OpenCloudOS-Kernel/drivers/gpu/drm/arm/malidp_hw.h

357 lines
9.1 KiB
C

/*
*
* (C) COPYRIGHT 2013-2016 ARM Limited. All rights reserved.
*
* This program is free software and is provided to you under the terms of the
* GNU General Public License version 2 as published by the Free Software
* Foundation, and any use by you of this program is subject to the terms
* of such GNU licence.
*
* ARM Mali DP hardware manipulation routines.
*/
#ifndef __MALIDP_HW_H__
#define __MALIDP_HW_H__
#include <linux/bitops.h>
#include "malidp_regs.h"
struct videomode;
struct clk;
/* Mali DP IP blocks */
enum {
MALIDP_DE_BLOCK = 0,
MALIDP_SE_BLOCK,
MALIDP_DC_BLOCK
};
/* Mali DP layer IDs */
enum {
DE_VIDEO1 = BIT(0),
DE_GRAPHICS1 = BIT(1),
DE_GRAPHICS2 = BIT(2), /* used only in DP500 */
DE_VIDEO2 = BIT(3),
DE_SMART = BIT(4),
};
struct malidp_format_id {
u32 format; /* DRM fourcc */
u8 layer; /* bitmask of layers supporting it */
u8 id; /* used internally */
};
#define MALIDP_INVALID_FORMAT_ID 0xff
/*
* hide the differences between register maps
* by using a common structure to hold the
* base register offsets
*/
struct malidp_irq_map {
u32 irq_mask; /* mask of IRQs that can be enabled in the block */
u32 vsync_irq; /* IRQ bit used for signaling during VSYNC */
};
struct malidp_layer {
u16 id; /* layer ID */
u16 base; /* address offset for the register bank */
u16 ptr; /* address offset for the pointer register */
u16 stride_offset; /* offset to the first stride register. */
s16 yuv2rgb_offset; /* offset to the YUV->RGB matrix entries */
};
enum malidp_scaling_coeff_set {
MALIDP_UPSCALING_COEFFS = 1,
MALIDP_DOWNSCALING_1_5_COEFFS = 2,
MALIDP_DOWNSCALING_2_COEFFS = 3,
MALIDP_DOWNSCALING_2_75_COEFFS = 4,
MALIDP_DOWNSCALING_4_COEFFS = 5,
};
struct malidp_se_config {
u8 scale_enable : 1;
u8 enhancer_enable : 1;
u8 hcoeff : 3;
u8 vcoeff : 3;
u8 plane_src_id;
u16 input_w, input_h;
u16 output_w, output_h;
u32 h_init_phase, h_delta_phase;
u32 v_init_phase, v_delta_phase;
};
/* regmap features */
#define MALIDP_REGMAP_HAS_CLEARIRQ (1 << 0)
struct malidp_hw_regmap {
/* address offset of the DE register bank */
/* is always 0x0000 */
/* address offset of the DE coefficients registers */
const u16 coeffs_base;
/* address offset of the SE registers bank */
const u16 se_base;
/* address offset of the DC registers bank */
const u16 dc_base;
/* address offset for the output depth register */
const u16 out_depth_base;
/* bitmap with register map features */
const u8 features;
/* list of supported layers */
const u8 n_layers;
const struct malidp_layer *layers;
const struct malidp_irq_map de_irq_map;
const struct malidp_irq_map se_irq_map;
const struct malidp_irq_map dc_irq_map;
/* list of supported pixel formats for each layer */
const struct malidp_format_id *pixel_formats;
const u8 n_pixel_formats;
/* pitch alignment requirement in bytes */
const u8 bus_align_bytes;
};
/* device features */
/* Unlike DP550/650, DP500 has 3 stride registers in its video layer. */
#define MALIDP_DEVICE_LV_HAS_3_STRIDES BIT(0)
struct malidp_hw_device;
/*
* Static structure containing hardware specific data and pointers to
* functions that behave differently between various versions of the IP.
*/
struct malidp_hw {
const struct malidp_hw_regmap map;
/*
* Validate the driver instance against the hardware bits
*/
int (*query_hw)(struct malidp_hw_device *hwdev);
/*
* Set the hardware into config mode, ready to accept mode changes
*/
void (*enter_config_mode)(struct malidp_hw_device *hwdev);
/*
* Tell hardware to exit configuration mode
*/
void (*leave_config_mode)(struct malidp_hw_device *hwdev);
/*
* Query if hardware is in configuration mode
*/
bool (*in_config_mode)(struct malidp_hw_device *hwdev);
/*
* Set configuration valid flag for hardware parameters that can
* be changed outside the configuration mode. Hardware will use
* the new settings when config valid is set after the end of the
* current buffer scanout
*/
void (*set_config_valid)(struct malidp_hw_device *hwdev);
/*
* Set a new mode in hardware. Requires the hardware to be in
* configuration mode before this function is called.
*/
void (*modeset)(struct malidp_hw_device *hwdev, struct videomode *m);
/*
* Calculate the required rotation memory given the active area
* and the buffer format.
*/
int (*rotmem_required)(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt);
int (*se_set_scaling_coeffs)(struct malidp_hw_device *hwdev,
struct malidp_se_config *se_config,
struct malidp_se_config *old_config);
long (*se_calc_mclk)(struct malidp_hw_device *hwdev,
struct malidp_se_config *se_config,
struct videomode *vm);
u8 features;
};
/* Supported variants of the hardware */
enum {
MALIDP_500 = 0,
MALIDP_550,
MALIDP_650,
/* keep the next entry last */
MALIDP_MAX_DEVICES
};
extern const struct malidp_hw malidp_device[MALIDP_MAX_DEVICES];
/*
* Structure used by the driver during runtime operation.
