
"Quit Safe Mode(restart timer) Charging IRQ\n");
break;
case BAT_SAFE_ENTER_IRQ:
dev_dbg(&info->pdev->dev,
"Enter Safe Mode(timer expire) Charging IRQ\n");
break;
case QCBTU_IRQ:
dev_dbg(&info->pdev->dev,
"Quit Battery Under Temperature(CHRG) INTR\n");
break;
case CBTU_IRQ:
dev_dbg(&info->pdev->dev,
"Hit Battery Under Temperature(CHRG) INTR\n");
break;
case QCBTO_IRQ:
dev_dbg(&info->pdev->dev,
"Quit Battery Over Temperature(CHRG) INTR\n");
break;
case CBTO_IRQ:
dev_dbg(&info->pdev->dev,
"Hit Battery Over Temperature(CHRG) INTR\n");
break;
default:
dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
goto out;
}
mutex_lock(&info->lock);
info->valid = false;
mutex_unlock(&info->lock);
power_supply_changed(info->psy_usb);
out:
return IRQ_HANDLED;
}
/*
* The HP Pavilion x2 10 series comes in a number of variants:
* Bay Trail SoC + AXP288 PMIC, Micro-USB, DMI_BOARD_NAME: "8021"
* Bay Trail SoC + AXP288 PMIC, Type-C, DMI_BOARD_NAME: "815D"
* Cherry Trail SoC + AXP288 PMIC, Type-C, DMI_BOARD_NAME: "813E"
* Cherry Trail SoC + TI PMIC, Type-C, DMI_BOARD_NAME: "827C" or "82F4"
*
* The variants with the AXP288 + Type-C connector are all kinds of special:
*
* 1. They use a Type-C connector which the AXP288 does not support, so when
* using a Type-C charger it is not recognized. Unlike most AXP288 devices,
* this model actually has mostly working ACPI AC / Battery code, the ACPI code
* "solves" this by simply setting the input_current_limit to 3A.
* There are still some issues with the ACPI code, so we use this native driver,
* and to solve the charging not working (500mA is not enough) issue we hardcode
* the 3A input_current_limit like the ACPI code does.
*
* 2. If no charger is connected the machine boots with the vbus-path disabled.
* Normally this is done when a 5V boost converter is active to avoid the PMIC
* trying to charge from the 5V boost converter's output. This is done when
* an OTG host cable is inserted and the ID pin on the micro-B receptacle is
* pulled low and the ID pin has an ACPI event handler associated with it
* which re-enables the vbus-path when the ID pin is pulled high when the
* OTG host cable is removed. The Type-C connector has no ID pin, there is
* no ID pin handler and there appears to be no 5V boost converter, so we
* end up not charging because the vbus-path is disabled, until we unplug
* the charger which automatically clears the vbus-path disable bit and then
* on the second plug-in of the adapter we start charging. To solve the not
* charging on first charger plugin we unconditionally enable the vbus-path at
* probe on this model, which is safe since there is no 5V boost converter.
*/
static const struct dmi_system_id axp288_hp_x2_dmi_ids[] = {
{
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
DMI_EXACT_MATCH(DMI_BOARD_NAME, "815D"),
},
},
{
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
DMI_EXACT_MATCH(DMI_BOARD_NAME, "813E"),
},
},
{} /* Terminating entry */
};
static void axp288_charger_extcon_evt_worker(struct work_struct *work)
{
struct axp288_chrg_info *info =
container_of(work, struct axp288_chrg_info, cable.work);
int ret, current_limit;
struct extcon_dev *edev = info->cable.edev;
unsigned int val;
ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
if (ret < 0) {
dev_err(&info->pdev->dev, "Error reading status (%d)\n", ret);
return;
}
/* Offline? Disable charging and bail */
if (!(val & PS_STAT_VBUS_VALID)) {
dev_dbg(&info->pdev->dev, "USB charger disconnected\n");
axp288_charger_enable_charger(info, false);
mutex_lock(&info->lock);
info->valid = false;
mutex_unlock(&info->lock);
power_supply_changed(info->psy_usb);
return;
}
/* Determine cable/charger type */
if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
/* See comment above axp288_hp_x2_dmi_ids declaration */
dev_dbg(&info->pdev->dev, "HP X2 with Type-C, setting inlmt to 3A\n");
current_limit = 3000000;
} else if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
dev_dbg(&info->pdev->dev, "USB SDP charger is connected\n");
current_limit = 500000;
} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
dev_dbg(&info->pdev->dev, "USB CDP charger is connected\n");
current_limit = 1500000;
} else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
dev_dbg(&info->pdev->dev, "USB DCP charger is connected\n");
current_limit = 2000000;
} else {
/* Charger type detection still in progress, bail. */
