OpenCloudOS-Kernel/arch/mn10300/kernel
Linus Torvalds b235beea9e Clarify naming of thread info/stack allocators
We've had the thread info allocated together with the thread stack for
most architectures for a long time (since the thread_info was split off
from the task struct), but that is about to change.

But the patches that move the thread info to be off-stack (and a part of
the task struct instead) made it clear how confused the allocator and
freeing functions are.

Because the common case was that we share an allocation with the thread
stack and the thread_info, the two pointers were identical.  That
identity then meant that we would have things like

	ti = alloc_thread_info_node(tsk, node);
	...
	tsk->stack = ti;

which certainly _worked_ (since stack and thread_info have the same
value), but is rather confusing: why are we assigning a thread_info to
the stack? And if we move the thread_info away, the "confusing" code
just gets to be entirely bogus.

So remove all this confusion, and make it clear that we are doing the
stack allocation by renaming and clarifying the function names to be
about the stack.  The fact that the thread_info then shares the
allocation is an implementation detail, and not really about the
allocation itself.

This is a pure renaming and type fix: we pass in the same pointer, it's
just that we clarify what the pointer means.

The ia64 code that actually only has one single allocation (for all of
task_struct, thread_info and kernel thread stack) now looks a bit odd,
but since "tsk->stack" is actually not even used there, that oddity
doesn't matter.  It would be a separate thing to clean that up, I
intentionally left the ia64 changes as a pure brute-force renaming and
type change.

Acked-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-06-24 15:09:37 -07:00
..
Makefile mn10300: switch to generic kernel_execve() 2012-10-01 00:53:59 -04:00
asm-offsets.c mn10300: Remove signal translation and exec_domain 2015-04-12 20:58:25 +02:00
cevt-mn10300.c Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2015-09-01 14:33:35 -07:00
csrc-mn10300.c MN10300: Use clocksource_register_hz() 2011-03-18 16:52:50 +00:00
entry.S mn10300: Fix crash just after starting userspace on !CONFIG_PREEMPT 2013-09-10 14:54:59 -07:00
fpu-low.S MN10300: Make the FPU operate in non-lazy mode under SMP 2010-10-27 17:28:52 +01:00
fpu-nofpu-low.S MN10300: Make the FPU operate in non-lazy mode under SMP 2010-10-27 17:28:52 +01:00
fpu-nofpu.c arch/mn10300/kernel/fpu-nofpu.c: needs asm/elf.h 2016-03-17 15:09:34 -07:00
fpu.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
gdb-io-serial-low.S MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
gdb-io-serial.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
gdb-io-ttysm-low.S Separate out the proc- and unit-specific header directories from the general 2009-04-10 14:33:48 +01:00
gdb-io-ttysm.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
gdb-low.S
gdb-stub.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
head.S MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
internal.h mn10300: split ret_from_fork, simplify kernel_thread() 2012-10-01 00:53:24 -04:00
io.c
irq.c mn10300/irq: Use access helper irq_data_get_affinity_mask() 2015-07-31 22:20:04 +02:00
kgdb.c Clarify naming of thread info/stack allocators 2016-06-24 15:09:37 -07:00
kprobes.c MN10300: Allow some cacheflushes to be avoided if cache snooping is available 2010-10-27 17:28:46 +01:00
mn10300-debug.c
mn10300-serial-low.S MN10300: fix SMP synchronization between txdma and serial driver 2012-12-12 15:46:14 +00:00
mn10300-serial.c mn10300: Remove deprecated IRQF_DISABLED 2014-03-04 21:47:51 +01:00
mn10300-serial.h MN10300: ttySM: clean up unnecessary casting 2012-12-12 15:46:14 +00:00
mn10300-watchdog-low.S MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
mn10300-watchdog.c mn10300: Use the core irq stats function 2014-03-04 17:37:53 +01:00
mn10300_ksyms.c mn10300: provide __ucmpdi2() for MN10300 2008-07-04 10:40:07 -07:00
module.c modules: make arch's use default loader hooks 2011-07-24 22:06:04 +09:30
process.c exit_thread: accept a task parameter to be exited 2016-05-20 17:58:30 -07:00
profile-low.S
profile.c MN10300: And Panasonic AM34 subarch and implement SMP 2010-10-27 17:28:55 +01:00
ptrace.c Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
rtc.c set_rtc_mmss: show warning message only once 2011-01-13 08:03:07 -08:00
setup.c mn10300/PCI: Remove unused pci_mem_start 2013-10-07 15:12:45 -06:00
sigframe.h
signal.c mn10300: Remove signal translation and exec_domain 2015-04-12 20:58:25 +02:00
smp-low.S Disintegrate asm/system.h for MN10300 2012-03-28 18:30:02 +01:00
smp.c arch/hotplug: Call into idle with a proper state 2016-03-01 20:36:57 +01:00
switch_to.S MN10300: Emulate single stepping in KGDB on MN10300 2011-03-18 16:54:32 +00:00
sys_mn10300.c Add generic sys_ipc wrapper 2010-03-12 15:52:32 -08:00
time.c MN10300: Use clockevents_calc_mult_shift() 2011-03-18 16:52:50 +00:00
traps.c dump_stack: consolidate dump_stack() implementations and unify their behaviors 2013-04-30 17:04:02 -07:00
vmlinux.lds.S MN10300: Add missing _sdata declaration 2011-06-07 19:03:53 -07:00