628 lines
15 KiB
C
628 lines
15 KiB
C
/*
|
|
* ***************************************************************************
|
|
* Marvell Armada-3700 Serial Driver
|
|
* Author: Wilson Ding <dingwei@marvell.com>
|
|
* Copyright (C) 2015 Marvell International Ltd.
|
|
* ***************************************************************************
|
|
* This program is free software: you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, either version 2 of the License, or any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
* ***************************************************************************
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/console.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
|
|
/* Register Map */
|
|
#define UART_RBR 0x00
|
|
#define RBR_BRK_DET BIT(15)
|
|
#define RBR_FRM_ERR_DET BIT(14)
|
|
#define RBR_PAR_ERR_DET BIT(13)
|
|
#define RBR_OVR_ERR_DET BIT(12)
|
|
|
|
#define UART_TSH 0x04
|
|
|
|
#define UART_CTRL 0x08
|
|
#define CTRL_SOFT_RST BIT(31)
|
|
#define CTRL_TXFIFO_RST BIT(15)
|
|
#define CTRL_RXFIFO_RST BIT(14)
|
|
#define CTRL_ST_MIRR_EN BIT(13)
|
|
#define CTRL_LPBK_EN BIT(12)
|
|
#define CTRL_SND_BRK_SEQ BIT(11)
|
|
#define CTRL_PAR_EN BIT(10)
|
|
#define CTRL_TWO_STOP BIT(9)
|
|
#define CTRL_TX_HFL_INT BIT(8)
|
|
#define CTRL_RX_HFL_INT BIT(7)
|
|
#define CTRL_TX_EMP_INT BIT(6)
|
|
#define CTRL_TX_RDY_INT BIT(5)
|
|
#define CTRL_RX_RDY_INT BIT(4)
|
|
#define CTRL_BRK_DET_INT BIT(3)
|
|
#define CTRL_FRM_ERR_INT BIT(2)
|
|
#define CTRL_PAR_ERR_INT BIT(1)
|
|
#define CTRL_OVR_ERR_INT BIT(0)
|
|
#define CTRL_RX_INT (CTRL_RX_RDY_INT | CTRL_BRK_DET_INT |\
|
|
CTRL_FRM_ERR_INT | CTRL_PAR_ERR_INT | CTRL_OVR_ERR_INT)
|
|
|
|
#define UART_STAT 0x0c
|
|
#define STAT_TX_FIFO_EMP BIT(13)
|
|
#define STAT_RX_FIFO_EMP BIT(12)
|
|
#define STAT_TX_FIFO_FUL BIT(11)
|
|
#define STAT_TX_FIFO_HFL BIT(10)
|
|
#define STAT_RX_TOGL BIT(9)
|
|
#define STAT_RX_FIFO_FUL BIT(8)
|
|
#define STAT_RX_FIFO_HFL BIT(7)
|
|
#define STAT_TX_EMP BIT(6)
|
|
#define STAT_TX_RDY BIT(5)
|
|
#define STAT_RX_RDY BIT(4)
|
|
#define STAT_BRK_DET BIT(3)
|
|
#define STAT_FRM_ERR BIT(2)
|
|
#define STAT_PAR_ERR BIT(1)
|
|
#define STAT_OVR_ERR BIT(0)
|
|
#define STAT_BRK_ERR (STAT_BRK_DET | STAT_FRM_ERR | STAT_FRM_ERR\
|
|
| STAT_PAR_ERR | STAT_OVR_ERR)
|
|
|
|
#define UART_BRDV 0x10
|
|
|
|
#define MVEBU_NR_UARTS 1
|
|
|
|
#define MVEBU_UART_TYPE "mvebu-uart"
|
|
|
|
static struct uart_port mvebu_uart_ports[MVEBU_NR_UARTS];
|
|
|
|
struct mvebu_uart_data {
|
|
struct uart_port *port;
|
|
struct clk *clk;
|
|
};
|
|
|
|
/* Core UART Driver Operations */
|
|
static unsigned int mvebu_uart_tx_empty(struct uart_port *port)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int st;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
st = readl(port->membase + UART_STAT);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
|
|
return (st & STAT_TX_FIFO_EMP) ? TIOCSER_TEMT : 0;
|
|
}
|
|
|
|
static unsigned int mvebu_uart_get_mctrl(struct uart_port *port)
|
|
{
|
|
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
|
|
}
|
|
|
|
