268 lines
6.0 KiB
C
268 lines
6.0 KiB
C
/*
|
|
* drivers/i2c/chips/ds1374.c
|
|
*
|
|
* I2C client/driver for the Maxim/Dallas DS1374 Real-Time Clock
|
|
*
|
|
* Author: Randy Vinson <rvinson@mvista.com>
|
|
*
|
|
* Based on the m41t00.c by Mark Greer <mgreer@mvista.com>
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
/*
|
|
* This i2c client/driver wedges between the drivers/char/genrtc.c RTC
|
|
* interface and the SMBus interface of the i2c subsystem.
|
|
* It would be more efficient to use i2c msgs/i2c_transfer directly but, as
|
|
* recommened in .../Documentation/i2c/writing-clients section
|
|
* "Sending and receiving", using SMBus level communication is preferred.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/rtc.h>
|
|
#include <linux/bcd.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#define DS1374_REG_TOD0 0x00
|
|
#define DS1374_REG_TOD1 0x01
|
|
#define DS1374_REG_TOD2 0x02
|
|
#define DS1374_REG_TOD3 0x03
|
|
#define DS1374_REG_WDALM0 0x04
|
|
#define DS1374_REG_WDALM1 0x05
|
|
#define DS1374_REG_WDALM2 0x06
|
|
#define DS1374_REG_CR 0x07
|
|
#define DS1374_REG_SR 0x08
|
|
#define DS1374_REG_SR_OSF 0x80
|
|
#define DS1374_REG_TCR 0x09
|
|
|
|
#define DS1374_DRV_NAME "ds1374"
|
|
|
|
static DEFINE_MUTEX(ds1374_mutex);
|
|
|
|
static struct i2c_driver ds1374_driver;
|
|
static struct i2c_client *save_client;
|
|
|
|
static unsigned short ignore[] = { I2C_CLIENT_END };
|
|
static unsigned short normal_addr[] = { 0x68, I2C_CLIENT_END };
|
|
|
|
static struct i2c_client_address_data addr_data = {
|
|
.normal_i2c = normal_addr,
|
|
.probe = ignore,
|
|
.ignore = ignore,
|
|
};
|
|
|
|
static ulong ds1374_read_rtc(void)
|
|
{
|
|
ulong time = 0;
|
|
int reg = DS1374_REG_WDALM0;
|
|
|
|
while (reg--) {
|
|
s32 tmp;
|
|
if ((tmp = i2c_smbus_read_byte_data(save_client, reg)) < 0) {
|
|
dev_warn(&save_client->dev,
|
|
"can't read from rtc chip\n");
|
|
return 0;
|
|
}
|
|
time = (time << 8) | (tmp & 0xff);
|
|
}
|
|
return time;
|
|
}
|
|
|
|
static void ds1374_write_rtc(ulong time)
|
|
{
|
|
int reg;
|
|
|
|
for (reg = DS1374_REG_TOD0; reg < DS1374_REG_WDALM0; reg++) {
|
|
if (i2c_smbus_write_byte_data(save_client, reg, time & 0xff)
|
|
< 0) {
|
|
dev_warn(&save_client->dev,
|
|
"can't write to rtc chip\n");
|
|
break;
|
|
}
|
|
time = time >> 8;
|
|
}
|
|
}
|
|
|
|
static void ds1374_check_rtc_status(void)
|
|
{
|
|
s32 tmp;
|
|
|
|
tmp = i2c_smbus_read_byte_data(save_client, DS1374_REG_SR);
|
|
if (tmp < 0) {
|
|
dev_warn(&save_client->dev,
|
|
"can't read status from rtc chip\n");
|
|
return;
|
|
}
|
|
if (tmp & DS1374_REG_SR_OSF) {
|
|
dev_warn(&save_client->dev,
|
|
"oscillator discontinuity flagged, time unreliable\n");
|
|
tmp &= ~DS1374_REG_SR_OSF;
|
|
tmp = i2c_smbus_write_byte_data(save_client, DS1374_REG_SR,
|
|
tmp & 0xff);
|
|
if (tmp < 0)
|
|
dev_warn(&save_client->dev,
|
|
"can't clear discontinuity notification\n");
|
|
}
|
|
}
|
|
|
|
ulong ds1374_get_rtc_time(void)
|
|
{
|
|
ulong t1, t2;
|
|
int limit = 10; /* arbitrary retry limit */
|
|
|
|
mutex_lock(&ds1374_mutex);
|
|
|
|
/*
|
|
* Since the reads are being performed one byte at a time using
|
|
* the SMBus vs a 4-byte i2c transfer, there is a chance that a
|
|
* carry will occur during the read. To detect this, 2 reads are
|
|
* performed and compared.
