265 lines
7.9 KiB
C
265 lines
7.9 KiB
C
/*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*
|
|
* Copyright (C) 2011 Thomas Langer <thomas.langer@lantiq.com>
|
|
* Copyright (C) 2011 John Crispin <blogic@openwrt.org>
|
|
*/
|
|
|
|
#include <linux/ioport.h>
|
|
#include <linux/export.h>
|
|
#include <linux/clkdev.h>
|
|
#include <linux/of_address.h>
|
|
#include <asm/delay.h>
|
|
|
|
#include <lantiq_soc.h>
|
|
|
|
#include "../clk.h"
|
|
|
|
/* infrastructure control register */
|
|
#define SYS1_INFRAC 0x00bc
|
|
/* Configuration fuses for drivers and pll */
|
|
#define STATUS_CONFIG 0x0040
|
|
|
|
/* GPE frequency selection */
|
|
#define GPPC_OFFSET 24
|
|
#define GPEFREQ_MASK 0x00000C0
|
|
#define GPEFREQ_OFFSET 10
|
|
/* Clock status register */
|
|
#define SYSCTL_CLKS 0x0000
|
|
/* Clock enable register */
|
|
#define SYSCTL_CLKEN 0x0004
|
|
/* Clock clear register */
|
|
#define SYSCTL_CLKCLR 0x0008
|
|
/* Activation Status Register */
|
|
#define SYSCTL_ACTS 0x0020
|
|
/* Activation Register */
|
|
#define SYSCTL_ACT 0x0024
|
|
/* Deactivation Register */
|
|
#define SYSCTL_DEACT 0x0028
|
|
/* reboot Register */
|
|
#define SYSCTL_RBT 0x002c
|
|
/* CPU0 Clock Control Register */
|
|
#define SYS1_CPU0CC 0x0040
|
|
/* HRST_OUT_N Control Register */
|
|
#define SYS1_HRSTOUTC 0x00c0
|
|
/* clock divider bit */
|
|
#define CPU0CC_CPUDIV 0x0001
|
|
|
|
/* Activation Status Register */
|
|
#define ACTS_ASC0_ACT 0x00001000
|
|
#define ACTS_ASC1_ACT 0x00000800
|
|
#define ACTS_I2C_ACT 0x00004000
|
|
#define ACTS_P0 0x00010000
|
|
#define ACTS_P1 0x00010000
|
|
#define ACTS_P2 0x00020000
|
|
#define ACTS_P3 0x00020000
|
|
#define ACTS_P4 0x00040000
|
|
#define ACTS_PADCTRL0 0x00100000
|
|
#define ACTS_PADCTRL1 0x00100000
|
|
#define ACTS_PADCTRL2 0x00200000
|
|
#define ACTS_PADCTRL3 0x00200000
|
|
#define ACTS_PADCTRL4 0x00400000
|
|
|
|
#define sysctl_w32(m, x, y) ltq_w32((x), sysctl_membase[m] + (y))
|
|
#define sysctl_r32(m, x) ltq_r32(sysctl_membase[m] + (x))
|
|
#define sysctl_w32_mask(m, clear, set, reg) \
|
|
sysctl_w32(m, (sysctl_r32(m, reg) & ~(clear)) | (set), reg)
|
|
|
|
#define status_w32(x, y) ltq_w32((x), status_membase + (y))
|
|
#define status_r32(x) ltq_r32(status_membase + (x))
|
|
|
|
static void __iomem *sysctl_membase[3], *status_membase;
|
|
void __iomem *ltq_sys1_membase, *ltq_ebu_membase;
|
|
|
|
void falcon_trigger_hrst(int level)
|
|
{
|
|
sysctl_w32(SYSCTL_SYS1, level & 1, SYS1_HRSTOUTC);
|
|
}
|
|
|
|
static inline void sysctl_wait(struct clk *clk,
|
|
unsigned int test, unsigned int reg)
|
|
{
|
|
int err = 1000000;
|
|
|
|
do {} while (--err && ((sysctl_r32(clk->module, reg)
|
|
& clk->bits) != test));
|
|
if (!err)
|
|
pr_err("module de/activation failed %d %08X %08X %08X\n",
|
|
clk->module, clk->bits, test,
|
|
sysctl_r32(clk->module, reg) & clk->bits);
|
|
}
|
|
|
|
static int sysctl_activate(struct clk *clk)
|
|
{
|
|