static void mvebu_uart_set_mctrl(struct uart_port *port,
|
|
unsigned int mctrl)
|
|
{
|
|
/*
|
|
* Even if we do not support configuring the modem control lines, this
|
|
* function must be proided to the serial core
|
|
*/
|
|
}
|
|
|
|
static void mvebu_uart_stop_tx(struct uart_port *port)
|
|
{
|
|
unsigned int ctl = readl(port->membase + UART_CTRL);
|
|
|
|
ctl &= ~CTRL_TX_RDY_INT;
|
|
writel(ctl, port->membase + UART_CTRL);
|
|
}
|
|
|
|
static void mvebu_uart_start_tx(struct uart_port *port)
|
|
{
|
|
unsigned int ctl = readl(port->membase + UART_CTRL);
|
|
|
|
ctl |= CTRL_TX_RDY_INT;
|
|
writel(ctl, port->membase + UART_CTRL);
|
|
}
|
|
|
|
static void mvebu_uart_stop_rx(struct uart_port *port)
|
|
{
|
|
unsigned int ctl = readl(port->membase + UART_CTRL);
|
|
|
|
ctl &= ~CTRL_RX_INT;
|
|
writel(ctl, port->membase + UART_CTRL);
|
|
}
|
|
|
|
static void mvebu_uart_break_ctl(struct uart_port *port, int brk)
|
|
{
|
|
unsigned int ctl;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
ctl = readl(port->membase + UART_CTRL);
|
|
if (brk == -1)
|
|
ctl |= CTRL_SND_BRK_SEQ;
|
|
else
|
|
ctl &= ~CTRL_SND_BRK_SEQ;
|
|
writel(ctl, port->membase + UART_CTRL);
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static void mvebu_uart_rx_chars(struct uart_port *port, unsigned int status)
|
|
{
|
|
struct tty_port *tport = &port->state->port;
|
|
unsigned char ch = 0;
|
|
char flag = 0;
|
|
|
|
do {
|
|
if (status & STAT_RX_RDY) {
|
|
ch = readl(port->membase + UART_RBR);
|
|
ch &= 0xff;
|
|
flag = TTY_NORMAL;
|
|
port->icount.rx++;
|
|
|
|
if (status & STAT_PAR_ERR)
|
|
port->icount.parity++;
|
|
}
|
|
|
|
if (status & STAT_BRK_DET) {
|
|
port->icount.brk++;
|
|
status &= ~(STAT_FRM_ERR | STAT_PAR_ERR);
|
|
if (uart_handle_break(port))
|
|
goto ignore_char;
|
|
}
|
|
|
|
if (status & STAT_OVR_ERR)
|
|
port->icount.overrun++;
|
|
|
|
if (status & STAT_FRM_ERR)
|
|
port->icount.frame++;
|
|
|
|
if (uart_handle_sysrq_char(port, ch))
|
|
goto ignore_char;
|
|
|
|
if (status & port->ignore_status_mask & STAT_PAR_ERR)
|
|
status &= ~STAT_RX_RDY;
|
|
|
|
status &= port->read_status_mask;
|
|
|
|
if (status & STAT_PAR_ERR)
|
|
flag = TTY_PARITY;
|
|
|
|
status &= ~port->ignore_status_mask;
|
|
|
|
if (status & STAT_RX_RDY)
|
|
tty_insert_flip_char(tport, ch, flag);
|
|
|
|
if (status & STAT_BRK_DET)
|
|
tty_insert_flip_char(tport, 0, TTY_BREAK);
|
|
|
|
if (status & STAT_FRM_ERR)
|
|
tty_insert_flip_char(tport, 0, TTY_FRAME);
|
|
|
|
if (status & STAT_OVR_ERR)
|
|
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
|
|
|
|
ignore_char:
|
|
status = readl(port->membase + UART_STAT);
|
|
} while (status & (STAT_RX_RDY | STAT_BRK_DET));
|
|
|
|
tty_flip_buffer_push(tport);
|
|
}
|
|
|
|
static void mvebu_uart_tx_chars(struct uart_port *port, unsigned int status)
|
|
{
|
|
struct circ_buf *xmit = &port->state->xmit;
|
|
unsigned int count;
|
|
unsigned int st;
|
|
|
|
if (port->x_char) {
|
|
writel(port->x_char, port->membase + UART_TSH);
|
|
port->icount.tx++;
|
|
port->x_char = 0;
|
|
return;
|
|
}
|
|
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
|
|