*/
struct malidp_hw_device {
struct malidp_hw *hw;
void __iomem *regs;
/* APB clock */
struct clk *pclk;
/* AXI clock */
struct clk *aclk;
/* main clock for display core */
struct clk *mclk;
/* pixel clock for display core */
struct clk *pxlclk;
u8 min_line_size;
u16 max_line_size;
/* track the device PM state */
bool pm_suspended;
/* size of memory used for rotating layers, up to two banks available */
u32 rotation_memory[2];
};
static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
{
WARN_ON(hwdev->pm_suspended);
return readl(hwdev->regs + reg);
}
static inline void malidp_hw_write(struct malidp_hw_device *hwdev,
u32 value, u32 reg)
{
WARN_ON(hwdev->pm_suspended);
writel(value, hwdev->regs + reg);
}
static inline void malidp_hw_setbits(struct malidp_hw_device *hwdev,
u32 mask, u32 reg)
{
u32 data = malidp_hw_read(hwdev, reg);
data |= mask;
malidp_hw_write(hwdev, data, reg);
}
static inline void malidp_hw_clearbits(struct malidp_hw_device *hwdev,
u32 mask, u32 reg)
{
u32 data = malidp_hw_read(hwdev, reg);
data &= ~mask;
malidp_hw_write(hwdev, data, reg);
}
static inline u32 malidp_get_block_base(struct malidp_hw_device *hwdev,
u8 block)
{
switch (block) {
case MALIDP_SE_BLOCK:
return hwdev->hw->map.se_base;
case MALIDP_DC_BLOCK:
return hwdev->hw->map.dc_base;
}
return 0;
}
static inline void malidp_hw_disable_irq(struct malidp_hw_device *hwdev,
u8 block, u32 irq)
{
u32 base = malidp_get_block_base(hwdev, block);
malidp_hw_clearbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
}
static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,
u8 block, u32 irq)
{
u32 base = malidp_get_block_base(hwdev, block);
malidp_hw_setbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
}
int malidp_de_irq_init(struct drm_device *drm, int irq);
void malidp_de_irq_fini(struct drm_device *drm);
int malidp_se_irq_init(struct drm_device *drm, int irq);
void malidp_se_irq_fini(struct drm_device *drm);
u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
u8 layer_id, u32 format);
static inline u8 malidp_hw_get_pitch_align(struct malidp_hw_device *hwdev, bool rotated)
{
/*
* only hardware that cannot do 8 bytes bus alignments have further
* constraints on rotated planes
*/
if (hwdev->hw->map.bus_align_bytes == 8)
return 8;
else
return hwdev->hw->map.bus_align_bytes << (rotated ? 2 : 0);
}
/* U16.16 */
#define FP_1_00000 0x00010000 /* 1.0 */
#define FP_0_66667 0x0000AAAA /* 0.6667 = 1/1.5 */
#define FP_0_50000 0x00008000 /* 0.5 = 1/2 */
#define FP_0_36363 0x00005D17 /* 0.36363 = 1/2.75 */
#define FP_0_25000 0x00004000 /* 0.25 = 1/4 */
static inline enum malidp_scaling_coeff_set
malidp_se_select_coeffs(u32 upscale_factor)
{
return (upscale_factor >= FP_1_00000) ? MALIDP_UPSCALING_COEFFS :
(upscale_factor >= FP_0_66667) ? MALIDP_DOWNSCALING_1_5_COEFFS :
(upscale_factor >= FP_0_50000) ? MALIDP_DOWNSCALING_2_COEFFS :
(upscale_factor >= FP_0_36363) ? MALIDP_DOWNSCALING_2_75_COEFFS :
MALIDP_DOWNSCALING_4_COEFFS;
}
#undef FP_0_25000
#undef FP_0_36363
#undef FP_0_50000
#undef FP_0_66667
#undef FP_1_00000
static inline void malidp_se_set_enh_coeffs(struct malidp_hw_device *hwdev)
{
static const s32 enhancer_coeffs[] = {
-8, -8, -8, -8, 128, -8, -8, -8, -8
};
u32 val = MALIDP_SE_SET_ENH_LIMIT_LOW(MALIDP_SE_ENH_LOW_LEVEL) |
MALIDP_SE_SET_ENH_LIMIT_HIGH(MALIDP_SE_ENH_HIGH_LEVEL);
u32 image_enh = hwdev->hw->map.se_base +
((hwdev->hw->map.features & MALIDP_REGMAP_HAS_CLEARIRQ) ?
0x10 : 0xC) + MALIDP_SE_IMAGE_ENH;
u32 enh_coeffs = image_enh + MALIDP_SE_ENH_COEFF0;
int i;
malidp_hw_write(hwdev, val, image_enh);
for (i = 0; i < ARRAY_SIZE(enhancer_coeffs); ++i)
malidp_hw_write(hwdev, enhancer_coeffs[i], enh_coeffs + i * 4);
}
/*
* background color components are defined as 12bits values,
* they will be shifted right when stored on hardware that
* supports only 8bits per channel
*/
#define MALIDP_BGND_COLOR_R 0x000
#define MALIDP_BGND_COLOR_G 0x000
#define MALIDP_BGND_COLOR_B 0x000
#define MALIDP_COLORADJ_NUM_COEFFS 12
#define MALIDP_COEFFTAB_NUM_COEFFS 64
#define MALIDP_GAMMA_LUT_SIZE 4096
#endif /* __MALIDP_HW_H__ */