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
|
|
sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
|
|
sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
|
|
return 0;
|
|
}
|
|
|
|
static void sysctl_deactivate(struct clk *clk)
|
|
{
|
|
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
|
|
sysctl_w32(clk->module, clk->bits, SYSCTL_DEACT);
|
|
sysctl_wait(clk, 0, SYSCTL_ACTS);
|
|
}
|
|
|
|
static int sysctl_clken(struct clk *clk)
|
|
{
|
|
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKEN);
|
|
sysctl_w32(clk->module, clk->bits, SYSCTL_ACT);
|
|
sysctl_wait(clk, clk->bits, SYSCTL_CLKS);
|
|
return 0;
|
|
}
|
|
|
|
static void sysctl_clkdis(struct clk *clk)
|
|
{
|
|
sysctl_w32(clk->module, clk->bits, SYSCTL_CLKCLR);
|
|
sysctl_wait(clk, 0, SYSCTL_CLKS);
|
|
}
|
|
|
|
static void sysctl_reboot(struct clk *clk)
|
|
{
|
|
unsigned int act;
|
|
unsigned int bits;
|
|
|
|
act = sysctl_r32(clk->module, SYSCTL_ACT);
|
|
bits = ~act & clk->bits;
|
|
if (bits != 0) {
|
|
sysctl_w32(clk->module, bits, SYSCTL_CLKEN);
|
|
sysctl_w32(clk->module, bits, SYSCTL_ACT);
|
|
sysctl_wait(clk, bits, SYSCTL_ACTS);
|
|
}
|
|
sysctl_w32(clk->module, act & clk->bits, SYSCTL_RBT);
|
|
sysctl_wait(clk, clk->bits, SYSCTL_ACTS);
|
|
}
|
|
|
|
/* enable the ONU core */
|
|
static void falcon_gpe_enable(void)
|
|
{
|
|
unsigned int freq;
|
|
unsigned int status;
|
|
|
|
/* if if the clock is already enabled */
|
|
status = sysctl_r32(SYSCTL_SYS1, SYS1_INFRAC);
|
|
if (status & (1 << (GPPC_OFFSET + 1)))
|
|
return;
|
|
|
|
if (status_r32(STATUS_CONFIG) == 0)
|
|
freq = 1; /* use 625MHz on unfused chip */
|
|
else
|
|
freq = (status_r32(STATUS_CONFIG) &
|
|
GPEFREQ_MASK) >>
|
|
GPEFREQ_OFFSET;
|
|
|
|
/* apply new frequency */
|
|
sysctl_w32_mask(SYSCTL_SYS1, 7 << (GPPC_OFFSET + 1),
|
|
freq << (GPPC_OFFSET + 2) , SYS1_INFRAC);
|
|
udelay(1);
|
|
|
|
/* enable new frequency */
|
|
sysctl_w32_mask(SYSCTL_SYS1, 0, 1 << (GPPC_OFFSET + 1), SYS1_INFRAC);
|
|
udelay(1);
|
|
}
|
|
|
|
static inline void clkdev_add_sys(const char *dev, unsigned int module,
|
|
unsigned int bits)
|
|
{
|
|
struct clk *clk = kzalloc(sizeof(struct clk), GFP_KERNEL);
|
|
|
|
clk->cl.dev_id = dev;
|
|
clk->cl.con_id = NULL;
|
|
clk->cl.clk = clk;
|
|
clk->module = module;
|
|
clk->bits = bits;
|
|
clk->activate = sysctl_activate;
|
|
clk->deactivate = sysctl_deactivate;
|
|
clk->enable = sysctl_clken;
|
|
clk->disable = sysctl_clkdis;
|
|
clk->reboot = sysctl_reboot;
|
|
clkdev_add(&clk->cl);
|
|
}
|
|
|
|
void __init ltq_soc_init(void)
|
|
{
|
|
struct device_node *np_status =
|
|
of_find_compatible_node(NULL, NULL, "lantiq,status-falcon");
|
|
struct device_node *np_ebu =
|
|
of_find_compatible_node(NULL, NULL, "lantiq,ebu-falcon");
|
|
struct device_node *np_sys1 =
|
|
of_find_compatible_node(NULL, NULL, "lantiq,sys1-falcon");
|
|
struct device_node *np_syseth =
|
|
of_find_compatible_node(NULL, NULL, "lantiq,syseth-falcon");