mvebu_uart_stop_tx(port);
|
|
return;
|
|
}
|
|
|
|
for (count = 0; count < port->fifosize; count++) {
|
|
writel(xmit->buf[xmit->tail], port->membase + UART_TSH);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
port->icount.tx++;
|
|
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
|
|
st = readl(port->membase + UART_STAT);
|
|
if (st & STAT_TX_FIFO_FUL)
|
|
break;
|
|
}
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(port);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
mvebu_uart_stop_tx(port);
|
|
}
|
|
|
|
static irqreturn_t mvebu_uart_isr(int irq, void *dev_id)
|
|
{
|
|
struct uart_port *port = (struct uart_port *)dev_id;
|
|
unsigned int st = readl(port->membase + UART_STAT);
|
|
|
|
if (st & (STAT_RX_RDY | STAT_OVR_ERR | STAT_FRM_ERR | STAT_BRK_DET))
|
|
mvebu_uart_rx_chars(port, st);
|
|
|
|
if (st & STAT_TX_RDY)
|
|
mvebu_uart_tx_chars(port, st);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mvebu_uart_startup(struct uart_port *port)
|
|
{
|
|
int ret;
|
|
|
|
writel(CTRL_TXFIFO_RST | CTRL_RXFIFO_RST,
|
|
port->membase + UART_CTRL);
|
|
udelay(1);
|
|
writel(CTRL_RX_INT, port->membase + UART_CTRL);
|
|
|
|
ret = request_irq(port->irq, mvebu_uart_isr, port->irqflags, "serial",
|
|
port);
|
|
if (ret) {
|
|
dev_err(port->dev, "failed to request irq\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mvebu_uart_shutdown(struct uart_port *port)
|
|
{
|
|
writel(0, port->membase + UART_CTRL);
|
|
}
|
|
|
|
static void mvebu_uart_set_termios(struct uart_port *port,
|
|
struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int baud;
|
|
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
port->read_status_mask = STAT_RX_RDY | STAT_OVR_ERR |
|
|
STAT_TX_RDY | STAT_TX_FIFO_FUL;
|
|
|
|
if (termios->c_iflag & INPCK)
|
|
port->read_status_mask |= STAT_FRM_ERR | STAT_PAR_ERR;
|
|
|
|
port->ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
port->ignore_status_mask |=
|
|
STAT_FRM_ERR | STAT_PAR_ERR | STAT_OVR_ERR;
|
|
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
port->ignore_status_mask |= STAT_RX_RDY | STAT_BRK_ERR;
|
|
|
|
if (old)
|
|
tty_termios_copy_hw(termios, old);
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 0, 460800);
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static const char *mvebu_uart_type(struct uart_port *port)
|
|
{
|
|
return MVEBU_UART_TYPE;
|
|
}
|
|
|
|
static void mvebu_uart_release_port(struct uart_port *port)
|
|
{
|
|
/* Nothing to do here */
|
|
}
|
|
|
|
static int mvebu_uart_request_port(struct uart_port *port)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
static int mvebu_uart_get_poll_char(struct uart_port *port)
|
|
{
|
|
unsigned int st = readl(port->membase + UART_STAT);
|
|
|
|
if (!(st & STAT_RX_RDY))
|
|
return NO_POLL_CHAR;
|
|
|
|
return readl(port->membase + UART_RBR);
|
|
}
|
|
|
|
static void mvebu_uart_put_poll_char(struct uart_port *port, unsigned char c)
|
|
{
|
|
unsigned int st;
|
|
|
|
for (;;) {
|
|
st = readl(port->membase + UART_STAT);
|
|
|
|
if (!(st & STAT_TX_FIFO_FUL))
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