return;
}
/* Set vbus current limit first, then enable charger */
ret = axp288_charger_set_vbus_inlmt(info, current_limit);
if (ret == 0)
axp288_charger_enable_charger(info, true);
else
dev_err(&info->pdev->dev,
"error setting current limit (%d)\n", ret);
mutex_lock(&info->lock);
info->valid = false;
mutex_unlock(&info->lock);
power_supply_changed(info->psy_usb);
}
static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
unsigned long event, void *param)
{
struct axp288_chrg_info *info =
container_of(nb, struct axp288_chrg_info, cable.nb);
schedule_work(&info->cable.work);
return NOTIFY_OK;
}
static void axp288_charger_otg_evt_worker(struct work_struct *work)
{
struct axp288_chrg_info *info =
container_of(work, struct axp288_chrg_info, otg.work);
struct extcon_dev *edev = info->otg.cable;
int ret, usb_host = extcon_get_state(edev, EXTCON_USB_HOST);
dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
usb_host ? "attached" : "detached");
/*
* Set usb_id_short flag to avoid running charger detection logic
* in case usb host.
*/
info->otg.id_short = usb_host;
/* Disable VBUS path before enabling the 5V boost */
ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
if (ret < 0)
dev_warn(&info->pdev->dev, "vbus path disable failed\n");
}
static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
unsigned long event, void *param)
{
struct axp288_chrg_info *info =
container_of(nb, struct axp288_chrg_info, otg.id_nb);
schedule_work(&info->otg.work);
return NOTIFY_OK;
}
static int charger_init_hw_regs(struct axp288_chrg_info *info)
{
int ret, cc, cv;
unsigned int val;
/* Program temperature thresholds */
ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_V_LTF_CHRG, ret);
return ret;
}
ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_V_HTF_CHRG, ret);
return ret;
}
/* Do not turn-off charger o/p after charge cycle ends */
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL2,
CNTL2_CHG_OUT_TURNON, CNTL2_CHG_OUT_TURNON);
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CHRG_CTRL2, ret);
return ret;
}
/* Setup ending condition for charging to be 10% of I(chrg) */
ret = regmap_update_bits(info->regmap,
AXP20X_CHRG_CTRL1,
CHRG_CCCV_ITERM_20P, 0);
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CHRG_CTRL1, ret);
return ret;
}
/* Disable OCV-SOC curve calibration */
ret = regmap_update_bits(info->regmap,
AXP20X_CC_CTRL,
FG_CNTL_OCV_ADJ_EN, 0);
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_CC_CTRL, ret);
return ret;
}
if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
/* See comment above axp288_hp_x2_dmi_ids declaration */
ret = axp288_charger_vbus_path_select(info, true);
if (ret < 0)
return ret;
} else {
/* Set Vhold to the factory default / recommended 4.4V */
val = VBUS_ISPOUT_VHOLD_SET_4400MV << VBUS_ISPOUT_VHOLD_SET_BIT_POS;
ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
VBUS_ISPOUT_VHOLD_SET_MASK, val);
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
AXP20X_VBUS_IPSOUT_MGMT, ret);
return ret;
}
}
/* Read current charge voltage and current limit */
ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
if (ret < 0) {
dev_err(&info->pdev->dev, "register(%x) read error(%d)\n",
AXP20X_CHRG_CTRL1, ret);
return ret;
}
/* Determine charge voltage */
cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
switch (cv) {
case CHRG_CCCV_CV_4100MV:
info->cv = CV_4100MV;
break;
case CHRG_CCCV_CV_4150MV:
info->cv = CV_4150MV;
break;
case CHRG_CCCV_CV_4200MV:
info->cv = CV_4200MV;
break;
case CHRG_CCCV_CV_4350MV:
info->cv = CV_4350MV;
break;
}
/* Determine charge current limit */
cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
info->cc = cc;
/*
* Do not allow the user to configure higher settings then those
* set by the firmware
*/
info->max_cv = info->cv;
info->max_cc = info->cc;
return 0;
}
static void axp288_charger_cancel_work(void *data)
{
struct axp288_chrg_info *info = data;
cancel_work_sync(&info->otg.work);
cancel_work_sync(&info->cable.work);
}
static int axp288_charger_probe(struct platform_device *pdev)
{
int ret, i, pirq;
struct axp288_chrg_info *info;
struct device *dev = &pdev->dev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
struct power_supply_config charger_cfg = {};
const char *extcon_name = NULL;
unsigned int val;
/*
* Normally the native AXP288 fg/charger drivers are preferred but
* on some devices the ACPI drivers should be used instead.