|
|
struct device_node *np_sysgpe =
|
|
of_find_compatible_node(NULL, NULL, "lantiq,sysgpe-falcon");
|
|
struct resource res_status, res_ebu, res_sys[3];
|
|
int i;
|
|
|
|
/* check if all the core register ranges are available */
|
|
if (!np_status || !np_ebu || !np_sys1 || !np_syseth || !np_sysgpe)
|
|
panic("Failed to load core nodes from devicetree");
|
|
|
|
if (of_address_to_resource(np_status, 0, &res_status) ||
|
|
of_address_to_resource(np_ebu, 0, &res_ebu) ||
|
|
of_address_to_resource(np_sys1, 0, &res_sys[0]) ||
|
|
of_address_to_resource(np_syseth, 0, &res_sys[1]) ||
|
|
of_address_to_resource(np_sysgpe, 0, &res_sys[2]))
|
|
panic("Failed to get core resources");
|
|
|
|
if ((request_mem_region(res_status.start, resource_size(&res_status),
|
|
res_status.name) < 0) ||
|
|
(request_mem_region(res_ebu.start, resource_size(&res_ebu),
|
|
res_ebu.name) < 0) ||
|
|
(request_mem_region(res_sys[0].start,
|
|
resource_size(&res_sys[0]),
|
|
res_sys[0].name) < 0) ||
|
|
(request_mem_region(res_sys[1].start,
|
|
resource_size(&res_sys[1]),
|
|
res_sys[1].name) < 0) ||
|
|
(request_mem_region(res_sys[2].start,
|
|
resource_size(&res_sys[2]),
|
|
res_sys[2].name) < 0))
|
|
pr_err("Failed to request core resources");
|
|
|
|
status_membase = ioremap_nocache(res_status.start,
|
|
resource_size(&res_status));
|
|
ltq_ebu_membase = ioremap_nocache(res_ebu.start,
|
|
resource_size(&res_ebu));
|
|
|
|
if (!status_membase || !ltq_ebu_membase)
|
|
panic("Failed to remap core resources");
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
sysctl_membase[i] = ioremap_nocache(res_sys[i].start,
|
|
resource_size(&res_sys[i]));
|
|
if (!sysctl_membase[i])
|
|
panic("Failed to remap sysctrl resources");
|
|
}
|
|
ltq_sys1_membase = sysctl_membase[0];
|
|
|
|
falcon_gpe_enable();
|
|
|
|
/* get our 3 static rates for cpu, fpi and io clocks */
|
|
if (ltq_sys1_r32(SYS1_CPU0CC) & CPU0CC_CPUDIV)
|
|
clkdev_add_static(CLOCK_200M, CLOCK_100M, CLOCK_200M, 0);
|
|
else
|
|
clkdev_add_static(CLOCK_400M, CLOCK_100M, CLOCK_200M, 0);
|
|
|
|
/* add our clock domains */
|
|
clkdev_add_sys("1d810000.gpio", SYSCTL_SYSETH, ACTS_P0);
|
|
clkdev_add_sys("1d810100.gpio", SYSCTL_SYSETH, ACTS_P2);
|
|
clkdev_add_sys("1e800100.gpio", SYSCTL_SYS1, ACTS_P1);
|
|
clkdev_add_sys("1e800200.gpio", SYSCTL_SYS1, ACTS_P3);
|
|
clkdev_add_sys("1e800300.gpio", SYSCTL_SYS1, ACTS_P4);
|
|
clkdev_add_sys("1db01000.pad", SYSCTL_SYSETH, ACTS_PADCTRL0);
|
|
clkdev_add_sys("1db02000.pad", SYSCTL_SYSETH, ACTS_PADCTRL2);
|
|
clkdev_add_sys("1e800400.pad", SYSCTL_SYS1, ACTS_PADCTRL1);
|
|
clkdev_add_sys("1e800500.pad", SYSCTL_SYS1, ACTS_PADCTRL3);
|
|
clkdev_add_sys("1e800600.pad", SYSCTL_SYS1, ACTS_PADCTRL4);
|
|
clkdev_add_sys("1e100b00.serial", SYSCTL_SYS1, ACTS_ASC1_ACT);
|
|
clkdev_add_sys("1e100c00.serial", SYSCTL_SYS1, ACTS_ASC0_ACT);
|
|
clkdev_add_sys("1e200000.i2c", SYSCTL_SYS1, ACTS_I2C_ACT);
|
|
}
|