writel(c, port->membase + UART_TSH);
|
|
}
|
|
#endif
|
|
|
|
static const struct uart_ops mvebu_uart_ops = {
|
|
.tx_empty = mvebu_uart_tx_empty,
|
|
.set_mctrl = mvebu_uart_set_mctrl,
|
|
.get_mctrl = mvebu_uart_get_mctrl,
|
|
.stop_tx = mvebu_uart_stop_tx,
|
|
.start_tx = mvebu_uart_start_tx,
|
|
.stop_rx = mvebu_uart_stop_rx,
|
|
.break_ctl = mvebu_uart_break_ctl,
|
|
.startup = mvebu_uart_startup,
|
|
.shutdown = mvebu_uart_shutdown,
|
|
.set_termios = mvebu_uart_set_termios,
|
|
.type = mvebu_uart_type,
|
|
.release_port = mvebu_uart_release_port,
|
|
.request_port = mvebu_uart_request_port,
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
.poll_get_char = mvebu_uart_get_poll_char,
|
|
.poll_put_char = mvebu_uart_put_poll_char,
|
|
#endif
|
|
};
|
|
|
|
/* Console Driver Operations */
|
|
|
|
#ifdef CONFIG_SERIAL_MVEBU_CONSOLE
|
|
/* Early Console */
|
|
static void mvebu_uart_putc(struct uart_port *port, int c)
|
|
{
|
|
unsigned int st;
|
|
|
|
for (;;) {
|
|
st = readl(port->membase + UART_STAT);
|
|
if (!(st & STAT_TX_FIFO_FUL))
|
|
break;
|
|
}
|
|
|
|
writel(c, port->membase + UART_TSH);
|
|
|
|
for (;;) {
|
|
st = readl(port->membase + UART_STAT);
|
|
if (st & STAT_TX_FIFO_EMP)
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void mvebu_uart_putc_early_write(struct console *con,
|
|
const char *s,
|
|
unsigned n)
|
|
{
|
|
struct earlycon_device *dev = con->data;
|
|
|
|
uart_console_write(&dev->port, s, n, mvebu_uart_putc);
|
|
}
|
|
|
|
static int __init
|
|
mvebu_uart_early_console_setup(struct earlycon_device *device,
|
|
const char *opt)
|
|
{
|
|
if (!device->port.membase)
|
|
return -ENODEV;
|
|
|
|
device->con->write = mvebu_uart_putc_early_write;
|
|
|
|
return 0;
|
|
}
|
|
|
|
EARLYCON_DECLARE(ar3700_uart, mvebu_uart_early_console_setup);
|
|
OF_EARLYCON_DECLARE(ar3700_uart, "marvell,armada-3700-uart",
|
|
mvebu_uart_early_console_setup);
|
|
|
|
static void wait_for_xmitr(struct uart_port *port)
|
|
{
|
|
u32 val;
|
|
|
|
readl_poll_timeout_atomic(port->membase + UART_STAT, val,
|
|
(val & STAT_TX_EMP), 1, 10000);
|
|
}
|
|
|
|
static void mvebu_uart_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
wait_for_xmitr(port);
|
|
writel(ch, port->membase + UART_TSH);
|
|
}
|
|
|
|
static void mvebu_uart_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
struct uart_port *port = &mvebu_uart_ports[co->index];
|
|
unsigned long flags;
|
|
unsigned int ier;
|
|
int locked = 1;
|
|
|
|
if (oops_in_progress)
|
|
locked = spin_trylock_irqsave(&port->lock, flags);
|
|
else
|
|
spin_lock_irqsave(&port->lock, flags);
|
|
|
|
ier = readl(port->membase + UART_CTRL) &
|
|
(CTRL_RX_INT | CTRL_TX_RDY_INT);
|
|
writel(0, port->membase + UART_CTRL);
|
|
|
|
uart_console_write(port, s, count, mvebu_uart_console_putchar);
|
|
|
|
wait_for_xmitr(port);
|
|
|
|
if (ier)
|
|
writel(ier, port->membase + UART_CTRL);
|
|
|
|
if (locked)
|
|
spin_unlock_irqrestore(&port->lock, flags);
|
|
}
|
|
|
|
static int mvebu_uart_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_port *port;
|
|
