290 lines
7.5 KiB
C
290 lines
7.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
|
|
enum {
|
|
RTQ6752_IDX_PAVDD = 0,
|
|
RTQ6752_IDX_NAVDD = 1,
|
|
RTQ6752_IDX_MAX
|
|
};
|
|
|
|
#define RTQ6752_REG_PAVDD 0x00
|
|
#define RTQ6752_REG_NAVDD 0x01
|
|
#define RTQ6752_REG_PAVDDONDLY 0x07
|
|
#define RTQ6752_REG_PAVDDSSTIME 0x08
|
|
#define RTQ6752_REG_NAVDDONDLY 0x0D
|
|
#define RTQ6752_REG_NAVDDSSTIME 0x0E
|
|
#define RTQ6752_REG_OPTION1 0x12
|
|
#define RTQ6752_REG_CHSWITCH 0x16
|
|
#define RTQ6752_REG_FAULT 0x1D
|
|
|
|
#define RTQ6752_VOUT_MASK GENMASK(5, 0)
|
|
#define RTQ6752_NAVDDEN_MASK BIT(3)
|
|
#define RTQ6752_PAVDDEN_MASK BIT(0)
|
|
#define RTQ6752_PAVDDAD_MASK BIT(4)
|
|
#define RTQ6752_NAVDDAD_MASK BIT(3)
|
|
#define RTQ6752_PAVDDF_MASK BIT(3)
|
|
#define RTQ6752_NAVDDF_MASK BIT(0)
|
|
#define RTQ6752_ENABLE_MASK (BIT(RTQ6752_IDX_MAX) - 1)
|
|
|
|
#define RTQ6752_VOUT_MINUV 5000000
|
|
#define RTQ6752_VOUT_STEPUV 50000
|
|
#define RTQ6752_VOUT_NUM 47
|
|
#define RTQ6752_I2CRDY_TIMEUS 1000
|
|
#define RTQ6752_MINSS_TIMEUS 5000
|
|
|
|
struct rtq6752_priv {
|
|
struct regmap *regmap;
|
|
struct gpio_desc *enable_gpio;
|
|
struct mutex lock;
|
|
unsigned char enable_flag;
|
|
};
|
|
|
|
static int rtq6752_set_vdd_enable(struct regulator_dev *rdev)
|
|
{
|
|
struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
|
|
int rid = rdev_get_id(rdev), ret;
|
|
|
|
mutex_lock(&priv->lock);
|
|
if (priv->enable_gpio) {
|
|
gpiod_set_value(priv->enable_gpio, 1);
|
|
|
|
usleep_range(RTQ6752_I2CRDY_TIMEUS,
|
|
RTQ6752_I2CRDY_TIMEUS + 100);
|
|
}
|
|
|
|
if (!priv->enable_flag) {
|
|
regcache_cache_only(priv->regmap, false);
|
|
ret = regcache_sync(priv->regmap);
|
|
if (ret) {
|
|
mutex_unlock(&priv->lock);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
priv->enable_flag |= BIT(rid);
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return regulator_enable_regmap(rdev);
|
|
}
|
|
|
|
static int rtq6752_set_vdd_disable(struct regulator_dev *rdev)
|
|
{
|
|
struct rtq6752_priv *priv = rdev_get_drvdata(rdev);
|
|
int rid = rdev_get_id(rdev), ret;
|
|
|
|
ret = regulator_disable_regmap(rdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&priv->lock);
|
|
priv->enable_flag &= ~BIT(rid);
|
|
|
|
if (!priv->enable_flag) {
|
|
regcache_cache_only(priv->regmap, true);
|
|
regcache_mark_dirty(priv->regmap);
|
|
}
|
|
|
|
if (priv->enable_gpio)
|
|
gpiod_set_value(priv->enable_gpio, 0);
|
|
|
|
mutex_unlock(&priv->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int rtq6752_get_error_flags(struct regulator_dev *rdev,
|
|
unsigned int *flags)
|
|
{
|
|
unsigned int val, events = 0;
|
|
const unsigned int fault_mask[] = {
|
|
RTQ6752_PAVDDF_MASK, RTQ6752_NAVDDF_MASK };