|
|
*/
|
|
do {
|
|
t1 = ds1374_read_rtc();
|
|
t2 = ds1374_read_rtc();
|
|
} while (t1 != t2 && limit--);
|
|
|
|
mutex_unlock(&ds1374_mutex);
|
|
|
|
if (t1 != t2) {
|
|
dev_warn(&save_client->dev,
|
|
"can't get consistent time from rtc chip\n");
|
|
t1 = 0;
|
|
}
|
|
|
|
return t1;
|
|
}
|
|
|
|
static ulong new_time;
|
|
|
|
static void ds1374_set_work(struct work_struct *work)
|
|
{
|
|
ulong t1, t2;
|
|
int limit = 10; /* arbitrary retry limit */
|
|
|
|
t1 = new_time;
|
|
|
|
mutex_lock(&ds1374_mutex);
|
|
|
|
/*
|
|
* Since the writes are being performed one byte at a time using
|
|
* the SMBus vs a 4-byte i2c transfer, there is a chance that a
|
|
* carry will occur during the write. To detect this, the write
|
|
* value is read back and compared.
|
|
*/
|
|
do {
|
|
ds1374_write_rtc(t1);
|
|
t2 = ds1374_read_rtc();
|
|
} while (t1 != t2 && limit--);
|
|
|
|
mutex_unlock(&ds1374_mutex);
|
|
|
|
if (t1 != t2)
|
|
dev_warn(&save_client->dev,
|
|
"can't confirm time set from rtc chip\n");
|
|
}
|
|
|
|
static struct workqueue_struct *ds1374_workqueue;
|
|
|
|
static DECLARE_WORK(ds1374_work, ds1374_set_work);
|
|
|
|
int ds1374_set_rtc_time(ulong nowtime)
|
|
{
|
|
new_time = nowtime;
|
|
|
|
if (in_interrupt())
|
|
queue_work(ds1374_workqueue, &ds1374_work);
|
|
else
|
|
ds1374_set_work(NULL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
*****************************************************************************
|
|
*
|
|
* Driver Interface
|
|
*
|
|
*****************************************************************************
|
|
*/
|
|
static int ds1374_probe(struct i2c_adapter *adap, int addr, int kind)
|
|
{
|
|
struct i2c_client *client;
|
|
int rc;
|
|
|
|
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
|
|
if (!client)
|
|
return -ENOMEM;
|
|
|
|
strncpy(client->name, DS1374_DRV_NAME, I2C_NAME_SIZE);
|
|
client->addr = addr;
|
|
client->adapter = adap;
|
|
client->driver = &ds1374_driver;
|
|
|
|
ds1374_workqueue = create_singlethread_workqueue("ds1374");
|
|
if (!ds1374_workqueue) {
|
|
kfree(client);
|
|
return -ENOMEM; /* most expected reason */
|
|
}
|
|
|
|
if ((rc = i2c_attach_client(client)) != 0) {
|
|
kfree(client);
|
|
return rc;
|
|
}
|
|
|
|
save_client = client;
|
|
|
|
ds1374_check_rtc_status();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ds1374_attach(struct i2c_adapter *adap)
|
|
{
|
|
return i2c_probe(adap, &addr_data, ds1374_probe);
|
|
}
|
|
|
|
static int ds1374_detach(struct i2c_client *client)
|
|
{
|
|
int rc;
|
|
|
|
if ((rc = i2c_detach_client(client)) == 0) {
|
|
kfree(i2c_get_clientdata(client));
|
|
destroy_workqueue(ds1374_workqueue);
|
|
}
|
|
return rc;
|
|
}
|
|
|
|
static struct i2c_driver ds1374_driver = {
|
|
.driver = {
|
|
.name = DS1374_DRV_NAME,
|
|
},
|
|
.id = I2C_DRIVERID_DS1374,
|
|
.attach_adapter = ds1374_attach,
|
|
.detach_client = ds1374_detach,
|
|
};
|
|
|
|
static int __init ds1374_init(void)
|
|
{
|
|
return i2c_add_driver(&ds1374_driver);
|
|
}
|
|
|
|
static void __exit ds1374_exit(void)
|
|
{
|
|
i2c_del_driver(&ds1374_driver);
|
|
}
|
|
|
|
module_init(ds1374_init);
|
|
module_exit(ds1374_exit);
|
|
|
|
MODULE_AUTHOR("Randy Vinson <rvinson@mvista.com>");
|
|
MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC I2C Client Driver");
|
|
MODULE_LICENSE("GPL");
|