UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/boot/dts/exynos5420-arndale-octa.dts

394 lines
9.1 KiB
Plaintext
Raw Blame History

/*
* Samsung's Exynos5420 based Arndale Octa board device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "exynos5420.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/clock/samsung,s2mps11.h>
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
memory {
reg = <0x20000000 0x80000000>;
};
chosen {
bootargs = "console=ttySAC3,115200";
};
firmware@02073000 {
compatible = "samsung,secure-firmware";
reg = <0x02073000 0x1000>;
};
fixed-rate-clocks {
oscclk {
compatible = "samsung,exynos5420-oscclk";
clock-frequency = <24000000>;
};
};
gpio_keys {
compatible = "gpio-keys";
wakeup {
label = "SW-TACT1";
gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
};
&usbdrd_dwc3_1 {
dr_mode = "host";
};
&cci {
status = "disabled";
};
&hsi2c_4 {
status = "okay";
s2mps11_pmic@66 {
compatible = "samsung,s2mps11-pmic";
reg = <0x66>;
s2mps11,buck2-ramp-delay = <12>;
s2mps11,buck34-ramp-delay = <12>;
s2mps11,buck16-ramp-delay = <12>;
s2mps11,buck6-ramp-enable = <1>;
s2mps11,buck2-ramp-enable = <1>;
s2mps11,buck3-ramp-enable = <1>;
s2mps11,buck4-ramp-enable = <1>;
interrupt-parent = <&gpx3>;
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
pinctrl-names = "default";
pinctrl-0 = <&s2mps11_irq>;
s2mps11_osc: clocks {
#clock-cells = <1>;
clock-output-names = "s2mps11_ap",
"s2mps11_cp", "s2mps11_bt";
};
regulators {
ldo1_reg: LDO1 {
regulator-name = "PVDD_ALIVE_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo2_reg: LDO2 {
regulator-name = "PVDD_APIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo3_reg: LDO3 {
regulator-name = "PVDD_APIO_MMCON_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: LDO4 {
regulator-name = "PVDD_ADC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo5_reg: LDO5 {
regulator-name = "PVDD_PLL_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo6_reg: LDO6 {
regulator-name = "PVDD_ANAIP_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
};
ldo7_reg: LDO7 {
regulator-name = "PVDD_ANAIP_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo8_reg: LDO8 {
regulator-name = "PVDD_ABB_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo9_reg: LDO9 {
regulator-name = "PVDD_USB_3V3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
regulator-name = "PVDD_PRE_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo11_reg: LDO11 {
regulator-name = "PVDD_USB_1V0";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
ldo12_reg: LDO12 {
regulator-name = "PVDD_HSIC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo13_reg: LDO13 {
regulator-name = "PVDD_APIO_MMCOFF_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo15_reg: LDO15 {
regulator-name = "PVDD_PERI_2V8";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo16_reg: LDO16 {
regulator-name = "PVDD_PERI_3V3";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
};
ldo18_reg: LDO18 {
regulator-name = "PVDD_EMMC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo19_reg: LDO19 {
regulator-name = "PVDD_TFLASH_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo20_reg: LDO20 {
regulator-name = "PVDD_BTWIFI_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo21_reg: LDO21 {
regulator-name = "PVDD_CAM1IO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo23_reg: LDO23 {
regulator-name = "PVDD_MIFS_1V1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo24_reg: LDO24 {
regulator-name = "PVDD_CAM1_AVDD_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
ldo26_reg: LDO26 {
regulator-name = "PVDD_CAM0_AF_2V8";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
ldo27_reg: LDO27 {
regulator-name = "PVDD_G3DS_1V0";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo28_reg: LDO28 {
regulator-name = "PVDD_TSP_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
ldo29_reg: LDO29 {
regulator-name = "PVDD_AUDIO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo31_reg: LDO31 {
regulator-name = "PVDD_PERI_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo32_reg: LDO32 {
regulator-name = "PVDD_LCD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo33_reg: LDO33 {
regulator-name = "PVDD_CAM0IO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo35_reg: LDO35 {
regulator-name = "PVDD_CAM0_DVDD_1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
ldo38_reg: LDO38 {
regulator-name = "PVDD_CAM0_AVDD_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
buck1_reg: BUCK1 {
regulator-name = "PVDD_MIF_1V1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
buck2_reg: BUCK2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
buck3_reg: BUCK3 {
regulator-name = "PVDD_INT_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
buck4_reg: BUCK4 {
regulator-name = "PVDD_G3D_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
};
buck5_reg: BUCK5 {
regulator-name = "PVDD_LPDDR3_1V2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
buck6_reg: BUCK6 {
regulator-name = "PVDD_KFC_1V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
};
buck7_reg: BUCK7 {
regulator-name = "VIN_LLDO_1V4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1400000>;
regulator-always-on;
};
buck8_reg: BUCK8 {
regulator-name = "VIN_MLDO_2V0";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
buck9_reg: BUCK9 {
regulator-name = "VIN_HLDO_3V5";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3500000>;
regulator-always-on;
};
buck10_reg: BUCK10 {
regulator-name = "PVDD_EMMCF_2V8";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
};
};
};
&mfc {
samsung,mfc-r = <0x43000000 0x800000>;
samsung,mfc-l = <0x51000000 0x800000>;
};
&mmc_0 {
status = "okay";
broken-cd;
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <0 4>;
samsung,dw-mshc-ddr-timing = <0 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
vmmc-supply = <&ldo10_reg>;
bus-width = <8>;
cap-mmc-highspeed;
};
&mmc_2 {
status = "okay";
card-detect-delay = <200>;
samsung,dw-mshc-ciu-div = <3>;
samsung,dw-mshc-sdr-timing = <2 3>;
samsung,dw-mshc-ddr-timing = <1 2>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
vmmc-supply = <&ldo19_reg>;
vqmmc-supply = <&ldo13_reg>;
bus-width = <4>;
cap-sd-highspeed;
};
&pinctrl_0 {
s2mps11_irq: s2mps11-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0xf>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
};
&rtc {
status = "okay";
clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
};
Reference in New Issue View Git Blame Copy Permalink