|
|
int rid = rdev_get_id(rdev), ret;
|
|
|
|
ret = regmap_read(rdev->regmap, RTQ6752_REG_FAULT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (val & fault_mask[rid])
|
|
events = REGULATOR_ERROR_REGULATION_OUT;
|
|
|
|
*flags = events;
|
|
return 0;
|
|
}
|
|
|
|
static const struct regulator_ops rtq6752_regulator_ops = {
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
.enable = rtq6752_set_vdd_enable,
|
|
.disable = rtq6752_set_vdd_disable,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
.set_active_discharge = regulator_set_active_discharge_regmap,
|
|
.get_error_flags = rtq6752_get_error_flags,
|
|
};
|
|
|
|
static const struct regulator_desc rtq6752_regulator_descs[] = {
|
|
{
|
|
.name = "rtq6752-pavdd",
|
|
.of_match = of_match_ptr("pavdd"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RTQ6752_IDX_PAVDD,
|
|
.n_voltages = RTQ6752_VOUT_NUM,
|
|
.ops = &rtq6752_regulator_ops,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = RTQ6752_VOUT_MINUV,
|
|
.uV_step = RTQ6752_VOUT_STEPUV,
|
|
.enable_time = RTQ6752_MINSS_TIMEUS,
|
|
.vsel_reg = RTQ6752_REG_PAVDD,
|
|
.vsel_mask = RTQ6752_VOUT_MASK,
|
|
.enable_reg = RTQ6752_REG_CHSWITCH,
|
|
.enable_mask = RTQ6752_PAVDDEN_MASK,
|
|
.active_discharge_reg = RTQ6752_REG_OPTION1,
|
|
.active_discharge_mask = RTQ6752_PAVDDAD_MASK,
|
|
.active_discharge_off = RTQ6752_PAVDDAD_MASK,
|
|
},
|
|
{
|
|
.name = "rtq6752-navdd",
|
|
.of_match = of_match_ptr("navdd"),
|
|
.regulators_node = of_match_ptr("regulators"),
|
|
.id = RTQ6752_IDX_NAVDD,
|
|
.n_voltages = RTQ6752_VOUT_NUM,
|
|
.ops = &rtq6752_regulator_ops,
|
|
.owner = THIS_MODULE,
|
|
.min_uV = RTQ6752_VOUT_MINUV,
|
|
.uV_step = RTQ6752_VOUT_STEPUV,
|
|
.enable_time = RTQ6752_MINSS_TIMEUS,
|
|
.vsel_reg = RTQ6752_REG_NAVDD,
|
|
.vsel_mask = RTQ6752_VOUT_MASK,
|
|
.enable_reg = RTQ6752_REG_CHSWITCH,
|
|
.enable_mask = RTQ6752_NAVDDEN_MASK,
|
|
.active_discharge_reg = RTQ6752_REG_OPTION1,
|
|
.active_discharge_mask = RTQ6752_NAVDDAD_MASK,
|
|
.active_discharge_off = RTQ6752_NAVDDAD_MASK,
|
|
}
|
|
};
|
|
|
|
static int rtq6752_init_device_properties(struct rtq6752_priv *priv)
|
|
{
|
|
u8 raw_vals[] = { 0, 0 };
|
|
int ret;
|
|
|
|
/* Configure PAVDD on and softstart delay time to the minimum */
|
|
ret = regmap_raw_write(priv->regmap, RTQ6752_REG_PAVDDONDLY, raw_vals,
|
|
ARRAY_SIZE(raw_vals));
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Configure NAVDD on and softstart delay time to the minimum */
|
|
return regmap_raw_write(priv->regmap, RTQ6752_REG_NAVDDONDLY, raw_vals,
|
|
ARRAY_SIZE(raw_vals));
|
|
}
|
|
|
|
static bool rtq6752_is_volatile_reg(struct device *dev, unsigned int reg)
|
|
{
|
|
if (reg == RTQ6752_REG_FAULT)