*/
if (!acpi_quirk_skip_acpi_ac_and_battery())
return -ENODEV;
/*
* On some devices the fuelgauge and charger parts of the axp288 are
* not used, check that the fuelgauge is enabled (CC_CTRL != 0).
*/
ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val);
if (ret < 0)
return ret;
if (val == 0)
return -ENODEV;
info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
mutex_init(&info->lock);
info->pdev = pdev;
info->regmap = axp20x->regmap;
info->regmap_irqc = axp20x->regmap_irqc;
info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
if (IS_ERR(info->cable.edev)) {
dev_err_probe(dev, PTR_ERR(info->cable.edev),
"extcon_get_extcon_dev(%s) failed\n",
AXP288_EXTCON_DEV_NAME);
return PTR_ERR(info->cable.edev);
}
/*
* On devices with broken ACPI GPIO event handlers there also is no ACPI
* "INT3496" (USB_HOST_EXTCON_HID) device. x86-android-tablets.ko
* instantiates an "intel-int3496" extcon on these devs as a workaround.
*/
if (acpi_quirk_skip_gpio_event_handlers())
extcon_name = "intel-int3496";
else if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1))
extcon_name = USB_HOST_EXTCON_NAME;
if (extcon_name) {
info->otg.cable = extcon_get_extcon_dev(extcon_name);
if (IS_ERR(info->otg.cable)) {
dev_err_probe(dev, PTR_ERR(info->otg.cable),
"extcon_get_extcon_dev(%s) failed\n",
USB_HOST_EXTCON_NAME);
return PTR_ERR(info->otg.cable);
}
dev_info(dev, "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
}
platform_set_drvdata(pdev, info);
ret = charger_init_hw_regs(info);
if (ret)
return ret;
/* Register with power supply class */
charger_cfg.drv_data = info;
info->psy_usb = devm_power_supply_register(dev, &axp288_charger_desc,
&charger_cfg);
if (IS_ERR(info->psy_usb)) {
ret = PTR_ERR(info->psy_usb);
dev_err(dev, "failed to register power supply: %d\n", ret);
return ret;
}
/* Cancel our work on cleanup, register this before the notifiers */
ret = devm_add_action(dev, axp288_charger_cancel_work, info);
if (ret)
return ret;
/* Register for extcon notification */
INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
ret = devm_extcon_register_notifier_all(dev, info->cable.edev,
&info->cable.nb);
if (ret) {
dev_err(dev, "failed to register cable extcon notifier\n");
return ret;
}
schedule_work(&info->cable.work);
/* Register for OTG notification */
INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
if (info->otg.cable) {
ret = devm_extcon_register_notifier(dev, info->otg.cable,
EXTCON_USB_HOST, &info->otg.id_nb);
if (ret) {
dev_err(dev, "failed to register EXTCON_USB_HOST notifier\n");
return ret;
}
schedule_work(&info->otg.work);
}
/* Register charger interrupts */
for (i = 0; i < CHRG_INTR_END; i++) {
pirq = platform_get_irq(info->pdev, i);
if (pirq < 0)
return pirq;
info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
if (info->irq[i] < 0) {
dev_warn(&info->pdev->dev,
"failed to get virtual interrupt=%d\n", pirq);
return info->irq[i];
}
ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
NULL, axp288_charger_irq_thread_handler,
IRQF_ONESHOT, info->pdev->name, info);
if (ret) {
dev_err(dev, "failed to request interrupt=%d\n",
info->irq[i]);
return ret;
}
}
return 0;
}
static const struct platform_device_id axp288_charger_id_table[] = {
{ .name = "axp288_charger" },
{},
};
MODULE_DEVICE_TABLE(platform, axp288_charger_id_table);
static struct platform_driver axp288_charger_driver = {
.probe = axp288_charger_probe,
.id_table = axp288_charger_id_table,
.driver = {
.name = "axp288_charger",
},
};
module_platform_driver(axp288_charger_driver);
MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
MODULE_DESCRIPTION("X-power AXP288 Charger Driver");
MODULE_LICENSE("GPL v2");