int baud = 9600;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (co->index < 0 || co->index >= MVEBU_NR_UARTS)
|
|
return -EINVAL;
|
|
|
|
port = &mvebu_uart_ports[co->index];
|
|
|
|
if (!port->mapbase || !port->membase) {
|
|
pr_debug("console on ttyMV%i not present\n", co->index);
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct uart_driver mvebu_uart_driver;
|
|
|
|
static struct console mvebu_uart_console = {
|
|
.name = "ttyMV",
|
|
.write = mvebu_uart_console_write,
|
|
.device = uart_console_device,
|
|
.setup = mvebu_uart_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &mvebu_uart_driver,
|
|
};
|
|
|
|
static int __init mvebu_uart_console_init(void)
|
|
{
|
|
register_console(&mvebu_uart_console);
|
|
return 0;
|
|
}
|
|
|
|
console_initcall(mvebu_uart_console_init);
|
|
|
|
|
|
#endif /* CONFIG_SERIAL_MVEBU_CONSOLE */
|
|
|
|
static struct uart_driver mvebu_uart_driver = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "mvebu_serial",
|
|
.dev_name = "ttyMV",
|
|
.nr = MVEBU_NR_UARTS,
|
|
#ifdef CONFIG_SERIAL_MVEBU_CONSOLE
|
|
.cons = &mvebu_uart_console,
|
|
#endif
|
|
};
|
|
|
|
static int mvebu_uart_probe(struct platform_device *pdev)
|
|
{
|
|
struct resource *reg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
struct uart_port *port;
|
|
struct mvebu_uart_data *data;
|
|
int ret;
|
|
|
|
if (!reg || !irq) {
|
|
dev_err(&pdev->dev, "no registers/irq defined\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
port = &mvebu_uart_ports[0];
|
|
|
|
spin_lock_init(&port->lock);
|
|
|
|
port->dev = &pdev->dev;
|
|
port->type = PORT_MVEBU;
|
|
port->ops = &mvebu_uart_ops;
|
|
port->regshift = 0;
|
|
|
|
port->fifosize = 32;
|
|
port->iotype = UPIO_MEM32;
|
|
port->flags = UPF_FIXED_PORT;
|
|
port->line = 0; /* single port: force line number to 0 */
|
|
|
|
port->irq = irq->start;
|
|
port->irqflags = 0;
|
|
port->mapbase = reg->start;
|
|
|
|
port->membase = devm_ioremap_resource(&pdev->dev, reg);
|
|
if (IS_ERR(port->membase))
|
|
return -PTR_ERR(port->membase);
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_uart_data),
|
|
GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->port = port;
|
|
|
|
port->private_data = data;
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
ret = uart_add_one_port(&mvebu_uart_driver, port);
|
|
if (ret)
|
|
return ret;
|
|
return 0;
|
|
}
|
|
|
|
/* Match table for of_platform binding */
|
|
static const struct of_device_id mvebu_uart_of_match[] = {
|
|
{ .compatible = "marvell,armada-3700-uart", },
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver mvebu_uart_platform_driver = {
|
|
.probe = mvebu_uart_probe,
|
|
.driver = {
|
|
.name = "mvebu-uart",
|
|
.of_match_table = of_match_ptr(mvebu_uart_of_match),
|
|
.suppress_bind_attrs = true,
|
|
},
|
|
};
|
|
|
|
static int __init mvebu_uart_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = uart_register_driver(&mvebu_uart_driver);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = platform_driver_register(&mvebu_uart_platform_driver);
|
|
if (ret)
|
|
uart_unregister_driver(&mvebu_uart_driver);
|
|
|
|
return ret;
|
|
}
|
|
arch_initcall(mvebu_uart_init);
|