|
|
return true;
|
|
return false;
|
|
}
|
|
|
|
static const struct reg_default rtq6752_reg_defaults[] = {
|
|
{ RTQ6752_REG_PAVDD, 0x14 },
|
|
{ RTQ6752_REG_NAVDD, 0x14 },
|
|
{ RTQ6752_REG_PAVDDONDLY, 0x01 },
|
|
{ RTQ6752_REG_PAVDDSSTIME, 0x01 },
|
|
{ RTQ6752_REG_NAVDDONDLY, 0x01 },
|
|
{ RTQ6752_REG_NAVDDSSTIME, 0x01 },
|
|
{ RTQ6752_REG_OPTION1, 0x07 },
|
|
{ RTQ6752_REG_CHSWITCH, 0x29 },
|
|
};
|
|
|
|
static const struct regmap_config rtq6752_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
.max_register = RTQ6752_REG_FAULT,
|
|
.reg_defaults = rtq6752_reg_defaults,
|
|
.num_reg_defaults = ARRAY_SIZE(rtq6752_reg_defaults),
|
|
.volatile_reg = rtq6752_is_volatile_reg,
|
|
};
|
|
|
|
static int rtq6752_probe(struct i2c_client *i2c)
|
|
{
|
|
struct rtq6752_priv *priv;
|
|
struct regulator_config reg_cfg = {};
|
|
struct regulator_dev *rdev;
|
|
int i, ret;
|
|
|
|
priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&priv->lock);
|
|
|
|
priv->enable_gpio = devm_gpiod_get_optional(&i2c->dev, "enable",
|
|
GPIOD_OUT_HIGH);
|
|
if (IS_ERR(priv->enable_gpio)) {
|
|
dev_err(&i2c->dev, "Failed to get 'enable' gpio\n");
|
|
return PTR_ERR(priv->enable_gpio);
|
|
}
|
|
|
|
usleep_range(RTQ6752_I2CRDY_TIMEUS, RTQ6752_I2CRDY_TIMEUS + 100);
|
|
/* Default EN pin to high, PAVDD and NAVDD will be on */
|
|
priv->enable_flag = RTQ6752_ENABLE_MASK;
|
|
|
|
priv->regmap = devm_regmap_init_i2c(i2c, &rtq6752_regmap_config);
|
|
if (IS_ERR(priv->regmap)) {
|
|
dev_err(&i2c->dev, "Failed to init regmap\n");
|
|
return PTR_ERR(priv->regmap);
|
|
}
|
|
|
|
ret = rtq6752_init_device_properties(priv);
|
|
if (ret) {
|
|
dev_err(&i2c->dev, "Failed to init device properties\n");
|
|
return ret;
|
|
}
|
|
|
|
reg_cfg.dev = &i2c->dev;
|
|
reg_cfg.regmap = priv->regmap;
|
|
reg_cfg.driver_data = priv;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(rtq6752_regulator_descs); i++) {
|
|
rdev = devm_regulator_register(&i2c->dev,
|
|
rtq6752_regulator_descs + i,
|
|
®_cfg);
|
|
if (IS_ERR(rdev)) {
|
|
dev_err(&i2c->dev, "Failed to init %d regulator\n", i);
|
|
return PTR_ERR(rdev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id __maybe_unused rtq6752_device_table[] = {
|
|
{ .compatible = "richtek,rtq6752", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, rtq6752_device_table);
|
|
|
|
static struct i2c_driver rtq6752_driver = {
|
|
.driver = {
|
|
.name = "rtq6752",
|
|
.of_match_table = rtq6752_device_table,
|
|
},
|
|
.probe_new = rtq6752_probe,
|
|
};
|
|
module_i2c_driver(rtq6752_driver);
|
|
|
|
MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
|
|
MODULE_DESCRIPTION("Richtek RTQ6752 Regulator Driver");
|
|
MODULE_LICENSE("GPL v2");
|